I am logging in - but the Adobe FormsCentral will not open.  It just shows an explanation mark in a circle.  How do I open my surveys and results?

I have several surveys/questionnaires in Adobe FormsCentral and when I log in -- it won't open.  It just gives me an explanation mark in a circle.  Help!  Mary

Hi maryfulton,
I checked your account, and there are no issues there. If you're still having trouble logging in, please clear the browser cache, and then try logging in directly to https://formscentral.acrobat.com. Any luck?
Best,
Sara

Similar Messages

  • I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

    I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

    Alternatively, install & use RawTherapee instead to develop your raw files instead (free and open source).
    http://rawtherapee.com/

  • I have windows 7 but acrobat adobe pro will not down load and work correctly

    I have window 7 but acrobat adobe pro will not install correctly and work correctly with my 2020 cabinet design program, it worked on my lap top but not on my desk top

    Hi Marketing Haskin,
    Are you facing downloading issues or installation issues?
    Are you getting any error message?
    Are you downloading the installer from Adobe official website or from any third party website?
    Regards,
    Rahul

  • HT3669 My Epson Perfection 1200 scanner functions as a flatbed scanner but when I try to scan transparencies the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimet

    Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
    I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
    Do I have to buy a new scanner?  It seems so close to working correctly. 
    I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
    Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
    Thanks

    I have same issue - have you solved this yet?

  • I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi.  I have searxhed evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason.

    I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi.  I have searched evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason. I can't upgrade for my icloud account.

    Try the following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • I have CC and while attempting Light Effects, the Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Ple

    I have CC and while attempting Light Effects, the Light Effects Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Please help!
    I tried to delete the layer attempt again. I am in a Photoshop class, but the work is all online, so all my teacher is going to do is send me to this site. I am trying to edit a photo for this class, and without this working, i go to filter>render>light effects. the bar and panel will pop up for about 2 seconds, then disappear. How do i get the options bar and properties panel to display?

    I was about to suggest resetting LE from the Workspace drop-down top right corner, but if you can't see the Options Bar, I guess that is not going to happen.  The normal Tool reset is grey out for LE, so it might be a case of resetting Preferences.
    Reset Preferences
    Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
    Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

  • I have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?

    i have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?

    The way I did it was I got the free app sync:stream from the App Store and then added my ipod to my ps3's Bluetooth devices. Then went to audio settings and set output and input to 'Skaggs iPod' you then open the app and it will be listed under music as a media service. You then go to all tracks and click copy (press triangle) it will then begin to copy all of your songs onto your ps3 via Bluetooth. I haven't tried but I assume the same can be done with photos. I hope this was helpful reply if you have any questions :) good luck

  • Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please :)

    Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please

    Need to know your Mac model. If it's a PowerPC, the max OS is Leopard 10.5.x. If it's an Intel procesor, you can upgrade to Snow Leopard (for $29) & later to Lion.
    *Mac OS X 10.5 Leopard installation system requirements*
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
     Cheers, Tom

  • My email client will open but the old emails will not.

    My email client will open on my mac mini but the old emails will not. I have some as far back as 2009.
    What can I do?

    Hmmm, sounds like they might not really be there!?
    Get Find Any File...
    http://apps.tempel.org/FindAnyFile/
    Hold Option or alt key when selecting Find to Find All.
    Search for Name> Ends in>.emlx
    (dot ee em el ex)
    When done, sort by date, see if there are any from 2009, & if so what size they are, and if dragging one to Text Edit icon shows text.

  • HT5624 my apple id account has been disabled for security reasons.  I have re-set my password numerous times but the system still will NOT let me sign in.  It continues to say your account has been disabled.

    my apple id account has been disabled for security reasons.  I have re-set my password numerous times but the system still will NOT let me sign in.  It continues to say your account has been disabled.

    CALL
    1-800-MY-APPLE (1-800-692-7753)   let them know and they will helo you enable the account.  even if you change the password 50 times the account will stay disable till you call them
    good luck

  • I cannot get my indesign to download, The adobe installer will not initialize

    I cannot get my indesign to download. the adobe installer will not initialize

    I've moved your question to the Downloading, Installing and Setting Up forum where, hopefully, someone can help you.

  • I installed an Extreme in place of an old Express, the various phones and Ipads seem to work on the WiFi but the Mac itself will not connect.  It says something about the IP address.

    I installed an Extreme in place of an old Express, the various phones and Ipads seem to work on the WiFi but the Mac itself will not connect.  It says something about the IP address being used by another device.  Second wifi network was also created.  The Mac worked for a few minutes and then gaev up citing eth IP problem......any clues people??

    If you have not already done so, now would be a good time to perform a complete network power cycle.......to give everything a fresh start.
    Power off every device on the network.....computers, printers, hard drives, etc......in any order that you want
    Wait a full minute
    Start the modem, and let it run by itself for 2-3 minutes
    Start the next device connected to the modem and let it run a full minute
    Keep starting devices one at a time about a minute apart until the entire network is back up
    Check the network

  • Mini ipad is disabled and I downloaded Itunes but the exe file will not run

    mini ipad is disabled. says connect to itunes. I downloaded itunes but the exe file will not run.What to do?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • I just bought my iphone5c on ebay, but the previous owner will not remove from their account, what do i do?

    I just bought my iphone5c on ebay, but the previous owner will not remove from their account, what do i do?

    You won’t be able to use it. Ask eBay for a refund.
    (120398)

  • I tried to remove the rotation lock, it is not off but the screen still will not rotate. Any suggestions?

    i tried to remove the rotation lock, it is not off but the screen still will not rotate. Any suggestions?

    it is not off but the screen still will not rotate
    Well, if it's not off, that means it's on.  So naturally it will still not roate.

Maybe you are looking for

  • Outlook 2007 "To Do" bar not showing iCloud Calendar events:

    It may be that Apple did not program into the iCloud software that piggybacks to Outlook 2007 the "To Do/Appointments" bar that shows all your iCloud calendar events on the right side of Outlook. It took hours with Apple to get all devices to sync wi

  • Can anybody tell me what is the problem in the code below?

    package first; class A { A a; A(){} A(A aa){ this.a=aa; String name; void setname(String a){ this.name=a; void bar(){ dostuff(a); void dostuff(A a1){ a.setname("vahvah"); //a1=new A(); public static void main(String args[]){ A a2=new A(); A a1=new A(

  • Unexpected loading and unloading of BusinessObjects DLL's slows down app.

    Hi all, I have a dev laptop, and a client tabletpc. In my application I preload a report to get a faster initial view of the report I'm using. I noticed very slow preloading on my clientmachine. This doesn't happen on my dev. machine. I did some obse

  • Does Muse support multiple renditions of the same site?

    I have built a desktop website, but would also like to build a mobile version of the same site. Can Muse support a desktop and mobile edition of the same website? So for example, if the user is viewing the site on an iPhone, they see a mobile-optimis

  • Related to approval   template

    hi   i am using the sap 2005b with 36 patch   i want to set the approval for particular condition and in that   approval there is one option  that is "terms based on user query" so i want save the query to that option. so what is procedure for that