I am moving to the U.S. for a year, from the UK. Should I get an iPhone here (UK) or wait until I'm there?

I am moving to the U.S. for a year, after which I will be returning permenantly to the UK. I am going to buy an iPhone, but am unsure whether it would be better to buy it here, or when I get over there?
Hopefully the phone will last for more than a year!

If you do buy before you go do not worry about your warrenty as Apple should still support iy as all you need to prove is that you bought it while you were a resident in the UK.  Why companies do not like to support other contry warrenties as they wany to stop grey imprts.  In your case you are a UK citezen going to the US for a year and they should support it.  Though like most users you probably will not need this option. 
Buying before you go means that when you return to the UK you will still be able to use your phone here in the UK.  The US carries like 2 + year  contracts and tend to be more expensive than UK contracts.  Not sure if they have as many deals as we do have in the UK.

Similar Messages

  • Can I run the currency translation for multiple years at the same time?

    Dear Friends,
    I set up currency translation on our BPC NW 7.0 system and it is working fine ONLY if I run it for any one year at a time. But if I select multiple years in the data package (FX Restatment) selection it only calculates for the first year in that selection.
    say if I run the data package for years: 2009, 2010, 2011, 2012, it only performs currency translation for the year 2009.
    Can I run the currency translation for multiple years at the same time ?
    Note: The year is determined from the YEAR property of the "Time" dimension
    appreciate any inputs,
    thanks

    You can run currency translation for multiple years.
    I think the problem it is actually related to how you are sending the parameter to currency translation script.
    Just review the script logic log and you will see with what parameters was called currency translation FXTrans.
    My expectation is that actually the script is called just with first year and that's the problem.
    Log of script logic you can find it into:
    C:\BPC|DATA\Webfolder\YourAppset\YourApplication\Private Publications\Users used to run logic\Temp
    Regards
    Sorin Radulescu

  • Where can I find the serial number for LOGIC PRO from the AppStore

    Please help me:
    Where can I find the serial number for LOGIC PRO from the AppStore?
    I bought and downloaded the application, now it asks me for the serial number but I didn't not receive it or can find it.

    My understanding is that if it was purchased throught the App Store, then there is no requirement for a serial number. At which point does it ask you for the serial?

  • Finding the related field for "Leave Type"  from the BI content in HR modul

    Hi good after-noon!!
    Can any one help me out in finding the related field for "Leave Type"  from the BI content in HR module?
    Regards,
    Suman.

    Hi Suman ,
       U can get the information in KTART field in PA2006 table in SAP. This field can take values like annual leave type, long service leave, study leave etc....
    Regards
    vamsi

  • Just put my i-tunes library on a 2nd hard drive, how do I easily change the location where the program looks for current songs from the C:/ drive to the new drive without going thru each song individually in the "get info" tab

    I just installed a new hard drive and transfered my i-tunes library to the new drive.  How can I make a bulk change of the location the program looks for the current songs.  I know you can do it song by song from the "get info" tab but I need to do it for all 4500 songs.  I have already changed the location that new files are stored to the new hard drive.

    The pop-up lets you connect to the library file, iTunes Library.itl, on the external drive. This will, in turn, automatically update the preference for the iTunes Media folder to be the iTunes Media or iTunes Music folder inside the iTunes folder on the external drive and it will update the locations of all the content inside the media folder so that it uses the version on the external drive.
    This works seamlessly if all iTunes content was inside the iTunes Media (or iTunes Music) folder (which was itself inside the iTunes library folder) before you moved/copied the iTunes folder. For content outside the iTunes Media folder iTunes should remain connected to the original location. These files should be consolidated (before or after the move/copy) and in addition, if available the library should be upgraded to the newer layout which places iPod Games and Mobile Applications inside the media folder instead of the library folder. (File > Library > Organize Library...)
    For split libraries there are methods to rejoin them before moving (preferred) or repairing after the fact (e.g. my script) which I can go into if needed.
    tt2

  • What is the return policy for products purchased from the US iStore?

    Hi. I purchased a product fro  an iStore in New York city (Apple Airport express). Actually required a router and was advised by staff it was a router (it is infact a wifi base station that will plug into an existing router). I'd like to return it/exchange it?

    The AirPort Express is a router.  It is not a modem. If you want the AirPort Express router to be able to connect to the Internet, you will need a separate modem to use with the AirPort Express. Check with your Internet Service Provider to see if they can supply you with a modem, or recommend a modem that you could purchase at a store
    If I plug my telephone cable into it will it act as an ADSL modem?
    No
    Some products, which are called modem/routers or gateways, combine a modem and and a router in one package. If you want a device like this, you should return the AirPort Express for a device of this type.

  • How do I overcome the Failed Downloads for Instant Movies from the Adobe Server?

    I have a Windows 8.1 PC , Premiere Elements ver. 12, and I have a  dedicated DSL for computer only. In my best efforts, even when disabling  McAfee completely, I have had almost 4 days of frustration trying to  download an Instant Movie from the online content server. At times the  DL works, slowly, then it pauses, sometimes the DL reverses the count  and I lose 10mb and it resumes (I have never seen that before). Most  frustrating is when the DL is nearly complete and the message pops up  that I need to check my connection as the download has failed. I have  1.6TB disc space, and no restrictions in place at my end. I tried from 2  of the PCs, both Win 8.1. I have tried at all hours of the day for  traffic on the server, but that doesn't seem to matter. I have attempted the Secret Agent file DL at best 10x.  Is there a  setting I need to change to receive this content, or go to a different  site where I can directly access this content?
    I have purchased Three PE 12 programs for 3 replacement PCs and I need some real direction.
    Thank you, Jerry

    Jerry W B
    There will be those that report Content download of a few minutes. Although we are happy for them, many have found that this is not usually the case. Download of the Premiere Elements 11 and 12 Content download is often a slow process which demands a lot of patience whether the download be "Download Now" or "Download All".  Just two of the factors in this situation are the Internet Speed/Status and the status of the Adobe Server. Many times it is time of the day.
    http://www.atr935.blogspot.com/2013/05/pe11-no-content-disc-content-downloads.html
    http://atr935.blogspot.com/2013/12/pe12-content-download-considerations.html
    I have DSL Service on the east coast of the USA. It is now about 6 pm Saturday February 22, 2014.
    I right clicked the blue ban at the top right corner of the Instant Movie thumbnail for the Secret Agent theme. I selected Download Now to download just that one Instant Movie theme.
    a. The file size was given as 75.8 MB, not 118.7 MB. It took 11 minutes and 19 seconds to download that Instant Movie.
    I checked the download on two different computers, one Windows 7 64 bit and the other Windows 8.1 64 bit. The Instant Movie Secret Agent had a file size of 75.8 MB according to the download pop up in the opened project.
    b. If you are talking days for this download, then I would first check with your Internet provider. There is no other place for these downloads except from within the program. And, when you do get them, I would encourage you to save them as per my blog posts on this topic to avoid having to go through an labored downloading processes again.
    Do you find the downloading of Content to be the same for all the other categories requiring this type of download, not just Instant Movies?
    Please review and update us on your progress.
    Thank you.
    ATR
    Add On...Although you did say that you disabled McAfee, be advised that McAfee's recent update(s) have created some serious problems for Premiere Elements. So, I would re-evaluate McAfee's possible role in all this along with the firewalls settings.

  • What is the max resolution for external monitors from the intel hd 4000 graphics driver

    What is the max resolution supported by the intel hd 4000 graphics driver found on the 13in MacBook Pro for EXTERNAL monitors?

    OK so after doing much research... this seems to be the best workflow.
    Bring HDV in to FCP as ProRes 422.
    Edit show... add bells and whistles, etc.
    Export movie as ProRes 422.
    Then for the client - ensure that they have latest version of Quicktime and download the Apple ProRes Quicktime Decoder (for mac or Windows). (It is assumed they have a decent computer to play back on.)
    The client will then be able to play a movie encoded as proRes 422 and all will be happy.
    As a back up a high resolution h264 file can't hurt.
    Thanks for everyones input. We got there in the end.

  • I bought bought my Macbook pro after 7th of June, and the store told me that i will get the Lion OSX for free, but from the app store, it is asking me to buy?

    I bought my Macbook pro after 7th of June, and the apple store employee that sold it to me told me that i would get the OSX lion as a free update, however, whenever i try to update, it is asking me to buy! Anyone knows how to solve this problem?

    Check out this link:
    http://www.apple.com/macosx/uptodate/
    Cheers

  • HELP, I have listened to the same music for 4 years.

    I have an older ipod (10KG, no color) and I downloaded a bunch of great music 4 years ago through itunes but on my parents computer, and when I moved out the music got erased.
    I really want to download new stuff to the iPod but im afraid of loosing whats on it when I connect to my current iTunes. The manual said as soon as you connect the iPod to the computer it will take what is on your iTunes.
    Is there a way to keep what I have and still get more/ newer stuff.
    Please help I have been listening to the same music for 4 years!
    Lynda
    10 K- no color   Windows XP  

    Connect your iPod to your new computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
    Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
    The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
    TuneJack Windows Only
    iPod2PC Windows Only
    iGadget Windows Only
    iDump Windows Only
    iRepo Windows Only
    iPodRip Mac & Windows
    YamiPod Mac and Windows Versions
    Music Rescue Mac & Windows
    iPodCopy Mac and Windows Versions
    There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

  • The CR 2010 for VS engine changes the margins and scales the report

    The CR 2010 for VS engine changes the margins and scales the report but only when printing.
    Environment:
    OS: Windows 7 x64 / Windows 2008 x64
    VS: VS 2010 x64
    CR designer: CR 2008 SP3.5
    CR engine: CR 2010 for VS SP1
    We have upgraded the Crystal Reports engine from version 10 to u201CCrystal Reports 2010 for VSu201D and are now having major issues with printing reports to preprinted papers, giro forms etc. because the report margins are changed and the reports are scaled (when report elements are in non-printable area?). Reports with elements in non-printable area are shown correctly in print preview (CR 2010 CrystalReportViewer) but moved to printable area when printed. This behavior was different in CR 10. Changing the PrintLayoutSettings in code is ignored when printing.
    Error u2013 The printed reports are scaled:
    -     Print in the CR 2008 Designer SP2
    -     CR 2010 for VS SP1
    OK u2013 The reports are not scaled:
    -     Print in the CR 2008 Designer SP3.5
    -     Print in the CR 10 Designer
    -     CR 10 engine
    Test:
    1) Crystal Reports Designer 2008 (with SP 3.5)
      a) Create a new blank RPT file.
      b) Set report margins to 0,0,0,0 in Page Setup.
      c) Add a box in the upper left corner (x=0, y=0).
      d) Select "Print preview" and validate that the box is located in 0,0 in preview window.
      e) Select u201CPrintu201D and validate that the box is located in 0,0 of the paper. Some of the box borders might be outside of the printable area but that is ok.
    2) Visual Studio 2010 and u201CCR 2010 for VSu201D with SP1:
      a) Create a new Windows Forms Application project (.NET Framework 4.0). Set project to u201C.NET Framework 4.0u201D and platform target u201Cx86u201D.
      b) Add the CrystalReportViewer control to Form1.
      c) Add the RPT file to the CrystalReportViewer control
      d) Run the application
      e) Validate that the box is located in 0,0 in the CrystalReportViewer control.
      f) Select the "Print" icon in the CrystalReportViewer
      h) Click the "Print" button and validate that the box is moved to the printable area which is wrong.
    Notice: In the print dialog (CR 2010 for VS) select the "Layout" tab page and see that "Scale u2026" is selected and cannot be changed. This is different from the CR 2008 Designer even though that it is the same report file and printer.

    I have done the requested test (and more - see below) and can not reproduce the issue.
    Tests done
    1) Crystal Reports Designer 2008 (with SP 3.5)
    a) Create a new blank RPT file.
    b) Set report margins to 0,0,0,0 in Page Setup.
    c) Add a box in the upper left corner (x=0, y=0).
    d) Select "Print preview" and validate that the box is located in 0,0 in preview window.
    e) Select u201CPrintu201D in the CR designer. Results in the box printing at 0,0 coordinate of the paper.
    f) Repeat all of above with a text field report
    g) Select u201CPrintu201D in the CR designer. Results in the text printing at 0,0 coordinate of the paper.
    2) Visual Studio 2010 and u201CCR 2010 for VSu201D with SP1:
    a) Create a new Windows Forms Application project (.NET Framework 4.0). Set project to u201C.NET Framework 4.0u201D and platform target u201Cx86u201D.
    b) Add the CrystalReportViewer control to Form1.
    c) Add the RPT file to the CrystalReportViewer control
    d) Run the application
    e) Validate that the box is located in 0,0 in the CrystalReportViewer control.
    f) Select the "Print" icon in the CrystalReportViewer
    g) Click the "Print" button
    h) Text filed report test results in the text printing at 0,0 coordinate of the paper.
    i) Box report test results in the text printing at 0,0 coordinate of the paper.
    3) VS2010 IDE
    a) Create a new blank RPT file.
    b) Set report margins to 0,0,0,0 in Page Setup.
    c) Add a box in the upper left corner (x=0, y=0).
    d) Preview report in the ID designer and validate that the box is located in 0,0 in preview window.
    e) Select u201CPrintu201D in the IDE designer. Results in the box printing at 0,0 coordinate of the paper.
    f) Run above report in code
    g) Preview report and validate that the box is located in 0,0 in preview window
    h) Select the "Print" icon in the CrystalReportViewer
    i) Click the "Print" button
    j) Text filed report test results in the text printing at 0,0 coordinate of the paper.
    k) Repeat all of above with a new report that uses a text field rather than a box.
    None of my reports have the option "No Printer" checked.
    All of my reports have the option "Dissociate Formatting Page Size and Printer Paper Size" checked
    From the above, you can see that all of the printing tests result in consistent printing, be it a report created in CR 2008 or CRVS2010, useing a box or a field. No difference in printing.
    Suggestions:
    1) I am not sure if you have followed the steps you recommended. E.g.; are you creating a new report or using your existing report? See if following the steps described reproduces the issue (it may be there is something specific to your existing reports)
    2) Make sure you have the latest printer driver available for your printer
    3) Try a different printer
    4) Add a report to the VS2010 IDE and preview the report in the IDE of VS2010
    5) Compare the "No Printer" and "Dissociate Formatting Page Size and Printer Paper Size"  options
    6) Consider creating a phone case so a support technician can troubleshoot the issue with you
    - Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Any ideas on the best Config for RAID-0 on the Precision M6800 using SSD's (and the mSATA slot)

    Hi,  I have an M6800 on order that has a single 500GB 7200RPM hard drive.  I am going to upgrade the storage the day it arrives (removing the 500GB drive and not utilizing it at all).  I plan on setting up an SSD RAID-0 array and want to take advantage of the mSATA slot if possible. 
    I thought of using the 2TB 2.5" Seagate/Samsung Momentus SpinPoint ST2000LM003 hard drive for storing unused vhd\vhdx files as well as video and photos,  then using an SSD RAID array for the OS, Applications, Data and any active vhd's. 
    Is it possible to set up RAID-0 using the mSATA SSD slot and the primary internal hard drive slot?  I want to use those 2 drive connectors so I can still use the 2TB 2.4" regular notebook hard drive without removing the Blu-Ray Writer?  I plan to write video to Blu-Ray discs that will be stored on the internal 2TB drive, so removing the optical drive is something I want to avoid.
    As a general question, Is there any advantage to using RAID with SSD's, or would a single 1TB mSATA SSD in the mSATA slot be nearly as fast in real world use as a 2 disk SSD RAID?  Would I have a noticibly quicker boot time and application load time if using SSD RAID?  I know the speed test specs show large increase in performance, but will the computer really run a lot faster with 2 x 500GB SSD in RAID-0 as opposed to getting a single 1TB SSD card for the mSATA slot?
    I was planning on getting the Samsung Evo 840 SSD 2.5" drive and the matching Evo 840 mSATA card.  There is a Samsung 850 series drive, but it is only available in 2.5" (mSATA is not available in the 850 as far as I can  tell).
    Please suggest the best solution that is compatible with the M6800 or provide any information that might help.
    Thanks

    Hi Ential, 
    Thanks for the info, I thought my question would go unanswered forever.  I posted the question in January, and I have since set up the computer.  Below I will detail my research and the configurations of drives that I have used on my M6800 since the time I posted the question you answered.  Perhaps the results of my research and testing might help you. 
    I originally I bought the same exact model SSD's that Dell sells with the computer thru their website;    the LiteOn 512GB drives (mSata & SATA),  I configured them in RAID-0.  The LiteOn drives are sold under the brand name Plextor,  I found the proper model numbers by looking at the SSD drive firmware upgrade file from the Dell support website.
    From what I understood,  my RAID-0 drive consisting of the 2 LiteOn drives had impressive performance using the AS SSD benchmark program,  I was getting performance scores over 1600 back in February.
    I have since changed to the Samsung EVO 850 1TB drives and again created a RAID-0 drive,  one SATA drive and one mSata drive totaling 2TB.  This drive array is getting AS SSD performance scores over 1900.  I contacted Samsung to get some advice on the configuration of the drives and I got some interesting advice that seemed to help a lot:
    Samsung told me to leave 200GB of the drives (100GB each) unallocated when I partitioned the drives,  this is generally referred to as "overprovisioning" (which you probably knew already).  I initially thought that overprovisioning could only be configured by the Samsung Magician software and a special process needed to take place to tell the firmware to utilize a specific amount of drive space for overprovisioninng.  The Samsung support agent told me that the Samsung SSD firmware (on both mSata and SSD) automatically uses any unallocated space as overprovisioned space (they are basically the same thing to the drive firmware) and it increases performance in a very  noticible way when you have sustained use of the drive and/or durinng the time in between the TRIM process (garbage collection).  The unallocated space is used by  the firmware to write data to while blocks of data are awaiting internal wiping initiated by the TRIM process.
    Since I have 200GB of unallocated space,  I am able to have more sustained deletion and writing of data between TRIM/Garbage Collection runnninng than I would ever utilize without affecting the performance of the drive.  Basically most SSD drives have performance decrease throughout  the day until the TRIM process is completed by the drives firmware,  so Samsung instructed me to leave at least 10% of the drive space unallocated to limit that problem.  Smaller drives likely need a higher percentage of space unallocated as compared to larger drives since the daily amount of read/write operations is typically the same regardless of drive size.   The amount  of space left unallocated/overprovisioned is based upon the amount of read/write operations done on any given drive,  not based on the size of the drive itself.  If you run drive intensive applications, you would then want to overprovision more GB of drive space,  if you have light use of the drive then you can overprovision/unallocate less GB of drive space (all of the configuration info regarding overprovisioning and TRIM was given to me by a Samsung specialist over the telephone - I called their tech support phone number and got a storage specialist to talk to me). 
    I will look into the SATA version on the optical bay,  I never thought about that with this computer.  My prior computer was a Dell XPS 17 3D (L702X) notebook which had 2 internal 2.5" SATA,  in which I installed an optical bay drive.  On that specific computer the optical bay was technically an SATA 3,  but due to design constraints it couldnt run at that speed since there was voltage leakage across some pathways in the chipset when the optical bay has read-write throughput that is typical of a hard drive (as opposed to much less data transfer typically seen on an optical drive).  The M6800 can be factory configured with an optical bay hard drive, so I suspect it can support one properly.  The XPS 17 was not available with an optical bay drive as an OEM configuration from Dell,  so it couldnt be expected to properly support one.  The design issue with the voltage leak across the chipset pathways on the XPS 17 was known by Dell,  but due to the low bandwidth of an optical drive, the problem never occured with any of the factory OEM configurations.
    It is possible that the optical bay  hard drive offered by Dell (the exact OEM Drive installed by Dell) could have an internal limitation to SATA 2 due to a similar design limitation.  It would not be surprising if an SATA channel designed for optical drives had SATA 2 speed since I suspect there is no SATA Optical drives that could use more than 3GB/s of data anyway. 
    I purchased 2 of the 2TB 2.5" hard drives that Dell uses for OEM configurations for this computer,  they are Samsung 5400 RPM drives.  I have one in a 2.5" internal bay and the other in the optical bay - I converted my Blu Ray Recorder/Writer drive to an external drive.  I will do some extended time speed tests on the optical bay drive to see if its performance matches the internal drive (which  is the same exact model drive - I have 2 of the same Seagate 2TB drives installed with the same firmware).
    I use the pair of 2TB drives to store .vhd and .vhdx drives for test platforms for Hyper-V machines.  The virtualized servers with high hard drive utilization get moved to the SSD RAID-0 array,  the rest are stored on the 4TB rotational drives. 
    If you have any questions or comments for me,  please let me know.  I will see what info I can find on the optical bay SATA revision for this notebook,  I am very curious to find out if it is in fact SATA 2.  I will let you know what my test results are,  I will try to use the AS SSD benchmark program,  I believe it will work with rotational drives,  otherwise I will find another benchmark utility - do you have a recommendation on which to use?
    Thanks again for your info and for pointing out the possible limitation of the optical bay..

  • I'm trying to download itunes 10 but I get to a point in the download and it tells me, "The feature you are trying to use is on a network resource that is unavailable" but I haven't had itunes on my computer for a year now so how can I get around this?

    I'm trying to download itunes 10 but I get to a point in the download and it tells me, "The feature you are trying to use is on a network resource that is unavailable" but I haven't had itunes on my computer for a year now so how can I get around this?

    iTunes.msi
    Perfect, thanks.
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • HT201209 Trying to redeem a free download for a song from KLove. When I get into my acct & try to redeem it, it just keeps bringing up the "sign-in" box. When I click the button on KLove's webpage to redeem it takes me to that page but does the same thing

    Trying to redeem a free download for a song from KLove. When I get into my acct & try to redeem it, it just keeps bringing up the "sign-in" box. When I click the button on KLove's webpage to redeem it takes me to that page but does the same thing

    Get the redeem code from the KLove page:
    http://www.klove.com/music/store.aspx
    ...and enter it into the Redeem Code box in the iTunes Store.
    You will have to sign in to your iTunes account.
    It worked fine here.  If that doesn't work for you, let us know what went wrong.

  • Abort Could not determine a value for variable 0DAT from the authorizations

    Hi All,
    I encountered an error '/ Abort Could not determine a value for variable 0DAT from the authorizations\' when executing my query on a multiprovider in BW 3.5.
    Can anyone help me in finding a solutionn to this issue.
    Thanks,
    Kartik.

    Hi Kartik,
    I am sorry as that note is for NW2004s. Please check if 0DAT variable installed from a business content? if not then I think thats the cause of the problem.
    Hope this helps,
    Bye...

Maybe you are looking for