I am looking for an existing ADM file for group policy to disable Javascript

Does anyone know if there are any ADM files for acrobat versions 5,6,7, and 9? I also am looking to disable Javascript from the Adobe Reader 9 and X.

Yes, to get your instrument drivers for this device go to the following link:
http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/0027109f3d6e32dd86256d6d0068a5bd?OpenDocument
If this link doesn't work:
Goto Ni Home,
NI Developer Zone
Instrument Driver Network,
Set Manufacture criteria to: Hewlett-Packard
For additional keywords type: 33120A
click go
and there it is....
Good luck,
Greg

Similar Messages

Best/Easiest Practice for Distribution of Webhelp files for Fat(ish) Client Application

So another in my long line of questions in trying to change the implementation of the help systems at my new employer.
So, the pressure is to convince the existing guard to toss out the old method and go with a new method... One of the issues has come up for CSH Webhelp (via RH10)...
Apparently, in the old method (where every help topic was it's own CHM - no, I'm not kidding). They kept it that way so that any time a help file was updated, they could just send out that one chm to update that one topic.
Now they are worried that if we switch to webhelp using topics in one single big project that we can't just send out a single updated file any more...
So I'm trying to get ammunition as to how updates to the help can be distributed without it being a big hassle...
We do have small updates that go out about every week, and they are afraid that going to the webhelp (1 project with lots of topics) method will require more time and effort for the techs because they will have to complete the update of a huge help system every time.
One solution we have suggested is that we only update help files on major releases and add any changes to help procedures in the Release Notes or in a separate PDF and also include a note that the help files "will be updated to reflect this change in the XX/2015 XYZ Release).
Does ANYONE have any other ideas of how distribution could be done efficiently so that we don't have to continue this "project per topic" fiasco?
HELP!!! PLEASE!!!!

Amebr - you hit the nail on the head... i want to apologize to everyone for all this mass hysteria...but this has been a freaking rollercoaster... one day they are happy with the plan, the next day they decided they want to complicate it more... So now my job is to find out how viable and how tricky and perhaps how dangerous it will be to send out JUST the files that have been changed. Especially for CSH!
Anyone have any experience with this or have any advice? Peter? I suspect you might know how this might work... are they any pitfalls to watch out for.. I just have this fear of sending out a few files from an entire project... Altho, it appears when I publish, ONLY the files that have been edited in some way show a new date.. that includes non-topic files - so i'm assuming sending all those will keep the TOC, Index, and Search features working properly... as well as incoming and outgoing links from an edited topic?
Another question would be how to handle new images in a project... as the image folder tends to be the largest, i don't want to have to send the entire image folder... Thoughts...???? Advice? Jeff? Peter? Amebr? Bueller? Bueller? Bueller....?
THANKS!Best/Easiest Practice for Distribution of Webhelp files for Fat(ish) Client Application
OH... and Jeff... my apologies for the misnomer of using the term "Fat-ish" client in reference to this... I totally misspoke and should have said Mobile App... but in my mind, any time you have to download something to use it, it's a fat client... sorry! :-/

Does Reader for iPad store PDF files for viewing later when offline?

Does Reader for iPad store PDF files for viewing later when offline?
I'm asking because I have my portfolio as a PDF and I want to take my iPad with me to interviews, where I won't have Internet access, to show my portfolio.
Cheers,
Matt.

Awesome, I had hoped adobe were on the ball with this, but it's worth finding out beforehand.
Thanks!

Add option for lossless uncompressed RAW files for A7r

I'd like to see the option for lossless, uncompressed RAW files for those of us who want it vs. the current situation of only having the option of lossy compressed RAW files (which in some instances, can exhibit posterization). I think this is a logical option for a camera of the A7r's calibre. If this option can be incorporated via firmware update, all the better. If it's a hardware issue, hopefully this is addressed in the next iteration of the camera.

Honestly, this is pretty deceitful marketting on both the Sony A7 and A7R literature. both promote the use of 14 bit RAW encoding as a feature of the two sony cameras, however, they are really 11 bit + 7 bit compressed lossly RAW formats, delivering no where close to the same tonality of 14 bit true RAW. in no sony literature that i could find, is it mentioned that it's lossly. this is accurate? Not even close. 14-bit RAW output for rich tonal gradation 14-bit RAW image data of extremely high quality is outputted by the a7. This data fully preserves the rich detail generated by the image sensor during the 14-bit A/D conversion process. When developed with Sony's Image Data Converter RAW development software, these images deliver the superb photographic expression and rich gradation that only 14-bit data can offer. I was going to purchase two A7R bodies and move my canon gear over to Sony ..until really all this came out. I'm hoping as well as the OP that a firmware upgrade comes out.

I have removed some ADM templates from group policy but are still showing in RSOP

I removed some old custom ADM templates from group policy but they are still showing up when I run RSOP.MSC.
How do I get RSOP.msc not to show these old custom ADM templates? I'm not able to find what I'm looking for in my searches.

Hi,
Even you remove these custom ADM templates, the policy settings configured by these custom ADM templates still exist. We can try to import these ADM templates again then un-configure
the policy settings set by these custom ADM templates. After refreshing the policy settings, we can delete the custom ADM templates.
Best Regards,
Erin
Thanks. That almost works. When I import a new updated template with a different name but with some of the same settings, the old template shows up again.

Disable Virtual Memory/Page File/Paging File Via Group Policy

We have several machines running Windows Server 2012 and we wanted to disable the paging file using Group Policy. It took a while to find the answer but I got it working and I wanted to share with you how this is done. First of all, to do this
manually, you would need to follow these steps:
1)Right-click Computer, select Properties.
2)Click on Advanced System Properties
3)Choose the Advanced tab
4)Under Performance, click the Settings... button
5)Choose the Advanced tab
6)Under Virtual Memory, click the Change... button
7)Choose No paging file
Obviously this process is cumbersome just for one system let alone a dozen or more. To take care of this automatically using Group Policy, you will need to do the following:
1)Create a GPO, then go to the Group Policy Management Editor
2)Navigate to Computer Configuration>Preferences>Windows Settings>Registry
3)Create a new registry item using the following settings:
a: Action: Replace
b: Hive: HKEY_LOCAL_MACHINE
c: Key Path: SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management
d: Value Name: PagingFiles (do not check the Default option)
e: Value type: REG_MULTI_SZ
f: Value data: 0x10000
There is no specific setting in group policy to disable the paging file, so you must instead follow these procedures to allow group policy to modify a registry key in Windows. I tested it out on a Windows 7 computer and a Server 2012 machine.
No reboot was required, just a simple gpupdate /force command in CMD. Good luck, and don't forget to test it first! Not all systems or environments are created equal.
tags: page file, paging file, virtual memory, pagefile, pagingfile, virtualmemory, pagingfiles

> disable the paging file
Not supported by Microsoft... On all SKUs.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Where to copy existing XCM file for new b2c project?

Hi,
I have created one "b2c_myproject" application by using build tool. I have one b2c application running. I want to copy it's XCM setting to my new project.
I do not want to do setting by seeing each value in XCM. Any one has a Idea from where I can copy existing XCM files?
Thanks.
Ashish Patel.

Hi Ravi,
As per your instruction I copied XCM folder into desired location. But when I am accessing that xcm page like
"http://localhost:50000/b2c_myproject/xcm/admin/init.do"
But I can not see default setting which I have made to my original b2c applicaiton.
there are no XCM configuration under customer section.
pl. let me know where I am making mistake.
What I want actully, I want to see my basic xcm setting in my b2c_myproject so do not have to do basic xcm setting.
Thanks for your reply and helping me.
Ashish Patel.

How to set new value for the existing jar file

Help:
I am wondering if there is a simple to update value for Manifest-Version in a existing jar file?
Thanks!

The jar command's -u option is about as easy as I know.
See the jar command documentation for the details.

Looking to build a batch file for BCDedit

I'm trying to build a batch file for bcdedit to get the variable off of one of my boots for the identifier to use to build my dual boot system. I've been testing with trying to just get the identifier but I'm unable to get the variable when I try.
Any help will be greatly appreciated!
I've ran all the steps individually and they function like they are supposed to.
Here is the basics.
First I need to change the descriptions around so
bcdedit /set {current} description "Staff"
bcdedit /set (insert variable for second boot) description "test"
next I need to change order
bcdedit /displayorder {current} /addfirst
Last is to set the second drive partition
bcdedit /set (insert variable) device partition=D:
bcdedit /set (insert variable) osdevice partition=D:

This is how I was finally able to get it up and working. I just got it this morning. I did end up having to use powershell:
#Set the colors for the console window
$Host.Ui.RawUi.BackGroundColor = "Black"
$Host.Ui.RawUi.ForeGroundColor = "White"
#Clear the screen
cls
Function WriteValue ($Label, $Value)
   Write-Host $Label -foregroundcolor "Gray" -NoNewLine
   Write-Host ": " -foregroundcolor "Gray" -NoNewLine
   Write-Host $Value
Function WriteSuccess
   Write-Host ": " -foregroundcolor "Gray" -NoNewLine
   Write-Host Success -foregroundcolor "Green"
$otherboot = bcdedit /enum `
| Select-String "path" -Context 2,0 `
| % { $_.Context.PreContext[0] -replace '^identifier +' } `
| ? { $_ -ne "{current}" }
bcdedit /set $otherboot description "Test"
bcdedit /set $otherboot device partition=D:
bcdedit /set $otherboot osdevice partition=D:
WriteValue "Boot ID is" $otherboot
WriteSuccess

Best practice for exporting a .mov file for YouTube

I am using FCPX 10.0.9 with a MacBook Pro. We are needing to upload relatively small-size high school football videos as .mov files to YouTube for my newspaper. I have been choosing the Export File option with the setting set to h.264, exporting the file to the desktop and then uploading that .mov file to YouTube. (I do not have Compressor installed on this Mac.) The other night the first of three files done like this uploaded fine, but the next two just kept processing and processing at YouTube and never finished. The following morning the files processed fine. Any thoughts about why ths might be happening?
And would it be better to export in another file format --.mp4 files -- instead that might cause less of a problem and which of the export options would be best?
Thanks,
Douglas

douglas i wrote:
Am I correctly uploading a .mov file to YouTube by using the Export File command with the export setting set to .h264 then if I wish a reasonable size file for upload?
Sure. There are many ways to get videos to YT and yours is a reasonable approach.
"Reasonable size" should be thought of in terms of upload time. Again, YT will re-compress whatever you give it. So depending on how quickly you need to get it up on the Web, it's better to upload files that have more information than less information. (To that end, some folks upload very large Pro Res files; they also have a lot of patience.)
Just to let you know, the majority of FCPX users follow one of two workflows:
1) Share>You Tube option and have FCP handle the uploading;
2) Export as a Pro Res Master File; bring the master file into Compressor and apply the user's custom settings; upload using YT's uploader.
FWIW, I prefer the second workflow.
Russ

What is the best program for splitting large video files (for archiving)?

I have just finished a project and I want to back up everything to DVD-R discs, including all my capture files and completed movies exported from Final Cut. Some of the files are 5 or 6 Gb, too large for one DVD-R disc.
I tried downloading a program called MacHacha, and did a test on one file, splitting it into 3 segments and then joining it back together with the same program. The resulting file should have been a duplicate of the original, but it was not. It was not even recognized by QuickTime Player as a .mov file.
What program do you use for this purpose? What program is reliable for this and produces a joined file that is identical to the original?
Thank you for your reply.

Thank you for your help and suggestions. I tried a couple of experiments with a video file that has chapter markers. This was created in FCE using the "Export - QuickTime Movie" command.
One experiment was to bring the file into a new, blank sequence in FCE. Then export it right back out as a QuickTime movie. The resulting movie appears to be identical to the original, except that there are no chapter markers any more.
The second experiment was to make a duplicate of the original sequence which I used to make the movie in the first place. In this duplicate, I deleted everything except the chapter markers. I then brought in the video file into that sequence and exported it. The resulting file appears to be identical, and this one does have the chapter markers.
The only problem with doing it that way is that I lose all my edits. What if I wanted to edit something or adjust one of my original edits? I can't go back to that stage, with all my original edits, if I don't have all the original source files.
In addition, it's not clear to me exactly how I would use FCE as the "splitting program." How do you split a sequence into smaller parts?
All I really want to do is take a "snapshot" of the entire project, including all the source files, capture scratch files, etc. I don't need to back up the render files because those can easily be re-rendered. The entire project is taking up about 72 Gb on my hard drive, and I want to offload the whole thing. Even if it takes me 20 DVD-R discs to do it, that's no problem. Someone must have come up with a program or solution to do this.
Thanks!

SAN for ocr and vote file for Linux RAC

Hi Experts,
Based on Oracle document, i have to create 2 devices for the OCR and 3 for the VOTE in RAC.
However, my boss think SAN maybe mirroe OCR and Vote file. It is enough for 1 location in SAN storage. It does not matter how many driver sidplay for user.
Actually it is only one SAN in back side.
Any Explain for OCR/VOTE file in SAN?
Thnaks
JIm

The idea to have these multiplex copy is to reduce the single point of failure, non the less, that's reason you build RAC in the first place isn't?
So if it's possible you'd better have redundancy on physical disk level (LUN etc) then logic level (volume, partition etc) then file level.
Well I agree modern SAN are pretty reliable and had built in redundancy on physical and logic level, but if you only have single vote disk and OCR, your RAC is going to fail right away when vote disk and OCR has problem. The chances are if your OCR and Vote disk has logical corruption, the corruption is going to populated to your mirrors. Even if your mirror is good you still need to get mirror copy to replace working copy and restart cluster during the time your RAC is offline.
With more than one OCR and voting disk, your RAC is likely to survive single OCR/vote disk failure, so you can fix the problem while RAC online.

Can't see ADMX files in Group Policy Editor

I have a problem with ADMX files on my Server 2008 r2 group policy. I start by going to group policy editor. Then I browse to Computer Policy and then Administrative Templates. There is nothing in there... Which is weird... There has always been stuff there...
So, then I go in to add templates back in... I find the ADMX files in C:\Windows\Policy Definitions and also \\domain\SYSVOL\domain\Policies\PolicyDefinitions and go to Add/Remove Templates. I click add and then browse to either directory (which has ADMX files
in them!) and see nothing. ADM files I can see fine. But ADMX I can't see. So, I see these links:
2008 R2 Server GP can't see admx files
I can't see admx files
Looking at them, they both say I should be able to see ADMX files in the central store...So I manually copy the ones in C:\Windows\Policy Definitions to the SYSVOL central store. Restart group policy editor... Nothing there when I browse the settings...
Still not able to add templates.
It looks like group policy editor doesn't know about ADMX files at all... Is there a registry setting or something that "enables" the ADMX files?
Thanks,
Scott

In gpedit / gpmc, the menu item : "Action -> Add/Remove Templates", is only applicable/useful for the older/legacy ADM files - the menu item isn't relevant for ADMX/ADML files at all.
The most common reason for an "empty" list of Administrative Templates settings, is an incorrect configuration of the Central Store.
The usual guidance tells us to place ADMX files here, to setup a CS:
\\domain\SYSVOL\domain\Policies\PolicyDefinitions\
This folder/file structure has to mimic what you would see at: C:\Windows\PolicyDefinitions\
If your domain is named contoso.com, you would need this:
contoso.com\SYSVOL\contoso.com\Policies\PolicyDefinitions\
In that folder, reside your ADMX files.
You also need the relevant locale subfolder, and in there, you need the matching ADML files.
The best way to establish that, is to go to C:\Windows\PolicyDefinitions\ on your RSAT PC, or DC, and copy all the contents including subfolders and files, into the equivalent folder of your CS.
Then exit GPMC (if you had it opened), and re-launch GPMC. No need to to anything else in GPMC, it will automatically, by default, look for a CS first, and, if no CS is found, will revert to the local policydefinitions folder structure.
But, if the CS folder structure exists *AND* is incomplete or incorrect, you will get your symptom.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Cannot Copy File with Group Policy Preferences

Hi,
I am trying to use a Group Policy Preference to copy a simple text file from a network share to a folder at the root of 'C:\' on the clients. It is not happening. I created the preference in the computer section of the GPO. It is set to create, as the file
does not already exist on the client, with the archive bit on.
Source: \\server.domain.com\folder\fileshare\file.txt
Destination: C:\folder
GPResult shows the clients are getting the GPO, but it seems as if that one setting and another is not being applied. I have no idea why this isn't working when other parts of the GPO are being applied. I read
the documentation on the Technet page, but I must have missed something.
Any ideas why this might not be working?
Thanks
Jason Watkins MCSE, MCSA, MCDBA, CCNA

> Computers" has read access. Listing the actual file name in the
> destination is something I would have never though to do.
...unless the path ends with an "\", it IS a file name, so if you had
"C:\Folder" as the target, check your C:\ drive for a file called
"Folder" :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Deploying Files with Group Policy - Help Needed

Hi,
I am trying to use group policy to deploy files and folders to our server estate. The policy I have created first creates a folder on each server's C drive and then coppies a set of files to this folder from a network share. The folder creation works fine
but the files copy fails. In the Application logs on the servers it displays the following error:
The computer 'ILMT' preference item in the 'GPO - Servers_Production_ALL {CC026B58-FA3B-4399-AA00-AE8E844B2B47}' Group Policy object did not apply because it failed with error code '0x80070005 Access is denied.' This error was suppressed.
Can anyone advise what exactly does not have access here? I don't know what I need to enable to get this to work.
Can anyone help?
Many thanks
James

The copy is on a file server share. presumably if I just give everybody read access to the share that would suffice?
No it won't.
"Sharing" requires several actions:
a) create the folder
b) share the folder
c) grant NTFS permissions on the folder
I think you've neglected action (c).
For your scenario, you need to grant the "server computers" read permissions to the folder.
You can add individual computer accounts, or a group, or "domain computers".
(In a similar way, you could grant access to a user, a group, or "domain users")
[if you need everybody (users) *AND* everything (computers), you could grant permissions to "authenticated users" since that principal includes *BOTH* users and also computers]
Note that "domain computers" and "authenticated users" include all types of domain member computers, i.e. servers, workstations, etc.
Also, note that granting a "computer account" access to a folder or share, does *NOT* mean that a user account on that computer can access the remote share, i.e. permission is granted to the computer account, and a logged-in user account on
that computer does not inherit any kind of access to the remote share by virtue of being logged in.
This means that the computer can access the share but the user cannot access the share. Because the computer account is an identity/principal of it's own accord.
[None of which really has anything to do with Group Policy at all - it's how Windows does file sharing and ACLs... ;)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

I am looking for an existing ADM file for group policy to disable Javascript

Similar Messages

Maybe you are looking for