I am installing Itunes after a cpu restore and am getting this error reading "the file Itunes cannot be read because it was created by a newer version of itunes. I have downloaded the latest version and this is what i get when i try open the program
Hi all, please help me reinstall Itunes onto my PC. When i did a pc refresh, it deleted my itunes and microsoft office. I am now trying to reinstall itunes and am getting the following message each time i try run the new downloaded version ( i have tried a few older and the latest one and all show the same message)
the file Itunes cannot be read because it was created by a newer version of itunes. I have downloaded the latest version
Cheers
Andrew
Tell us some version numbers please, of your Mac OS versions and iTunes versions on both computers (two eMacs yes?).
dlrobinson49 wrote:
I guess I must have had a newer version ofiTunes on my defunt eMac....
That is a pretty good guess.Try updating the second eMac's iTunes to at least the version that was on the first.
Similar Messages
-
My Itunes wont open - reading error "cannot be read because it was created by a newer verdion of itunes"
should i uninstall/ reinstal.
will i loose all my music nd playlists?This technique should work...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
Itunes.itl cannot be played because it was created by a newer version of itunes
I cannot open itunes. I am getting this error message: itunes.itl cannot be played because it was created by a newer version of i tunes.
Hello AS1590,
That definitely sounds frustrating.
I recommend completely uninstalling iTunes and all related components, as outlined in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Then, once you have removed the components in order, let's reinstall via http://apple.com/itunes/download
If the issue persists, please refer to the following article:
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
Thanks,
Matt M. -
DOWNLOADED 11.1 VERSION NOW I GET THIS: THE FILE ITUNES LIBRARY.ITL CANNOT BE READ BECAUSE IT WAS CREATED BY A NEWER VERION OF ITUNES
Unless you've recently attempted to downgrade iTunes this is probably a sign of a corrupt library file. See Empty/corrupt library after upgrade/crash.
tt2 -
My iTunes won't open and I am getting message "the file iTunes library .itl"cannot be read because it was created by a newer version of iTunes. Anyone have a suggestion?
I don't know why this error occurs, unless you have attempted to downgrade iTunes.
This method should get you up and running again.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
After installing latest iTunes, I began getting R6034 Runtime Error messages, found fix of removing 5 Apple programs, reboot and reinstall iTunes. Seemed to work but now getting error message that my iTunes Library (iTunes Library.itl) cannot be read because it was created with a newer version of iTunes. Need Help!!!
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
How can I locate my iTunes library files? When I click on my iTunes icon rather than my iTunes files I receive, " The file iTunes Library.itl." cannot be read because it was created by a newer version of iTunes." I have already tried to update my iTunes program.
Had same problem and solved it without having to reinstore any music or movies:
1. Delete old Library file
2. Go to the 'Previous iTunes Libraries' folder and copy one of the earlier files - note, they have a date extension, e.g. 'iTunes Library 2011-11-01'.
3. Paste this file in your iTuners folder and rename file by removing the date extension - 'iTunes Library'
You should have all your music and paylists in tact, unless it was a really old previous file. -
Why do I this message when trying to open itunes on my desktop computer "File itunes cannot be read because it was created by a newer version of itunes" How do I overcome this?
Hello johnc1936,
Thanks for the question, and welcome to Apple Support Communities.
It sounds like we may need to recreate your iTunes Library.itl file. The following article outlines how to do so:
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Thanks,
Matt M. -
Itune library.itl cannot be read because it was created by a newer verson of itunes
I cannot open my i-tunes account. It says "The File itunes Library.itl cannot be read because it was created by a newer verson".......I restored by computer to a previous date when it was working. I've uninstalled and reinstalled i-tunes twice. HELP!!! I need my i-tunes account. I'm an ice skating instructor and I store and cut all my music for my skaters from this account. Please help!!!! Thanks
Install the current version of iTunes.
-
Help me, please. I uninstalled old iTunes because of troubleshootings. I have downloaded and installed new one. Now it says: The file "iTunes Liberary.itl" cannot be read because it was created by a newer version of iTunes." What can I do?
Hello Bebyida,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
http://www.apple.com/itunes/download/
Best of luck,
Mario -
I needed to upgrade my iTunes to register and sync a iPhone 5c. I upgraded by Apple Software and finally was able to download the upgraded iTunes. When I try to start iTunes I get this message, "The file iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. How can I repair this?
If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic! -
error message: itunes library .itl cannot be read because it was created by a newer version. I downloaded and in stalled the latest version of itunes and it did not help. What now?
Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X -
I just installed iTunes on my new laptop. When I click on the desktop icon I receive a pop up that says "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes". I have no idea what this means or what to do about it. I can't even find a file on my computer like the one referred to in the pop up. I am currently considering keeping my old laptop if it is the only way for me to continue to access iTunes. What should I do to fix this?
What version of iTunes are you using? An .itl file is something that Windows uses, or very old versions of iTunes on Mac. The library file on Macs is now .xml and has been since late iTunes 4.
Is iTunes running ok without any problems after you OK that message? If it is, then you may be able to ignore it if you can't account for why you're getting it. But make sure you take backups in case something happens in the future. -
I receive the message: The file "iTunes library.itl"cannot be read because it was created by a newer version of itunes. I do not know exactly what this means. I have Windows 7 on my computer and was able access itunes until just recently. I have tried uninstalling and reinstalling itunes multiple times and that does not work. Sometimes I can get in when immediately after installing, but then if I close it, i cannot get back in. Now, i can't get in at all.
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
just installed latest itunes to my laptop, and icon is on my homepage, but when i try to load it up, i get this message ,The File "itunes Library.itl" cannot be read because it was created by a newer version of itunes! Ive tried uninstalling it then installing again but nothing, ive ran scans on both itunes and quicktime to see what the problem is, and i just keep gettin this message! how do i fix this ANYONE please!
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash
Maybe you are looking for
-
Problems with SRW224G4 switch and Bridged Network Cards
Hello, We have recently installed a SRW224G4 switch and have discovered that when we plug our DELL PowerEdge 2900 server into the switch, the switch loses all network connectivity and all of the LED's on the switch start flashing. The server works pe
-
For the second time in as many months I have had to roll back to version 3.6.19 as the new firefox (versions 4 or 5) was unable to use 'no script', 'forecastfox' or 'download status bar'. I hope mozilla will continue to support v3.6.19 until my issue
-
This is a line of code from SDK 4.5. File ComboBoxaccImpl.as line 514: if (ComboBox(master).isDropDownOpen && index >=0 && index < ComboBox(master).dataProvider.length) I am getting here because I am extending ComboBoxGridItemEditor to use it in my e
-
Itunes doesn't want to add a m4a.mp3 audio file
Hi everybody, a friend of mine sent me some university lessons she recorded on her computer. They are m4a.mp3 files and Itunes doesn't want to read them or add them on my Ipod 6th generation. What can I do? Thanks in advance guys!
-
Labeling folders based on extension
Is it possible to label a folder based on extension? For example if I have a folder like this Pictures-WORK / Documents-WORK is it possible to get OS X to label all my folders based on the -WORK ? Kind regards, Maxime