I'am installing Oracle10g RAC and I getting the following errror, Any help
"Oracle Cluster Registry can exist only as a shared file system file or as a shared raw partition in component cluster ready services 10.1.0.2.0"
Hi,
here it clearly indicate that u should put ur cluster registry on shared file system.
so it will be on ocfs or raw partition.
because both node should be have access on it.
Similar Messages
-
I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.
gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR -
All of a sudden my iTunes stopped working, and I get the following error messages:
1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
and
2. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).
Now I've checked the forums and followed the advice of uninstalling all Apple applications, rebooting, and reinstalling iTunes.
This is not working. I've tried installing as Administrator but doesn't make any difference at all.
There must be a way to fix this? I'm not a tech geek but I want to avoid having to take my laptop back to factory settings to sort this out.
ThanksClick here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99192) -
I downloaded the latest iTunes version and now get the following error message: "This copy of iTunes is corrupted or is not installed correctly. Please re-install iTunes." Can anyone provide suggestions on what I should do next?
Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now? -
updated itunes and now get the following message.
this copy of itunes is corrupted or not installed correctly. please reinstall
what has caused this?
in my downloads folder i have itunes64Setup.exe do I just run this ?
or will this overwrite my existing data and I'll have to set up my library from scratch.
as its an ipod classic with 120 Gb of data i'd rather not have to set it up all againHello barbeedawg,
Thanks for using Apple Support Communities.
I'd like you to please follow the steps in the article below to first remove all instances of iTunes and its associated files, and then reinstall iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Take care,
Alex H. -
I installed Adobe 8.0 and keep getting the following message when I try to open it: Warning: you entered an invalid serial number in adobe 8.0. Please re install adobe under a valid serial number.
Adobe Acrobat 8.0
standalone version
Worked for years.......pc crashed.......fresh install of everything, but Acrobat will install, but I get error message when I try to use. -
trying to download update for iTunes and keep getting the following An error occurred while installing the updates.(103
Try to download direct from here.
http://www.apple.com/itunes/download/ -
I am trying to install software and am getting the following prompt.
"Installation Failed, the installer cant create the folder "var/folders/sq/2fzf3s_d2bzb21159nbwkb2r0000gn/T//install.3732dq0ogT.
How do I repair thisBack up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
i am trying to install firefox 4 and keep getting the message that you have to reboot your computer to complete the uninstall i have done this a number of times any suggestions
Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html -
I just installed Itunes on Windows7 x64 and I get the following error...
I just installed Itunes on Windows7 x64 and I get the following error when trying to open it. "Itunes cannot run because it detects a problem with Quicktime. For repair instructions click Help." When I do this all it pretty much tells me to do is reinstall which doesn't really do anything at all. Another method mentioned is to download quicktime as a stand alone installer and isntall that version again to no avail. I have no idea what to do. Thanks for your help. I can provide any information needed upon request. And yes I have uninstlaled completely restarted then reinstalled only to get the error again.
Good lord.
Right. Presumably either this one:
... or this one:
... is at the heart of matters. The second one is the more familiar one. So we'll assume (to begin with) that the first one is a rare complication of the sort of install trouble that can produce the second one.
Rather than using Revo, I'd like to try using the Windows Installer CleanUp utility to clear the installation configuration information for your Apple Software Update. Unfortunately, doing so has become more difficult
ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove". Quit CleanUp.
Now try uninstalling (again without using Revo) iTunes and QuickTime. If those uninstalls seem to go through okay, restart the PC.
Now try the iTunes reinstall again. Does it hang with that "required module" error again? or does it install smoothly this time? -
i am trying to reinstall itunes 10.5 and am getting the following error message.
An error occurred during the installation of assembly “Microsoft.VC80.CRT.type=”win32”.version=”8.0.50727.6195”.publicKeyToken=”1fc8b 3b9a1e18e3b”.processorArchitecture=”x86””. Please refer to Help and Support for more information. HRESULT:0X800736B3.
Anyone know how to fix this?same problem. tried the ff fixes from microsoft but no joy
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
other ideas would be appreciated.
cheers -
I have Photoshop CS5 Extended and it says updates available but when i download the updates it says updates failed please try again later, i have tried a few times and get the same message any help would be great i am running 64bit on windows 8.
I am running Windows 7 64 bit ultimate and have the same problem. My hard drive crashed, installed a new one and then reinstalled CS5 extended. Installation went fine, but can no longer open my camera RAW files from Photoshop (camera is a Canon EOS T2i. The message also tells me I am not eligible for the update. I am... and I cannot open my files and I could before. I can find nowhere to contact Adobe to tell me how to proceed. My daughter is all a registered user of the same product and she had no problems upgrading... we purchased ours each at the same time. I do know the difference is that I had to reinstall and she did not. If that means anything.
-
When installing iMS 5.1 I get the following fatal JRE error near the end of the installation:
When installing iMS 5.1 I get the following fatal JRE error near the end of the installation:
The application command "jre -cp "/opt/iplanet/ims5/bin/msg/imta/classes/imtaconfig.jar" com.iplanet.msg.imta.config.InitConfig -d thc-tsg.com -r thc-tsg.com -h development.thc-tsg.com -c /opt/iplanet/ims5/msg-development/imta/config" could not be run.
OS - Solaris 8
iDS 4.13The IMS installer currently hardcodes the path to a JRE that it wants to run. This JRE is the one that is included in the kit, so you <i>must</i> install the JRE that comes with it.
The only way around this is to use the embedded JRE during installation and not to set the JAVA_HOME environment variable. Check if you have it defined by issuing the command 'echo $JAVA_HOME'. -
PSE 9 was running fine but will not start now and I get the following message: This application has requested the Runtime to terminate in an unusual way.
I have an HP Desktop running XP Professional and tried Restore but it didn"t help. I was just going to uninstall and re-install but I can't get in to deactivate.See if anything here helps:
Troubleshoot C++ runtime errors | Adobe products | Windows -
I am trying to open iTunes on my Windows 7 PC and am getting the following message...the itunes library can not be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder. Any ideas?
Let's try this first. Hold down the Shift key while you try to launch iTunes. You should eventually see the following dialog:
Click "Choose library". Browse to inside the following location (depending on what operating system you're running):
Operating System
Default location of iTunes library
Microsoft Windows XP
\Documents and Settings\[your username]\My Documents\My Music\iTunes\
Microsoft Windows Vista
\Users\[your username]\Music\iTunes\
Microsoft Windows 7
\Users\[your username]\My Music\iTunes\
... and open the iTunes library you find in there.
Maybe you are looking for
-
Help me, driver's HP G42- 455TX .
Dear Modes! I've just reinstalled window7 ultimate-32 bits for my laptop HP G42- 455TX but lacks some drivers. please help me to get enough. 1, AMD High-Definition Graphics Driver 2, Realtek High-Definition (HD) Audio Driver 3, Synaptics TouchPad
-
Best webcam / camera for iChat - definitive answer?
So, loving my iChat with iSight, I need to get a friend a camera to use with their Mac Pro (2007) / Leopard to communicate with us; and of course, not having the luxury of iSight to purchase anymore, is there a definitive 'best' camera to buy that wo
-
Video Effect to reduce lighting overexposure
Hey Everybody, I am new to this forum and this my first post, so first off i'd like to say hi to everybody. I am working on editing video i shot of a musician performing in a coffee house and am wondering which video effect to use in Final Cut Expres
-
How do I turn off album cover art on my lockscreen??
I can't stand that when I am playing my music on a train or bus that when I go to unlock my phone the album cover art shows up all over my phone screen like so. It's annoying. What if I am listening to Backstreet Boys and I happen to go for the unlo
-
Hi! I have a ldif file, which contains binary data (jpeg-photo) and I want to import this data (output of an X.500) into a connector view. I implemented a conversion routine, which converts all base64 values to utf-8, but for binary data, it doesn't