I am migrating from my old black MacBook to a new MacBook pro over wifi but why does it take SO Long...?  I have about 400 gig to transfer and it says 80 hours!  Can this be right?  Is there a faster way?  Is there a way to cancel the migration?

I have an old black MacBook (2006) and want to migrate to my new MacBook pro i7. The migration assistant offered me the prospect of migrating via wifi.  Stated at 108 hours to transfer about 400 gig. Now revised down to 85 hours. Why is this so so so long??  Is there a faster way?  What happens if I cancel now.  Is there a way to cancel? As there is no cancel button....
Ay suggestion sighing the next 80 hours very much appreciated.

The 2006 MacBook has firewire. Use a cable like this. Boot the '06 with the T key held down until you see the Firewire icon. Connect the 400 port on the '06 to the 800 port on the i7. Run Migration Assistant. 400 GB will still take a long time, but it will be closer to 8 hours I think.

Similar Messages

  • Why do I get iPhoto not responding after I used migration from my old G4 powerbook to my newer macbook pro?

    why do I get iPhoto not responding after I used migration from my old G4 powerbook to my newer macbook pro?

    why do I get iPhoto not responding after I used migration from my old G4 powerbook to my newer macbook pro?

  • Why does it take so long to access older messages on this site?

    Just curious, but why does it take so long to access the older messages
    (and related responses) on this site?
    When I do a search, the list of results comes up immediately, but when
    I click on an entry to see the full message I run into problems. If
    the entry is relatively new (say less than six months old), the full
    message and related responses displays within seconds, but if it is
    old than that, it can take up to 15 minutes or more to display
    everything.
    I have tried different browser, different operating systems, with and
    without proxies and firewalls, on T1, on DSL, on dial-up, and the same
    thing always happens.
    Anyone know what is causing this, and a way I can fix it?
    Thanks

    Hey that happens to me too....I think they are archived a different way then the new post, so it takes longer to retrieve them.

  • I tried to migrate my files from my old G4 book to my new Macbook Air. It did not work properly and I want to restore the Air to its original settings. How do I do this?

    I tried to migrate my files from my old G4 book to my new Macbook Air. It did not work properly and I want to restore the Air to its original settings. How do I do this?

    You will need to use an external DVD drive to run the disc installer that came you your machine. You can also do it with another Mac using the Remote Install Max OS X app. Finely, if you have access to another computer, you could burn the install image on a USB thumb drive, boot from that, erase the drive and run the installer.  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

  • Why does it take so long for my wireless printer to start printing from my MacBook?

    Why does it take so long for my wireless printer (HP Photosmart C4700) to start printing from my MacBook?
    It seems to take about 3 minutes to spool up printing from any program on my MacBook, but it will start instantly with my iPhone.

    Anyone have any insight on this?

  • Why does it take so long to upload pictures from iphote to AppleTV

    Why does it take so long to upload pictures from iphoto to AppleTV?   It takes hours to see a folder created in iPhoto to finally display on AppleTV.

    Do you mean that you are importing music from an audio CD into iTunes?  If so, the most likely causes of slow speeds are limitations of the CD drive you are using and/or the CD being dirty or damaged. If you turn on error correction within iTunes this can slow down the import process if it is repeatedly re-reading the same data before it gets a repeatable result (though it is a good idea to always have error connection enabled as the alternative is audible errors in the results).  Depending on which system I'm using typical CD reading speeds vary between 5x and 12x (so a nominal 74 min CD imports in 6-15 min).
    Importing a CD has nothing to do with your internet connection (which is only used to look up the song titles, etc. before you start importing).
    However, if you are downloading music from the iTunes store or another internet retailer such as Amazon, I'd expect an album's worth of m4a/mp3 files to download in 1-2 minutes on a typical broadband connection.  If this is what you're doing, and its taking an hour to complete, then there's a problem with the broadband connection itself or with how your PC is set up to use it.

  • TS4223 why does it take SO LONG to transfer a movie form my Mac to Apple TV. It tales like an hour. I cannot stream it in the meantime. Very frustrated.

    why does it take so long to transfer a movie form iMac to apple TV hard dirve. This is crazy. it takes like an hour to move a movie that i rent on itunes on iMac to our apple TV. i am so tired of this i don't know what to do...

    I have the exact same problem. I purchased apple tv several years ago, and every time I go to rent or buy a movie it takes anywhere from 3 to 7 hours to download the movie. There is no spur of the moment "hey lets rent a movie tonight" because I know it will take overnight to complete the download. I've checked my internet speed and it spot on. I've noticed other threads with people having the same problem but no one seems to have a solution.

  • Why does it take so long to download a saved movie from the cloud

    Why does it take so long to download a saved movie from the cloud

    Hi first off if your running  fcp 7 with compressor 3.5 and fcp x and compressor 4 on the same drive you may run into problems
    as you now have a mix up between Qmasters  which caused me lots of problems when i did any back ground Rendering via compressor of FCP-X
    i had to completly remove compressor 3.5 and compressor 4 then put compressor 4 back on again  as the shared rendering out of FCP-X seems to loose the plot with both versions on the same on the same drive there is an app
    Here
    http://www.digitalrebellion.com/fcsremover/
    which you can get allows you to get rid of certain bits of FCS and FCP-X correctly as you may know deleting the app is,nt the whole story as you need to remove the pref etc as well
    but its really clearing out every thing to do with qmaster thats is the thing here thats what causes all the issues
    really you should follow apple install instructions for FCP -X install ( and put it on separate volumes ) and i know they say there is a way to get every thing working on the same drive ...but it did,nt work for me like you i had massive render times and that 3x crash error
    any way
    once i had remove done my remove C3.5 ,C4 and reinstall C4 only it worked straight away from FCP-X using all the cores on my machine
    get some thing like istats or run activity monitor to make sure Fcp-x is using all your cores to render and you can actually see if its doing anything at all instead of waiting 5 hours for an error
    if you want to use multi core in compressor 4 you have to go into the new apple qmaster tab  and setup up a quick cluster etc
    On another note i alway use Optimized media when doing the import as while you editing its back ground render every thing into pro res making it a much nice codec to compress down to H264 which you need for the ATV
    i hope that helps a bit ,some else may have a better solution but worked for me
    thanks
    G

  • What's wrong with this Forum? Why does Adobe take so long to reply to posts?!

    What's wrong with this Forum? Why does Adobe take so long to reply to posts?!
    This is actually "specific" to this Photoshop Forum.
    I typically get responses back from other Adobe forum promptly.
    Chime in.

    The Adobe engineering folks DO duck in here from time to time - and that's a BLESSING!  Please name any other big company where you get to interact with the engineers AT ALL.  I can't.  But I suspect the engineers actually have a lot oof real work to do, and their time here is necessarily limited.
    Your comments are more along the line of "I pay a huge amount, for that I expect better support".  These are very valid comments.  But reality is different from what we may expect, and this forum is not the place to expect Adobe support participation AT ALL.  In fact, the technical support people at Adobe often direct users to come here (something I've always found amusing).
    At the higher level, Adobe may simply not be spending enough on support for literally millions of users.  Is is greed or smart business to try to minimize support cost?  That's up for individuals to decide.
    I suggest you write a snail-mail letter to the Adobe president if you're not getting the support you need.
    -Noel

  • Why does it take so long to download a movie rental from I tunes. I want to then transfer to my Ipad

    Why does it take so long to download a movie rental from itunes. I am doing this to transfer to ipad.This is a question.

    I have noticed this here on several machines in our office, all running Leopard.
    I just did a test and subscribed to the same 16.8MB podcast on a machine running 10.4.11 and another running 10.5.8.
    The Tiger raced straight through and downloaded at a constant rate, taking about 15 seconds.
    The Leopard raced until 1.2MB downloaded and then slowed to a crawl, going up 0.1MB every 10 or 15 seconds.
    Very strange. I've noticed the Leopards were having similar problems doing downloads through the Software Update utility.
    I compared downloading an update from Support Downloads in Safari and there is no problem.
    So (for me) this issue is applying to Leopard rather than Tiger, and only to downloads via SU and ITunes, not regular http downloads through a browser.

  • Why does it take so long to back up whilst im updating from 4.3.5 to 5.0?

    Why does it take so long to back up whilst im updating from 4.3.5 to 5.0?
    its been on for ages and its not even a quarter of the way backed up!

    The Brave New World of AC wireless networking.. where the reality falls far short of the hype.
    Unfortunately in an actual transfer situation, the signal to noise of wireless (RSSI figure drops dramatically), It simply uses AC as a link speed but speed is always renegotiated during an actual file transfer.. to some sustainable level. I suspect that level is not AC wireless but N.
    It does matter if you run older devices.. nothing with a or b or g wireless should be running in your house. Even n wireless may cause issues.. try turning everything else off and see if you get speed lift.
    As far as the time required for a clean up, is this a first backup as they always take a significantly longer time. Once you are doing regular incrementals the time is usually very short.

  • Why does it take so long to receive an email from find my iphone

    Why does it take so long to receive an email from find my iphone

    Well, first off, you do not know where your iPhone is..it could be anywhere and on any network with a
    ghost network to boot.. Go into your local Police Station, tell them your iPhone has been Stolen & give them All the info you have,, then claim on your house insurance.......If your "Find My iPhone" is On and you still cannot trace it...
    What can I say...............

  • Why does it take so long for itunes to sync my iphone? Its been on step 2 for hours

    Why does it take so long for itunes to sync my iphone? Its been on step 2 for hours
    I just got the iphone 4s...I have had two other iphones in the past and they did not take this long to sync. This is my first time connecting it to my computer.

    8 hours later and it is reading "finishing sync" which I believe is past Step 5 and I have no idea when the "finish" will occur and am afraid to disconnect/interrupt the sync. The current version of itunes (11) is installed and syncing Microsoft Outlook (about 400 contacts, calendar, etc) for the first time.  What should I do next besides wait?

  • Why does it take so long to to restore ipod touch from a backup.

    Why does it take so long to restore ipod touch from backup in itunes via usb cable?

    What is you internet speed
    How big is the SSD on the iPod (8GB, 16GB, 32GB, ect.)
    My 8 GB on was restoring for about 5 min.
    Try disconnecting it and see if there is a picture of a USB to iTunes

  • Why does syncing take so long? 2GB is taking 215 hours

    Why does syncing take so long? 2GB is taking 215 hours

    Thats a fair enough comment, but I would have thought that syncing a mere 2GB of data, 215 hours seems a bit ridiculous, especially as it's not explained very well on the Adobe Cloud exactly what syncing is and how it benefits me. My internet connection is BT broadband and my download speed is 10 Mb/s, upload is 0.261 Mb/s crap I know.

Maybe you are looking for

  • OBIEE 11g: Subscribe to Agents through Dashboard page?

    Hi all, I have created a set of agents which would deliver personalized content to subscribing users based on their OBIEE username. The agents work great, however I am stuck at finding a simpler way to allow various users to subscribe to said agents.

  • No Item Catogoty available

    Hie Guyss.... I pricing procedure for Free goods... When I create a sales order it says "No Item Catogory Available (table T184 OR NORM FREE TAN) Can any one help me getting rid of this Error??? Best regards, Lata.

  • ORABPEL-11622   trying to SELECT data from a table oracle express edition

    aulted while invoking operation "bpelq" on provider "bpelq". - <messages> - <input> - <Invoke_query_bpelq_InputVariable> - <part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="bpelqInput_msg"> <bpelqInput xmlns="http://xmlns.oracle.com/p

  • Combo/PopList/or LOV on the web

    I am deploying a forms 5.0 application on the web. I need to present the user with a list of possible selections that is generated from a SQL statement. (eg. create a poplist that is populated with values from a dictionary table) Question 1: Is it po

  • Can I use a LiveType LiveFonts font (Cool) for print?

    Hi, I made a short video in FCP 6 and used LiveType for some moving fonts in the video. I am in the process of making a book with the same subject matter and am stumped. My illustrator wants to use one of the same fonts that I used in LiveType. I do