I am living in Cambodia, i use iphone 4s. Siri got most of my friends' names incorrectly... and even can't guide me in my country.... it's really disappointing me that it is not working well

i wanna to teach siri how to spell name correctly...

http://www.apple.com/iphone/features/siri-faq.html
Siri is currently in beta and we’ll continue to improve it over time.
Language Support and Availability
Siri works exclusively on iPhone 4S. Siri understands and can speak the following languages:
English (United States, United Kingdom, Australia)
French (France)
German (Germany)
Japanese (Japan)
In 2012, Siri will support additional languages, including Chinese, Korean, Italian, and Spanish.
Can I use Siri in any of these languages in other countries?
Yes. Siri can be enabled in any country, and you can choose to speak to it in English, French, or German. However, Siri is designed to recognize the specific accents and dialects of the supported countries listed above. Since every language has its own accents and dialects, the accuracy rate will be higher for native speakers.

Similar Messages

After several years of use very satisfied with Firefox, recently loaded version (4.0.1) severely slows my browsing, and even my system, especially when there are pictures or videos. I said that this was not the case before and my system is Windows XP SP3.

After several years of use very satisfied with Firefox, recently loaded version (4.0.1) severely slows my browsing, and even my system, especially when there are pictures or videos. I said that this was not the case before and my system is Windows XP SP3.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

How do I know if this update is appropriate for Windows Vista? I have done updates before, only to discover that they did not work well with Vista.

I keep getting a message that I need to update to firefox version 7. I can't find any information to help me know if this version is compatible with Vista. I did an "automatic" update in the past, and needed to uninstall it because it did not work well with Vista. firefox is not giving me any info regarding this - it just says install it.

http://en.wikipedia.org/wiki/History_of_Mozilla_Firefox
http://en.wikipedia.org/wiki/Firefox
thank you

After upgrading to IOS 8 my iPhone 5 wifi is not working well at all .. and can't connect to any of apple services like apple store even can't upgrade my application

After I upgraded to IOS 8 my iPhone is not working well at all .. the most serious issue is the wifi which is too slow and can't connect to apple store and can't update my application .. also tried to search or update for ios 8 but also can't connect . safari also always can't connect to any the server . please check and advise

Hey ahmedfromtanta,
Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Wi-Fi networks and connections
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Hi... i have iphone 5. my phone shows me the apple broken and does not work well . what this means? deppy

hi... i have iphone 5. my phone shows me the apple broken and does not work well . what this means? deppy

despoina kiato wrote:
καμία φορά σταματάει να δουλεύει. σβήνει το κινητό και μου δηχνει το μήλο σπασμένο. απενεργοποιήτε μόνο του . αυτό είναι όλο .
Englidh would help.

I have a Ipad4 and now it shows a big screem and I can't use it any more. I did a lot of things like full restore and the Ipad keeps not work well. What can I do? Is it a hardware problem?

I have an Ipad4 and now it shows a big sceem and I can't use it any more. I did a lot of things like full restore and the Ipad keeps not work well. What can I do? Is it a hardware problem?
Look the 2 images on link below:
https://www.dropbox.com/sh/0arufrxzjwwmweu/6Fxz1Ljbmd

Try Settings > General > Accessibility > Zoom: OFF
Note: You may need to use 3 fingers to tap and scroll.

Control center not working well on whatsapp

HI, with the new version of Whatsapp 2.11.11 the control center its not working well, anyone with this issue?

Hello torontonightowl,
Thanks for using Apple Support Communities.
For some initial troubleshooting on this issue where you're unable to open the control center on your iPhone, please first restart your iPhone, and if the issue persists then reset the iPhone.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Cheers,
Alex H.

My Ipone 3gs do not work well with iOS 6, can I go back to an earlier version?

Hi
I have always (maybe stupid!) updated my iOS version when itunes has proposed it, thinking my old iPhone 3 should work better. It is now clear for me that it is not the case!
Can I go back to an earlier version so I can use the phone as it was meant to work?
Have read something about if you have not save the "protocol" from an earlier version it is impossible!
The question is also justified for all my other iPhones and Pad in my family, should I stop updates iOS versions on them as oblivious thy are becoming useless with the time, or?
Best reg. Bilo

Hi, excellent with all quick answers!
It was not really meant to be rude to wjosten, but his answer was really short, short and did not help me with my problem.
I'm surprised to hear that your 3gs is working well!
My main reason to continue with my 3 gs (I have a iphone 5 also) is to use the GPS function in it. but from the moment I upgrade it to iOS 6.0.1 the GPS is not working well. I can not say if it is becase it is too slove or something is not supporting it. It does not matter if I use it in combination with Google Maps our my TomTom app.
It is loosing the GPS all the time.
The second problem is also that the 3gs is not working anymore in the TomTom car mounth holder.
TomTom are making them so they are only working for iphone 3 (so my other 2 iphone 4 have never worked in it, but it is in that way).
I do not know if it is the TomTom software which is not supported by iOS6 or what...
As I can only use the holder for my 3gs it is awast if the mobil is not working...
Reb. Bilo

Dear sir I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract. Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card. And invalid sim appeared.so I bought it without contract but it

Dear sir
I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract.
Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card.
And invalid sim appeared.so I bought it without contract but it seems to be lock in my country
Please tell me whats the matter?
My phone serial no 86034HTCA4T
Modem firmware 04.12.09
Thanks

Without contract is not the same as unlocked. The update to iOS 7 relocked
the iPhone to the wireless carrier to which it was originally locked. You must
contact that wireless carrier to see if they offer unlocking and if you qualify.
If you used jailbreak or other hack to unlock the iPhone initially, the method
used may prevent a legitimate unlock from succeeding and may render your
iPhone unuseable.

Why ps3 is not working well with airport

why ps3 does not work well wth the airport?

If you are referring to online gaming, then PS3 like all non-apple devices uses upnp to open ports.
Apple uses NAT-PMP to open ports.. East and West.. never the twain shall meet.
If it is internal wireless issues.. that is different.. airport should be just like any other wireless router.
If you tell us the issue we have more hope to help.

I lost my Iphone and I stored my photos on icloud, how to get those data back? My PC also not working.

I lost my Iphone and I stored my photos on icloud, how to get those data back? My PC also not working.

Welcome to the Apple Community Rahul.
Photos in photo stream...
You can log into your iCloud account on another computer or device and enable photo stream to see your photos. You should do this as soon as possible because photo stream in the cloud only keeps photos for 30 days and each day you delay, you will lose another days photos.
Photos in the camera roll...
If you kept a back up of your device you can use it to restore to a replacement device, this will restore all of the photos in your camera roll and isn't time limited.

New FocusTraversalPolicy Mechanism Does Not Work Well With OO Designs

I would like to complain about the new focus traversal mechanism not working well with object-oriented GUI designs.
Specifically, we have many reusable panel classes that can be swapped in and out of reusable dialog classes. On some of these panels, the default focus traversal is not what is desirable, perhaps because one component on the right side of the window is just slightly higher than a component on the left side, maybe due to the component on the right having a label on top, and so the default focus goes to the component on the right instead of the left. So we have a need to be able to explicitly define the order of components in some panels.
If I try to define a focus traversal policy in the panel's constructor, a NullPointerException is thrown because the panel's focus cycle root is null (the panel has not been added to any dialog or frame yet).
If I try to associate a focus traversal policy at the dialog level, it would have to explicitly reference its child panels' inner components, which would break the encapsulation of the panels. It would also make it hard to have generic dialog classes into which various reusable panel objects can be swapped.
Someone suggested making each panel a focus cycle root. This makes it hard to "break out" of one panel to move on to the next panel in the dialog. Special keys would have to be assigned to try to cycle out, and these keys would have to be different than the normal traversal keys, making them inconsistent and nonintuitive to the user. Also, the focus policy would have to know if the dialog had more than one panel, what order the panels were in to know whether to cycle to the next panel or not, etc. This is a mess.
Does anyone have any idea how to get around these problems? I have tried using a global focus policy with a global hash map of prev/next component key-value pairs, but we are still running into trouble with some deeply nested tabbed dialogs. It's just not possible to always have the focus cycle root in existence at the point where you want to explicitly define traversal between two components, or when you are trying to establish the default component for a panel in a tabbed pane.
Has anyone else run into similar issues?
Robbie Gilbert
[email protected]

I agree completely. One of the popular consultants on this forum stated that the new focus mechanism was more versatile and only a little more complex. I would say it's more than a little complex given the trouble average programmers are having understanding how it works...at least at first...and after understanding it realizing that they are going to have type their fingers off to update their code. Oh, and the dread of maintaining this awful mess.
I'm currently having the same problem as you Robbie. Some of my reusable panels need special tab ordering...that's not usually a problem, in most programming environments, till now. Now I have to go around the world and back just to get my stupid cursor to be in the right place when I hit the tab key??!!! and special key mappings just to get out of a focus cycle...lame.
And how is an IDE graphical designer going to work with this? It's not, that's how...ok maybe if some kind person or company creates a custom focus traversal policy editor of some kind, I don't know.
Good grief Sun! We need something to help us meet our deadlines, not solutions that force us to spend 80% of our time customizing every stinking bit of UI functionality we need!!!
JTables are even worse. I've mastered most of the garbage that is JTable after many months of pain and I don't know how I'm going to help my peers understand them in any short amount of time. Most of them were Oracle Forms programmers, not that that is any great solution either. But they will likely have problems.
In conclusion, I wish I had chosen another UI technology for our new product client, and may yet.

Fan is not working well of a pavilion g6

when starting up my laptop, it reports that my fan is not working well and when it remains on for about 10minutes it starts to be hot at the position where the fan is located. the problem just started.

Hello
could you sense the fan is running by hearing and hot air blow out from air vent?
1) if fan is running and running faster when hot, it means fan is working. please check if anything block the air vent or air intake. only Air can flow freely, it can cooling down the CPU.
2) If Fan is running and air vent is not block and unit is been used long time, maybe the dust. if you have skill, please clean dust, it need remove some cover to disclose fan/heatsink.
3) update BIOS to latest. of course Fan need to replaced if it is not run, but the running Fan usually don't need to be replaced.
I work for HP.
If you like my reply, please click "Kudos"

Facebook is not working well on Firefox for two days now?

For two days now, Facebook is not working well on Firefox...all other web sites are fine, Facebook is not loading like it was, prior to yesterday, there were no problems. Facebook is working fine on Internet Explorer, but not on Firefox. What's up?

Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences''' in the address bar and press enter.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences''' in the address bar and press enter
Select '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

My Safari browser is not working well. Junk pages keep poping in and key pages for me appear intoxicated by alien pop ups preventing me navigate that page. Updated last Safari version and problem prevailed. Tried downloading Safari for Mac OS X Mavericks.

My Safari browser is not working well. Junk pages keep popping up and key pages, for me, appear intoxicated by alien pop ups preventing me navigate that page.
I updated to latest Safari version (7.0.4) but the problem persists.
I tried downloading a new version of Safari for Mac OS X Mavericks but couldn't find it available.
Thanks for your help.

The pop ups are malware. It's not necessary to reinstall Safari.
Help here ..
The Safe Mac » Adware Removal Guide
The Safe Mac » Genieo
The Safe Mac » Mac Malware Guide
Just so you are aware, on a Mac running Mavericks, the only way to reinstal Safari to to restore OS X using OS X Recovery

I am living in Cambodia, i use iphone 4s. Siri got most of my friends' names incorrectly... and even can't guide me in my country.... it's really disappointing me that it is not working well

Similar Messages

Maybe you are looking for