I am looking for a fool-proof way to share files between Mac 10.6 and Win 7

I need to share files BOTH WAYS between Mac OS 10.6 (latest rev - 10.6.3 at the time of this post) and Windows 7 Premium. Both computers are on a private network and both are on the same workgroup.
I followed this tutorial:
http://macs.about.com/od/filesharing/ss/file-sharing-with-snow-leopard-win7.htm
and I got part of the way there. This tutorial shows me how to set up sharing using the "Sharing" pref pane. I set up a few folders for sharing to specific users (me) from the PC. I set permissions properly, and enabled SMB. Everything was by the book (I have shared between XP and older macs in the past, this is not totally new to me).
For some reason, my Win 7 box is only able to see my public folder. I can set that folder (using the sharing panel in OSX) to read and write, so I can move files to and from it in Win7, but none of the other folders I shared on my Mac are available in Win7.
I am accessing my shares in Win7 like this:
\\192.168.123.130\Desktop
that's my Mac's static IP and then the Desktop is one of my shared folders on the Mac.
When I type that, I get an error in Win7 that says that folder is not accessible, and that I may not have permission. I am not prompted for a username/password at any point in the process.
the only way I am able to access the Mac's public folder is because I type "\\192.168.123.130" in Windows 7 and I am presented with a list of shared printers on my Mac and then the public folder. My other Mac shares are not listed there.
What am I doing wrong?
Oh, one more thing. Is there a good tutorial anywhere for sharing Win7 folders to my Mac? All the ones I have found are not working.
God, I really hate Windows sometimes.
Thanks
-----------S

LAN Manager authentication level was already set to "Send LM & NTLM - use NTLMv2 session security if negotiated" according to a web tutorial. I changed it to the option you recommended above.
Still, only the public folder is visible.
By the way - this is a brand new install of Windows 7. Almost nothing has been altered from its stock just-installed state.
It is connected to my Mac via a cat-6 ethernet cable which is plugged into my Mac Pro's second ethernet port. I did this because the PC is a Maya workstation, and I do not want to slow it down by installing all of our corporation's IT-required software that slows our systems down. It is not connected to the open internet in any way - just file sharing to my Mac.
My Mac is 192.168.123.130, the Win7 box is 192.168.123.132. Both have a subnet of 255.255.255.0 and a gateway of 192.168.123.130. I am UNABLE to ping the PC from the Mac. I am ABLE to ping the Mac from the PC.
Message was edited by: Steve Dorsey

Similar Messages

  • Does anyone know if there is a way to share files between Mavericks and Mac OS 9.1 operating system?

    Does anyone know if there is a way to share files between Mavericks and Mac OS 9.1 operating system? When I try to connect from my iMac I get a window that says "The version of the server you are trying to connect to is not supported." Is there a work-around to this problem or is it just not possible? It would be largly appriciated for a solutin beings my business is a small town newspaper, and we have some important files on the older computer that need to be acessed daily.

    Actually to share files between OS 8-9 and OS X, all versions, is quite easy from what I read. Look here for some details.
    http://reviews.cnet.com/8301-13727_7-20003464-263.html
    And here.
    https://www.google.com/search?q=file+sharing+Mac+OS+9.x&oq=file+sharing+Mac+OS+9 .x&aqs=chrome..69i57.20706j0j1&sourceid=chrome&ie=UTF-8
    Or since both OS 9 and OS X can do SMB Windows sharing you could use that protocol to share files from one to the other.
    Doesn't really matter what OS you are using. Mac OS/OS X shar files with Windows computers of all types and versions of Windows so the same applies for the different versions of Mac OS/OS X.
    Each Operating System takes care of reading and writing files to there respective file formats of the hard drives so that does not have to be the same. They both just have to be able to do Ethernet with the same files sharing protocol.

  • Anyone knows if there's a way to share files between ipads wihtout using the itunes software?

    I've been trying with some apps to do this but there's always a prior step in which you have to drag the files to the app using ITUNES. Someone knows if there's a way to share files without using this program?

    Every file has to be associated with an app. So you can't avoid that. You could look into something like dropbox, where you access the info online, and I believe, download it via the dropbox app then 'send' it to the app that'll read/open it.

  • [vmware] Best way to share files between host and client

    Good afternoon!
    I have successfully installed VMware server on my machine and set up a virtual machine, powering Windows XP for study issues (emulation via wine does not do the trick for me). The virtual machine runs fast and stable but does not meet my requirements unless I have two issues faced:
    First:
    How to access a USB pendrive monunted by the host system properly within the client?
    Second:
    What is the best way to share file system space between host and client? Should I set up a Samba share which is accessible for both host and client or is it save to grant my VM access to my physical hard disc as a whole (using it as a partition)?
    Thanks for answers in advance, I have still quite a lot to learn, when it comes to VMs.
    Regards,
    ~cg

    Do not setup your VMware to be able to access your physical disk as a whole. This would have you mounting the filesystem twice, corrupting it in the process.
    You /can/ setup VMware with Sharing Folders that lets you share your filesystem (either / or just /home or something else) and that is what I would recommend.
    As for accessing the pen drive from both operating systems at once, I'd say use the same Sharing Folders method. I always share /mnt so that I can access my cdrom/USB/etc from the vmware OS.
    The sharing folders is basically the same as a samba share, but uses vmware's own method (HGFS). Samba is more secure (if you are worried about your VMware OS breaking from it's shell and attacking your real filesystem, which is unlikely). You need the vmware tools installed to make use of it.

  • Easiest Way to Share Files Between Users? -- Public, Shared, Drop Box.. .

    We have five family members (and so five user accounts) using our Mac. What is the easiest way to copy files between / share files with / ... files from one user to the other?
    Shared ... Public ... Drop Box ...
    I do this so infrequently that I forget -- or have never figure it out properly.
    Any advice would be great.
    Thanks!

    The Shared folder is fine, but anything a user puts there will be read-only to all other users. If other users want to be able to edit such a file they can make a copy of it and edit the copy. If you want all users to be able to edit one of your files without them having to make a copy of it first, you must change the file permissions to allow that.
    There are a few ways to have new files automatically set so that others can write to them. Storing such files on an external hard drive on which file/folder ownership is set to be ignored is one way. You can also use ACLs - see this page for an example.

  • Looking for a sound editing app I can sync between Mac and iPod Touch

    I have old interviews I conducted as part of an old job. I want to put them on to my new iPod Touch to listen to while traveling. Since I am only interested in specific topics and passages I need to bookmark where in these hours-long interviews these passages are.
    I can get these interviews from my Mac into my Touch easily with iTunes, but I cannot bookmark or make notations in iTunes. There is a plethora of apps that will playback and edit/bookmark sound files for the Touch, but all of the ones I have found will only do this for files recorded with that app and they will only upload or email to my Mac but not send files from Mac to the Touch.
    If anyone has any thoughts on an app I have missed or a work around I would be forever grateful.

    LAN Manager authentication level was already set to "Send LM & NTLM - use NTLMv2 session security if negotiated" according to a web tutorial. I changed it to the option you recommended above.
    Still, only the public folder is visible.
    By the way - this is a brand new install of Windows 7. Almost nothing has been altered from its stock just-installed state.
    It is connected to my Mac via a cat-6 ethernet cable which is plugged into my Mac Pro's second ethernet port. I did this because the PC is a Maya workstation, and I do not want to slow it down by installing all of our corporation's IT-required software that slows our systems down. It is not connected to the open internet in any way - just file sharing to my Mac.
    My Mac is 192.168.123.130, the Win7 box is 192.168.123.132. Both have a subnet of 255.255.255.0 and a gateway of 192.168.123.130. I am UNABLE to ping the PC from the Mac. I am ABLE to ping the Mac from the PC.
    Message was edited by: Steve Dorsey

  • Best way to share files between users?

    New to the Mac World and trying to set things up for all our users. We have 5 (2adults,3kids) and I'm keen to be able to share some files with other members of my family and would like to know the easiest way in doing this.
    A couple of things to note;
    - The two adults are the admin's
    - Would like to share some photos between users (family photos are usually organised by my wife so I don't get to see them)
    - I'd like to let my kids view some of my videos that I've downloaded but not all of them
    Appreciate your time guys!
    Cheers

    Please try this first.  If you want to share certain files between users like pictures or music or even documents, apple has provided an easy way to do so.  The first step is to decide what to share.  For this example I will do pictures.  Open up Finder and go to the Macintosh HD, then click on "Users".  Here you will see a list of the users. Your account will look like a house instead of a folder because it is the account in use.  Click on your account and then right click (secondary click) on the pictures folder. 
    NOTE: From this point on you can do the same thing to any folder, such as music, documents, etc. or any file, such as a specific document in your documents folder.  But I will keep explaining pictures.
    After right clicking on the pictures folder, a new window will open up.  Near the bottom you will see "Sharing & Permissions:"  This is where you decide which users can access your folders/files and whether they can just read them or read and write them.  For example, if you want your wife and kids to have access to your iphoto library, just press the "+" button and add each one of them.  Under "Privilege" you had better give your wife the ability to "Read & Write" or you may get in trouble .  By doing this, any pictures she adds, deletes, or edits will be added, deleted, or edited in your iphoto too (and vice versa).  Lets say you don't want your kids to have editing abilities, then you just give them the "Read Only" privilege.  They can look at all the pictures, but they cannot change, add, or delete them.
    When your wife opens iPhoto for the first time, it will ask which library she wants to use.  (If not, you can do it through the menu bar).  Make sure you choose the iPhoto library under YOUR user account, not your wife's (it's empty).  It will no longer have a little red minus sign next to it.  That is the last time it will ask.  Every time your wife opens her iPhoto, it will use that library.  Same for the kiddos. 
    Again, you can do this with any folder or file.  This is how Apple intended users to share content without duplicating files or using external hard drives.  This way each user has their own icloud account but can access the families shared content.
    Hope this helps!  Good luck!

  • Safetest way to share files between PC and Windows?

    Hi everyone,
    My mac does not install any antivirus just sung apple build in anti virus, but i need to share file with my friend who using PC(using pen drive to share) and i have a netbook too n wanted to move file from there to here manually, so i wanna ask what is the best method to share so i will not get in touch with any virus, you know that how dangerous it is the virus in this years!!!!!

    Also, how your method when dealing with this kind of problem?
    It's not a problem. As I wrote, Windows viruses are inert on Macs. Just copy the file(s). "Secure empty trash" is not related to your concern, neither is disk encryption.
    There will always be threats to your information security associated with using any Internet - connected communications tool:
    You can mitigate those threats by following commonsense practices
    Delegating that responsibility to software is an ineffective defense
    Assuming that any product will protect you from those threats is a hazardous attitude that is likely to result in neglecting point #1 above.
    OS X already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple.
    A much better question is "how should I protect my Mac":
    Never install any product that claims to "clean up", "speed up",  "optimize", "boost" or "accelerate" your Mac; to "wash" it, "tune" it, or to make it "shiny". Those claims are absurd.Such products are very aggressively marketed. They are all scams.
    Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources.
    Illegally obtained software is almost certain to contain malware.
    "Questionable sources" include but are not limited to spontaneously appearing web pages or popups, download hosting sites such as C net dot com, Softonic dot com, Soft pedia dot com, Download dot com, Mac Update dot com, or any other site whose revenue is primarily derived from junk product advertisements
    If you need to install software that isn't available from the Mac App Store, obtain it only from legitimate sources authorized by the software's developer.
    Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
    Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
    Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
    Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
    Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iCloud, iTunes, or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
    Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
    Don’t install Java unless you are certain that you need it:
    Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
    Java can be disabled in System Preferences.
    Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
    Beware spontaneous popups: Safari menu > Preferences > Security > check "Block popup windows".
    Popup windows are useful and required for some websites, but unsolicited popups are commonly used to deceive people into installing unwanted software they would never intentionally install.
    Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
    If you ever receive a popup window indicating that your Mac is infected with some ick or that you won some prize, it is 100% fraudulent. Ignore it. The more insistent it is that you upgrade or install something, the more likely it is to be a scam. Close the window or tab and forget it.
    Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
    The most serious threat to your data security is phishing. Most of these attempts are pathetic and are easily recognized, but that hasn't stopped prominent public figures from recently succumbing to this age-old scam.
    OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
    Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
    If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
    Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
    Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
    Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

  • What is the best way to share calendars between Macs?

    I have two macintosh computers in my house and I use one as the master for our family calendar in ical. I want both calendars in sync, with the second mac as the "copy"-no new data is added here.
    My current method of "sharing" was to publish the files up to our web-server (not apple's) and then subscribe from computer #2 pointing to that web-server.
    Calendar-Publish-choose private server-and fill in the blanks-click-OK.
    When my mac updated to 10.5.4, this method broke. I can no longer publish the files using ical, but I now have to FTP the files up to the web-server. This is a couple of extra steps that is becoming a headache.
    File-Export (about 8 calendar files); open a terminal window; FTP the files up. Go to the other mac and Calendar-refresh all.
    Is there a better way to share ical files between two macs in the same house without FTP-ing? Or is Apple going to fix this problem?

    I set up ical synching through a google calendar and it works well. The benefit here is that you can see your calendar from a web browser when away from the house.
    Info in this thread: http://discussions.apple.com/thread.jspa?messageID=7772872&#7772872
    iCal should have a "share" option like itunes libraries for lans though. Odd that it doesn't.

  • Best way to share files between computers?

    Hi,
    I have a MBP & a G5 and I am doing video editing with FCP & web-designing with
    Dreamweaver on both of the computers. The problem is that I have been using
    the two computers completely separate.
    For example, if I create a project on my laptop, I can't go to my desktop and continue it
    unless I copy the files to a zip drive (or something similar) and manually transfer the files.
    And then I don't know which files are actually up to date.
    Is there any simple way that I can have the two computers produce, access & share files easier?
    I do have a .mac account but I don't know much about it's capabilities?
    I could really use some help and advise here.
    Thanx,
    Todd

    Hi,
    I had the exact same question/ problem a couple of days ago. I think in your case, working with large video files, .mac might not be an option.
    I would say you either work of an external drive (maybe connected as a shared drive wirelessly) as it was suggested to me, or you use a file sync utility like ChronoSync to keep both machines mirrored.
    Hope this helps.

  • Best way to regularly share files between mac and pc?

    Hi
    I'm starting uni this year and want to get all preppred and ready to go. Just wondering the best way I can go about sharing files between my iMac and the universities library computers (which I assume will be PC)?
    I currently use Word for Mac 2008 but am considering upgrading to Word 2011 or Pages before I start classes and for file sharing I hear Evernote or iCloud are the best options but if all else fails, I'll probably just go with a simple USB.
    Currently Own:
    - iMac
    - iPhone 5
    - Word for Mac 2008
    Considering
    - Word for Mac 2011
    - Pages
    - Evernote
    - iCloud
    - USB
    Let me know if you have any advice,
    Thanks

    Not too sure what you mean, sorry... but I will try and explain a little further.
    I'll be creating documents at school on a library PC computer, then wanting to access them at home on my iMac and vice versa.
    I had the idea that I would be able to save them to a web-based file sharing site but I've since learnt Evernote has to be downloaded to both the public PC and personal iMac and that probably isn't possible.

  • Fastest way to share files between computers

    Hi,
    I would like to share some files from my old PowerBook g4 with tiger, to my new MacBookPro. I use AirPort to connect to internet. I've put files in shared folder and connected both computers, but transfer is very slow (1 MB/s)

    File sharing over a wireless network is all well and fine - until you try to copy a lot of really large files. For cases like that you are better off having both computers cabled to an ethernet network.
    If you want a really fast method for use with an older Powerbook, use Firewire target disk mode.

  • Looking for the most easy way to position images on a page!?

    Hi, I'm looking for the most easy way for exact position a lot of PNG images on a web page. Input appreciated!
    Thanks!

    Basic 1-col layout with 3 evenly spaced boxes:
    http://alt-web.com/TEMPLATES/Basic-1-col-fixed.html
    CSS Floats and Margins tutorial -
    http://alt-web.com/DEMOS/3-CSS-boxes.shtml
    Float left & float right  images with wrapping  text
    http://alt-web.com/DEMOS/CSS2-Captions-on-floated-images.shtml
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.blogspot.com

  • I am looking for an application that would allow me to open a word doc, and take notes in the .doc using a stylus pen.  I'd then like to convert those notes to text, and then be able to copy / paste those notes into an email.  Does this app exist?

    I am looking for an application that would allow me to open a word doc, and take notes in the .doc using a stylus pen.  I'd then like to convert those notes to text, and then be able to copy / paste those notes into an email.  Does this app exist?  It seems like we were doing these same types of things with Palm Pilots years ago, one would think this would work with iPads?

    I don't believe it will open a Word document, but Writepad allows for handwritten conversion of notes to text and then to email. Might help you some of the way...

  • Can I force the bootcamp wizard to skip looking for the bootcamp drivers?  I have already downloaded the latest drivers and loaded them on a FAT usb drive.  All I want is for bootcamp to create the partition and allow me to install windows 8 pro

    Hi Everyone,
    Can I force the bootcamp wizard to skip looking for the bootcamp drivers?  I have already downloaded the latest drivers and loaded them on a FAT usb drive.  All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
    The bootcamp drivers have been downloaded from apple's website.  Filename:  BootCamp5.0.5033
    I have a iMac 27" late 2013 model.
    NOTE:  I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
    Appreciate any assistance.
    Regards,
    asdutoit

    There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
    Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

Maybe you are looking for

  • Help required in building OBIEE Report

    Hi, Can anyone help me to below OBIEE issues as I am very new to this field. 1. The requirement is to create one Oracle Apps Projects OBIEE report which was previously in discoverer. The discoverer report has 6 worksheet and many custom folders and m

  • Adobe Dreamweaver CS5 Classroom in a Book Chapter 10

    While converting my vertical menu library item to a Spry Vertical Menu, my <div.content> element dropped down on the page. Pages 244-45 offer a "fix" for this issue (deleting the second ul.MenuBarVertical rule) and I did this, but <div.content> still

  • JS CS3 : Hyperlinks.add(y,z) always recreates the same object :-(

    Hi, I am trying to create hyperlinks from an index. The command works fine except that doc.hyperlinks.add(source,destination) always rewrites the former one. They don't stack and I need them to do this way. Could you help ? I write this function : fu

  • New Toshiba HDTV with DVD

    I recently pruchaed a new Toshiba HDTV with built in DVD. When I hooked it up to my Verizon Cable connection my cable remote will not control ON/OFF or VOLUME. I have to turn the tv on with the Toshiba remote and also use it to control the volume. Ho

  • Tree Query Problem

    I've problem with tree query where if a level > 3 the result for top level is incorrect.  Here's the query with correct result where level of depth just 3 level : --select *from tblBOMStructed DECLARE @BOMStructure TABLE PartNumber varchar(14)not nul