I am making an iMovie trailer on my iPad 3(updated) and I recorded a few clips on my iPad Camera but they are not being detected on the iMovie Videos section. How can I make them show up?
I am making an iMovie Trailer on my iPad 3 (updated) and I recorded a few clips using my iPad Camera but they are not being detected on the iMovie Videos scetion. How can I make them appear so I can use them in my trailer?
Hi Stuck-in-NY,
If you are looking to transfer your purchases to your computer, you may find the following article helpful:
Apple Support: Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Regards,
- Brenden
Similar Messages
-
I am loading pictures in the photo stream folder but theya er not being uploaded to the cloud. How do I "force" the upload from the PC to the cloud? I have followed the instructions and enabled the photo stream with the correct folder on the PC...
Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database followed by Option #1 if necessary.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
When i plug my SD card in my MAC it doesn't show my videos, only pictures. How can i make them show up?
The following may help:
Windows: http://support.apple.com/kb/TS1538
Mac: http://support.apple.com/kb/TS1591 -
I've got a G5, OS 10.5, and an IBook OS 10.4. Both can reach the internet wirelesly.
How can I make them aware of each other, so they can exchange files? Both have network
icons in the systems peferences, but I can't see how to hook them up.That got me closer, but I'm not quite there yet. On each ofthe two computers I've allowed all users File Sharing and Remote Management. Each computer has an address 192.168.1.2 (or 4). When I enter those addresses into "connect to server" the reponse is either 'drop box' or 'public folder'. So it seems that only very basic sharing is allowed. I have'nt set up a public folder on either one.
-
Hello, I bought a song on iTunes that has a music video to it, but I don't want the song to play the music video. How can I make it so the music video isn't played?
Hello, iBillyxD.
Thank you for the question. The best way to avoid this behavior would be to delete the music video from your library. You can always download it again free by accessing your previous purchases. To delete and item in your iTunes library, select the item and hit delete on your keyboard.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Cheers,
Jason H. -
I'm using Adobe Proto on an iPad. I created one page and successfully viewed it in the Creative Cloud. Then I duplicated that 1st page so I could work on the next page in that project. I made some changes to the 2nd page and then synced the project with the Creative Cloud again.
Once I try to view the 2nd page in the Creative Cloud, it's still an exact copy of the 1st page. In other words, my changes on the 2nd page don't show up. I've tried synching the project many times and I get the same result. Tried opening the project from another browser, same result.
My changes to a duplicated page are not syncing up in the Creative Cloud. How can I fix this?
Thank you.Yes, I'm 99% certain the project is being synced. If I duplicate more than the one page so that I end up with more than 2 pages, I still see every single page that I duplicated and made changes as the initial version of the page.
I duplicated that 1st page again so that I have 3 pages. I made changes to the 3rd one and I'm still not seeing those changes when I look at the page in Creative Cloud. I see the new, 3rd page, so that should mean the project is being synced, correct? -
I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?
what happened to the initially downloaded files ? did you make a backup ? do you use time machine ?
-
I am playing a game called temple run on my phone.But my achievements are not being uploaded to my Game Center account.How can i solve this issue?
contact the developer?
-
I have some expensive plug-ins which are not being recognised by the new Logic. Where should I install them ?
I am using Mavericks OS, and I am considering transfering my choiceof DAW to Protools.
YoursdisillusionedbyLogicHi
LPX only supports 64bit Audio Unit plugins. You probably need to get the latest updates for all of your plugs.
Some plugs are not currently available as 64bit versions: you may want to try
http://www.soundradix.com/products/32-lives
CCT -
Quicktime keeps wanting to upgrade, but it will not finish becasue it cannot find the file quicktime.msi. The file is in the folder where it thinks it is. I have tried to uninstall and reinstall, but because it cannot find the file it stops. I have tried to run Quicktime but it says it is not there. How can I remove it so I can install it again.
It appears it is fixed. FYI. I went to Major Geeks and it said:
Project has been abandoned. You can now use Microsoft FixIt for this problem.
Read more at http://majorgeeks.com/download.php?det=4459#csPejWlRIRpo3bpv.99
Thank You for your help -
Not going with computers. Trying to figure out how to save Ai RAW file with colors/fonts etc. Currently saves, but does not have colors and font information.
When you say "Colors/Fonts" are not saved, I'm not sure what you mean. How have you determined they were not saved?
Also, not sure what a "RAW" AI file is. I assume you mean simply a native format .ai file.
.ai will save all font and color information. It does not "embed" fonts, but it saves what fonts were used and will call the correct fonts when reopened (assuming fonts are available on the system).
CC 2014 also has a "Package" feature that will collect assets (fonts and images) into a central folder for easy distribution. -
Having problems with my iPad after it fell of the bed. When I turn it on there is a red backlight, then the screen comes on. Even then the page does not look right. Images are distorted and there are patches of red in the images. What does this mean? Can the problem be rectified?
I would take it to the Apple store but some people have been having luck holding their iPad upside down and smacking it on it's back. Be careful, good luck.
-
Tech support seemed to understand the question but had no answer. Why would an album with only one artist show the artist but an album with multiple artist not show any of them. The album art show various in iTunes. That makes sense but on my iPod I would expect to see all artists.
Wish I did. I tried the group function but that didn't help in iTunes. The search function is the best I came up with. I can answer the question do you have susch and such artist. But I can't browse for an artist I don't remember exactly or have misspelled. Fortunately I don't think I've bought anything from iTunes that i already had. If you can't see an artist it's possible you think you don't have something you actually do have. Sorry, still hoping for a better work around or better yet a fix.
-
I recently updated my mid-2010 Macbook Pro 15 inch to 10.10.3 Yosemite and I am now using the new Photos app. My Photostream shows missing thumbnails for more of the recent photos, I let it sit for an hour and they still don't show. Any tips to make the thumbnails show quickly? I have tried disabling photostream and reactivating it which didn't work. The thumbnails do eventually show only if I view each specific photo, but it would take forever to select each one to make the thumbnail show
Hi,
Thanks for that tip and I got as far as that as well with Apple Support but for me the subsequent syncing doesn't work.
I have just returned from another visit at the Apple Store where their top level Genius (if such a thing exists) wanted to see it for himself. Rather worryingly, neither he nor Apple head office has an answer for why this isn't working.
To summarise, I connect my iPhone 6 (all up to date) with my MBA/iTunes via USB cable. The sync tab under the iPhone allows me to sync my photos via USB and I get a dropdown menu to chose from iPhoto or Photos Sync. Both libraries in same location but iPhoto works, but Photos says there are 0 pictures and won't sync...
The Apple genius was going to try it himself tonight at home. He has my number and has promised to phone. In the meantime my question remains. For those of you who do not use the Cloud for storing pictures could you please confirm the sync is working for you as described above. Thanks -
Some how all are photos from Iphotos got places on the bookmarks bar. Anyone know how to remove them from here?
What bookmarks bar?
Is this an iPhoto for iOS query?
Maybe you are looking for
-
I have tried restarting my computer, tried uninstalling, tried reinstalling but it always tells me that Firefox is open and running. When I select the task manager, there is no "firefox" under process. I have tried checking to make sure that the "rea
-
Create a dynamic internal table
Hi , Can any one send me some code for creating dynamic internal table My req is like this Input table: OP QUAN DATE 1 2 10/10/2009 2 3 10/10/2009 3 2 11/10/2009 4 1 12/10/2009 Output tabl
-
Batch Rename and Restructure Folders and Pictures within
Hello, I have been messing around with Automator trying to get Automator to batch rename my pictures. It seems that Automator is a little limited in renaming the way I would like to. I would like to rename all of my pictures to have a folder structur
-
Sqlloader with same csv files - 1 fails the other works fine!
Hi, I am using sqlldr to load data from a csv file into a table. The table has 23 columns in it. The last column is nullable. The CSV has got 23 column values for all the records excepting couple of records which have 22 values leaving the last 23rd
-
How to programmatically jump from one topic to another in a compiled CHM file
Hello, I'm working with the trial version of RoboHelp 9.0, trying to evaluate it for my company before we go ahead and purchase it. Basically I'm importing a Word document and then exporting it into a .chm file. I'm using a programing tool to jump fr