I am losing quality when importing images into ps touch?

Bringing in 12mp images from Nikon camera and losing quality (blurry edges, low quality, etc). Is there a setting I can change or is this what we have to deal with on ps touch?

use the touch forum http://forums.adobe.com/community/creative_cloud_touch_apps/adobe_photoshop_touch

Similar Messages

When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour. Can someone help?

When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour. Can someone help?
This is happening even with photos that were taken on another camera, not just mine. My daughter told me that the laptop recently fell. The yellow streak is not anywhere else on the laptop, just on the photos in LR.

I have had this problem on my desktop. I have been attempting to reproduce it where it can be debugged. Here are some observations/facts in my environment--no conclusions:
1. I do not import from camera or memory stick directly into LR. I copy all images (using Explorer) from camera to two different locations (backup location first); and then my working area. In both cases, after files are copied I mark them Read-only.
2. Poor observation, but in any event: the issue has only occurred when I do a large number of images. Its a poor observation as I have no exact number. I suspect when I do less than 50 always works well every time. However, I have also done some very large imports without issue.
3. Error only occurs with my RAW images--for me that's NEF. I have multiple cameras--those that only capture jpg images have never had an issue in LR.
4. Even if the file is marked Read Only issues can still occur. I then remove the image from the disk using LR -- and then manually (Explorer) copy in my backup image -- re import again and all is well. I think one time I exited LR and replaced the bad file with a backup and restarted LR and all was well again.
5. When it occurs I have performed a HASH value on the broken file and on the backed up file to determine if the file contents has changed--and each time the file contents has changed.
6. I have had this occur immediately after import, but most often it occurs like this... import large number of images; Make changes in Development Module on random image, export jpg of changes--exit LR. Open up LR and file is corrupted.
7. I have had this issue on multiple USB drives ( okay just 2 different drives have been tested ).
What next--fire up Process Monitor and monitor the system (specifically LR) to see if it reports any file open for write access when this occurs. So, far I have not had process monitor actually running when it occurs--one of these days.

Where do RAW image file go when importing images into iPhoto?

I've imported images from my camera card into iPhoto but I want to have access to the RAW files format. I was given the option of erasing the data from the card after import but luckily I opted to not erase because I can't seem to find the RAW images on the computer. Does iPhoto not import RAW image files? I want the RAW file format for obvious reasons.

By default all imported photos are copied into the iPhoto library. To edit them in an external editor check the box in the iPhoto preferences to use RAW with external editors or export the photo with kind = original
LN

Losing quality when bringing photos into timeline?

I am having a major problem with a stop motion project that I am working on. I have imported a folder worth of high quality photos into Final Cut, and when the photos are opened in the Viewer window, the photos appear to be very high quality, as they should. However, when they are put in the timeline, there's a very noticeable loss in quality, and they are also cropped slightly. I have gone through quite a few Sequence Presets, and none of them seem to change the appearance in the slightest. I have invested quite a bit of time in this project so far. Please help!

polamalu wrote:
I have no doubt I will lose quality along the way. I am also confident that I can preserve enough quality that your average viewer will not notice much of a difference in quality if at all. Certainly in motion the photos will not look the same, but even when the stills are frozen on the canvas the quality is poor. What settings will provide the best quality for the final product? I will not be able to use blue ray.
You seem to be thinking the computer or the software must be at fault. Your images are undergoing a reduction in quality that amounts to entire order of magnitude, a factor of 10. You will never put pack what is being lost or be able to create an illusion of fidelity. When you go to the Web, as you indicate later in the thread, your images will be reduced in quality and pixel density by another order of magnitude,70-90% of the already reduced information will be discarded in the form of averaging and reduction of the tonal range to web-safe CLUT.
bogiesan

Losing data when importing excel into an array

Hi,
I have been writing some code that imports data from an excel .xlsx worksheet file containing 890 columns and 150 rows.
When I set the VI to import 702 columns everything works fine. When I try to import 703 columns I get no data in my array. The VI continues to run without any errors just gives me no results as there is no data in the initial array.
Can anyone tell me if there is a setting somewhere Im missing or explain why this is happening as I have read that there should be no limit to the amount of columns you have as long as you have less than 2^32 elements which I am well below. I am using a Labview 2009 and a PC with windows7 64bit and 4G RAM so there should be no problem with PC resources.
Thanks,
Ray.

Hi Ray,
702 is the limit when you use just 2 chars for the column name: "A" to "ZZ" allows for 702 columns.
Probably a subVI somewhere deep in your Excel loading routine is limited for that naming scheme (or is only aware of older Excel versions)...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Images lose quality when imported into Pages

Hi,
when I import images into Pages, they lose quality. They are normal jpg files.
After the import they look a bit fuzzy. I dunno why...
thanks

In the Inspector "Measures" there is a button allowing us to reset to the original size.
Of course, the picture will be smaller than the blurred one
or
will be too large and parts will be hidden.
Yvan KOENIG (from FRANCE mardi 30 juin 2009 12:12:46)

Importing Images into IDVD for Slidshow

I am at a loss as to what is the best image size, resolution size, etc. when it comes to importing images into IDVD. I usually size my prints
4 x 6 @ 300 dpi.. This looks fine in the slideshow preview. After I burn the dvd and view it, the images lose quality, etc..
Any help would be appreciated

What you're creating in iPhoto is a movie file that will get cut off in iDVD because of the TV over scan issue. Only stills imported and assembled into a slideshow in iDVD can be scaled to avoid the over scan.
So to get what you want you'll have to import the stills into iDVD from iPhoto and create the slideshow there.
If you have Quicktime Pro you can mask the QT movie with a black mask and cause the iPhoto QT movie to be scaled to the TV safe area. The steps are below. You'll have to experiment with the final sizes to get it exact:
Masking Movies to the TV Safe Area for iDVD
The mask should be 640 x 480 pixels and the movie at approx. 580 x 386 (I arrived at this figure by making a snapshot of the TV save area of an iDVD project with Snapz). You can set this size after you’ve joined it with the mask movie with Quicktime Player Pro.
Import the black mask jpg file into iMovie and and export it as a .mov file at the same length as your movie (there may be a way to not have to create a specific length mask for each movie but I haven't found it. If the times do not match the movie file will be synced to the length of the mask movie).
Open the mask movie in QT Player Pro and then open your regular movie and make it the front window of the two. Now you'll need to run a QT Player AppleScript titled "Merge Movie 1 into Movie 2". You can get it from this Apple site: Quicktime Player Scripts.
Then run the script. You can then run the merged movie to check it out. Your movie will be located in the upper lefthand corner of the window when played.
When you open the Movie Properties window from the Window menu for the combined file you’ll see the following:
Video Track 1: the black mask
Video Track 2 : you movie file
Tween track: Have no idea what this is.
Sound track: self explanaotry
Black mask.
To set the size of your movie to the correct size select it in the Properties window and click on Visual Settings pane. Then enter 580 in the first field and hit enter. With the Preserve Aspect Ration box checked the other size will automatically be set.
To center the video track in the center of the mask select the Video Track 2 item and plug in a offset of about: 70 & 45. You'll probably have to play with that to fine tune the centering. Doing the math and subtracting the movie dimensions from the mask dimensions and dividing by two just didn't get it perfectly centered bit with a little eyeballing and trial and error it got there.
Now save as a new self contained movie after checking the High Quality box at the bottom right.
You can now import it into iDVD for preview and burning. One drawback is that you can't invoke the TV save area for a movie in iDVD to check it out. But you can mark it on the monitor screen while viewing a menu or slideshow and then play the movie to see how close you came. I found that the size was still a little under the TV safe area when burned and played on my TV. It may be the difference in normal CRT screens and flat screens, etc.

HT1473 When importing CDs into i-tunes should the artwork be there automatically. If not how do I get artwork to show in i-tunes and on my ipod. I had artwork with a PC but now I have a mac artwork does not appear.

When importing CDs into i-tunes should the artwork be there automatically. If not how do I get artwork to show in i-tunes and on my ipod. I had artwork with a PC but now I have a mac artwork does not appear.

I don't use iTunes's "fetch artwork", so I'm not 100% sure, but unless you are signed in to your iTunes account, artwork is not automatic. Even then, iTunes doesn't always find it.
You can copy-and-paste artwork from the inernet, either Amazon or Google. I use 300x300 pixel images.
For the future, if you have iTunes questions, you might be better off posting them in the iTunes for Mac forum, this is iTunes for Windows. In this situation, it doesn't make any difference, but next time maybe it will.

Backup copy filenames when importing images

When making a backup copy while importing images into Lightroom3 the backup copy is keeping its original camera raw file name instead of the new file name I am giving to the images I am importing. This just started happening--up until today the backup copies took the new file names. I suspect Operator Error (as usual) but I honestly do not recall having changed any settings or preferences and can't find a place to do so regarding this problem. What's up?

jim in chicago wrote:
But this problem just cropped up yesterday--I've been importing raw files as DNG's in LR3 for weeks with no issues. Is it possible this could be an intermittent thing?
I can reproduce it all the time. I don't know whether there are any special circumstances that lead to it, but I cannot import a DNG into LR3.2 with a rename and have the 2nd copy carry the same base name as the renamed DNG.
Beat Gossweiler
Switzerland

Losing quality in my images during editing

Im using premiere elements 12 its my first time using any adobe editing software. I bought it because I was losing quality in my images and video while making videos on my basic movie maker that came with my laptop. I spent over 100 dollars on elements and im getting the same results. do I need to tweek my project settings? I want to upload this video online will it go back to normal once uploaded? any tips would be appreciated!

You don't say if you are working on a high-def or a standard def (DVD) project, but do remember that Premiere Elements is a video editor, not a slideshow creator. So anything you put into it is going to come out at video resolution -- 720x480 pixels for standard def or DVD video or 1920x1080 for high-def or BluRay video. That's likely a big step down from your original photo resolution, since even 5 or 10 megapixel camera is shooting many times that resolution.
This article explains in greater detail the difference between photo and video resolution.
http://forums.adobe.com/thread/1187937?tstart=0
Where do you plan to display your slideshow? If on a TV, Premiere Elements' resolution is just fine. (Assuming you've got a BluRay workflow for your HDTV, etc.)
If you're looking for a higher resolution slideshow creator for, say, display on your computer, you may want to consider a dedicated slideshow creator like Pro Show Gold.

When importing photos into LR, the year is incorrect. How to fix?

When I first created my Lightroom catalog, each new folder would fall under 2012, and within that folder would be the date, so for New Year's Eve "2012-12-31". Now that it is 2013, when I import photos into my 2013 folder, Lightroom instantly tries to create a subfolder of 2012 and another subfolder in that with today's date. I can't seem to get Lightroom to stop doing this. See the image below to see what I mean.
I'd like it to just put today's importing images into a subfolder under the 2013 folder, called "2013-01-25". It still wants to create this 2012 folder. Sorry if I am not using the correct wording but this is what is happening so everything shot in 2013 keeps getting put into a new 2012 folder each time.
As you can see I want the subfolders to be organized and Lightroom already has the date format correct. Please help me with this.
Thank you very much.
I am running Lightroom 4.3 on a 13" Macbook Air with Mac OSX 10.8.2, 1.8 GHz Intel Core i5, 8 GB 1600 MHz DDR3 memory, with RAW photos from a Canon EOS 6D.

As far as iOS is concerned naming or labeling your photos is pointless since it's a "visual and tactile" device where you touch or swipe what you see or a folder opens to show you it's entire contents. IPad and iPhone was never intended to search for a picture as such like you would on your desktop or laptop.

Flash cs5 keeps crashing when importing images.

Flash cs5 keeps crashing when importing images onto stage. I plan on tracing a drawing I made. They aren't that big so I don't know why cs5 crashes. Any ideas how to fix that? Thanks
I'm using windows 7- 64 bit.
Quard processor and 8 gb of ram
Here is the error I recieve:
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Flash.exe
Application Version:    11.0.0.485
Application Timestamp:    4badda9d
Fault Module Name:    ntdll.dll
Fault Module Version:    6.1.7600.16385
Fault Module Timestamp:    4a5bdb3b
Exception Code:    c0150010
Exception Offset:    000845bb
OS Version:    6.1.7600.2.0.0.768.3
Locale ID:    1033
Additional Information 1:    2865
Additional Information 2:    2865b1bb537c4d5e61b79207bc968f0a
Additional Information 3:    ddf9
Additional Information 4:    ddf98ab5688195f8b48f91f047120c5a
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

I got the same problem. I tried to import into Flash cs3, cs4, cs5 - constant error in each application.
But seems I've found the reason why this happened in my case.
I just deleted the installed system video codecs (divx, xvid, third-party codecs).
I do not see a direct connection with the import objects into flash. But fact, immediately after the removal of codecs it has to work.
I suspect that the reason could be a third-party codec that is associated with playing QuickTime. Maybe.
Also if it does not help you this way, I used a temporary solution.
Open the psd in Adobe Ilustrator, copy images to clipboard, paste it into flash.
In my case the images are not displayed on the screen after insert, but put into the library.
Don't touch objects, just save the file, close the Flash.
Launch Flash and open saved file. In my case in the first run was an error.
Close the application and open it with file again.
The second time the error was not followed, the images were within the document 8-)
This option made it possible to work until the issue is not solved completely (adobe, wake up!).
win7 64, cs5 (cs3, cs4 had the same issue)
Perhaps it can be useful for someone.
thx
Sorry for my English.

When importing Raw into A3, in what format is the picture displayed? Jpeg or tiff.

When importing Raw into A3, in what format is the picture displayed on the screen? Jpeg or Tiff ?

None of the comments you have gotten are particularly useful. The display is independent of format of the file. It's rendering is of the full pixels in the image file that you have imported, modified by any adjustments you have made, or not if you ask to see the Master.
Even if your Master was imported as a JPEG, as seen on the screen it would have been decompressed, and you would see all the pixels (that the screen is capable of). However, a JPEG may have lost some detail in the compression, but when decompressed has the same number of pixels as the equivalent uncompressed photo format -- but some of them may result from interpolation, and not be the original.
Ernie

Importing images into projects

can any1 please tell me how to import images into my netbeans IDE projects?this should be such that the jar file that is created displays them correctly- i am having this said problem with .jar files.
plz help!!

i use a function createImageIcon(ImageIcon icon) wfor which i provide a definition.
the definition is as given in the java tutorial as follows
protected static ImageIcon createImageIcon(String path)
java.net.URL imgURL = LabelDemo.class.getResource(path);
if (imgURL != null) {
return new ImageIcon(imgURL, description);
} else {
System.err.println("Couldn't find file: " + path);
return null;
the program executes perfectly from the IDE when i use the run finction of F6 key. I use netbeans IDE. the images are kept in a folder named images in the 'src' folder of the project. this folder is used to store source files by the IDE. The main thing is i put the images in such a place that the program executes perfectly without errors from the IDE. using the IDE which shows the contents of a .jar file, i verified that the images are indeedd present in the JAR file. however i still continue to get the same error. infact after add ing the images folder and running a 'clean and build' operation , the only difference is that the jar file, which still doesnt display images on buttons, labels etc has increased in size confirming tht the images have been added- i also verified this from the command line.
but the same problem persists.

Problems losing quality when going from develop module to library module ?? anyone have a fix

Problems losing quality when going to library module from develop module. Sharpness and color quality decrease

This is normal. There will be a difference as you are comparing Library Previews with the image in Develop which accesses the original file, although the difference is usually slight. Real results need to be judged from exporting after selecting the output sharpening e.g. for glossy paper, if printing or screen sharpening for web images or emailing.
The idea with sharpening is to apply capture sharpening so that the image in Develop looks just sharp but not over sharp. Lightroom then uses the correct algorithm for output sharpening based upon image size and quality settings etc.

I am losing quality when importing images into ps touch?

Similar Messages

Maybe you are looking for