I am looking for a programmable linear actuator which can travel 18in in vertical direction.If some one can suggest me with apprapriate model it wil be a very helpful for me.Thank you
We want to put the actuator in a vessel with diameter of 9''and fix it to the flat bottom vertically.
Also the actuator should be in the center axis of the vessel. The active end of the actuator will be
connected to our sample holder which we can design according to the actuator.
Now we want to control it to realize reciprocating motion.
For example:
1) go up to15'' and hold 30 min;
2) go down to 5'' and hold 15min;
3) repeat 1) and 2) 50 times.
Vessel Pressure: 150psi; Temperature: 50-70℃(estimate)
Attachments:
Actuator application.pdf 64 KB
Hey Li,
Check this site Stage Advisor, for a list of motors that will travel at least 15'' and that are compatible with our Motion Controllers.
You can always just go to the Advisors for Motion to change the specs you want to look for.
Hope this helps!
National Instruments
Applications Engineer
Similar Messages
-
Question:
I'm out of the US with my PowerMac G3 and plugged directly to a 220 volt current. It blew up! Is my computer fried or can it be repaired? I'd reaally appreciate anyone's help... thanks.You didn't indicate whether you have a beige G3 or a Blue & White model. In the case of the former, you'll be limited to buying/installing a used PSU, whereas a Blue & White G3 can use a modified PC ATX power supply. You need to buy one with a fan at the rear of the PSU (or 2 fans - front & rear), to create the same direction of airflow as Apple's original. An ATX PSU with a large fan on its underside is ideal for many PC builds, but not suited for use in a B&W G3. It's recommended to use an ATX extension cable and modify it, instead of altering the wiring on the actual PSU (for warranty reasons). You can read about the cable modification under the heading "ATX Power," on this "Accelerate Your Mac" page.
-
I have forgotten my password for mountain os. I have followed the instructions about going to "User group" and enetering my apple ID. It doesn't work. Can anyone help me? Thank you.
Welcome to the Apple Support Communities
https://discussions.apple.com/docs/DOC-4101 -
I have an iPod touch 4th gen that is in iOS 6.1 it's showing another update in the settings for iOS 6.1.6 but even if I wait for more than 30mins it won't show. Can anyone help me. Thank you and Godbless
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- Try when connected to another network
- Update via iTunes on a computer. -
I bought an album on iTunes and 3 of the songs only play for 30 seconds. I have tried re-downloading the album 3 times and the problem has not been fixed. I would like some help please and thank you.
Artist: Imagine Dragons
Album: Night VisionReport it here:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
I use firefox 3.6.22 and google chrome, my google chrome works perfectly so i know my internet is connected, but when i try to use firefox, i am unable to connect or go into any website. I need to be able to use this firefox for fafsa thank you.
Firefox works fine on Windows 2000 SP4 for me.
Any chance you have a dial-up connection that uses a web accelerator to speed the loading of content? -
hi i have a iphone5 I lost my password ha possibility I make the switch for 5s can not open the icloud?? if accepted as pay the difference? thank you for it helped.
Post in your native language. Your post is very difficult to understand. What password are you talking about? You device passcode? Your Apple ID password?
-
Hi I bought an app - storytime for kids, it had just two books and i downloaded three more books but when i tried to download the fourth book the app is not responding. can you help me? thank you.
Try force quiting the app. From the users guide:
Force quit an app: Press and hold the On/Off Sleep/Wake button for a few seconds
until a red slider appears, then press and hold the Home button until the app quits.
You can also remove an app from the recents list to force it to quit. See “Opening and
Switching Apps” on page 23. -
Hi, how can I set up icloud for my ipad and iphone5? I missed tout he initial setup step and now want to have both the devices under icloud. Please help...thank you!
Go to Settings>iCloud and sign in with your Apple ID to create the account. Then turn on the data you wish to sync with iCloud. See http://www.apple.com/icloud/setup/ios.html.
-
How to recover deleted photos iniphone4s?It is very improtant for me.Thank you!
How to recover deleted photos iniphone4s?It is very improtant for me.Thank you!
If deleted photos from your iPhone and did not backup up to a computer or iCloud, they cannot be recovered.
-
Cannot upgrade my iTunes to version 10.4.1---get message---The following install step failed: runupgrade script for Apple mobile device support.--Contact softwae=re manufacturer for assistance.
Can someone help me?
Thank you.
Geraldme too did you get any help?
-
hello, since I actualized my Mac with Maverick it doesn't recognize any external hard disk ,... only the one to make copy on the time machine. Can anybody help me? thank you!!!!
Hello Laurabcn,
Thank you for using Apple Support Communities.
For more information, take a look at:
USB and FireWire Quick Assist
http://support.apple.com/kb/ht1151
Have a nice day,
Mario -
I have an ipod touch 4th gen and when I plug it into my computer it shows up but it wont on iTunes and I was trying to put more music on it today and it wasn't showing up can u help please and thank you.
Hey Babetta94,
Thanks for using Apple Support Communities.
After reviewing your post, the iPod is not recognized in iTunes. A frustrating situation to be sure. You haven't mentioned what OS the computer you are using uses. You can choose what article to use either OS X or Windows from this quoted section.
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716
If you have an iPod touch:
For Windows: See iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
For Mac OS X: See iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Have a nice day,
Mario -
Hi all,
I am having some problem with the Apple Wireless Keyboard. It has not problem connecting to both my iPad mini / iPhone 4S.
The problem comes when I start to type with it. All the keys are functioning will, except when I am trying to capitalise the letter 'r'.
I tried using Shift + r. It doesn't work, regardless whether I use the left or right Shift key.
Any someone help please. Thank you.If your Macbook is less than a year old, it is under warranty. A repair of of a problem of this kind would be free. So, if you have a warranty, have the problem fixed by Apple.
If your Macbook is more than one year old, please tell us what operating system you are running, and any other information that would help understand what is going on.
If you do get the keyboard to work for a short time, long enough to post back, please unlock the "caps lock" button. -
I have a 2009 13"MacBook pro running on OS X 10.6.8.
How do I know whether this is leopard or mountain?
What would you advise that I use as I need to be running OS X 10.7?
Also can you advise how I upgrade please?
All help appreciated. Thank you.Thank you for your response Niel.
I do run Microsoft Office 2011 - will Snow Leopard support this?
Finally why snow leopard and not mountain lion?
Maybe you are looking for
-
Thinkpad keys once and for all
There are lots of people out there having problems to get thinkpad keys to work. I would like to solve this issue and potencially write a wiki page about that. Here is the information I got till today: 1. the ibm-acpi module is renamed to thinkpad-ac
-
Dates for Backwards scheduling when MRP Run
Hello experts, When MRP run, which calendar does SAP take to schedule planned orders? where could I indicate it? Thanks in advance. Laura
-
Files with broken links that only show in Smart Playlists
Hello, My issue is a strange one, so please bear with me. First - I've had the same iTunes library for several version of iTunes. That might have something to do with my issue. The issue is that when I create a Smart Playlist filtering for genre=podc
-
I update all the song tag information using windows explorer and then drag and drop into itunes 11. The song information e.g. artist, title, comments, do not show for all songs. Itunes intermittently grabs some information and not other data from t
-
The task cannot be processed further until the current edit session is act
Dear Sir/Madam I have installed standalone Oracle WebLogic Server 11g(10.3.6) with Sherman Update3,for I used JDeveloper 11g Release 2 (11.1.2.3.0). I Sometimes got below message for several times and it can be repeatable when I have wanted to deploy