I am no longer able to use my microsoft exchange active sync account

I have been using my active sync account in my iphone just fine up until last wednesday 6/1/2011.  It keeps saying can't connect to server.  All of the other internet services and mail services work just fine.  I have been on the phone with Comcast making sure all the settings are correct for their active sync server

I have no advice for the OP but a quick story ....
Allan Sampson wrote:
This must be a Comcast business account.
Yes it is a business account through Comcast and I have one as well. I can not explain this but the exact thing happened to me about one week ago and no matter what I did I could not get it to work after having used it successfully for months.
I deleted the account and then could not reinstall it. I came home from work and restored my iPad to my backup from the night before and still had no luck with mail except that the mail account was back on my iPad.
About 36 hours after fighting and trying to reinstall the account - it inexplicably began to work again.

Similar Messages

  • Battery drain after 2.2 update (Exchange Active Sync users or those who use a calendar on the phone)

    A lot of folks are having "issues" with battery life after the over the air (OTA) update and there has been much speculation as to the cause.  My frustrattion level increased with each new post I read that did not reveal a resolution.  The back and forth banter about FTC complaints (that was an interesting escape from the battery problem but not very helpful), new apps running from startup (I don't like 'em either), Linux really working better with all these programs running (don't really care as long as the battery level isn't drained after an hour of just sitting on the counter) just made matters worse.
    I would like to share with you my experience and hope that it helps some of you who have taken the time to read my post.  First, let me say that the cause is not due the the "bloatware" applications that were installed during the OTA update.
    Secondly, the primary purpose of my handheld is for voice calls but running close behind is my need for immediate email, contacts and calendar information (which is configured through Exchange Active Sync).  If you are not using your phone with Active Sync or updating a remote calendar like Google), you can stop reading this post.
    I noticed that the yin/yang (sync) icon at the top of my screen kept popping up more than usual after the update.  Looking through the items I have set to sync (Menu -> Settings -> Accounts & Sync), I reviewed all the things I have set and disabled the sync settings for the things I did not want.  After disabling the "Backup Assistant", "Google", "News", "Stocks" and "Weather", I thought for sure the issue would be resolved.  Not yet.  When those adjustments didn't change the frequency of the sync, I decided to look at the Exchange Active Sync and to my surprise, the culprit was revealed - the calendar was stuck in a sync loop (syncing over and over).  I disabled the "Sync Calendar" feature and the phone stopped it's maddening attempt to refresh the calendar.
    I let the phone cool off and thought that I could get by with manually toggling the option to sync the calendar but I couldn't accept that was the only way this thing would work.  I removed the Exchange Active Sync account and created a new one.  After the new account was verified, it attempted to sync mail, contacts and calendar but this time, there was a error that occured during the calendar sync.  Instead of repeatedly attempting to re-sync, an error message that stated "Client/Server conversion error".  At this point, the calendar sync loop was no longer a problem (wasnt' draining the battery) but now my calendar wouldn't sync at all. 
    To fix it, I cleared the data in the Calendar applications (Menu -> Settings -> Applications -> Manage applications -> All [tab at the top]). Scroll down the list and open each of the Calendar items and click the "Clear Data" button. 
    (Credit goes to "Brenny" at AndroidForums.com for the post that explains how to clear the Calendar Data)
    It seems that adjustments made to events before the update were kept in the phones local storage.  After the update, the calendar data in the phone's cache was not matching my remote calendar and appears to have been the cause for my battery drain.  After performing these steps, everything is back to normal.  Good luck!

    Super frustrating, I know.  Do you use Exchange Active Sync?
    If so, you might be having the same issue that I've explained.  Since making the adjustments (clearing the data from the Active Sync components like mail, contacts and calendar), my battery life is back to normal.
    Try clearing the data (see first post in this thread) and let me know what happens.

  • Exchange Active Sync using UAG 2010 SP1 Event ID 14

    I'm trying to find out what these mean. I have a few users, usually with a iPhone, that will get periodically prompted for credentials with their Exchange Active Sync account.
    In the application log on the UAG I see quite a few of the following:
    LogName: Application
    Source: Microsoft Forefront UAG
    Event ID: 14
    Logged 2/1/2012 6:04:43 AM
    Task Category: None
    Keywords: Classic
    Computer: CACUAG01
    I removed the domain and user name to protect the innocent. Can someone explain what causes these?
    "User domain\username with source IP address 
    failed to log into trunk exchangeactivesync (secure=1) using authentication server MSAD with session ID 6E0357C8-7196-4A30-9FD3-613839303E6A. Error code is Invalid Credentials."

    Have a very similar issue...
    Searched online for clues but none found.
    Further investigation and found out this particular user had changed his network password about a week earlier.  Had not checked messages on the mobile device since, but when checked was showing an error.  Had to reset the password on the mobile
    device and the errors stopped.
    the actual error (event id 14) on the UAG Server is listed below.
    User xxxx\xxxxx with source IP address  failed to log into trunk brsite (secure=1) using authentication server xxxxx with session ID 55DxxB50-C3FC-4Exx-8732-AFFxxxxEB655. Error code is Logon failure: unknown user name or bad password.
    Dave

  • No matter where I go, as soon as I turn on the Internet on my new Mac Book Pro, everyone else is no longer able to use the Internet. How can I fix this?

    No matter where I go, as soon as I turn on the Internet on my new Mac Book Pro, everyone else is no longer able to use the Internet. How can I fix this? I received it as a gift for college, but its hard to do research when everyone constantly yells at me to get off because they can no longer continue what they're doing.
    <Edited By Host>

    " how can I sync my iphone to my mac book without losing all the music and pictures on it?"
    You cannot.  Copy everything you want form the old computer to the new one, then sync it.
    it basically says you have to erase your iphone to sync to a new itunes!
    Correct Iphone will sync, or manually manage, with one and only one computer/library at a time. Syncing, or manually managing, to another will indeed erase the current content.

  • In camera raw, I am no longer able to use the adjustment brush.  This is a recent phenomenon.?

    In camera raw, I am no longer able to use the adjustment brush.  This is a recent phenomenon.

    Well, it worked fine for me as well for the past couple of years. I had not had any problems using it for the past few years. I use a Mac OS X Yosemite.  As far as I can tell nothing had changed. I had not added any new updates, and a week ago the adjustment brush in camera raw simply ceased working. Everything else in camera raw works.  However, the adjustment brush is a critical tool. I have checked my permissions, and even repaired my permissions with no results.  Of course I have also tried several restarts to no avail.

  • I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer?

    I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer? I was using Explorer 11 and Windows 7, installed on an HP Pavilion g series

    Never heard of that being caused by installing iTunes. Try asking on a Windows forum. This isn't a problem with iTunes or any other Apple product. If you believe it is, uninstall iTunes. If the problem persists, you'll have to seek advice on a Windows forum or contact Microsoft for support.

  • After loading Lion 10.7 I'm no longer able to use Quicken 07. Any work around?

    After loading Lion 10.7 to my Desk Top, I'm no longer able to use my Quicken 07. Is there a work around? All my financial records are in Quicken 07 or do I need to remove Lion 10.7 from my computer

    Quicken is a PPC application. They will not work in Lion because Lion no longer supports Rosetta emulation.
    1. You can downgrade to Snow Leopard.
    2. You can switch to Quicken Essentials.
    3. You can purchase a different application that provides similar services for you. Examples are MoneyDance or MYOB.
    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard. I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.

  • After Firefox updated last night, I am no longer able to use it. "Unable to connect" I have added it back through the firewall, nothing works. Help!

    Starting last night, after an update, I am no longer able to use Firefox.
    "Problem loading page"
    "Unable to connect"
    Unable to connect"
    Firefox can't establish a connection to the server at.....
    I have tried various things, even uninstalled and re-installed, took it out of the firewall, and added it back in. But nothing is working.
    Please help!
    Thank You
    Mara

    Hello Mara, see if the next is helpful : [https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can Firefox can't load websites but other browsers can]
    also, try to boot the computer in [http://windows.microsoft.com/en-hk/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows Safe mode with network support] (press F8 on the boot screen) and check firefox again.
    (If works in Windows Safe mode then probably you have problem with other software, like security software or maybe a system driver, that is running on your computer).
    thank you

  • Why am I no longer able to use my Logitech keyboard since the software upgrade y'day?

    Why am I no longer able to use my Logitech keyboard since the software update last night? 

    Hey atinaaw,
    I would first suggest uninstalling the software that is already on your computer for the printer. I have included the document 'Uninstalling the Printer Software'. Please choose the option for Windows 8, as it will be the same steps for Windows 8.1.
    After the uninstall is completed. Please download and run the Printer Install Wizard. This will make sure that you do get the most current and compatible software for your computer, and printer.
    Please let me know if you are able to install, and use your printer successfully, thank you.
    I worked on behalf of HP

  • I'm no longer able to use the projector VPL-ES4 with win7, he accuses error frequency

    I'm no longer able to use the projector VPL-ES4 with win7, he accuses error frequency.
    Working at a university here in Brazil Unicamp.
    Here we have several projectors model VPL-ES4, we were using this projector with win7 however a few days they all stopped to show the image of computers accusing problem in frequency, we made all the alternatives so that One can be reestablished TRANSMISSION signal however all were in vain, reading in many forums found equal to our cases and the solution presented was to use a computer with win98 and it really worked, but with the end of support for this version of the system we are failing to use it, I wonder how we can solve this problem and why even this ocrrendo.
    I thank you in advance for help and attention
    Rafael Marques

    archie0 wrote:
    Yes. NVIDIA+CRT+VGA cable = bad EDID.
    Here's what you can do. Fully remove the xorg.conf file. Regenerate them using nvidia-xconfig, Open the nvidia's GUI as root and just click "Save configuration", or something among those lines. Google your monitor's manual and find the RIGHT vertical and horizontal sync frequency ranges. After setting them in your xorg.conf log-out and log-in again. Go to the nvidia settings gui, you should be able to use a higher resolution.
    I've tried this a few times, but always end up with a "Signal out of range".  I think the trick is finding the correct ranges.  My monitor is a Soyo Topaz S 24", and I can't find any official manual or specs online.  What I have found is this:
    http://www.thinkcomputers.org/old/index … ews&id=733
    That review indicates:
    Frequency: Fh: 30 kHz - 80 kHz; Fv: 50 Hz - 75 Hz
    So I set:
    HorizSync 30-80
    VertRefresh 50-75
    Signal out of range, which is annoying because in order to fix it I either have to reboot using a live CD, mount the drive, or ssh into it.  Whoever started the trend of disabling ctl alt backspace to kill an xsession is not my friend...
    Some other forum posts about this monitor indicate that there may have been two variants, but I can't find a different set of specs.
    Last edited by vor_lord (2012-09-25 05:48:24)

  • I;m no longer able to use the Penn State ANGEL system (I teach on line) for my email and intead get messages about "script" problems.

    Question
    I'm no longer able to use the Penn State ANGEL system (I teach on line) for my email and instead get messages about "script" problems

    I have asked a moderator to provide assistance, they will post an invite on this thread.
    They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
    Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
    Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
    For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
    They will respond either by phone or e-mail within 5-6 working days.
    Please use the tracked e-mail, to reply, not via the forum. Thanks
    This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
    When you submit the form, you will receive an enquiry number, so please keep a note of it
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

    1. HP Pavilion dm4 XO132AV
    2. Windows 7 64-bit
    3. No error message
    4. No changes were made prior to when the issue occured
    5. Question: I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp50501-51000/sp50856.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, restart the notebook and let Windows fully load.  Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Please help...When I use the Iris enhance, i'm no longer able to use the sharpness,saturation,clarity,tone +tint feature.  It seems to be fixed.

    Never mind,found it!  Duh!  Lol

    When I use the Iris enhance i'm no longer able to use clarity,saturation,tone,tint etc... why?
    Why not? The Iris Enhance Preset sets the brush to Exposure +0.35, Clarity +10 and Saturation +40. If you want additional adjustments on the same brush or different values for the three preset parameters, just move the sliders.

  • Question... When I use the Iris enhance i'm no longer able to use clarity,saturation,tone,tint etc... why?

    How do I correct this, or am I due for an upgrade?

    When I use the Iris enhance i'm no longer able to use clarity,saturation,tone,tint etc... why?
    Why not? The Iris Enhance Preset sets the brush to Exposure +0.35, Clarity +10 and Saturation +40. If you want additional adjustments on the same brush or different values for the three preset parameters, just move the sliders.

  • HT3669 After applying HT3669, my HP LaserJet Professional P1100+ no longer able to use manual duplex.

    After applying HT3669, my HP LaserJet Professional P1100+ no longer able to use manual duplex.
    iMac C2D, Snow Leopard
    HP LaserJet Professional P1100+
    The alert box is suppressed in the warning printing queue instead of an Alert Box with [OK] to press.

    Hi , Thanks for posting in the HP Forums, and welcome.  I understand you are having an issue selecting the manual duplex print setting for your HP LaserJet Pro M1217nfw printer on your Mac computer running 10.10. I'd love to help you with this. Firstly, do you have the most recent HP Printer driver update installed? If not you can download it from the App Store here - HP Printer Drivers v3.1 for OS X Then, I'd recommend removing and re-adding your printer, to make sure you are using the correct driver (10.10 will often default to using an AirPrint driver which does not have a manual duplexing option). Click the Apple icon on your menu bar.Select System Preferences, then Printers and Scanners.Select your M1217 and click the (-) button to remove it.Press the (+), and then select Add Printer or Scanner. (NOTE: You don't want to add the printer as a "nearby printer" even if it is listed there)Select your printer from the list of available printers that loads.Make sure under "Use:" that it lists the printer name (not AirPrint), then select Add.Try printing your document(s) again.Please respond to let me know if we've resolved this issue!Good luck.

Maybe you are looking for