I am new here and could not be any loster :/

hello, i am wanting to add darker eye nose and mouth shadows to an existing silhouette.
Can anybody please help me?

It took a minute to realize that "Loster" meant "more lost". Wow!
Without seeing the image it is difficult advise you with a sure-fire approach. The key word in your inquiry is "darker" which implies that the shadows already exist. In that case, you might use the Burn tool (it is nested with the Dodge and Burn tools) and set the Exposure in the Options bar for a low value for greatest control and paint. Each stroke will make the area darker..
A more professional Dodge & Burn technique would be to:
1. Add a blank layer
2. Edit > Fill > 50% Gray
3. Set the Blending Mode to Overlay
4. Set the Opacity in the Options bar to a low value for greatest control and paint repeatedly with a soft edged brush in black to darken an area or white to lighten an area. If you overdo a darkening, switch to white and slowly lighten your burn.
The advantage of this technique is the original image is not compromised and, at any time in the future you want to modify your corrective work, you simply adjust the dodge & burn layer.  

Similar Messages

  • TS5185 Hi After I have report a junk message I coudl not get Imessge from other iphone. and could not send any message in blue color but green which need to pay for.

    Hi After I have report a junk message to 7726, I coudl not get Imessge from other iphones. and could not send any message in blue color but green which need to pay for. Does Apple blocked my imessage ? I have checked the setting. imessage is on.
    Thanks,
    J

    Make sure that your date and time settings and time zone are accurate (Settings - General - Date and Time). Reset your phone to 'Set Automatically' and then try signing in again - this worked for me.  My date/time settings were not automatic (candy crush cheats!!).

  • I could not open my windows live hotmail emails and could not send any emails as well,how do I make it work again?

    I could log into my windows live hotmail account but I could not send any emails or open any emails.
    == URL of affected sites ==
    http://sn122w.snt122.mail.live.com/default.aspx?wa=wsignin1.0

    Hello David.
    You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    In addition, read this article:
    http://support.mozilla.com/en-US/kb/Websites+look+wrong

  • Hi Every1, I am new here and could use some advice!

    Any1 out there have any suggestions for some1 who shares a Verizon account with a control freak future-ex who behaves like he is punishing me for not< "snapping to" when ordered to do so?
    See, he went out for a drive one night to clear his head! He came home the next day at about the time when he knew I had a doctors appointment. He ran out on our son and I and moved in with his girlfriend! I didn't know he had a girlfriend!!! My son and I were crushed and felt discarded. Well, we got over that and now having problems because when future ex left us, he made himself manager of the account which requires permission from him to do almost anything.  Both, our son and I have asked for permission and in the case of our son, help resolving an issue with the smart phone he is having trouble with! He behaves like the typical control freak! Initially, he was going to peel off of our original account and open an account of his own. But I am betting he found out if he separated himself from our/my Verizon account, he would loose our grandfathered unlimited data plan!
    The future ex also upped the minutes on this account to 1400 minutes a month and it's really annoying because he was always in our faces about not going over our shared 700 minutes for the last seven or eight years. We all, at one time or another, went over on minutes and we temporarily had to up our minutes for that month we went over. As soon as that billing period was over, he would make certain that he switched the minutes back ASAP.
    Anyhow, he will not give permission for us to do anything in that account. That includes me being able to register a replacement phone that I had to purchase because I blew the screen out and who knows what else, on my incredible on Christmas Eve when I dropped it on Sam's Club cement floor and the phone case basically exploded! Well, funnily enough, the phone itself still charges thru USB connected to the desktop. It also rings when a call comes in and alerts when i get vm. I can hear it linking to the desktop with the two note bong bing or disconnecting it from the desktop and it alerts with the bing bong. It also syncs with the computer because it was set to sync before I killed it! It doesn't respond to anything to do with the screen but I suspect the impact snapped something on the case, not just the screen not illuminating!
    If I could afford to, I would open my own account and chalk it up to experience...just to make things a bit more stressing for me, his income was two-thirds of our total income and he will only pay for the Verizon account, our homeowners insurance and his home depot card. That is until recently when I told my financial institution that I had canceled my draft for the automobile insurance and had the financial institution contact him, as well as the insurance company, to tell him that I have it in writing, from when he first left, that he would pay both insurance payments. He attempted to let all that go by because I wound up with other troubles as my social security check was cut almost in half by an error in their system which has left me upside-down by $809 and cost me approximately $690 in NFS fees against my account! Social Security is the only income I have as I am disabled and have a hard time going out to get groceries! Being without my smart phone has been a real challenge as there are some days when I cannot get out of bed! Watching television all day is depressing to me when I don't have a choice!
    Sorry this is so long but I want to make certain I don't omit anything and misrepresent myself and cause anybody to go, "hey, why did she say that"! Yeah, that is what happens when you choose to live with an abuser! Five nights after he left, he came to pick up some of his property and brought his girlfriend with him. Not arrogant at all! That instigated an atmosphere of non-cooperation from me and some things happened! I will spare you all the details because there were too many! He wound up assaulting me and two teenage boys who were helping me carry his stuff out to the sidewalk, as agreed upon by both my husband and myself in advance. After he assaults us, he called the cops, I cannot figure out why other than to say he always feels like he is justified doing anything he pleases. The cops wound up arresting him for assaulting us! He had all kinds of trouble after that and although I told him I didn't press charges and neither did the boys. The State, County and Town did. No non-sense policy here and he was dumb enough to call the police after assaulting three people and ever since then, he won't cooperate on anything for me!
    I hope some1 can help me! I did call Verizon and explain the situation but they keep telling me they can't do anything to help me because of the privacy act!
    So I am stuck without a phone and I feel really vulnerable without it!
    Thanks for reading this and i promise to be short and sweet in the future!

    difinka wrote:
    Any1 out there have any suggestions for some1 who shares a Verizon account with a control freak future-ex  ...
    So I am stuck without a phone and I feel really vulnerable without it!
    I agree with jim, there's no need for all the details.  If the "future ex" is paying the bill, and his name is on the account, then legally, he calls the shots.  If you can't live with the terms, then give him back your phone and your son's, let him decide what to do with those lines.  And do as jim suggested - go get a basic prepaid phone that will keep you connected for minimal (affordable) cost.

  • My keyboard has stopped working on my iMac I bought a new keyboard and still not working any ideas?

    MY keyboard has stopped working on my iMac I bought a brand new one and the keys work but the volume buttons do not operate the volume I've changed it twice now and the same thing is still happening

    What is the make & model number of the keyboard?
    You could get a keyboard remapping program & map someother key to the volumn key.
    There is a list of them in this thread.
    https://discussions.apple.com/message/13208090?messageID=13208090#13208090?messa geID=13208090
    Robert

  • I RECENTLY HAD A BUG PLANT IT SELF IN FIREFOX AND COULD NOT UTILIZE ANY PUTER FUNCTIONS. I HAD TO UNINSTALL FIREFOX BUT, WHEN I RE-INSTALLED I HAD LOST ALL MY BOOKMARKS. DOES ANYONE KNOW IF/HOW I CAN RETRIEVE THEM ??

    I HAD QUITE A FEW BOOKMARKS IN MY FIREFOX 3.6 VERSION.
    A BUG PLANTED ITSELF IN FIREFOX AND ESSENTIALLY DISABLED IT.
    MY ONLY RECOURSE WAS TO UNINSTALL FIREFOX. I DID THIS AND THEN RE-INSTALLED IT.
    NOW, ALL BOOKMARKS ARE GONE.....WTF ?!?!

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    # Shockwave Flash 10.0 r45
    # Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • Hi, I have a new laptop and would like to syncronise my iphone with iTunes (which I have installed again). But my old laptop has died so I could not transfer any media files, etc. Can I simply connect my iPhone to the laptop without any data being lost?

    Hi, I have a new laptop and would like to syncronise my iphone with iTunes (which I have installed again). But my old laptop has died so I could not transfer any media files, etc. Can I simply connect my iPhone to the laptop without any data being lost?
    Many thanks in advance!

    you have a new phone and a new comp and you want to restore to your old data ?!
    I can't think of anything but icloud, and what was purchased via itunes

  • Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk.

    Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk. I press the :c" button on startup but its not picking up the disk in the rom, i have tried to put the disk in an external rom but same answer, am starting to think that my os disk is bad. Please help me.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    *Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Recently in the Bahamas where I helped a friend with his new iPad. We could not find Bahamas in initial setup so we used United States and could not enter Visa/MC billing address in Bahamas. iTunes rejected, billing info is not what's on file. What to do?

    Recently in the Bahamas where I helped a friend with his new iPad. We could not find Bahamas in initial setup so we used United States and could not enter Visa/MC billing address in Bahamas. iTunes rejected, billing info is not what's on file. What to do?

    Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app.  I am certain other applications also need this information.  Although lengthy, I could not find a more comprehensive place to retrieve this information.  Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Hi , i'm new here and i would like to ask a question about iPad 2 . Well , actually when i hold my finger on any icon , its not jiggling , i need to fix the icons . May i know what can i do in this case ? thank you in advance ,

    Hi , i'm new here and i would like to ask a question about iPad 2 . Well , actually when i hold my finger on any icon , its not jiggling , i need to fix the icons . May i know what can i do in this case ? thank you in advance ,

    Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • Could not open firefox and tried to update newer version but could not with error msg "can not create temp folder archive"

    Tried to run firefox as usual but the the page could not connect the server. Thus, uninstalled the browser and tried to install a newer version. Could not run the program and error msg "can not create temp folder archive" popped up.

    See http://answers.yahoo.com/question/index?qid=20080702200623AAOYP13

  • I erased my HD and could not install lion. if I turn on the mac now all I see is a folder with a question-mark. How can I install a new operation system?

    I erased my HD and could not install lion. if I turn on the mac now all I see is a folder with a question-mark. How can I install a new operation system?

    Install or Reinstall Mavericks, Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • I am traveling with a new computer and do not have my software (Acrobat Pro) to load but hoped I could do so with my serial number

    I am traveling with a new computer and do not have my software (Acrobat Pro) to load but hoped I could do so with my serial number

    Hey,
    Do you have access to the internet?
    You might visit Adobe website and download Acrobat pro on your system.
    Then, you can use your serial number for activating the software.
    Regards,
    Anubha

  • My new 3 month old imac 27 with 10.6.8 snow is giving a **** of noise from the fan. suddently starting after today starting up. and the volume buttoms and screen lights up and down not working any more.. any one who can help here???

    my new 3 month old imac 27 with 10.6.8 snow is giving a **** of noise from the fan. suddently starting after today starting up. and the volume buttoms and screen lights up and down not working any more.. any one who can help here???

    Try an SMC Reset. (System Management Controller)
    Shutdown>unplug from power for ten minutes>press and hold in the power button for ten seconds>startup again.
    Also try a PRAM Reset. (Parameter RAM)
    Shutdown. At the bootup chime, hold down CMD-Option-P-R together, wait for two more chimes, total three, then let go of all keys to finish booting,
    If this doesn't do it, run the Hardware Test in Extended
    http://support.apple.com/kb/ht1509

  • Cannot open PDF - "file is damaged and could not be repaired"

    We created a signable, saveable, Reader Extended PDF in Acrobat X 10.1.4, with a Submit button that exports it using the "PDF The complete document" format to a .php page on our website using the url: http://www.todayscihld.us/pdfscript/fdf.php?form_name=WebForm 
    This is the .php page that's supposed to receive the export via the submit button and email it as an attachment:
    <?php
    // $form_name is provided in the url that calls this page, allowing this page
    // to be called from different PDF's, yet customized for each one
    $date = (date ("m/d/y"));
    $time = (date ("H:i:s T"));
    $tmpname = (date ("mdy-His"));
    $message = '
    This is a multi-part message in MIME format.
    ------=_NextPart_000_0007_01C37EC6.3F062EA0
    Content-Type: text/plain;
        charset="iso-8859-1"
    Content-Transfer-Encoding: 7bit
    A '.$form_name.' was submitted from the Website at '.$time.' on '.$date.'.
    (attachment: '.$form_name.')
    ------=_NextPart_000_0007_01C37EC6.3F062EA0
    Content-Type: application/vnd.fdf;
        name="PDF-'.$tmpname.'.pdf"
    Content-Transfer-Encoding: base64
    Content-Disposition: attachment;
        filename="PDF-'.$tmpname.'.pdf"
    '.base64_encode(file_get_contents('php://input')).'
    ------=_NextPart_000_0007_01C37EC6.3F062EA0--
    $recip = "[email protected]";
    $subject = $form_name;
    $headers = "From: Website <[email protected]>\n";
    $headers .= "Return-Path: <[email protected]>\n";
    //use the following line for bcc:
    //$headers .= "bcc: [email][email protected][/email]\n";
    $headers .= "Content-Type: multipart/mixed; boundary=\"----=_NextPart_000_0007_01C37EC6.3F062EA0\"\n";
    $status = mail($recip, $subject, $message, $headers);
    Header("Location: http://www.todayschild.us/page.php?3");
    ?>
    Most of the time this works, however some of the time we get blank PDF files (<10KB), and sometimes we get filled PDF files that we cannot open in Adobe Reader X 10.1.4 - we get the "file is damaged and could not be repaired" error.  However, I can view this "damaged" pdf just fine in the Chrome built-in PDF viewer, and I can open it using Foxit Reader and Nitro Reader.  And if I open it in one of those programs and then save it under a new name, I can open the newly saved file in Adobe Reader.  So why is it that everything except Adobe Reader can open this file?
    Here's one of these problem PDF files: https://dl.dropbox.com/u/65535781/PDF-112612-162749.pdf
    Can anyone help me figure out what's going wrong, and what we can do to fix it? 

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Maybe you are looking for

  • How do I transfer my contacts and other information from my 4S to my 5S when I receive it?

    In the past, I've always purchased my iPhone upgrades from the store (either Apple or AT&T) but I think I'm finally savvy enough to do all this on my own. I searched the knowledge base but I couldn't find anything that addressed this particular issue

  • Java.lang.exception : no such matric

    Dear My Friends I am using 10g 10.2 on Windows 2000 As when i start Oracle Enterprise Manager Database Console the console given me error Java.lang.exception : no such matric how i fix to this problem. Thanks in advance Rgds Muhammad Tahir Khan (TeeJ

  • BPEL Variables in to Transform activity (XSL)

    Hi, I need to access a BPEL variable from within a Transform activity (XSL). I need an output like this: <XML> <val1>1</val1> <val2>2</val2> <val3>3</val3> <val4>4</val4> </XML> Val1 and val2 is reachable from the xsd in the Transform activity (sourc

  • How can I copy and export a speaker track between project file?

    Hi, I am using Premiere Elements 12. I need to copy a speaker track (nothing else) in one project file and paste it into a new track in another project file. I can mark and copy the track but then it is IMPOSSIBLE to paste it. I have no such option -

  • Abaper with FI and SD Integration experience?

    Hi Friends, I was curious to know as to what is the role of an Abaper in integration of functionals modules of FI and SD? What are the steps involved in integration and what kind of knowledge he should possess? Regards, MD