I am looking for a ppd print file for the laserjet 400 M401dn running under cups on ubuntu.

laserjet 400 M401dn
Ubuntu 10.04/11.04/12.04 under CUPS 1.5

Hi jewels123,
You can find HP Linux OS based printer support for your printer by clicking the link below.
http://hplipopensource.com/hplip-web/models/laserjet/hp_laserjet_400_m401dn.html
For more information about HP with open source support visit the links below.
Open Source and Linux from HP
http://h10018.www1.hp.com/wwsolutions/linux/products/printing_imaging/
HP Linux Imaging and Printing: Print, Scan and Fax Drivers for Linux
http://hplipopensource.com/hplip-web/index.html
Say "Thanks" by clicking the blue Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"; therefore, it's easier for others to find.
I am an HP employee.

Similar Messages

Download printer files for j4550

lost cd printer files for Officejet J4550 all-in-one have imac os 10.4 - had a problem with it and apple reinstalled all files, now I find I can print anyt;hing from computer

Hi,
Make sure to plug the USB cable first, then install the Full Feature Software below:
http://ftp.hp.com/pub/softlib/software10/COL22288/mp-58822-2/OJ_J4500_Mac.dmg
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Printing files on the application server

Hi,
I am looking for ways to print files residing on the application server. Do you know of any function modules/transaction code that can do this?
Here is my situation:
I am using GRAPH_PRINT_POSTSCRIPT_FILE to print postscript file to the printer. I have no problem using this FM. The issue is that this function only prints files residing on the PC/local computer. It doesn't print any files on the application server.
Thanks in advance for any help you can provide.

Hi,
use
   CALL FUNCTION 'F4_DXFILENAME_4_DYNP'
     EXPORTING
       dynpfield_filename = 'P_FNAME'
       dyname             = 'ZFILE_HELP'
       dynumb             = sy-dynnr
       filetype           = 'P'
       location           = 'A'.
Thanks,
NN.

I have a MacBook Pro and can't print pdf files or word documents using my HP Wireless Photosmart Printer. It will print files from the internet. Any suggestions or ideas will be greatly appreciated. Thank you.

I have a MacBook Pro and can't print pdf files or word documents using my HP Wireless Photosmart Printer. It will print files from the internet. Any suggestions or ideas will be greatly appreciated. Thank you.

Hello, SoonerAnesthetist.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
OS X Mavericks: Solve printing problems
http://support.apple.com/kb/PH14142
Cheers,
Jason H.

Can you let me know if any personal information is backed up to the cloud ? For example my design files in the workspaces - Thanks

Can you let me know if any personal information is backed up to the cloud ? For example my design files in the workspaces - Thanks

The only thing backed up from InDesign is the limited number of settings in the Sync Settings preferences, and only if you choose that option. No design files are backed up.
If you choose to use the File Sync files feature of the Creative Cloud desktop app, you can choose to copy files for yourself or to share, but that it's turned off by default.
https://helpx.adobe.com/creative-cloud/help/sync-files.html

Best/Easiest Practice for Distribution of Webhelp files for Fat(ish) Client Application

So another in my long line of questions in trying to change the implementation of the help systems at my new employer.
So, the pressure is to convince the existing guard to toss out the old method and go with a new method... One of the issues has come up for CSH Webhelp (via RH10)...
Apparently, in the old method (where every help topic was it's own CHM - no, I'm not kidding). They kept it that way so that any time a help file was updated, they could just send out that one chm to update that one topic.
Now they are worried that if we switch to webhelp using topics in one single big project that we can't just send out a single updated file any more...
So I'm trying to get ammunition as to how updates to the help can be distributed without it being a big hassle...
We do have small updates that go out about every week, and they are afraid that going to the webhelp (1 project with lots of topics) method will require more time and effort for the techs because they will have to complete the update of a huge help system every time.
One solution we have suggested is that we only update help files on major releases and add any changes to help procedures in the Release Notes or in a separate PDF and also include a note that the help files "will be updated to reflect this change in the XX/2015 XYZ Release).
Does ANYONE have any other ideas of how distribution could be done efficiently so that we don't have to continue this "project per topic" fiasco?
HELP!!! PLEASE!!!!

Amebr - you hit the nail on the head... i want to apologize to everyone for all this mass hysteria...but this has been a freaking rollercoaster... one day they are happy with the plan, the next day they decided they want to complicate it more... So now my job is to find out how viable and how tricky and perhaps how dangerous it will be to send out JUST the files that have been changed. Especially for CSH!
Anyone have any experience with this or have any advice? Peter? I suspect you might know how this might work... are they any pitfalls to watch out for.. I just have this fear of sending out a few files from an entire project... Altho, it appears when I publish, ONLY the files that have been edited in some way show a new date.. that includes non-topic files - so i'm assuming sending all those will keep the TOC, Index, and Search features working properly... as well as incoming and outgoing links from an edited topic?
Another question would be how to handle new images in a project... as the image folder tends to be the largest, i don't want to have to send the entire image folder... Thoughts...???? Advice? Jeff? Peter? Amebr? Bueller? Bueller? Bueller....?
THANKS!Best/Easiest Practice for Distribution of Webhelp files for Fat(ish) Client Application
OH... and Jeff... my apologies for the misnomer of using the term "Fat-ish" client in reference to this... I totally misspoke and should have said Mobile App... but in my mind, any time you have to download something to use it, it's a fat client... sorry! :-/

Does Reader for iPad store PDF files for viewing later when offline?

Does Reader for iPad store PDF files for viewing later when offline?
I'm asking because I have my portfolio as a PDF and I want to take my iPad with me to interviews, where I won't have Internet access, to show my portfolio.
Cheers,
Matt.

Awesome, I had hoped adobe were on the ball with this, but it's worth finding out beforehand.
Thanks!

Add option for lossless uncompressed RAW files for A7r

I'd like to see the option for lossless, uncompressed RAW files for those of us who want it vs. the current situation of only having the option of lossy compressed RAW files (which in some instances, can exhibit posterization). I think this is a logical option for a camera of the A7r's calibre. If this option can be incorporated via firmware update, all the better. If it's a hardware issue, hopefully this is addressed in the next iteration of the camera.

Honestly, this is pretty deceitful marketting on both the Sony A7 and A7R literature. both promote the use of 14 bit RAW encoding as a feature of the two sony cameras, however, they are really 11 bit + 7 bit compressed lossly RAW formats, delivering no where close to the same tonality of 14 bit true RAW. in no sony literature that i could find, is it mentioned that it's lossly. this is accurate? Not even close. 14-bit RAW output for rich tonal gradation 14-bit RAW image data of extremely high quality is outputted by the a7. This data fully preserves the rich detail generated by the image sensor during the 14-bit A/D conversion process. When developed with Sony's Image Data Converter RAW development software, these images deliver the superb photographic expression and rich gradation that only 14-bit data can offer. I was going to purchase two A7R bodies and move my canon gear over to Sony ..until really all this came out. I'm hoping as well as the OP that a firmware upgrade comes out.

I want to buy an hp m1536 laserjet for my ipad printing, I believe the printer is not wireless but has sprint. Is the print job going through my wireless router and does that router need to support AirPrint.

I want to buy an hp m1536 laserjet for my ipad printing, I believe the printer is not wireless but has sprint. Is the print job going through my wireless router and does that router need to support AirPrint.

The following model is airprint compatible, is this the one you have?
HP LaserJet Pro M1536dnf MFP
If not the "dnf MFP" model, then no.
The router needs to support the Bonjour protocol. If not, the airprint won't work.

Printer Status (HP LaserJet 400 M401dn)

I'm using printer in software and I need to know status of printer (jam/toner low/paper etc.).
PJL status for my HP LaserJet 400 M401dn always return code "10023" (even if door opened, no cartridge, jam); same issue in this thread: http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/LaserJet-CP1525n-Color-PJL-INFO-STATUS/...
I also tried to get Windows spooler status, it was not informative, too.
But HP notification software always sends message on "opened door" and even on "no paper". Could I somehow get similar status for printer?

Hi,
Based on the following link, it does not have wireless capability but it has a LAN port:
http://www8.hp.com/au/en/products/printers/product-detail.html?oid=5096262#!tab=specs
The Airport Extreme has 3 LAN ports:
http://www.apple.com/au/airport-extreme/specs/
Therefore you can connect the printer to one port using normal CAT5e or CAT6 cable and the printer will work similar to this:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can generate the TKPROF file without the SQL is not running completed ?

Dear all:
I want to generate the TKPROF file from the trace file, Can generate the TKPROF file without the SQL is not running completed ? Is it the TKPROF file can be used? because the report is too large. My environment is ORACLE 11.5.9
Regards
Terry

When you can wait for completion, then that's the easiest route.
When you can't wait, you'll have to use a different method. I suggest to watch the v$ views for what your session is doing. Views like v$session, v$session_wait, v$sess_io and the views starting with v$sql. Also worth mentioning is Tanel Poder's site, which contains some very useful scripts for diagnosing performance problems this way: http://tech.e2sn.com/.
Regards,
Rob.

I give up! Can I send someone the ID CS3 file and print file for Help

I have done everything I possibly can (given I am no where near expert), and can not figure this printing out.
I have a food menu that is on 11 x 17 (will be tri fold) ID file with a border. The border is a "Placed" PSD file into a separate ID layer.
Even though it looks perfect on the screen, I can not get it to print properly using an Epson Stylus 1400 series printer (wide body).
The border does not print correctly.
I can (and will if you want), print the menu to a file and send it to someone (along with the ID CS3 file and PSD file) to see if someone can tell me what stupid things I am doing.
I also believe I can print to a file, then bring the printed file up on the screen and do a Snagit Screen Grab to upload to pixentral.com If this is possible, you will see how the border did not print correctly. I would also take a screen grab of the ID CS3 menu file so you can see how the border is perfect.
I am hoping someone with a wide body printer can load 11 x 17 paper and try to see what I am doing wrong. I am printing it on 11 x 17, landscape, centered borderless stock and it looks good in preview mode.
Any and all help would be appreciated. At least I don't have those OOLLM phantom lines like I did on my last plea for help.
Bob

Hmmm.
Looking at the last picture, I see what is going to be a bit of a problem for you, I think. Do you really have a thin red line around the outside of the yellow border?
Here's how bleeds work, and why they are set up the way they are. Printing, and more importantly, trimming, is done on mechanical equipment. Paper sizes may or may not be entirely uniform in a stack, or there may be minor alignment issues when jogging the stack, or there may be dust build-up, or any number of other little things that conspire to keep a stack of prints from being 100% perfectly aligned with each other, or a cutter setting may be off by a few thousandths of an inch making the trim larger than intended. In such cases there is a possibility that color intended to run all the way to the edge of the page may in fact stop short of the trimmed edge, leaving the paper showing.
To hide this, and that's all you are doing, hiding misalignments, areas of color at the edge of the page are extended beyond the page boundary, typically 1/8" in the US, so that the excess color will fill what would otherwise be a blank area after trimming. InDesign Allows you to set up a "Bleed Area" in the document setup, which adds a colored guide around the page for easy reference, and also allows you to check the "use Bleed Area" checkbox in the print dialog so you don't need to specify it manually.
Now for why that narrow red line is a problem, if it is really there. Printing presses typically can maintain sheet to sheet registration that is very accurate, but desktop printers are often off by as much as 1/16" in either direction from sheet to sheet. Further, there can be some paper stretching during the printing process, and the aforementioned dust build-up or slight errors in cutter setup, which can cause the paper to be trimmed slightly inside the intended mark. Also consider that if the paper is cut outside the mark on one edge, it will be cut the same distance inside on the opposite side.
So, if you have a thin line on the edge of the page, you need to be very accurate in both sheet-to-sheet registration AND in cutter setup or you risk cutting off the line on one or two edges completely, and leaving more than you planned on the opposite edges. The thinner the border is, the greater the risk of cutting it off, and the more small differences in position will show. (The difference between 1/16 and 1/8 is much more obvious than the difference between 1/16 and 3/8 )
As a corollary, jobs that bleed need to have a safe zone, or "live area" that is smaller than the page dimension by at least the amount of the bleed allowance all around so that trimming at the outside of the bleed on one edge doesn't end up cutting off something important on the opposite edge. The easiest way I can think of to visualize this is to think of trimming as if you were putting an open frame the finished size on top of the print, and you move it around so that the hole exposes more on one edge while hiding the opposite edge the same amount.
Peter

Best exporting practices for complex artwork for indesign to print file

Hey there,
Just a question, I have 4 moderately complex vector art works that are being used in a print campaign. These have a few transparencies and multiply effects (eg shadows and shines etc)
Now to get these files into indesign for the designer to put into the print material, what is the best practice a) to keep printers happy b) keep artwork accurate to signed off proof.
I understand cleaning up file and checking for spots, bleed, rgb, rich black vs 100 black, overprinting white problems blah blah. What I want to know is - is it better to keep it layered eg. pdf 1.4 or flatten it from the start as 1.3 pdf set to "high" for flattening etc? Which gets the best end results and what keeps printers happy?
Any feedback advice would be gold.
Cheers ...

Shouldn't matter in any way. ID will do any flattening if and when necessary based on the native AI file's properties.
Mylenium

I am looking for an existing ADM file for group policy to disable Javascript

Does anyone know if there are any ADM files for acrobat versions 5,6,7, and 9? I also am looking to disable Javascript from the Adobe Reader 9 and X.

Yes, to get your instrument drivers for this device go to the following link:
http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/0027109f3d6e32dd86256d6d0068a5bd?OpenDocument
If this link doesn't work:
Goto Ni Home,
NI Developer Zone
Instrument Driver Network,
Set Manufacture criteria to: Hewlett-Packard
For additional keywords type: 33120A
click go
and there it is....
Good luck,
Greg

HPGL2 test print file for Designjet T520

Is there an HPGL2 test file for a DesignJet T520 36-In that I can directly send to the printer to verify settings and operation?
I am printing from Windows 7 64 bit and receiving frequent print errors relating to paper size mismatch.

Hello Richard3656,
Welcome to the HP Support Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Designjet ePrint and Share.
I hope this helps!
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

I am looking for a ppd print file for the laserjet 400 M401dn running under cups on ubuntu.

Similar Messages

Maybe you are looking for