I am looking for instructions on how to create a personalized signature at the end of email messages
I am looking for a tutorial or instructions about how to create a signature at the end of emails....Name, contacts, disclaimer info etc...to be posted at the end of each email..?
http://hosting.com/support/email/create-an-email-signature-in-mac-mail/
Similar Messages
-
I am looking for help on how to or where I can find information on how I can clean my hard drive and then reinstall Lion, Thanks
Boot from Recovery HD upon startup hold-down keys Command R . Until you see the Apple logo then select language:English.click the Arrow (Next)
From the OS Utility, select Disk Utility then click Macintosh HD. click the Erase tab on the right side.
Format:Mac OS Extended(Journaled)
Name:Macintosh HD
And click Erase
Once Erase process is done, close Disk Utility and select the second option in the OS Utility which is Reinstall OS. Let it run. It should take about an hour to complete, this type os installation is internet dependent so somehow the completion of the process depends on internet speed as well. -
TS3991 How can I apply a signature to the end of my mail on iCloud?
on my laptop I can apply a signature to the end of my mail but this is not available when I write a mail on iCloud...why is this?
This is a user to user community, Apple are unlikely to read your comments, if you have any suggestions that you think might enhance iCloud you can send Apple your feedback here.
-
How to add a signature at the end of each post
How do you add a signature at the end of each post (if possible)?
^^right now, I just have to copy and paste thatIt's possible to set up your signature on the Desktop such that it can be simply dragged into the Camera icon's "From the Web" field...
1. Right click on an already posted pic
2. Choose "Open Link in New Tab"
3. From the address bar of that new tab, drag the URL's favicon (little icon) to your Desktop whereupon an "@" icon will be created
The above only has to be done once, and then to use that image in future posts...
1. Click the Camera icon
2. Click "From the Web"
3. Drag the URL's "@" icon from your Desktop to the URL field and click Insert Image
And if you want your signature instead of a generic "@" icon, that's possible too: -
I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?
As long as you have a form of payment (credit or debit card) with a USA source, and with a billing address in the USA, then you just need to change your payment information on your account to that, change your country in the store settings, and you will then be able to shop in the USA store.
Your AppleID will work in any country's store, as long as your payment source and billing addres are also specific to that country (and you are in that country as well, as there may be IP filters in place to stop use outside of the country). -
I migrated info from a hard drive to a new mac under time machine. It says I have shared files, but I don't see the old info on the new machine. Where do I look for it ? How do I make the old backup the basis for my new macbook ?
The old OS was Mac X 10.5.8. I think the new one is 10.7.2 Lion.Have a read here How do I set up a new Mac from an old one, its backups, or a PC?
Stefan -
when trying to send a link off firefox via email the system looks for a g mail account that I do not have nor want to have. I've told the settings to use my outlook account but it keeps looking for g mail. how do i correct?
http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox
-
I updated to Mavericks and a bunch of my info deleted. I tried opening a previous iDVD I made, but when I click on it, it says to look for themes. How do I get my movie to work? Thanks.
Did you do an erase and install of Mavericks? If not look in the HD/Library/Application Support folder for an iDVD folder. There should be a Themes folder in it. If it's not there look in your Home/Library/Applications Suport folder for the iDVD folder.
NOTE: In Mavericks, 10.9, the Home Library is invisible so go to your Home folder and use the View ➙ Show View Options menu to bring up this window:
Select Show Library Folder. Now you can check to see if the iDVD folder in there.
If you find the iDVD folder launch iDVD, go to its Advanced preference pane and point iDVD to the Themes folder:
If you can't find the Themes folder you'll need to reinstall iDVD from the source you installed it from originally, i.e. the disks that came with your Mac or an iLife 09 or 11 disk.
OT -
Looking for BOM and Routing objects created with a BAPI
(I ran this one up the flagpole in the data forum and didn't get any responses. Maybe someone here has see this phenomon?)
I'm invoking BAPI_MATERIAL_BOM_GROUP_CREATE from an external Java program. I believe my code matches the example I find here and in the SAP documentation (transaction BAPI). When it finishes, I get a successful return (type=I, number=000), and a message of "BOMGroup 00000070/TAM1/1 has been created. External reference:" But I can't find anything back on the SAPGUI - the material number still says it has no BOM (on CS02); I don't see any new BOM Groups (on CS06). By the way, the "00000070" number seems to be assigned by SAP: I t increments each time I run my test, so I must be doing something; the TAM1 in that message is the plant, and the "1" is the BOM Usage I assign in my BAPI (both in the BOMGroup structure and the MATERIALRELATIONS structure). I do a commit transaction at the end too, although the BAPI to create the material created it without me doing a commit, so I don't think that was necessary.
(Update since I posted this on the other forum: I tried to create a routing and have the same result - 000 message number, and a message including an SAP-assigned number, making me think I've created an object, but I don't see it anywhere. Any idea which tables I can look at to find them, and maybe see what's missing (e.g., with SE12 or some such)?)
Any thoughts on what I AM creating? Or some little thing I'm missing here?
Thanks for any insight!
Thomas.check the post:
BOM and Routing with Dependencies
-Murugesh AS -
System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) finally gets through.
Other weirdness to report: my neighbor upstairs appears to have a Linksys router network on channel 6. My AEBS is on channel 1 so there shouldn't be interference... but according to iStumbler sometimes the signal leaps to 64000 (keep in mind my own Airport never tops 60)! Is that potentially the problem?
Might it be possible that your neighbor just acquired a 802.11n (pre-N) wireless router recently?
802.11n effectively increases capacity by doubling the number of Wi-Fi radios and increasing the number of antennas used to push signals out of those radios. 802.11n splits a data frame into multiple pieces. It then transmits these pieces in parallel using multiple radios that are attached to multiple antennas. These antennas blast out signals from virtually the same vantage point – scattering the signals everywhere.
You may find the following ZDNet article interesting: http://blogs.zdnet.com/Ou/?p=247
Even if he did not, and you are on good terms, you might want to ask if he can temporarily turn off his wireless, or, at least, reduce the signal strength to see if that will help in your situation. -
I'm converting from a PC to iMac. On the PC I have many Inbox folders with PR info for distribution. How do I get these folders from the PC to the iMac? I've used the Windows e mail Inbox folders for an easy access filing cabinet for years, as this all goes out on e mail. Thanks for assisting me!
I think the easiest way would be to use Migration Assistant to get all that over...
http://support.apple.com/kb/HT2518
http://support.apple.com/kb/DL1415 -
The outer surrounding frame has changed to a weird looking green colour. How do I get it back to the way it was?
Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages -
Looking for a crop that will allow me to keep all the heads the same size
looking for a crop that will allow me to keep all the heads the same size. Iam a School photographer and have been looking for a crop tool mask out liner ect that will alow me to crop and see that head sizes remain the same throught out a job can any one help with this question?
I *think* I'm understanding that Eisenray is asking. Similar to the crop overlays, like Grid or Spiral, he would like one with an oval, to help hi better size the heads in the photos. I believe in each photo, the heads have to be the same size.
What he *could* do, is create a rectangle with an oval punched out of it. He could drag the image to an 8x10 300ppi document, and that rectangle can be overlayed on his photo, then he can shrink/enlarge the photo to fit the oval...if that makes sense.
It's difficult to understand, do if I'm wrong, please let us know, Eisenray. -
Looking for FLASH developer/guru to create a Flash Intro for a Clan Site.
I am looking for a FLASH developer to create a custom FLASH
Intro for my gaming clan forums.
A bit about us:
Clan Name: =bURnT=
Site:
http://burnt.swisshut.com
Games Played: Battlefield 2 & Battlefield 2142
What we would like in the Intro:
- That it somehow complements our forums
- Includes the clan name
- Looks professional and loads within reasonable time
- Some sort of music / background soundtrack
We are a small clan and don't have the biggest budget but
please consider us and give us a estimate of price if you are able
to do this for us.
Regards,
Dieter Balmer (OzButcher)
[email protected]..please visit my personal site
http://bizgraphix.com
...thanks -
Need help to get access to iTunes store. I bought an iTunes card bor buying on iTunes store.
I forgot the answers for security questions, how can I reset them and get the access back to the iTunes store?If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support or Apple to get them reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or you could change to 2-step verification : http://support.apple.com/kb/HT5570
Maybe you are looking for
-
fui atualizar o softwere do meu iphone 4s e ao longo da atualização foi tudo normal, quando terminou, o itunes mostrou uma mensagem dizendo que tinha ocorrido um erro, e que eu deveria restaurar o iphone, comecei a restaurar, só que agora aparece uma
-
Mc-icons not sized correctly in Internet Explorer
The file icons used by Sun One Web Server 6.1 (/mc-icons) to indicate file types do not display correctly when a directory does not have an index or default file, and the web server automatically creates an index that includes these icons and shows t
-
I made a web page for our church and while the pages look good in all of my browsers (Opera, IE, Safari) when I look at them on an IE windows browser the fonts are not scaled correctly and they look as if they are bit-mapped. Is there a set of fonts
-
Ned to insert current Date AND Time in a table
Hi: This should be a simple one. I need to insert the current (system) date AND time in a columnof a table. From the documentation, it appears that the column datatype should be DATE (at least it claims to be able to support both date and time). It i
-
I have this happen to several users. The Blackberry will not receive email for several days. They will bring their Blackberry to me and all I do is turn the radio off and turn it back on and the Blackberry starts to receive emails. Anyone know what c