I am looking for a hp scan jet 4600 drivers for lion

I have a HP scanjet 4600 and I will Like to set it up with lion
I am looking for a driver for a scanjet HP 4600

I also hit this problem. It is a real pain that HP fail adequately to support this unique scanner.
I have had to install Parallels to be able to use Windows within which this scanner does work.

Similar Messages

Looking for Lion compatible All-in-One printer

Looking for MacBook Pro Lion compatible All-in-One color printer for my Mom who is 77 and on a limited income when it comes to purchasing ink. Preferred options include wi-fi, auto duplex, memory card slots, easy to operate. I was leaning toward a Kodak printer but majority of reviews indicate when any one of the ink cartridges is empty no more print jobs will process until the empty cartridge is replaced. In addition, folks indicate even though ink is less expensive, replacemnet is more frequent indicating that perhaps the cartridge capacity is smaller in size. Both are deal breakers. Canon PIXMA MX892 Wireless and the HP Envy series both appear impressive but I am confused regarding compatibility with Lion. Appreciate experienced recommendations, Thanks

ChrisPbass,
I would suggest contacting HP Home & Home Office. They will be able to narrow down the field to what would be best for your particular use. There number is below.
1 (888) 999-4747.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Looking for Lion + InDesign users

Hi All,
I use InDesgin heavily for photographic album design, and since upgrading to Lion have hit an annoying problem.
When designing, I 'Place" (Command-D) images into the document, and do so by selecting my aperture library from the 'open' dialog (there is Aperture, Iphoto and Music in the lower area allowin direct access to your media).
Since upgrading to Lion it appears that I can only do this once per 'session', menaing if I place an image (or number of images), then go back with the Place command to add more, the "Open" buton is greyed out, but only for files in the media browser options (Aperture, iPhoto, Music) - I can 'Place' images form my desktop, or anywhere else in the sidebar of the 'Open' dialogue multiple times. To be able to place images from these Media areas more than once I am forced to quit InDeisgn and relaunch it - then I get one more shot at placing, before I need to quit again. The issue is common to both InDesign CS4 and inDesign CS5.
This is obviously a serious slowdown in my workfow, and I'm wondering if it's specific to my set up, or if it's happening to all Aperture/InDesign users.
Can aonyone else confirm this is the case - if not, I will know it's sepcific to my set up and eed to root around for the cause.
Thanks in advance for any helpers!
Ben

Same problem as above!
If you wanna test it, open InDesign and create a new document (just to start afresh).
1. Press Cmd+D to open the 'Place' window.
2. Click on 'Photos' from the 'Media' list on the left (the window that opens is what I call the media browser)
3. Select an image from your iPhoto / Aperture library and click 'Open'.
4. Place the image.
This works normally.
Now try to repeat steps 1-4. The second time you try, the 'Open' button is greyed out.
If you quit InDesign and reopen it, you can 'Place' one more image, but then you need to quit and reopen again to place more! It's a major slowdown for those of us who use InDesign everyday
Let us know how you get on.

Looking for All on one with USB Flash Drive Print/Scan support

I am looking for an All in One Print/scan/copy. It should support print from USB Flash drive and scan to the same.
Thanks

Hi,
You may check the HP Officejet 6600/6700 models which support USB Flash drivers.
You may find the flash driver specifications listed within the Memory Device specifications below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03058896&cc=us&dlc=en&lang=en&lc=en&product=505...
As well you may check the HP Officejet 8600 Series which supports both USB Flash Driver and Memory cards, its specifications can be located below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02858465&cc=us&dlc=en&lang=en&lc=en&product=432...
Both of the products above provide Print, Scan, Copy and Fax functionality.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I am looking for a (free, ideally) virus scan/check for my MacBook Pro -- any suggestions?

I am looking for a (free, ideally) virus scan/check for my MacBook Pro -- any suggestions?

Mac users often ask whether they should install "anti-virus" software. The answer usually given on ASC is "no." The answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to log in to it remotely. That threat is in a different category, and there's no easy way to defend against it.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has so far failed to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. These failures don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is a problem of human behavior, and a technological fix is not going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the scam artists. If you're smarter than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software.
☞ Rogue websites such as Softonic and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial "anti-virus" (AV) or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in everyemail attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It's as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

Looking For Scan and Read Back Applications on the App Store for blind individuals?

Hi There,
Are there anything applications on the app store which for example if you were to scan a document and the user wanted it to be read back to them in text form or what ever the e.g picture had text on them can it be done or is there any application looking for asap?!!

Apps don't go in Passbook, but passes do. You can get passes via both the Starbucks and Apple Store apps. If you sign up for an account in the Starbucks app, you can create a pass and add value to it (or enter an existing Starbucks gift card number). The Apple Store app allows you to send gift cards to people, which can then be added to Passbook.
Check out http://support.apple.com/kb/HT5483 for more info.

Looking for XMP schema relevant to scanned documents

I want to embed XMP metadata in a scanned document, I'm looking for any existing schema or standards or even existing practice by anybody.
Examples:
physical sheet number
side of page (front or back)
make & model of scanner
operator name
scan resolution (DPI)
paper size
pixel format
paper orientation
Doesn't have to be those exact things, anything relevant would be interesting.

Thanks for that link. Have to read it.
I tracked the current problem down to the fact, that Adobe Lightroom puts the usageTerms into an element, looking like
<xapRights:UsageTerms>
<rdf:Alt>
<rdf:li xml:lang="x-default">
...some text...</rdf:li>
</rdf:Alt>
</xapRights:UsageTerms>
while bibble Pro 5 puts it into an attribute like
<rdf:Description ... xmpRights:UsageTerms="..." ...>
Based on the descriptions about XMP I found so far it is impossible to tell which of both is correct (and where the element or attribute is allowed). Hope to find some answers in that document.

Scan\Look for a particular character in a file

I would like to look for a particular character(@) in a file. The character might be in a word. When if find the character I want to read the actual whole word that contains that character.
What's the best way of going abt this?
Thx,
Kapapra.

Read the file line by line using BufferedReader.
Tokenize each line on space.
Loop through the token strings.
For each token that contains the character that you are looking for (e.g. @) found using indexOf operator of the String class, print or save (or whatever you want to do with that token) that token.
Continue reading the file line by line till the end of the file.
Does this make sense? Look the java.io package API for the details on how to read the file and stuff.
If anyone has more effecient method to do this, please share.

Laser Jet M1212 "Looking for Printer"

Hello,
Using the Mac 10.9.2 operating system, I have started to get the following error message when I try to print: "looking for printer" - on my computer screen. Nothing prints.
In order to fix the problem, I must unplug and replug in my router (Cisco Linksys E2000) and turn the printer off and on.
This problem comes up at least once a day, recently.
Any ideas re how to avoid the problem altogether?
With thanks.

Hi AnnPiece,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand the printer keeps losing the network connection.
I will be happy to help you.
When the printer is installed on a network, (wired or wireless) the router assigns it an IP address.
However this IP address can change for various reasons.
I would setup a static IP address.
Printer Does Not Maintain Wireless Connection. Disregard the title.
Go to Solution five: Assign the printer a static IP address.
Hope this helps.
Thank you for posting on the HP Forums.
Have a great weekend!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Looking for hp officejet 6213 windows

Hi there i am looking for a HP Office jet 6213 windows scan,print, copy and fax all the futures work escape one scan.

Try using software update with your printer plugged in and on. I don't know why it doesn't come up, but the software is suppose to be there. You could when your in the print /fax preferences click open queue. Then on the next screen printer setup then drivers then scroll through till you fnd it.

Looking for a notetaking app that syncs with PC

I use playbook for mobility but PC for work. I am looking for a (simple) note taking app that will allow me to sync with PC - preferably via dropbox. I used to use cintanotes on PC but that doesn't sync to PB. Looked at Evernote but seems bloated and some adverse reviews. Some others exist by seem to have issues also - eg Simplenotes. Anyone out there found a good working solution?
Solved!
Go to Solution.

One named NotePad is free, saves as .txt files.
Another, WriterRoom, costs $1.99USD, and saves as .txt and .doc files.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

STATSPACK. What to look for ?

my users have been complaining that the application is very slow. What do i need to look for in this report.
STATSPACK report for
DB Name DB Id Instance Inst Num Release Cluster Host
XXXX 629101424 XXXX 1 9.2.0.6.0 NO scheduprod-s
ol
Snap Id Snap Time Sessions Curs/Sess Comment
Begin Snap: 4527 12-Mar-07 15:02:05 81 231.9
End Snap: 4531 12-Mar-07 15:42:01 81 234.1
Elapsed: 39.93 (mins)
Cache Sizes (end)
~~~~~~~~~~~~~~~~~
Buffer Cache: 304M Std Block Size: 8K
Shared Pool Size: 608M Log Buffer: 512K
Load Profile
~~~~~~~~~~~~ Per Second Per Transaction
Redo size: 3,891.02 2,878.32
Logical reads: 865.79 640.45
Block changes: 22.12 16.36
Physical reads: 13.86 10.25
Physical writes: 0.61 0.45
User calls: 231.43 171.20
Parses: 48.95 36.21
Hard parses: 8.44 6.25
Sorts: 4.25 3.14
Logons: 0.15 0.11
Executes: 51.42 38.04
Transactions: 1.35
% Blocks changed per Read: 2.55 Recursive Call %: 17.42
Rollback per transaction %: 2.53 Rows per Sort: 55.75
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 100.00 Redo NoWait %: 100.00
Buffer Hit %: 99.13 In-memory Sort %: 100.00
Library Hit %: 91.94 Soft Parse %: 82.75
Execute to Parse %: 4.81 Latch Hit %: 99.97
Parse CPU to Parse Elapsd %: 98.26 % Non-Parse CPU: 50.19
Shared Pool Statistics Begin End
Memory Usage %: 97.40 97.69
% SQL with executions>1: 18.64 31.84
% Memory for SQL w/exec>1: 17.60 31.65
Top 5 Timed Events
~~~~~~~~~~~~~~~~~~ % Total
Event Waits Time (s) Ela Time
CPU time 342 50.98
log file parallel write 7,798 138 20.59
log file sync 3,587 128 19.03
db file parallel write 193 29 4.39
control file parallel write 790 21 3.20
^LWait Events for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> s - second
-> cs - centisecond - 100th of a second
-> ms - millisecond - 1000th of a second
-> us - microsecond - 1000000th of a second
-> ordered by wait time desc, waits desc (idle events last)
Avg
Total Wait wait Waits
Event Waits Timeouts Time (s) (ms) /txn
log file parallel write 7,798 0 138 18 2.4
log file sync 3,587 0 128 36 1.1
db file parallel write 193 0 29 153 0.1
control file parallel write 790 0 21 27 0.2
SQL*Net more data to client 111,847 0 6 0 34.5
db file sequential read 432 0 2 5 0.1
db file scattered read 2,419 0 1 0 0.7
latch free 698 0 1 1 0.2
process startup 14 0 1 47 0.0
direct path read (lob) 14,912 0 1 0 4.6
SQL*Net break/reset to clien 920 0 0 0 0.3
control file sequential read 822 0 0 0 0.3
SQL*Net message from client 454,457 0 35,768 79 140.3
virtual circuit status 40,421 81 4,724 117 12.5
wakeup time manager 79 79 2,248 28461 0.0
jobq slave wait 264 252 765 2897 0.1
SQL*Net message to client 454,457 0 1 0 140.3
SQL*Net more data from clien 328 0 0 0 0.1
^LBackground Wait Events for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> ordered by wait time desc, waits desc (idle events last)
Avg
Total Wait wait Waits
Event Waits Timeouts Time (s) (ms) /txn
log file parallel write 7,798 0 138 18 2.4
db file parallel write 193 0 29 153 0.1
control file parallel write 790 0 21 27 0.2
process startup 2 0 0 35 0.0
control file sequential read 556 0 0 0 0.2
rdbms ipc reply 3 0 0 1 0.0
latch free 2 0 0 0 0.0
rdbms ipc message 6,444 2,366 13,269 2059 2.0
smon timer 8 8 2,344 ###### 0.0
pmon timer 834 834 2,339 2804 0.3
^LInstance Activity Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
Statistic Total per Second per Trans
CPU used by this session 34,169 14.3 10.6
CPU used when call started 33,176 13.9 10.2
CR blocks created 83 0.0 0.0
DBWR buffers scanned 0 0.0 0.0
DBWR checkpoint buffers written 1,459 0.6 0.5
DBWR checkpoints 0 0.0 0.0
DBWR free buffers found 0 0.0 0.0
DBWR lru scans 0 0.0 0.0
DBWR make free requests 0 0.0 0.0
DBWR revisited being-written buff 0 0.0 0.0
DBWR summed scan depth 0 0.0 0.0
DBWR transaction table writes 13 0.0 0.0
DBWR undo block writes 787 0.3 0.2
PX local messages recv'd 0 0.0 0.0
PX local messages sent 0 0.0 0.0
SQL*Net roundtrips to/from client 492,393 205.5 152.0
SQL*Net roundtrips to/from dblink 0 0.0 0.0
active txn count during cleanout 100 0.0 0.0
background checkpoints completed 0 0.0 0.0
background checkpoints started 0 0.0 0.0
background timeouts 2,898 1.2 0.9
branch node splits 0 0.0 0.0
buffer is not pinned count 1,617,141 674.9 499.3
buffer is pinned count 3,219,198 1,343.6 993.9
bytes received via SQL*Net from c 48,664,626 20,310.8 15,024.6
bytes received via SQL*Net from d 0 0.0 0.0
bytes sent via SQL*Net to client 380,182,385 158,673.8 117,376.5
bytes sent via SQL*Net to dblink 0 0.0 0.0
calls to get snapshot scn: kcmgss 370,472 154.6 114.4
calls to kcmgas 5,800 2.4 1.8
calls to kcmgcs 319 0.1 0.1
change write time 91 0.0 0.0
cleanout - number of ktugct calls 178 0.1 0.1
cleanouts and rollbacks - consist 0 0.0 0.0
cleanouts only - consistent read 15 0.0 0.0
cluster key scan block gets 88,031 36.7 27.2
cluster key scans 44,560 18.6 13.8
commit cleanout failures: block l 0 0.0 0.0
commit cleanout failures: buffer 0 0.0 0.0
commit cleanout failures: callbac 0 0.0 0.0
commit cleanout failures: cannot 0 0.0 0.0
commit cleanouts 16,509 6.9 5.1
commit cleanouts successfully com 16,509 6.9 5.1
commit txn count during cleanout 140 0.1 0.0
consistent changes 162 0.1 0.1
consistent gets 2,042,196 852.3 630.5
consistent gets - examination 578,365 241.4 178.6
cursor authentications 7,954 3.3 2.5
data blocks consistent reads - un 162 0.1 0.1
db block changes 52,993 22.1 16.4
db block gets 47,334 19.8 14.6
deferred (CURRENT) block cleanout 4,180 1.7 1.3
dirty buffers inspected 0 0.0 0.0
enqueue conversions 117 0.1 0.0
enqueue releases 32,269 13.5 10.0
enqueue requests 32,270 13.5 10.0
^LInstance Activity Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
Statistic Total per Second per Trans
enqueue timeouts 0 0.0 0.0
enqueue waits 0 0.0 0.0
execute count 123,202 51.4 38.0
free buffer inspected 0 0.0 0.0
free buffer requested 19,766 8.3 6.1
hot buffers moved to head of LRU 23 0.0 0.0
immediate (CR) block cleanout app 15 0.0 0.0
immediate (CURRENT) block cleanou 5,664 2.4 1.8
index fast full scans (full) 6 0.0 0.0
index fetch by key 214,924 89.7 66.4
index scans kdiixs1 554,891 231.6 171.3
leaf node 90-10 splits 9 0.0 0.0
leaf node splits 61 0.0 0.0
logons cumulative 362 0.2 0.1
messages received 3,953 1.7 1.2
messages sent 3,953 1.7 1.2
no buffer to keep pinned count 0 0.0 0.0
no work - consistent read gets 894,670 373.4 276.2
opened cursors cumulative 116,168 48.5 35.9
parse count (failures) 9 0.0 0.0
parse count (hard) 20,231 8.4 6.3
parse count (total) 117,273 49.0 36.2
parse time cpu 17,018 7.1 5.3
parse time elapsed 17,319 7.2 5.4
physical reads 33,199 13.9 10.3
physical reads direct 0 0.0 0.0
physical reads direct (lob) 15,100 6.3 4.7
physical writes 1,459 0.6 0.5
physical writes direct 0 0.0 0.0
physical writes direct (lob) 0 0.0 0.0
physical writes non checkpoint 496 0.2 0.2
pinned buffers inspected 0 0.0 0.0
prefetch clients - default 0 0.0 0.0
prefetched blocks 15,247 6.4 4.7
prefetched blocks aged out before 0 0.0 0.0
process last non-idle time 2,396 1.0 0.7
recursive calls 116,941 48.8 36.1
recursive cpu usage 1,523 0.6 0.5
redo blocks written 20,871 8.7 6.4
redo buffer allocation retries 0 0.0 0.0
redo entries 29,618 12.4 9.1
redo log space requests 0 0.0 0.0
redo log space wait time 0 0.0 0.0
redo ordering marks 0 0.0 0.0
redo size 9,322,888 3,891.0 2,878.3
redo synch time 13,084 5.5 4.0
redo synch writes 3,587 1.5 1.1
redo wastage 1,028,916 429.4 317.7
redo write time 14,064 5.9 4.3
redo writer latching time 0 0.0 0.0
redo writes 3,899 1.6 1.2
rollback changes - undo records a 422 0.2 0.1
rollbacks only - consistent read 162 0.1 0.1
rows fetched via callback 350,472 146.3 108.2
session connect time 0 0.0 0.0
session logical reads 2,074,430 865.8 640.5
^LInstance Activity Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
Statistic Total per Second per Trans
session pga memory 14,446,752 6,029.5 4,460.3
session pga memory max 24,898,104 10,391.5 7,687.0
session uga memory 17,184,593,312 7,172,200.9 5,305,524.3
session uga memory max 28,405,696 11,855.5 8,769.9
shared hash latch upgrades - no w 546,341 228.0 168.7
shared hash latch upgrades - wait 1 0.0 0.0
sorts (disk) 0 0.0 0.0
sorts (memory) 10,174 4.3 3.1
sorts (rows) 567,241 236.7 175.1
summed dirty queue length 0 0.0 0.0
switch current to new buffer 1,334 0.6 0.4
table fetch by rowid 1,958,222 817.3 604.6
table fetch continued row 1,912 0.8 0.6
table scan blocks gotten 143,317 59.8 44.3
table scan rows gotten 7,318,367 3,054.4 2,259.5
table scans (long tables) 15 0.0 0.0
table scans (short tables) 2,029 0.9 0.6
transaction rollbacks 421 0.2 0.1
user calls 554,503 231.4 171.2
user commits 3,157 1.3 1.0
user rollbacks 82 0.0 0.0
workarea executions - multipass 0 0.0 0.0
workarea executions - onepass 0 0.0 0.0
workarea executions - optimal 14,430 6.0 4.5
write clones created in backgroun 0 0.0 0.0
write clones created in foregroun 1 0.0 0.0
^LTablespace IO Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
->ordered by IOs (Reads + Writes) desc
Tablespace
Av Av Av Av Buffer Av Buf
Reads Reads/s Rd(ms) Blks/Rd Writes Writes/s Waits Wt(ms)
USERS
17,588 7 0.1 1.9 69 0 0 0.0
UNDOTBLSPCE
0 0 0.0 802 0 0 0.0
PERFSTAT
136 0 14.2 1.0 315 0 0 0.0
SCHEDWIN_INDX
20 0 10.5 1.0 164 0 0 0.0
INDX
14 0 11.4 1.0 96 0 0 0.0
SYSTEM
0 0 0.0 13 0 0 0.0
File IO Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
->ordered by Tablespace, File
Tablespace Filename
Av Av Av Av Buffer Av Buf
Reads Reads/s Rd(ms) Blks/Rd Writes Writes/s Waits Wt(ms)
INDX /opt/u01/oradata/XXXX/dbf/indx01.dbf
14 0 11.4 1.0 96 0 0
PERFSTAT /opt/u01/oradata/XXXX/dbf/perfstat01.dbf
136 0 14.2 1.0 315 0 0
SCHEDWIN_INDX /opt/u01/oradata/XXXX/dbf/schedwin_indx01.dbf
10 0 12.0 1.0 94 0 0
/opt/u02/oradata/XXXX/dbf/schedwin_indx02.dbf
10 0 9.0 1.0 70 0 0
SYSTEM /opt/u01/oradata/XXXX/dbf/system01.dbf
0 0 13 0 0
UNDOTBLSPCE /opt/u01/oradata/XXXX/dbf/undotblspce01.dbf
0 0 802 0 0
USERS /opt/u01/oradata/XXXX/dbf/users01.dbf
11,608 5 0.1 1.4 43 0 0
/opt/u02/oradata/XXXX/dbf/users02.dbf
2,369 1 0.5 3.4 14 0 0
/opt/u03/oradata/XXXX/dbf/users03.dbf
3,611 2 0.2 2.4 12 0 0
^LBuffer Pool Statistics for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> Standard block size Pools D: default, K: keep, R: recycle
-> Default Pools for other block sizes: 2k, 4k, 8k, 16k, 32k
Free Write Buffer
Number of Cache Buffer Physical Physical Buffer Complete Busy
P Buffers Hit % Gets Reads Writes Waits Waits Waits
D 37,715 99.1 2,073,831 18,097 1,459 0 0 0
Instance Recovery Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> B: Begin snapshot, E: End snapshot
Targt Estd Log File Log Ckpt Log Ckpt
MTTR MTTR Recovery Actual Target Size Timeout Interval
(s) (s) Estd IOs Redo Blks Redo Blks Redo Blks Redo Blks Redo Blks
B 160 34 1278 19692 19707 110592 19707
E 160 30 1056 17051 16555 110592 16555
Buffer Pool Advisory for DB: XXXX Instance: XXXX End Snap: 4531
-> Only rows with estimated physical reads >0 are displayed
-> ordered by Block Size, Buffers For Estimate (default block size first)
Size for Size Buffers for Est Physical Estimated
P Estimate (M) Factr Estimate Read Factor Physical Reads
D 32 .1 3,970 2.53 37,533,655
D 64 .2 7,940 2.07 30,675,635
D 96 .3 11,910 1.81 26,843,986
D 128 .4 15,880 1.67 24,744,049
D 160 .5 19,850 1.61 23,889,520
D 192 .6 23,820 1.57 23,290,550
D 224 .7 27,790 1.36 20,129,947
D 256 .8 31,760 1.16 17,216,468
D 288 .9 35,730 1.05 15,577,531
D 304 1.0 37,715 1.00 14,849,589
D 320 1.1 39,700 0.96 14,224,396
D 352 1.2 43,670 0.89 13,166,810
D 384 1.3 47,640 0.85 12,628,194
D 416 1.4 51,610 0.84 12,417,548
D 448 1.5 55,580 0.82 12,242,048
D 480 1.6 59,550 0.82 12,197,717
D 512 1.7 63,520 0.82 12,148,615
D 544 1.8 67,490 0.81 12,085,500
D 576 1.9 71,460 0.81 12,032,229
D 608 2.0 75,430 0.81 11,972,157
D 640 2.1 79,400 0.80 11,902,712
^LPGA Aggr Target Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> B: Begin snap E: End snap (rows dentified with B or E contain data
which is absolute i.e. not diffed over the interval)
-> PGA cache hit % - percentage of W/A (WorkArea) data processed only in-memory
-> Auto PGA Target - actual workarea memory target
-> W/A PGA Used - amount of memory used for all Workareas (manual + auto)
-> %PGA W/A Mem - percentage of PGA memory allocated to workareas
-> %Auto W/A Mem - percentage of workarea memory controlled by Auto Mem Mgmt
-> %Man W/A Mem - percentage of workarea memory under manual control
PGA Cache Hit % W/A MB Processed Extra W/A MB Read/Written
100.0 219 0
%PGA %Auto %Man
PGA Aggr Auto PGA PGA Mem W/A PGA W/A W/A W/A Global Mem
Target(M) Target(M) Alloc(M) Used(M) Mem Mem Mem Bound(K)
B 245 200 40.2 0.3 .7 11.8 88.2 12,544
E 245 200 40.8 0.3 .7 11.8 88.2 12,544
PGA Aggr Target Histogram for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> Optimal Executions are purely in-memory operations
Low High
Optimal Optimal Total Execs Optimal Execs 1-Pass Execs M-Pass Execs
8K 16K 14,257 14,257 0 0
16K 32K 124 124 0 0
32K 64K 62 62 0 0
64K 128K 14 14 0 0
128K 256K 8 8 0 0
256K 512K 5 5 0 0
512K 1024K 4 4 0 0
1M 2M 32 32 0 0
2M 4M 2 2 0 0
4M 8M 2 2 0 0
PGA Memory Advisory for DB: XXXX Instance: XXXX End Snap: 4531
-> When using Auto Memory Mgmt, minimally choose a pga_aggregate_target value
where Estd PGA Overalloc Count is 0
Estd Extra Estd PGA Estd PGA
PGA Target Size W/A MB W/A MB Read/ Cache Overalloc
Est (MB) Factr Processed Written to Disk Hit % Count
31 0.1 70,206.2 6,260.3 92.0 5
61 0.3 70,206.2 4,168.3 94.0 0
123 0.5 70,206.2 3,168.1 96.0 0
184 0.8 70,206.2 2,757.2 96.0 0
245 1.0 70,206.2 1,869.3 97.0 0
294 1.2 70,206.2 1,125.7 98.0 0
343 1.4 70,206.2 1,002.5 99.0 0
392 1.6 70,206.2 930.4 99.0 0
441 1.8 70,206.2 888.9 99.0 0
490 2.0 70,206.2 888.9 99.0 0
735 3.0 70,206.2 635.4 99.0 0
980 4.0 70,206.2 428.8 99.0 0
1,470 6.0 70,206.2 377.1 99.0 0
1,960 8.0 70,206.2 204.8 100.0 0
^LRollback Segment Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
->A high value for "Pct Waits" suggests more rollback segments may be required
->RBS stats may not be accurate between begin and end snaps when using Auto Undo
managment, as RBS may be dynamically created and dropped as needed
Trans Table Pct Undo Bytes
RBS No Gets Waits Written Wraps Shrinks Extends
0 13.0 0.00 0 0 0 0
1 856.0 0.00 224,282 0 0 0
2 965.0 0.00 473,740 1 0 0
3 1,304.0 0.00 565,018 1 0 1
4 859.0 0.00 258,906 1 0 0
11 886.0 0.00 345,162 0 0 0
12 1,332.0 0.00 546,236 1 0 0
13 841.0 0.00 229,950 1 0 0
14 797.0 0.00 215,582 0 0 0
15 1,252.0 0.00 349,772 2 1 1
16 850.0 0.00 222,894 1 0 0
^LRollback Segment Storage for DB: XXXX Instance: XXXX Snaps: 4527 -4531
->Optimal Size should be larger than Avg Active
RBS No Segment Size Avg Active Optimal Size Maximum Size
0 385,024 0 385,024
1 22,142,976 11,545,361 100,786,176
2 4,317,184 680,223 51,503,104
3 4,317,184 684,561 142,729,216
4 3,268,608 685,593 50,454,528
11 11,657,216 3,215,066 167,895,040
12 4,317,184 726,453 13,754,368
13 4,317,184 667,922 27,385,856
14 4,317,184 738,701 49,405,952
15 9,560,064 642,634 84,008,960
16 5,365,760 694,846 15,851,520
^LUndo Segment Summary for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> Undo segment block stats:
-> uS - unexpired Stolen, uR - unexpired Released, uU - unexpired reUsed
-> eS - expired Stolen, eR - expired Released, eU - expired reUsed
Undo Undo Num Max Qry Max Tx Snapshot Out of uS/uR/uU/
TS# Blocks Trans Len (s) Concurcy Too Old Space eS/eR/eU
13 754 8,780,184 149 1 0 0 0/0/0/0/0/0
Undo Segment Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> ordered by Time desc
Undo Num Max Qry Max Tx Snap Out of uS/uR/uU/
End Time Blocks Trans Len (s) Concy Too Old Space eS/eR/eU
12-Mar 15:38 166 ######## 68 1 0 0 0/0/0/0/0/0
12-Mar 15:28 204 ######## 3 1 0 0 0/0/0/0/0/0
12-Mar 15:18 214 ######## 3 1 0 0 0/0/0/0/0/0
12-Mar 15:08 170 ######## 149 1 0 0 0/0/0/0/0/0
^LLatch Activity for DB: XXXX Instance: XXXX Snaps: 4527 -4531
->"Get Requests", "Pct Get Miss" and "Avg Slps/Miss" are statistics for
willing-to-wait latch get requests
->"NoWait Requests", "Pct NoWait Miss" are for no-wait latch get requests
->"Pct Misses" for both should be very close to 0.0
Pct Avg Wait Pct
Get Get Slps Time NoWait NoWait
Latch Requests Miss /Miss (s) Requests Miss
Consistent RBA 3,899 0.0 0 0
FOB s.o list latch 113 0.0 0 0
SQL memory manager latch 4 0.0 0 790 0.0
SQL memory manager worka 66,516 0.0 0 0
active checkpoint queue 980 0.0 0 0
archive control 89 0.0 0 0
archive process latch 48 0.0 0 0
cache buffer handles 392 0.0 0 0
cache buffers chains 3,696,307 0.0 0.0 0 34,306 0.0
cache buffers lru chain 21,217 0.0 0.0 0 21,384 0.0
channel handle pool latc 106 0.0 0 0
channel operations paren 1,773 0.0 0 0
checkpoint queue latch 48,252 0.0 0 1,219 0.0
child cursor hash table 144,268 0.0 0.0 0 0
dml lock allocation 10,464 0.0 0 0
dummy allocation 724 0.0 0 0
enqueue hash chains 64,677 0.0 0.0 0 0
enqueues 77,340 0.0 0.2 0 0
event group latch 52 0.0 0 0
global tx hash mapping 21 0.0 0 0
hash table column usage 126 0.0 0 491,356 0.0
job workq parent latch 0 0 8 0.0
job_queue_processes para 43 0.0 0 0
kmcptab latch 79 0.0 0 0
kmcpvec latch 0 0 79 0.0
ktm global data 8 0.0 0 0
kwqit: protect wakeup ti 79 0.0 0 0
lgwr LWN SCN 4,217 0.0 0.0 0 0
library cache 1,798,405 0.3 0.0 0 47,204 0.9
library cache load lock 2,480 0.0 0 0
library cache pin 879,035 0.0 0.0 0 0
library cache pin alloca 603,279 0.0 0.0 0 0
list of block allocation 381 0.0 0 0
loader state object free 27,796 0.0 0 0
messages 18,381 0.0 0.0 0 0
mostly latch-free SCN 4,220 0.1 0.0 0 0
multiblock read objects 5,328 0.0 0 0
ncodef allocation latch 40 0.0 0 0
post/wait queue 5,523 0.0 0 3,587 0.0
process allocation 52 0.0 0 52 0.0
process group creation 106 0.0 0 0
redo allocation 37,748 0.0 0 0
redo copy 0 0 29,635 0.0
redo writing 14,340 0.0 0 0
row cache enqueue latch 11,874,838 0.0 0.0 0 0
row cache objects 11,876,412 0.0 0.0 0 81 0.0
sequence cache 1,113 0.0 0 0
session allocation 117,333 0.0 0.0 0 0
session idle bit 1,141,301 0.0 0.0 0 0
session switching 40 0.0 0 0
^LLatch Activity for DB: XXXX Instance: XXXX Snaps: 4527 -4531
->"Get Requests", "Pct Get Miss" and "Avg Slps/Miss" are statistics for
willing-to-wait latch get requests
->"NoWait Requests", "Pct NoWait Miss" are for no-wait latch get requests
->"Pct Misses" for both should be very close to 0.0
Pct Avg Wait Pct
Get Get Slps Time NoWait NoWait
Latch Requests Miss /Miss (s) Requests Miss
session timer 834 0.0 0 0
shared pool 1,804,311 0.2 0.1 1 0
sim partition latch 0 0 8 0.0
simulator hash latch 110,923 0.0 0 0
simulator lru latch 71 0.0 0 1,975 0.0
sort extent pool 48 0.0 0 0
spilled msgs queues list 79 0.0 0 0
transaction allocation 15,341 0.0 0 0
transaction branch alloc 61 0.0 0 0
undo global data 14,952 0.0 0 0
user lock 1,400 0.0 0 0
virtual circuit buffers 413,970 0.0 0.0 0 0
virtual circuit queues 187,775 0.0 0.0 0 0
virtual circuits 80,454 0.0 0 0
^LLatch Sleep breakdown for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> ordered by misses desc
Get Spin &
Latch Name Requests Misses Sleeps Sleeps 1->4
library cache 1,798,405 4,608 221 4390/215/3/0
/0
shared pool 1,804,311 3,662 477 3196/455/11/
0/0
enqueues 77,340 5 1 4/1/0/0/0
^LLatch Miss Sources for DB: XXXX Instance: XXXX Snaps: 4527 -4531
-> only latches with sleeps are shown
-> ordered by name, sleeps desc
NoWait Waiter
Latch Name Where Misses Sleeps Sleeps
enqueues ksqgel: create enqueue 0 1 1
library cache kgllkdl: child: cleanup 0 14 45
library cache kglupc: child 0 9 37
library cache kglic 0 7 4
library cache kglpin: child: heap proces 0 7 2
library cache kglhdgc: child: 0 5 10
library cache kglpndl: child: after proc 0 5 2
library cache kglobpn: child: 0 3 9
library cache kglpndl: child: before pro 0 3 9
library cache kgldti: 2child 0 2 0
library cache kglpnc: child 0 2 53
library cache kglhdgn: child: 0 1 30
shared pool kghalo 0 302 127
shared pool kghfrunp: alloc: wait 0 124 0
shared pool kghfrunp: clatch: nowait 0 89 0
shared pool kghfrunp: clatch: wait 0 74 10
shared pool kghupr1 0 47 339
shared pool kghalp 0 4 4
^LDictionary Cache Stats for DB: XXXX Instance: XXXX Snaps: 4527 -4531
->"Pct Misses" should be very low (< 2% in most cases)
->"Cache Usage" is the number of cache entries being used
->"Pct SGA" is the ratio of usage to allocated size for that cache
Get Pct Scan Pct Mod Final
Cache Requests Miss Reqs Miss Reqs Usage
dc_histogram_defs 2,118,905 0.0 0 0 2,547
dc_object_ids 3,216,369 0.0 0 0 701
dc_objects 22,189 0.2 0 0 456
dc_profiles 349 0.0 0 0 1
dc_rollback_segments 350 0.0 0 0 22
dc_segments 505,804 0.0 0 0 1,085
dc_sequences 18 0.0 0 18 2
dc_tablespaces 30,016 0.0 0 0 12
dc_user_grants 969 0.0 0 0 22
dc_usernames 21,334 0.0 0 0 7
dc_users 19,245 0.0 0 0 23
Library Cache Activity for DB: XXXX Instance: XXXX Snaps: 4527 -4531
->"Pct Misses" should be very low
Get Pct Pin Pct Invali-
Namespace Requests Miss Requests Miss Reloads dations
BODY 64 0.0 64 0.0 0 0
CLUSTER 340 0.6 348 1.1 0 0
INDEX 237 0.0 237 0.0 0 0
SQL AREA 116,941 6.6 391,824 10.0 11,529 2
TABLE/PROCEDURE 47,075 0.2 108,992 1.0 732 0
TRIGGER 746 1.5 746 1.5 0 0
^LShared Pool Advisory for DB: XXXX Instance: XXXX End Snap: 4531
-> Note there is often a 1:Many correlation between a single logical object
in the Library Cache, and the physical number of memory objects associated
with it. Therefore comparing the number of Lib Cache objects (e.g. in
v$librarycache), with the number of Lib Cache Memory Objects is invalid
Estd
Shared Pool SP Estd Estd Estd Lib LC Time
Size for Size Lib Cache Lib Cache Cache Time Saved Estd Lib Cache
Estim (M) Factr Size (M) Mem Obj Saved (s) Factr Mem Obj Hits
352 .6 375 15,062 574,744 1.0 97,562,016
416 .7 439 17,218 576,603 1.0 97,833,828
480 .8 503 19,153 578,104 1.0 98,135,338
544 .9 566 21,093 579,653 1.0 98,617,796
608 1.0 619 22,788 581,195 1.0 99,127,166
672 1.1 681 30,538 583,092 1.0 99,741,869
736 1.2 735 34,290 587,030 1.0 100,967,607
800 1.3 798 38,022 594,101 1.0 103,269,753
864 1.4 858 42,002 602,185 1.0 106,482,793
928 1.5 922 44,110 606,329 1.0 108,314,799
992 1.6 985 48,321 608,336 1.0 109,245,477
1,056 1.7 1,049 50,582 609,325 1.0 109,697,087
1,120 1.8 1,113 53,649 610,059 1.0 110,009,531
1,184 1.9 1,177 60,950 610,680 1.1 110,251,066
1,248 2.1 1,248 65,824 611,135 1.1 110,424,882
^LSGA Memory Summary for DB: XXXX Instance: XXXX Snaps: 4527 -4531
SGA regions Size in Bytes
Database Buffers 318,767,104
Fixed Size 732,784
Redo Buffers 811,008
Variable Size 771,751,936
sum 1,092,062,832
SGA breakdown difference for DB: XXXX Instance: XXXX Snaps: 4527 -4531
Pool Name Begin value End value % Diff
java free memory 33,554,432 33,554,432 0.00
large free memory 64,089,912 63,913,256 -0.28
large session heap 3,018,952 3,195,608 5.85
shared 1M buffer 2,098,176 2,098,176 0.00
shared Checkpoint queue 513,280 513,280 0.00
shared FileOpenBlock 1,191,104 1,191,104 0.00
shared KGK heap 7,000 7,000 0.00
shared KGLS heap 2,993,944 3,009,616 0.52
shared KQR L PO 1,312,072 1,322,312 0.78
shared KQR L SO 156,688 156,688 0.00
shared KQR M PO 2,065,256 2,065,256 0.00
shared KQR M SO 86,616 86,616 0.00
shared KQR S SO 8,216 8,216 0.00
shared KQR X PO 2,576 2,576 0.00
shared KSXR pending messages que 853,952 853,952 0.00
shared KSXR receive buffers 1,034,000 1,034,000 0.00
shared MTTR advisory 74,672 74,672 0.00
shared PL/SQL DIANA 616,680 616,880 0.03
shared PL/SQL MPCODE 764,312 611,264 -20.02
shared PLS non-lib hp 2,088 2,088 0.00
shared PX subheap 24,336 24,336 0.00
shared XDB Schema Cac 5,927,720 5,927,720 0.00
shared dictionary cache 3,229,952 3,229,952 0.00
shared errors 384 384 0.00
shared event statistics per sess 1,923,040 1,923,040 0.00
shared fixed allocation callback 472 472 0.00
shared free memory 17,476,144 15,506,552 -11.27
shared joxs heap init 4,240 4,240 0.00
shared library cache 68,887,280 65,624,984 -4.74
shared message pool freequeue 771,984 771,984 0.00
shared miscellaneous 49,162,528 49,205,880 0.09
shared parameters 55,784 35,760 -35.90
shared sim memory hea 328,304 328,304 0.00
shared sql area 509,408,184 514,745,136 1.05
shared subheap 100,040 100,040 0.00
shared table definiti 5,104 3,648 -28.53
shared trigger defini 544 544 0.00
shared trigger inform 1,800 1,800 0.00
shared trigger source 168 168 0.00
buffer_cache 318,767,104 318,767,104 0.00
fixed_sga 732,784 732,784 0.00
log_buffer 787,456 787,456 0.00
^Linit.ora Parameters for DB: XXXX Instance: XXXX Snaps: 4527 -4531
End value
Parameter Name Begin value (if different)
aq_tm_processes 1
background_dump_dest /opt/oracle/admin/XXXX/bdump
compatible 9.2.0.0.0
control_files /opt/u01/oradata/XXXX/ctl/cont
core_dump_dest /opt/oracle/admin/XXXX/cdump
db_block_size 8192
db_cache_size 318767104
db_domain
db_file_multiblock_read_count 8
db_name XXXX
dispatchers (PROTOCOL=TCP)
fast_start_mttr_target 160
hash_join_enabled TRUE
instance_name XXXX
java_pool_size 33554432
job_queue_processes 10
large_pool_size 67108864
log_archive_start TRUE
open_cursors 300
oracle_trace_enable TRUE
pga_aggregate_target 256901120
processes 150
query_rewrite_enabled FALSE
remote_login_passwordfile EXCLUSIVE
shared_pool_size 637534208
sort_area_size 524288
star_transformation_enabled FALSE
timed_statistics TRUE
trace_enabled FALSE
undo_management AUTO
undo_retention 10800
undo_tablespace UNDOTBLSPCE
user_dump_dest /opt/oracle/admin/XXXX/udump
End of Report
Message was edited by:
pinjam

Start from low hang fruite.
Total Wait wait Waits
Event Waits Timeouts Time (s) (ms) /txn
log file parallel write 7,798 0 138 18 2.4
db file parallel write 193 0 29 153 0.1
control file parallel write 790 0 21 27 0.2
process startup 2 0 0 35 0.0
control file sequential read 556 0 0 0 0.2
rdbms ipc reply 3 0 0 1 0.0
latch free 2 0 0 0 0.0
rdbms ipc message 6,444 2,366 13,269 2059 2.0
smon timer 8 8 2,344 ###### 0.0
pmon timer 834 834 2,339 2804 0.3
-------------------------------------------------------------Since you have numours logfile and control file related top wait events. Consider move them to a fast disk or seperate them from other datafiles if you haven't done so.
Also there's part of your statspack missing, like Top SQL

Looking for help - Company is going to Mobile Asset Management service that does not support BB - especially BB 10.

Hello,
I am looking for ideas/help. I currently have a BB Z10 (10.1.0.2039) with Verizon Wireless. The company has a BB Enterprise Server for older devices (I previously was on that). I bought a Z10 several months ago and have been connecting to the corporate network through Lotus Traveler. They do not have and will not implement a BB 10 Enterprise Server. Some in IT informed that if the company used the BB software they could manage all devices..... not accepted.
All my contacts, calendar, and company email is funneled to the BB Hub.....
So my company is implementing a Mobile Asset Management Service that I have to sign up for (Airwatch?). They only support Android and IPhone.
Will future versions of the BB OS support Android Apps.... Soon (I have less than 2 weeks)
I have read where it is possible to put the device in development mode to run Android Apps. I don't know if that will work with this and have no idea how stable the phone is in that mode. I travel internationally so I don't know how a development mode would work overseas. Any thoughts?
I like my Z10 but will need to switch to keep functionality if I can't find a work around
Any assistance ????
Thanks for any help.

Hi and Welcome to the Community!
BB10 devices have the ability to run .apk apps via special methods. Development Mode is used only for installing the app...not for normal operation. So you install (side-load) the app in Development Mode, then go back to normal mode for normal operations.
If a .bar file for the .apk app already exists somewhere, you can side load it to the BB10 device and see if it works or not. If there is not yet any .bar file, there is an app called SideSwype that can convert many .apk apps to .bar and install it to your device.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Unable to load Facebook on MBP in any browser - looking for more information

I have searched the Internet far and wide trying to figure out what is wrong, but every suggestion I have tried has failed. So here is my question:
Last night, I turned on my MBP and tried to log onto Facebook. I use Google Chrome as my default browser. Chrome was unable to connect to www.facebook.com. I tried in Safari also with no luck. Facebook seems to be the only web site I cannot connect to. Over the same wifi connection, I was able to connect to Facebook from my home PC, my iPad, and my iPhone (the actual web site and thru the app).
This morning, I brought my MBP to work to try again. Same problem. I cannot access Facebook from my MBP, but I can from my work PC and my other iOS devices. I even tried turning Personal Hotspot on my iPad and connected my MBP to that. Still no luck.
Based on everything I've read online, I've done many things to try to resolve this. I've cleared my cache and cookies, I've rebooted my MBP several times, I've flushed my DNS. I've even tried using Open DNS. I even tried some of the more ridiculous sounding ideas, like changing the date on my MBP. I am currently running Sophos in hopes that maybe the reason this is happening is because of some malware or trojan or something. The only thing I HAVEN'T done yet is completely reinstalled Mountain Lion. Honestly, I would rather avoid having to try this approach, as it seems that is a slightly extreme approach to fixing what should be a relatively straightforward problem to diagnose.
I've been racking my brain, trying to think of any updates I could have done in the last day or two that might have caused this very specific problem. According to System Information, the last set of updates I probably made right before this problem manifested were for Microsoft Office. I'm showing "Office 2011 14.2.5 Update", "Microsoft Error Reporting for Mac", and the very cryptic sounding "Plugin" as all having been installed yesterday. Based on the times each was installed, "Plugin" was not installed with the Office updates, so I'm wondering if maybe that is the culprit. Unfortunately, I have no more information than that.
I guess what I'm looking for are ideas on how I can better diagnose what is going on. I've tried the solutions people have posted online to no avail. If I knew what was happening behind the scenes, that might help me figure out what I really need to do to get this working again, before I'm forced to resort to a reinstall of Mountain Lion that may or may not even resolve this issue. If anyone has better ideas on what could be wrong or ways in which I can get more information to better diagnose this problem, please post them here. Thank you!

I didn't think reinstalling was gonna do me any good except for getting rid of every single thing I have ever installed since getting this MBP. I'm thinking it has to be something that is on my computer causing this, especially since it only affects my ability to get to this one site and I only started seeing this problem yesterday.
So, I went ahead and disabled all my Chrome extensions and I don't have any Safari extensions at all. That didn't fix my issue.
I've been trying to run Sophos on here, thinking that maybe I've got a Trojan or some kind of malware, but it never seems to finish a full scan of my hard drive. That "Plugin" that I mentioned above has me very suspicious, except that whatever that is, it's been on my computer since basically when I first got it. Maybe it's malicious, or maybe it's just a poorly named piece of software. In any case, it got updated last night around 11pm, about the same time I noticed my problem. After trying everything I have, it's hard for me to overlook that as coincidence.
But, where do I go to gain more information about what that could be? I should mention that this MBP is basically my first Apple computer. I've been a PC guy (still am mostly) forever, but I finally dove in and got a Mac to start iOS development. So I'm sure there are ways to get more information than I am currently aware of.
Also, apologies if I posted this in the wrong forum.

Looking for Print Server for HP Photosmart C4483 All-in-One Printer

I am looking for Print Servers that I can use with 'HP Photosmart C4483 All-in-One Printer' for both 'Printing and Scanning'. I'm not sure if this Printer is Network Ready or Network Capable, kindly advice.

Hello Merole
As I understand it you can print color everywhere but from MS Word 2013? If this is the case try the steps I have outlined below to see if they resolve your issue:
On the View tab, in the Color/Grayscale group, click Black and White.
On the Black and White tab, in the Change Selected Object group, click the settings that you want.
I hope this helps resolve your printing issue. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I am looking for a hp scan jet 4600 drivers for lion

Similar Messages

Maybe you are looking for