I am new to a MAC.  I have an external hard drive that I used with my Windows XP computer.  Can I reformat it

I am new to MAC.  I have an external hard drive that I used with my former computer running Windows XP.  Can I reformat it to use with my new MAC?  If so, how do I do it?

Yes you can. See the following:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Similar Messages

  • HT1751 Hi.        I want to transfer my iTunes library from my pc to either my new MacBook Air or ideally to an external hard drive that I use as a backup for my Air. I would want to be able to sync the iPod with the library on the hard drive. I

    Hi there
    I would like to transfer my iTunes library from my PC to my MacBook Air or if possible to an external hard drive that I use to back up my Air.
    I understand that you can't use the same hard drive for PC and Mac.
    Would really like to do away with the PC and sync the iPod to the Air.
    Am about to purchase a new iPod nano as my Classic is broken.
    Would appreciate any feedback please!!

    You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
    http://www.macupdate.com/app/mac/24481/ntfs-3g
    If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

  • HT4718 I have an external hard drive that I used as Time Machine Backup. I have not used it for a while and now, when I plug it in computer says:  This disc is not readable. I want to recover the backups and not erase and reformat the disc.  Thank you in

    I have an external hard drive that I have used as Time Machine backup, but not for a while. Now when I plug it in, computer says this disc is not readable.
    I want to keep the backups on it and not erase and start over.
    Thank you in advance.
    Gregor

    It sounds like something went wrong with the drive.  Did you drop it?  How long has it been sitting around unused?

  • I have an external hard driver that I used to use with my old pc, but now I have a mac and I can see all of the files on it and open them, but I can't add things to it. How do I fix this?

    I use my external hard drive to store all of my music, but now I can't save anything on it with my new Mac. Is there a way that I can reformat it or something without losing everything I already have on there?

    I suggest to copy all your files in your external drive to your Macbook and reformat that external drive to Mac OS Extended Journaled or exFat.
    Once you've done that - then copy all the files back to your external drive.
    Do not format your external drive if you haven't copied whats in your external drive.  You'll lose everything.

  • HT1151 I have a WD brand external hard drive that plays up with i plug it in, can i down load software to fix this?

    I have had a few problems with my extrenal hard drive on the mac pro. I have an old windows computer and it still works well with the new passport hard drive but when I plug it into the mac it will not let me delete, add folders or change anything in the hard drive at all. Is there anything I can do to fix the problem? Please help!

    The key is you say you can use this with a PC.  That means it is very likely the drive is formatted to NTFS which Macs can read but cannot write.
    There are utilities such as NTFS-3G which can add capability, though they are not ideal.  Likewise others to enable Mac formatting on PCs.
    If the files are small ones you can re-format the drive (back up first!) and use FAT format which both computers can use.
    Often the best thing is unless you absolutely have to use this drive with both computers just get another one for Mac use.
    [10.4: An overview of NTFS support in Tiger|http://www.macosxhints.com/article.php?story=20050521110452194]
    NTFS drivers for newer Macs (there may be others, and I am not sure if these will work with Tiger):
    Paragon NTFS - http://www.paragon-software.com/home/ntfs-mac/ - recommendation: https://discussions.apple.com/message/18708633
    Tuxera NTFS 2012.3.2  - http://www.macupdate.com/app/mac/33122/tuxera-ntfs
    NTFS for Mac OS X 9.5.3 - http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
    Mac Drive for PCs - http://www.mediafour.com/products/macdrive

  • I recently bought my first mac and am wondering if my external hard drive that I used with my pc will be compatible?

    I know that it will not be formatted for a mac, so does that mean I will be able to pull up information but not change or add to the content at all?

    MelK1983 wrote:
    How do I know that?
    Use Disk Utility which can be found in Applications - Utilities.  Select the external drive in the left-hand sidebar and info will appear at the bottom of the window, including formatting information.

  • I have a Toshiba external hard drive that i used to back up my Windows 7 HP -- I want to transfer files to my new Mac and it won't accept. Help?

    I have a Toshiba external hard drive that I used to back up my Windows 7 HP -- I am not able to get the files off of it (pictures) onto the Mac. I am NOT a very technical person. IS there a simple easy way to explain and do this -- OR a simple way to just say it is not possible?

    If you connect the external hard drive to your Mac does it show up in the Finder? If so, do the files you are trying to transfer show up? What happens when you try to move them over?
    What kind of Mac are you using and what operating system does it have running on it?
    Let us know, we'll keep helping you.
    Best of luck.

  • I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

    I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc.  But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

    You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
    http://www.macupdate.com/app/mac/24481/ntfs-3g
    If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

  • I have an external hard drive that I have been using for years.  All of a sudden my mac will not recognize the external as a "save as" device location.  But the external does show up on my desktop and I can open it to drag and drop items. Help.

    I have an external hard drive that I have been using for years.  All of a sudden my mac will not recognize the external as a "save as" device location.  But the external does show up on my desktop and I can open it to drag and drop items.  What happened and how do I get my mac to rerecognize the device?!?!?

    Hi,
    Check Finder>Preferences>Sidebar, is it checked there to show external drives?

  • I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out.

    I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out. I am trying to determine what is wrong with the drive.
    I need the data on the drive and it won't show up in Disk Warrior. I have tried different Mac's and different USB cords only to find the same outcome. When selected in Disk Utility the information read as such...
    Disk Description : WD Elements 1023 Media                      Total Capacity : 500.11 GB (500,105,740,288 Bytes)
    Connection Bus : USB                                                               Write Status : Read/Write
    Connection Type : External                                                     S.M.A.R.T. Status : Not Supported
    USB Serial Number : 575837314135304D36373132        Partition Map Scheme : Unformatted
    As the drive shows in Disk Utility there must be some life left in it surely. There is a possibilty that the physical connection between the USB cord and the external drive is damaged but since the drive shows up I believe it's unlikely... before I give it to the pro's is there anything else I can do to diagnose the issue?

    Hello,
    I have just experienced the same thing!
    Although my external drive shows in Disk Utility, it does not show in Finder.
    And the Verify/Repair buttons are also greyed out.
    Also, although the drive is 2TB. DU shows it as having Total Capacity of only 4.14GB! (Which should be the Free Space).
    I was wondering if you solved your problem, & if so, would you share your solution.
    I´m afraid to Erase in case I lose all my Data on the drive.
    Thanks in advance for your reply!

  • I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

    I keep getting "error occurred while attempting to import file *******. The disc your are attempting to use is full." I have an external hard drive that I moved files over to, but apparently they're also still on my hard drive? HELP!

    So you have backed up the content of the computer's hard drive, too?
    That usually is a great idea since it is possible to lose use of the system
    if parts of it have accidentally been removed or get over-written, or the
    main system files get corrupted, when the hard disk drive gets too full.
    If you have not trashed the originals of your created content, that remain
    after you made copies on an external hard drive or other device, then
    that is what you'd have to do to reclaim the capacity still in use by them.
    What are specifications of the hard disk drive? The unused capacity
    verses the used, in GB? If the hard drive has less than 15 to 20%
    free or unused capacity, you could run into trouble. Mine are 40-50%
    unused hard drive space, so ample room is available for automatic
    Virtual Memory to use that capacity as temporary swap file space.
    This is helpful when the computer could use more physical RAM
    memory capacity, but doesn't have it. Or if the RAM is maxxed out
    and you can't add any more. Virtual Memory is part of OS X and the
    system automatically can use as much as is available, but it is better
    to be sure there is plenty of resources available to include chip RAM
    as well as unused or free hard drive capacity for use as VM.
    If for some reason your files in Trash won't go away when you empty
    it, you may have to restart. Be sure you have not included any System
    files in the content in the Trash, or the Mac may not start up later on.
    You may have to boot the computer from the install-restore OS X DVD
    and run Repair Disk from its version of Disk Utility, to be sure it's OK.
    I'm guessing that by now you know enough about the vintage system
    in the older hardware to figure it out, so I won't write about it now.
    In any event... hopefully you can simply trash the files, but check them
    carefully, & you may need to remove (copy to archive first) even more.
    Good luck & happy computing!

  • I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac.

    I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac. My Macbook Pro and the two different iMacs I tried it on were all using Mountain Lion, so the only difference was the iMac versus Macbook Pro.

    I just tried this, no luck...
    I connected a different USB cable, still the same problem. Tried both cables with the problematic hard drive on two different computers, still the same problem.
    At this point I assume I'll probably need professional help in saving the files, thanks for the assistance.

  • I dont have an external hard drive. How do I back up my computer before installing the Snow Leopard?

    I am upgrading my computer from leopard to snow leopard. Is it necessary that I back up? I'm afraid I will lose all my data. I dont have an external hard drive. Is there another way to backup? I dont even know how to use Time Machine...
    AGH!! PLEASE HELP!

    Go out and buy one. You should have a backup.
    To upgrade you don't need a backup, but if the upgrade goes awry then what? You've got nothing but a ocmputer that doesn't work. Now you must erase the drive and restore everything from scratch. And, all your data are gone. Is that all worth the risk?
    If you choose not to make a backup then at least do this before installing Snow Leopard:
    Repair the Hard Drive and Permissions
    Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Now, boot from the Snow Leopard DVD and install it.

  • I am new to mac and have an external hard drive question

    Hello
    I am new to mac. I used a PC before and stored all of my files (documents, photo's and music) on an external hard drive. The new mac is communicating with my external and is allowing me to open word/excel documents into pages/numbers. However when I go to save the document to my external the mac tells me "your document could not be saved. you can duplicate the document or discard your changes to close it."
    Is this happing because the external is formatted to PC and not mac? Will I need to get a mac external hard drive if I wish to continue to save my documents like this? or will I need to get Miscrosoft office for mac for me to continue to use my existing external? or will i need to duplicate everything to save?
    Please help.
    Thanks
    Janice

    Is this happing because the external is formatted to PC and not mac?
    Yes that is correct.
    Will I need to get a mac external hard drive if I wish to continue to save my documents like this?
    If you no longer use a PC you could format this drive for the Mac. However be aware that formatting a drive will erase all the data on it. So you would need someplace to copy the data off this drive to while you did the re-format and then you could copy the data back.
    You could get another drive, format it for the Mac and copy the data to it. Then re-format the original drive and use it as a backup drive. Always good to have backups.
    Post back with the drive type and size of the current drive, if you are doing backups now and how and if you still need to access this drive from a PC.
    regards

  • What should I format my wd external hard drive to to use with my new Mac Pro?

    What format should my wd external hard drive be in order to use with my new Mac Pro?

    If you're going to use it only with Macs, use Mac OS Extended (Journaled). It's the fastest filesystem to use on Macs.
    If you're going to use it with PCs and Macs, use exFAT or FAT. I recommend exFAT because it hasn't got limitations as FAT and it's faster, but you need Windows XP Service Pack 3 or later to use it on PCs

Maybe you are looking for