I am looking for a Fan control utility for Toshiba laptops

Hello,
I am looking for a fan control utility for toshiba laptops (like i8kfangui for example).
anybody help...

Hi
Toshiba does not provide special too for the fan controlling.
Only the Toshiba Power saver is available on the driver page.
This utility controls the settings for CPU processing speed, cooling method, screen brightness, etc
Maybe its a option for you

Similar Messages

Fan Control Apps for MacPro 2.93 Mhz ....

Ok, I figured out how to disable Fan Control.
Now I only have smcFanControl installed. I can hear the fans running all the time now. Before I installed FanControl and smcFanControl I could rarely ever hear the fans, even during the hot summer.
I have the slider controls set to the minimum, but the fans still run constantly, and my room is in the 50s F.
I really don't think the fans should be running all the time. The only way I can find to stop this, is to delete smcFanControl.
Is there any other FanControl apps that will allow you to adjust the fan speeds so the fans will not run all the time?

the fans are suppose to and need to run.... all the time.
but normal default is 499/599 rpm
boosting the minimum default is useful
you can have and should have profiles for low-medium-high if you push and use your system heavily
sounds like you have
too many cooks - spoils the soup
corrupt preference file
are not using the SmcFanControl for intended purpose and as designed
most people do create multiple sets and have "my default' (for want of a name) @ 800-900 which improves air flow and thermal temps while still being quiet.
older FBDIMMs are HOT and helps keep them in the 60's *C or if you have a hot GPU and need more air flow
maybe you have dust or other issues or the Mac Pro is recycling its own hot exhaust
The thing to look at is WHAT is (hardware) Monitor showing for your TEMPS from the thermal sensors as to what is or is not normal
And reset the SMC / and delete the plist files used
Never use more than one background utilty for a job and keep all of such utilities to a MINIMUM for best fastest stable and for performance, they do add up, they do matter. "Less is more."

Looking for 2x2 drum control pads for Logic

Hi all, happy new year.
I'm looking for a tiny control pad instrument with only 4 pads - small enough that I can sit anywhere (eg plane seat - economy :)) and tap out rhythms.
Any suggestions out there?
Cheers,
Shaun

Here goes, a little more than 4 Pads!
http://www.akaipro.com/prodMPC500.php
http://www.bosscorp.co.jp/products/en/DR-770/
http://www.m-audio.com/products/en_us/TriggerFinger-main.html
Fr.BlayZay.

Is Fan Control Safe for your MacBook Pro?

Im just wondering if Fan Control is safe for your MacBook.
does anyone here have an experience using it?

smcFanControl works fine. It won't hurt anything. You can't slow the fans down below the factory default setting.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Looking for a print control applet for online coupons.

I need to create a print control applet for my coupon web site. It will require clients to submit to a squeeze form and then control the quantity of coupons printed to that IP address. The app will also need to manage the overall quantities printed of any one coupon. This exact system is being employed by smartsource.com currently. Can anyone help in the creation of such an animal?
Thanks in advance for your response.
Greg

gnat wrote:
...[do not respond|http://www.google.com/search?q=site%3Aforums.sun.com+you+have+zero+control+over+who+posts+what|funny demand]...
you have zero control over who posts what++++ to that. It amazes me when clueless newbies(1) make statements that imply they actually think that either:
a) This thread 'belongs' to them.
b) They have the right or power to prevent posts by anyone.
1) But then, other things said by the OP have suggested that they are a special breed of clueless. More "less" than the usual.

Fan Control Software for iMac G5

do you know any software that makes me able to control the fans of my imac. I want to change the speed of my fans.

You can control the fan speed to a certain extent by going to system prefs>energy saver>options>processor perfromance and selecting "reduced". This should slow your fan speed down, but I am not aware of any software program that will contriol your fans speed. It wouldn't be a good idea anyway to interfere with the settings the machine selects for itself, the iMac is very sensitive to heat and shouldn't have fan hacks.
Miriam

Re: "Silent Option" Fan Control Application for MSI Laptops

Thanks for this great app. Works flawlessly on my GE60 20E.
I would like to know that what happens if I reduce fan speed so much? will it works on just low Cpu performance or same Cpu but high temperature?
One more thing how to I get the Gaming Center...

Quote from: digitalluster on Today at 17:59:28
How do I connect all the hard drives to the chipset on the motherboard? And where can I disable the ASMedia Controller? Is that within the bios or something that has t...

Fan Control Program for Windows Vista

Does anyone know of a program with which I can control my Macbook Pro fan speed? Whenever I run Vista, my MBP runs HOT. From what I can hear the fans are running at a minimum of 4500 rpms. Any help would much appreciated. I am running Windows Vista Ultimate in Boot Camp.

You should probably post your question in the Boot Camp discussions:
http://discussions.apple.com/forum.jspa?forumID=1165

Looking for "Startup Disk" Control Panel for OS 7.1

Hi,
For some reason the "Startup Disk" control panel is missing from my PowerBook 170 and it's not booting up nice like it should. I still like and use the old Mac PowerBook 170 for word processing. In many ways I even prefer it. Easy on the eyes and it keeps me off the internet.
Does anyone know where I can find a copy the OS 7.1 > Control Panel > "Startup Disk"?
Thanks!

A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
[email protected]
SMTP error from remote mail server after RCPT TO:<[email protected]>:
host mail-in.roc2.bluetie.com [208.89.132.202]:
550 5.1.1 <[email protected]>: Recipient address rejected:
User unknown in virtual alias table

User-developed Fan Control for the S10(e)

Hello and welcome.
When you've searched the internet and found this thread, it's possible that you are an owner of a Lenovo Ideapad S10 or S10e which has a little problem with the behaviour and/or the noise of the fan. In this post you will get all the informations you need to handle this problem for yourself. It should also be the same on every S9/S9e.
Just a few comments before we begin:
This is not an official support or solution by Lenovo.
We are just normal users as you are, but we get rid of the fan and wanted to find a way to handle it. So if you want to try anything of the methods described here you have to know that you'll do all this only at your own risk. We are not responsible for any damages of your device. You should only use these methods if you know what you are doing.
Please note that this thread is only for discussing, improving, trouble shooting and perhaps extending the fan control utilities. Any general complaints about the fan problem itself should be placed in the original thread right here: http://forums.lenovo.com/lnv/board/message?board.id=IdeaPad_Netbook&thread.id=795. It already has 80+ pages (the link goes to the first page) and it is better to exclude all the fan control stuff because there it's very difficult to keep an overview.
Here you may post all of your questions, ideas/brainstorming, concerns, thanks and so on and you are really invited to participate and be an active member.
In this first part of this post I'm going to summarize all information about using a fan control utility. For any newbie it will be enough to read this post to get all necessary information. The second part does the same for developement of fan control utilities as we still have no known or working fan control utility for Linux, Mac OS X and other OSs I've forgotten - for now.
For getting started you need a S10 or S10e with an up-to-date BIOS. For the S10 it's the 90 67, for the S10e the 66.
The battery issue
Under very specific circumstances - that we haven't figured out yet - it might happen that your Lenovo S9/10(e) no longer detects the battery while using S10FanControl or S10Fan. It might occur after 2 minutes, it might occur after 2 months, it might never occur. It does not occur using Notebook Hardware Control.
It can be solved by removing the battery, waiting 10 seconds and put it back in. Then the battery is re-initialized and the detection works again.
S10FanControl - Windows
The first utility is S10FanControl created by user dresslerc. The current version is 1.0.0.1, available here: http://www.mediafire.com/file/yd5xmnrnijf/S10FanCtrl1.0.0.1.zip. After you've downloaded it you just have to extract it and start the .EXE in the "Release" folder. Here are the notes and the description dresslerc posted right here:
Everyone,
I've uploaded a version which everyone can use to test with. Remember this is still a TEST version although I think it works for the most part. It should work both on the S10/S10e.
Please install the .NET Framework 2.0 or later first.
Then click here to download the exe: http://www.mediafire.com/?jlg2enkjdxn
Once downloaded, extract the files and hit hte S10FanCtrl.Exe. Once this program launches you should be able to control the fan. Keep in mind that if you lower the fan speed then it'll take upto 30 seconds before the S10 registers the change, so be patient.
I've only tested this on the latest BIOS 59. I am sure it will work on the 57 as well but the individual speeds might not work properly on that version. Please try it out and report back.
The only issue that I heard so far is that occasionally the fan will kick in regardless if in Manual/Smart Mode. Also the temp it shows may not be accurate. If you find any other issues please let me know what they are so I can attempt to fix them.
Once we have all the kinks worked out then I will release the source.
Heres a quick Video: http://www.youtube.com/watch?v=_PKl70ZgmFg
REMEMBER: USE PROGRAM AT YOUR OWN RISK!!! I AM NOT RESPONSIBLE FOR ANY DAMAGES THIS PROGRAM MIGHT CAUSE.
Application Use:
BIOS Controlled - Fan is controlled by the BIOS
Smart Mode - Fan is controlled based on the conifguration in the options. You can set the threshold here at what temp you want the fan to kick in...
Manual - Fan is controlled manually by the slider.
If you want to have the program startup automatically, then place a shortcut of the app in the PROGRAM FILES -> STARTUP folder. Then you may want to go to the options and make the application minimize at startup.
Edit:
It seems there are some issues with the app and the S10e or previous BIOS versions. Will post a fix asap.
The source code for S10FanControl is available here: http://www.mediafire.com/?sharekey=7a3fb99d33817c08c2b435915e8821d7e04e75f6e8ebb871, written in Visual Basic .NET 2008.
S10Fan - Windows
The second utility is a tool written by user slash:
Hi guys,
Well it looks like Lenovo dropped this matter after all. Anyway, I have here another fan controller to add to the bunch. I have been using it for some time now without any problems. It is for both S10 and S10e.
What the program does is basically the same as others. The S10's fan speed is controlled according to the ACPI thermal zone temperature. By over writing the values which resides at offset 50h of the EC register at an appropriate timing, the ACPI thermal zone temperature is over ridden. The program is written in C and uses WinIo created by Sysinternals. The GUI version is available now.
It should be noted that the fan speed temperature thresholds differs with BIOS version. For 14CN67WW and 14CW90WW the fan changes speed at temperatures 60c, 65c, 70c, and 80c. Furthermore, the BIOS will automatically shutdown the S10 if the temperature reaches 90c.
The program has a fail safe mechanism that automatically disables itself if the actual ACPI thermal zone temperature goes above 85c. This allows the BIOS to regain control and the fan will work as intended by Lenovo. If the temperature drops below 85c the program will take over control again.
To run the program, you will need administrative privileges.
Known working BIOS versions: 14cn58ww, 14cn60ww, 14cn67ww, 14cn90ww
The program will work with any BIOS version as long as the BIOS uses the 50h EC register readouts to control the fan.
build 2009.05.24
Higher priorities for EC commands.
Usage: The program will run in the system tray. Double click or right click and use the menu to open the program. To determine the BIOS temperature thresholds, use the 'Setup' button. To run at boot time, place a short cut in the startup folder.
http://www.mediafire.com/file/njhz0icym2t/S10Fan.zip build 2009.05.23
Usage: S10Fan.exe
Added GUI.
build 2009.05.17
Usage: S10Fan.exe 60 65 70 80 70 75 80 85
S10Fan.exe test
The first 4 values are the BIOS temperature thresholds, the latter 4 are new thresholds that we want to over ride with. To determine the BIOS temperature thresholds, use the 'test' option.
build 2009.03.16
Usage: S10Fan.exe 70 75 80 85
-Slash
For updates and newer releases please check slash's post: http://forums.lenovo.com/lnv/board/message?board.id=IdeaPad_Netbook&view=by_date_ascending&message.i...
Notebook Hardware Control - Windows
The third utility is a profile for Notebook Hardware Control. I've adapted it from a profile for the Lenovo N500 which I've found here: http://nhc.yourcopy.de/overview/. With the manual for creating the profiles that can be found here: http://www.notebook-treff.de/board/database/hilfsprogramme-f%C3%BCr-nhc/92-how-to-create-an-acpi-fil... I was able to change the ACPI commands to work on the S10(e).
Installation and setup is divided in two steps. The program Notebook Hardware Control (NHC) is available at http://www.pbus-167.com/. Install the program, but do not start it for now. Then you need my NHCConfig utility, available here: http://forum.eeepcnews.de/download/file.php?id=1476. It detects your model number and BIOS-version via WMI and writes a proper S10(e) profile to the NHC acpi directory. The GUI is German if you have a German Windows and English if not. Additional languages can be added.
After you've extracted the ZIP-file you have to start the nhcc.exe (requires .NET Framework 2.0). At first a message appears that you use the program at your own risk. Then you can choose if you want to apply your own settings (experts) or if you just want the program to run with my defaults (newbies). In the settings window you can see your system details on the left, you can set up your thresholds in the middle and you can set the fan speed you want on the right. Then click on execute.
Now start NHC. Go to the "Settings" tab and click on "Show all NHC options and settings". Then a few more tabs appear. Go to the "ACPI" tab and check if the "ACPI Control System" is running (if everything works, the message "ACPI Control System running" will appear, otherwise it says "ACPI control system is not yet configured for this system"). Now click on "Show ACPI Control System details".
Here you can change the temperature values the fan control depends on (the settings from NHCC are the default values). On the bottom of the window you can see the "Current CPU temperature". That is the value you have to deal with. In general it has a value of around 60°C. In the middle you can see four user editable temperature values. You can leave the values as they are if everything works. The on/off values are responsible for the temperatures at which the fan starts running and stops again after cooling the device. The level values are responsible for the fan speed, for example you can set the off_level higher to let the fan run all the time at the lowest level, if the values do not fit for your device or whatever.
You can switch between NHC and BIOS control by disabling or enabling the "ACPI Control System" or by closing NHC.
Q:
A:
With every utility it is possible that it takes some time until you see an effect after you've started the program. Any failure of the programs should be no big problem because the only thing that should happen is that the BIOS controls the fan. Another issue that might occur due to the way the fan is controlled is that the fan may start running for a very short time and it looks like the fan control has lost control. The fan should stop immediately or at least after a few seconds.
Keep in mind that running the S10(e) with a fan control means that the S10(e) has to deal with higher temperatures. That could mean that the device will not last for 10 years but only 9 years (who uses a netbook so long...?). In every case you need a tool for monitoring your cpu temperature. We know that especially Core Temp 0.99.5 and Real Temp 3.00 do a very good job. That is important because the temperature values you need to set up the fan control are different from the values reported by the cpu sensor, they are between 15°C and 20°C higher. A normal temperature reported by the monitoring should be around 40°C, with the NHC default values the fan starts running at 52°C and stops at 38°C.
Q:
A:
Q:
A:
END using fan control
BEGINNING developing fan control
Controlling the S10(e)'s fan is a litte bit difficult because it looks like there is no way to control it directly. But it is possible to manipulate the temperature the BIOS fan control depends on. As long as the built-in fan control thinks that the cpu is cool enough the fan stays off. And that is exactly the point where we can attack.
The fan control depends on a field called RTMP in the memory of the embedded controller. It can be accessed via "_SB.PCI0.LPCB.EC0.ERAM", the offset of RTMP is 0x50 (hex) or 80 (dec). It is a direct I/O read/write. The complete NHC command for reading the value is: ACPI.FIELD.ReadByOffset("_SB.PCI0.LPCB.EC0.ERAM", ref value, 0x50, 8) with "value" as the variable which gets the value.
What program logic do you need? You need a timer or something else that conducts an always-refresh cycle. It sounds very easy: You read the value, manipulate it and write it back. And it is that easy, you just have to keep some things in mind.
This refresh has to be done very often. The procedure must be very thin and quick. Also the bus that is used to communicate with the EC is a problem, but since the S10e BIOS 66 it became a minor problem for me because it looks like the built-in fan control now depends on some kind of average value over the last few seconds and it doesn't really matter if one write-cycle is failing.
The read-event must be placed before the write-event. Otherwise you just read your manipulated value. The field is filled by the system regularly, so you just have to test if the read_value is different from the written_value, then you know that the field was filled with a "fresh" value. Like "if read_temperatue <> written_temperature then real_cpu_temperature = read_temperature else do nothing".
About the values you have to write back... you will have to test and play a bit. My experience is that you can select three fan levels, starting at 59°, 62° and 70° - at least with the NHC profile and my S10e it's like that. It's some trial 'n' error. My fan stays off at < 59°, but you should select a very low value for fan_off like 30°. In my opinion it switches off much faster the lower the written value is. But it's just a feeling, I haven't measured it.
Q:
A:
Q:
A:
Perhaps some users from countries with other languages than German and English can add tags for "fan", "control" and "noise".
Note from Moderator: Minor edits in title and disclaimer.
Message Edited by JaneL on 04-25-2009 02:32 PM

Great opening post Carsten!
The latest bios:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-71252 (BIOS 66)
The FSB can be reduced from 133MHz to 100MHz using SetFSB, this also reduces the heat:
http://www13.plala.or.jp/setfsb/
clockgen = SLG8SP513V
If you add a shortcut to the startup folder the program will start at startup. Under properties you can change the target to:
"C:\Program Files\SetFSB\setfsb.exe" -s100 -b1 -cg[SLG8SP513V] -w20
So it starts with a FSB of 100Mhz, in the background, with the right clock generator, after 20 seconds.
Message Edited by quazar on 04-25-2009 05:07 AM

GS70 2QE (970m)- Any Fan control software?

I am looking for a Fan control utility that will work for the GS70 2QE, This is a brand new laptop of the latest generation.
I would like to turn the fan speed up manually during heavy computing loads to avoid the bouncing of the CPU clock due to thermal scaling. (Cools down, clocks up, gets hot, clocks down).
Thanks

Wondering how it worked? Can share with us?
Quote from: zipper on 07-April-15, 16:46:44
I've just seen fan software for GT70 - no idea if it could work for a GS.

Temp/Fan Control

My blackbooks temp hits about a high temp of 190 degrees F. Of course this is when it has been running for a few hours. Is this bad or normal? I installed an SMC fan control utility and it allows for optimal fan usage. Would you reccomend it?

Hi,
I'll be getting my 1st Macbook in about a week, but I have had a few laptops in my time.
They all run hot when they are being used. I ended up buying myself a Laptop Cooling Stand. You sit your laptop on them and they have 1-3 fans running to cool your laptop. They work great.
A computer Tech, told me to always use a laptop fan as this extends the life of the laptop.
iBreeze make a cooling stand, its on a slant for your laptop. Plus as they are USB run, it has a passthrough USB port so you don't loose a port when using the fan, like other fans.
I hope this helps.
Lynn

Fan controll in windows 7

hello I am wondering if anyone has found a fan control program for windows 7 that is like smcfancontrol i already know about restarting with smc still running and two other programs that i forget the names of that dont work. it would be greatly appreciated if you could point me in the right direction thank you!

http://sourceforge.net/projects/macfan/
Has worked flawlessly for me on a 15" MBP unibody(i5/330m)

Remote control (media) for Pavilion G6S?

Can you recommend for a remote control (media) for Pavilion G6S?

Hi
> I didn't found any driver for the A500 anyway, even for Vista...
It looks like the A500 is very new on the market and I believe the drivers (Vista) will be released in the next time
You will have to wait a little bit
I think that the Vista driver would be compatible with the Win 7.
I have installed Win 7 on my notebook and most of the vista drivers are working.

Fan control on Tecra 8000

Hello,
I'm worried about the working of the cooling fan, it starts to blow at the start of the system for a moment and when recharging the battery after that it only starts to blow at 82 degrees celcius!!! I would be more confident if it starts to blow at 50 degrees, is there a way to manage this?
I installed the latest bios 9.30 trad en tried serveral operating systems, like win 98se, win 2000 en win xp, none of them made a difference for the working of the coolingfan. I also tried the power utilities given by Toshiba, they even made the cpu mad by working at 100% cpu power.
Thanks for support, Rick
Message was edited by: slumpie

I found the sollution after a few days searching on the internet, I found i program made by someone for the Toshiba machines running linux, but he made also a fan control program for Windows. It needs the TVALD software from Toshiba to get installed.
My machine is running at a max of 50 degrees celsius right now and i'm very confident, I even can put the laptop on my legs ;)
http://www.buzzard.me.uk/toshiba/windows.html for those who want to know more about it.

I am looking for a Fan control utility for Toshiba laptops

Similar Messages

Maybe you are looking for