I am missing starting a new tabpage direct with my startpage

I changed from 3.6 to 4.01
-I now miss a knob for starting a new tabpage direct with my (Google)startpage.
-From an earlier version (2?) I also and still miss the possibility of making a new tabpage with a copy (including history) of the current page.

Similar Messages

I would like to be able to start typing a URL directly (with no need to clear the field first) after opening a new tab with my homepage...

I've just installed the newest desktop version of the Firefox browser because my Opera doesn't feel very well these days. I'm trying to become friends with Firefox, and that's why I've changed the new tab settings in order to have my offline homepage loaded every time I open a new tab. There is an inconvenience — when I press Ctrl+T, the cursor appears at the end of the URL. It means that when I start typing, the letters show in the address bar after the URL of my homepage, so what I need is to clear the field first.
Is there a way to get rid of this? (If it helpes, I'm currently using Windows 7.)
I would appreciate if I could just press Ctrl+T, type a URL, and press Enter when I want to go to a website different from my homepage. Thank you for your replies!

Then you can use (Ctrl+L and) Ctrl+A to select all the text in the location bar or Shift+Home/End.

Help with start up. new iMac 27" with Marericks installed has been giving me trouble with IDs and passwords. More than one account downloaded from older Laptop. Now the computer has the turning wheel in from of gray screen and won't go any further when

I recently started using my desktop iMac 27" and have been having problems since installing Mavericks, not saying that Mavericks is the problem per se. I think I have too many accounts with too many names, with too many Apple IDs and too many passwords, email passwords and Apple ID passwords, and keychain passwords, etc. Can't keep them straight even though I write everything down. The screen has been making me log in and log out with Account name and passwords after everything I've been doing, also confused about Users and Groups and how to sync everything. I finally just "shut down" everything and the screen was black. When I turned the computer on again, the circular gear in the middle just kept turning but nothing happened after that. Then I held the on button in the back until the screen went black again.
What should I do? Is there a way to combine all my accounts into one account with one Apple ID? I should say that I also have trying to use iCloud and it has different IDs and passwords. Also when I try to log in with one account name, I can't enter anything I write,and when I type on the keyboard, nothing appears on the screen, although I can receive emails, I can't send them.
In another account, what I type does appear on the screen, but I think it's an earlier account and doesn't translate aver to the other account. ALTHOUGH i set up iCloud accounts, they don't appear any more.
Very confused. Any Ideas about how I can get the computer to start up again and show a new screen?
Thanks to anyone who has workable suggestions.

If you really believe that your system has been compromised, here's what you do:
Disconnect your Mac from your cable modem;
Back up any documents on your system that are important to you;
Boot your Mac from the system installation disks that came with it (insert the disk, restart your Mac, and hold down the "c" key until you get the "spinning gear" icon);
Choose a language and click the arrow button to continue;
From the Utilities menu, choose Disk Utility;
In Disk Utility, select your computer's hard drive;
Click the "Erase" tab;
Click the "Security Options" button and select to have it overwrite all the data on the hard drive;
Click the "Erase" button and allow it to process;
Once the "erase process has completed (it will take a while), reinstall Mac OS X.
Or, if this is too much for you to accomplish on your own, take your system to an Apple Store and have them help you perform these steps. If your system was indeed compromised, this will remove any such hack. You can then set up a new user account for the computer, reinstall your applications (reinstall only from original disks or downloads from the company making the software) and documents, and reconnect to the Internet.
Note that when you reconnect to the cable modem, you may still get an IP address starting with 198. This is normal with some cable modems and probably not a cause for concern. It will not be an indication that your system is still compromised; that will not be possible if you perform all the above steps.
Regards.

HT1420 Start a new iTunes account with songs in an existing account.

My daughter and I share an iTunes account and have for 5 years. I want to separate her and my songs and establish a separate account for her.
How can I do this without repurchasing all of her songs. She has over 7,000?

You can create a new account for her, but all existing purchases/downloads will remain tied to your existing account, and you can't transfer them to the new account. As long as that account is authorised on the computer's iTunes that she will be syncing any devices to, and those songs are on that computer, then she should be able to continue to use them.

Can I start my new Ipad Mini with a backup of my Ipod touch 5 gen

I would like to play at the same level with my games purchase in the Appstore with my Ipod touch and have the same on my new Ipad mini retina

You can do that, presuming that the iPod all will play on the iPad. Not all apps are universal and scale up or play.
When I set up my iPad I transferred a lot of apps from my iPod.
The key to having them all at the same level is to set your iPad up from the backup of your iPod.

I have iphone 5. I deleted my iCloud account because I started a new apple id with a new email address. I can no longer log into apple id with my new email and pw. How can I get it on without starting all over?

I changed my apple id on my iphone and macbook but now I cannot get my iphone to accept it when I go into icloud after deleting an OLD apple id.

It is not possible to do that.
Allan

I want to get off the plan start a new account but can't contact account owner

Hi,
My brother and I have been on the "NATIONWIDE TLK&TXT SHARE 700" plan and the account owner is a friend of our family.
I have almost fulfilled my two year contract (it will be over in about 1 month) and we would like to upgrade to a new Iphone and put my name as the account owner (none of us had enough credit by the time we got these phones from Verizon, but now we are able to pay our bills and would like to be responsible and keep privacy).
I've noticed that in order to accomplish AoL, curruent account owner needs to call Verizon and authorizes the account transfer, but the problem is, I haven't been able to contact her for a month(she won't answer the phone and no call back has been received...).
So I was thinking I should just give up keeping my number and start a new contract and a plan with my brother.
My question is, as just an account member (not owner or manger), can my brother and I get off the plan without owner's permission? She and I are not on the same plan and she actually gave me some kind of password so that I could manage some stuffs with customer service. I was actually able to cancel my mother's line from the family plan one year ago with that password , but I wonder if I could do the same thing with both my brother's and my lines without owner's permission.
If I can do that, is there any way to keep my numbers when starting a new account without having current account owner involved since I can't reach her?
If I start a new account and a plan with my brother and get the phone with 2-year-contract, rather than just upgrading to an iphone (while keeping my number under the current account owner like now), how much money will I be losing? Would it be a lot?

whatwhywhere wrote:
My question is, as just an account member (not owner or manger), can my brother and I get off the plan without owner's permission? She and I are not on the same plan and she actually gave me some kind of password so that I could manage some stuffs with customer service. I was actually able to cancel my mother's line from the family plan one year ago with that password If you were able to do this, then you must be an account manager
, but I wonder if I could do the same thing with both my brother's and my lines without owner's permission.
If I can do that, is there any way to keep my numbers when starting a new account without having current account owner involved since I can't reach her? If you are an account manager, I would think you should be able to accomplish this. You should call *611 or go into a Verizon store to find out.
If I start a new account and a plan with my brother and get the phone with 2-year-contract, rather than just upgrading to an iphone (while keeping my number under the current account owner like now), how much money will I be losing? Would it be a lot?
If you start a new Family Plan with 2 lines instead of remaining part of a Family Plan with 3(or more) lines, you could end up paying more. Not knowing what your arrangement is, though, we cannot begin to tell you how much more you would be paying.
For example:
700 minute Family Plan with unlimited texting for 2 lines would be $99.98/month + tax for a total of ~$50/person.
700 minute Family Plan with unlimited texting for 3 lines would be $109.97/month + tax for a total of $37/person.
Any add ons such as insurance, data, etc... would of course be extra. You may also have to pay a security deposit in addition if you do not have much of a credit history.

Leaving one Family Plan to start a new one?

Here is my situation:
I am currently in a Family Plan with my parents and brother. I am eligible for my 20-month upgrade this month and plan on upgrading to an iPhone. My fiancee currently has an iPhone with AT&T and her contract is up next July, at which point she would like to switch to Verizon and get on a new Family Plan with me (just the two of us). It is important that we both keep our current phone numbers through all of this.
My question is: if I upgrade now and stay on my parents' Family Plan, will I incur any additional fees for leaving that Family Plan next July and starting a new Family Plan with my fiancee? Is doing this even possible?
Or would the better route be to leave my parents' Family Plan now, starting my own single-line plan, and then next July changing my single-line plan to a Family Plan and adding my fiancee?
I hope this makes sense... I have searched the message boards and support pages and can't seem to find answers to my questions, or anyone else with the same situation.
Thanks,
Dave

dcm229 wrote:
Here is my situation:
I am currently in a Family Plan with my parents and brother. I am eligible for my 20-month upgrade this month and plan on upgrading to an iPhone. My fiancee currently has an iPhone with AT&T and her contract is up next July, at which point she would like to switch to Verizon and get on a new Family Plan with me (just the two of us). It is important that we both keep our current phone numbers through all of this.
My question is: if I upgrade now and stay on my parents' Family Plan, will I incur any additional fees for leaving that Family Plan next July and starting a new Family Plan with my fiancee? Is doing this even possible?
you should not have any fees, but depending on your credit a deposit may be required
Or would the better route be to leave my parents' Family Plan now, starting my own single-line plan, and then next July changing my single-line plan to a Family Plan and adding my fiancee?
its up to you, fianancially speaking, see comments below
I hope this makes sense... I have searched the message boards and support pages and can't seem to find answers to my questions, or anyone else with the same situation.
Thanks,
Dave
in order to keep your number and start your own single line plan you would do an assumption of liability (AOL).
the phone number and contract would become yours.
what can happen, is since the phone is currently in one name nad going to another name you lose your warranty.
so it may be better to do it before you upgrade.

My computor crashed. All my songs in my itunes library were lost. After I restarted my computor, I started a new library with new itune songs. When I tried to download them on my iphone, itunes wanted to get rid of my old songs on my iphone. What can I do

My computor crashed. I lost my music from my itune library. After I restarted my computor to work again, I started a new itune library with new songs. When I tried to download my new songs to my iphone, itunes said it had to erase all my old songs in order to install the new songs. Is there a way to install new songs without getting rid of my old songs?

That is the way the iphone works.
You need to copy everything from your backup copy of your computer.

I have used Bootcamp to install Windows 7 on my new Mac OS X Lion. Now when I start my computer it starts directly with Windows. How do I get back to Mac?

I have used Bootcamp to install Windows 7 on my new Mac OS X Lion. Now, when I start my computer it starts directly with Windows. No way to get back to Mac

I have used Bootcamp to install Windows 7 on my new Mac OS X Lion. Now, when I start my computer it starts directly with Windows. No way to get back to Mac

I have a mid2009 MacBook Pro for which I have been using a USB WD HD for Time Machine. I'd like to get a wireless HD and start a new Time Machine backup for this Mac and retire the 5 year old WD drive. Can I start over?

I have a mid2009 MacBook Pro running Mavericks for which I have been using a USB WD HD for Time Machine. I'd like to get a wireless HD and start a new Time Machine backup for this Mac and retire the 5 year old WD drive. Can I start over?

no archive/ backup is perfect, HD clones can be set to make incremental additions, same as time machine however, though they are more time involved in doing so.
See the + and - of all data backup/ archives below and "spread it around".... or the "dont put your eggs all in one basket" philosophy.
Peace
Data Storage Platforms; their Drawbacks & Advantages
#1. Time Machine / Time Capsule
Drawbacks:
1. Time Machine is not bootable, if your internal drive fails, you cannot access files or boot from TM directly from the dead computer.
2. Time machine is controlled by complex software, and while you can delve into the TM backup database for specific file(s) extraction, this is not ideal or desirable.
3. Time machine can and does have the potential for many error codes in which data corruption can occur and your important backup files may not be saved correctly, at all, or even damaged. This extra link of failure in placing software between your data and its recovery is a point of risk and failure. A HD clone is not subject to these errors.
4. Time machine mirrors your internal HD, in which cases of data corruption, this corruption can immediately spread to the backup as the two are linked. TM is perpetually connected (or often) to your computer, and corruption spread to corruption, without isolation, which TM lacks (usually), migrating errors or corruption is either automatic or extremely easy to unwittingly do.
5. Time Machine does not keep endless copies of changed or deleted data, and you are often not notified when it deletes them; likewise you may accidently delete files off your computer and this accident is mirrored on TM.
6. Restoring from TM is quite time intensive.
7. TM is a backup and not a data archive, and therefore by definition a low-level security of vital/important data.
8. TM working premise is a “black box” backup of OS, APPS, settings, and vital data that nearly 100% of users never verify until an emergency hits or their computers internal SSD or HD that is corrupt or dead and this is an extremely bad working premise on vital data.
9. Given that data created and stored is growing exponentially, the fact that TM operates as a “store-it-all” backup nexus makes TM inherently incapable to easily backup massive amounts of data, nor is doing so a good idea.
10. TM working premise is a backup of a users system and active working data, and NOT massive amounts of static data, yet most users never take this into consideration, making TM a high-risk locus of data “bloat”.
11. In the case of Time Capsule, wifi data storage is a less than ideal premise given possible wireless data corruption.
12. TM like all HD-based data is subject to ferromagnetic and mechanical failure.
13. *Level-1 security of your vital data.
Advantages:
1. TM is very easy to use either in automatic mode or in 1-click backups.
2. TM is a perfect novice level simplex backup single-layer security save against internal HD failure or corruption.
3. TM can easily provide a seamless no-gap policy of active data that is often not easily capable in HD clones or HD archives (only if the user is lazy is making data saves).
#2. HD archives
Drawbacks:
1. Like all HD-based data is subject to ferromagnetic and mechanical failure.
2. Unless the user ritually copies working active data to HD external archives, then there is a time-gap of potential missing data; as such users must be proactive in archiving data that is being worked on or recently saved or created.
Advantages:
1. Fills the gap left in a week or 2-week-old HD clone, as an example.
2. Simplex no-software data storage that is isolated and autonomous from the computer (in most cases).
3. HD archives are the best idealized storage source for storing huge and multi-terabytes of data.
4. Best-idealized 1st platform redundancy for data protection.
5. *Perfect primary tier and level-2 security of your vital data.
#3. HD clones (see below for full advantages / drawbacks)
Drawbacks:
1. HD clones can be incrementally updated to hourly or daily, however this is time consuming and HD clones are, often, a week or more old, in which case data between today and the most fresh HD clone can and would be lost (however this gap is filled by use of HD archives listed above or by a TM backup).
2. Like all HD-based data is subject to ferromagnetic and mechanical failure.
Advantages:
1. HD clones are the best, quickest way to get back to 100% full operation in mere seconds.
2. Once a HD clone is created, the creation software (Carbon Copy Cloner or SuperDuper) is no longer needed whatsoever, and unlike TM, which requires complex software for its operational transference of data, a HD clone is its own bootable entity.
3. HD clones are unconnected and isolated from recent corruption.
4. HD clones allow a “portable copy” of your computer that you can likewise connect to another same Mac and have all your APPS and data at hand, which is extremely useful.
5. Rather than, as many users do, thinking of a HD clone as a “complimentary backup” to the use of TM, a HD clone is superior to TM both in ease of returning to 100% quickly, and its autonomous nature; while each has its place, TM can and does fill the gap in, say, a 2 week old clone. As an analogy, the HD clone itself is the brick wall of protection, whereas TM can be thought of as the mortar, which will fill any cracks in data on a week, 2-week, or 1-month old HD clone.
6. Best-idealized 2nd platform redundancy for data protection, and 1st level for system restore of your computers internal HD. (Time machine being 2nd level for system restore of the computer’s internal HD).
7. *Level-2 security of your vital data.
HD cloning software options:
1. SuperDuper HD cloning software APP (free)
2. Carbon Copy Cloner APP (will copy the recovery partition as well)
3. Disk utility HD bootable clone.
#4. Online archives
Drawbacks:
1. Subject to server failure or due to non-payment of your hosting account, it can be suspended.
2. Subject, due to lack of security on your part, to being attacked and hacked/erased.
Advantages:
1. In case of house fire, etc. your data is safe.
2. In travels, and propagating files to friends and likewise, a mere link by email is all that is needed and no large media needs to be sent across the net.
3. Online archives are the perfect and best-idealized 3rd platform redundancy for data protection.
4. Supremely useful in data isolation from backups and local archives in being online and offsite for long-distance security in isolation.
5. *Level-1.5 security of your vital data.
#5. DVD professional archival media
Drawbacks:
1. DVD single-layer disks are limited to 4.7Gigabytes of data.
2. DVD media are, given rough handling, prone to scratches and light-degradation if not stored correctly.
Advantages:
1. Archival DVD professional blank media is rated for in excess of 100+ years.
2. DVD is not subject to mechanical breakdown.
3. DVD archival media is not subject to ferromagnetic degradation.
4. DVD archival media correctly sleeved and stored is currently a supreme storage method of archiving vital data.
5. DVD media is once written and therefore free of data corruption if the write is correct.
6. DVD media is the perfect ideal for “freezing” and isolating old copies of data for reference in case newer generations of data become corrupted and an older copy is needed to revert to.
7. Best-idealized 4th platform redundancy for data protection.
8. *Level-3 (highest) security of your vital data.
[*Level-4 data security under development as once-written metallic plates and synthetic sapphire and likewise ultra-long-term data storage]
#6. Cloud based storage
Drawbacks:
1. Cloud storage can only be quasi-possessed.
2. No genuine true security and privacy of data.
3. Should never be considered for vital data storage or especially long-term.
4. *Level-0 security of your vital data.
Advantages:
1. Quick, easy and cheap storage location for simplex files for transfer to keep on hand and yet off the computer.
2. Easy source for small-file data sharing.

Missing start boundary exception, caused by an empty Part, how to handle?

Hello,
i wrote an application that automatically handles mails from laboratories. The only essential part of the mail is the attachment, where chemical analyses are submitted (from permitted addresses, recognized by whitelist and fileheader of the attachment). Other ways to submit data weren't allowed.
Currently a mail was received that can't be parsed. It's from a laboratory, that
use its provider's (a german internet suplier named Arcor) webmail, a browser-based mailing portal. It always worked fine, because they wrote some greetings. But this time they sent a blank message. The result is following structure of the mail:
MIME-Version: 1.0
Content-Type: multipart/mixed;
boundary="----=_Part_50112_10709369.1203586767396"
//Some X-Flags
------=_Part_50112_10709369.1203586767396
Content-Type: multipart/alternative;
boundary="*----=_Part_50111_24141780.1203586767396*"
------=_Part_50111_24141780.1203586767396--
------=_Part_50112_10709369.1203586767396
Content-Type: application/octet-stream
Content-Transfer-Encoding: base64
Content-Disposition: attachment; filename=somefile.bin
ABCDEF.... //Some binary data
------=_Part_50112_10709369.1203586767396--
It seems the webmailer creates an empty mailpart and only writes the end boundary (Line: ------=_Part_50111_24141780.1203586767396--).
I know, the start boundary is really missing.
I checked it out by getting a mailaccount from Arcor, and it always creates this structure when sending a message without a text. By the way, the Message-ID (header) generated from Arcor's server seems to be from javamail. (.....1234.567890.....JavaMail.ngmail@....).
I don't know how many mailclients create "empty" parts, but impossible is nothing (e.g. other or future webmailer services).
But how to handle?
The error occures when calling MimeMultipart.getCount(), which causes to parse the mail if not parsed. All actions, which cause the mail to be parsed, will end in this exception (for this mail).
I looked at the javamail source and found out, that the line of the empty part is not recognized as a boundary, because of its ending delimiters:
if (line.equals(boundary))
break;
So the boundary is added to the preamble. It goes on with reading lines from the stream, until line == null.
if (line == null)
throw new MessagingException("Missing start boundary");
Because there is no test, if the line matches the end boundary, it's not recognized. Wouldn't it be better in this case, to add an empty bodypart and set a variable to false (e.g. complete) instead of throwing an exception? Because MimeMultipart.parse() is called by other methods, like getCount, getBodyPart and writeTo, I can't nearly do anything automatically with the mail. How should i walk through the bodyparts and fetch the parts I'm interested in?
Subclassing seems to be difficult to me:
Object content = message.getContent();
//javax.mail.Message, won't return a subclassed multipart
if (content instanceof Multipart) {
//recursive method!
handleMultipart((Multipart) content); //collecting parts from multipart
Of course, I could ask the laboratory: "please send me a greeting!" ;-)
Greetings,
cliff

Interesting.
Yes, it's probably a bug that JavaMail allows you to
create a multipart with no body parts, since the
MIME specification doesn't allow that. Still, the
webmail application should be fixed so that it doesn't
try to do that, at least including an empty plain text
body part.
Please contact the webmail provider and tell them of
this bug in their application.
I'll also look into making JavaMail cope with these
broken messages more gracefully. Contact me
at [email protected] and I'll let you know when
I have a version ready to test.

How can I restore a back up of an old iphone to a new iphone (after I accidentally started a "new" iphone name?

how can I restore a back up of an old iphone to a new iphone (after I accidentally started a "new" iphone name?

Unfortunately you do not have direct access to iOS backs in iCloud.
I am not sure what you mean by:
It's locked with an enterprise (third party code)
Do you mean it is a corporate device and managed by Mobile Device Management software?
If so the IT department can reset the passcode.
Other than that, there is no third party iOS app that can lock the device at that level unless it is jailbroken and then no one here can help you.

Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space? Only one Sparse Bundle, same name.

Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space? There is only one sparse bundle but when I enter time machine I don't see my historic backups. I use a synology DS212 for my time machine. Started a new backup which is 218gb but it says 618 gb is occupied therefore it looks like 2 or 3 backups are still on the disk. Before my NAS issues the last backup was in 2014. As you can see there is a second sparse bundle from 2012. Not sure what that is.

This is an old message now, but what happened to me similarly was:
I had a major computer crash and through complicated pathways ended up reinstalling (Mavericks) as a new user (long story).
At least I had good Time Machine backups on an NAS drive (Synology DS212j), or so I thought - when I started Time Machine up again, the old backup file was gone, replaced by a new one using my "new computer" name. The old file was gone both by directly mounting the NAS drive and by clicking "Enter Time Machine".
It's like I had {OldShareName}.sparsebundle and then it was replaced by {NewShareName}.sparsebundle, all of the old info vanished.
(I have spent a week finding old files elsewhere and have completed a satisfactory self-restore. It pays to "archive" [my own variation of] as well as "back-up".)
My belief is that if this were a wired-netword-drive, e.g. plugged right into my iMac with a USB cable, then the old file would have remained.
But this is an NAS drive, connected directly to my Airport wireless router, and I don't know the significance of the fact that it stores its Time Machine backups as "sparsebundle" files rather than simply as plain(er) files.
As usual when things get complicated with computers (not just Apple computers) there was never a warning message. Something like "YOU'RE ABOUT TO DELETE A TIME MACHINE BACK-UP FILE!!!" would have made my life a lot simpler.
BTW, I did try a "restore from Time Machine" option the first thing I had my "new computer" (old hardware, 2009 iMac) up and running, using Migration Assistant, and it ran for many hours and then failed in the wee hours - what that has to do with anything I'm not sure.
I'm not sure that I have a question about this other than "why do these things happen to me?", but it's a warning. Apart from that I've been very happy with the stability and reliability (but not the cost or set-up complexity) of NAS vs. directly-cabled external drives.
Charles

How can I solve a "org.jvnet.mimepull.MIMEParsingException: Missing start boundary" when using "Page Attachments to Disk"?

I have built a streaming MTOM enabled web service for downloading large files. I also built a client that uses that service (with MTOM and streaming feature). Everything works, when the client calls the web service directly.
Then I have set up the OSB, so that I can call the service through the OSB. I have build a Business Service and a Proxy Service. For the Business Service, I use "XOP/MTOM Enabled", "Include Binary Data By Reference" and "Page Attachments to Disk" to prevent the OSB from loading the whole data into memory.
If I do not use the "Page Attachments to Disk" option, the download works, but I assume everything is loaded into the OSB memory.
When I use the "Page Attachments to Disk" option, I receive the following error message
Exception in thread "main" com.sun.xml.ws.fault.ServerSOAPFaultException: Client received SOAP Fault from server: Couldn't create SOAP message due to exception: org.jvnet.mimepull.MIMEParsingException: Missing start boundary Please see the server log to find more detail regarding exact cause of the failure.
    at com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:193)
    at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:131)
    at com.sun.xml.ws.client.sei.StubHandler.readResponse(StubHandler.java:253)
    at com.sun.xml.ws.db.DatabindingImpl.deserializeResponse(DatabindingImpl.java:203)
    at com.sun.xml.ws.db.DatabindingImpl.deserializeResponse(DatabindingImpl.java:290)
    at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:119)
    at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:92)
    at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:161)
    at com.sun.proxy.$Proxy38.fileDownload(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:606)
    at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:87)
    at com.sun.proxy.$Proxy39.fileDownload(Unknown Source)
    at largefiletransfer_osb_client.MtomClientDownload.main(MtomClientDownload.java:59)
Why do I get this exception and how can I solve the issue?
Additional Infos:
OS: Windows 7 64bit
Tool: JDeveloper BPM Suite 12.1.3.0.0
WebService: HTTP + SOAP + MTOM + Streaming

I have built a streaming MTOM enabled web service for downloading large files. I also built a client that uses that service (with MTOM and streaming feature). Everything works, when the client calls the web service directly.
Then I have set up the OSB, so that I can call the service through the OSB. I have build a Business Service and a Proxy Service. For the Business Service, I use "XOP/MTOM Enabled", "Include Binary Data By Reference" and "Page Attachments to Disk" to prevent the OSB from loading the whole data into memory.
If I do not use the "Page Attachments to Disk" option, the download works, but I assume everything is loaded into the OSB memory.
When I use the "Page Attachments to Disk" option, I receive the following error message
Exception in thread "main" com.sun.xml.ws.fault.ServerSOAPFaultException: Client received SOAP Fault from server: Couldn't create SOAP message due to exception: org.jvnet.mimepull.MIMEParsingException: Missing start boundary Please see the server log to find more detail regarding exact cause of the failure.
    at com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:193)
    at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:131)
    at com.sun.xml.ws.client.sei.StubHandler.readResponse(StubHandler.java:253)
    at com.sun.xml.ws.db.DatabindingImpl.deserializeResponse(DatabindingImpl.java:203)
    at com.sun.xml.ws.db.DatabindingImpl.deserializeResponse(DatabindingImpl.java:290)
    at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:119)
    at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:92)
    at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:161)
    at com.sun.proxy.$Proxy38.fileDownload(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    at java.lang.reflect.Method.invoke(Method.java:606)
    at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:87)
    at com.sun.proxy.$Proxy39.fileDownload(Unknown Source)
    at largefiletransfer_osb_client.MtomClientDownload.main(MtomClientDownload.java:59)
Why do I get this exception and how can I solve the issue?
Additional Infos:
OS: Windows 7 64bit
Tool: JDeveloper BPM Suite 12.1.3.0.0
WebService: HTTP + SOAP + MTOM + Streaming

I am missing starting a new tabpage direct with my startpage

Similar Messages

Maybe you are looking for