I am no longer getting error messages in iTunes on the computer

I am getting an iTunes Sync error on my phone. It says to see iTunes for more information. In the past I would get a box with more info. The latest update there is nothing in iTunes. What gives?

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Similar Messages

I get this message when i start the computer :" error : unable to start the bluetooth stack service"

i get this message when i start the computer :" error : unable to start the bluetooth stack service"

If a power cycle of the TC works then the issue is simply Lion.. and there is as yet no fix.. and may never be..
Apple do not seem to acknowledge the issue but plenty of people have it.. It doesn't happen with SL.. one very good reason to not bother with Lion.. Maybe ML will fix it.. without Apple having to ever admit an issue.
In the meantime, if possible downgrade TC to 7.5.2 .. it has less issues than 7.6 or later.
Reset the TC and change all names, TC and wireless names, to short, no spaces, no special characters.
If it is the main router, set the dhcp lease to a short time.. 10min I recommend.
The above will probably not fix the issue.. but it might go a bit longer before a reboot is needed.. going back to SL would fix it.

I downloaded Firefox 4 onto my PowerPC G4 1.67GHz running Mac OSX 10.5.6. When I try to open it I get error message You cannot open the application "Firefox" because it is not supported on this architecture. I can't find my Firefox 3.6.16 I'm on Safari.

I just want to download Firefox 3.6 again
I downloaded Firefox 4 onto my PowerPC G4, 1.67GHz running Mac OSX 10.5.6. When I try to open it I get error message You cannot open the application “Firefox” because it is not supported on this architecture.

Use Tony's suggestion. I am running it right now and it is awesome. I love Mozilla but they basically screwed all of those older Macs over. Come on Mozilla. These Macs still work, and there are plenty of people with them out there.

I can't open PSE. Get error message 150:30 and restarting computer doesn't help. Any suggestions?

I can't open PSE. Get error message 150:30 and restarting computer doesn't help. Any suggestions?

Please try out the instructions mentioned in this article.
Thanks!!

I want to reinstall our Adobe Acrobat XI Pro because we have begun to get error messages. I followed the initial instructions but when I logged in I couldn't find "My Orders" page which is required to locate my order and install. Any ideas?

I want to reinstall our Adobe Acrobat XI Pro because we have begun to get error messages. I followed the initial instructions but when I logged in I couldn't find "My Orders" page which is required to locate my order and install. Any ideas?

Barbara,
If you are looking for your serial number, sign in to your Adobe account. On the Manage Accounts page that appears, all of your registered products and their serial numbers are listed in the Plans & Products section. For more information on locating serial numbers,please see Find a serial number
Here is the link to download and install the software:
Acrobat XI, X
Pattie

On mac yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014)

Need help-
On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????

Thank you station_two but I did install them in my
applications>adobe>presets>brushes and still I get this error message......
On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]>

I am getting error message A12E5 when installing the free 30 day trial for InDesign why?

I am getting error message A12E5 when installing the free 30 day trial for inDesign...don't know why?

don't know why?
Neitehr do we. You are not offering any relevant technical info like what computer you are actually on or the exact error message.
Mylenium

Hi Guys When trying trying to install latest version of Apple software I'm getting error message that Itunes has not been properly installed which is strange as i have been using it no later than yesterday Jan. 24th 2014. can anyone help please?

Hi Guys When trying to install latest version of Apple software I'm getting error message that Itunes has not been properly installed which is strange as I played ' Take Five' two days ago. Can anyone help please?
Jim Houston

Please see this post by turingtest2:

When i try to open indesign i get error #5. i've rebooted the computer but still get it... any idea?

when i try to open indesign i get error #5. i've rebooted the computer but still get it... any idea?

Music purchased on ipad wont play on computer. I get a message which says that the computer is not authorised to play the track but when I enter the password I get the message saying that the computer is already authorised. I have the opposite problem tra

Music purchased on ipad wont play on computer. I get a message which says that the computer is not authorised to play the track but when I enter the password I get the message saying that the computer is already authorised. I have the opposite problem transfering some but not all music from computer to ipad. Can anyone help?

Interesting. Maybe it is more of a DRM issue than an Apple ID ownership issue. There is actually an iTunes Support section here on the discussion boards. If you wish to continue troubleshooting, you might post your question over there and refer to this discussion thread. You can also contact someone in Apple iTunes Support.

HT203687 Trying to install iCloud on a new Toshiba laptop so I can sync with my iPad and iPhone. I get error message HRRESULT:OX8007OBC9, says the installer encountered errors before iCloud Control Panel 2.0 could be installed. Same problem trying to inst

Trying to instll iCloud on a new Toshiba laptop so I can sync contacts, calendars, email with my iPhone and iPad. Get error message HRRESULT:OX8007OBC9, says installer encountered errors before iCloud Control Panel 2.0 could be configured. Have the same problem trying to istall iTunes.

Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

Since upgrading to FF 4, I have constant crashes (updating graphics drivers did not help). now all my bookmarks are gone. When I try to restore them, I get error message: "Unable to process the backup file".

Since I "upgraded" to FF 4, I have constant crashes (I tried updating my graphics drivers--it did not help) and now all of my bookmarks have disappeared. When I try to restore them, I get this error message "Unable to process the backup file". I have lost years of bookmarks...please help.
I am using Windows XP, SP 3 if that matters.

I am also unable to restore any of the backups of the bookmarks, both automatic backups and two backups that I created manually. Since I was able to restore backups before, and since no changes have occurred to these backup files, the problem must be with Firefox.
Right before my bookmarks disappeared, FF crashed and I accidentally started FF 3.5. When I saw what I did, I ended the Firefox process and started FF 4. That's when all my bookmarks were gone and I discovered I couldn't retrieve any backups. I did note that an add-on was updated when I restarted FF. Maybe that's the problem. Does FF have a Safe mode?

HT201274 I am not able to restore my iphone 3G, After about 70% of the restore i am getting error message could not restore the device

Dear friends,
My iphone 3G is not working when I power on the phone I am getting a USB symbol and at top shows itunes. I tried with itunes to restore the and update the software,but about after 70% of the3 reestore amd getting error message couldnot restore the device, due to some error. Is there any solution for this problem. Please help me to solve this problem.
Thanks,
Chirackal

Make sure you switch off anti-virus and firewall, then try again.

Get error message after trying all the fixes

My hp psc 1315 all-in-one worked fine until today..trying to scan a doc got this error message --
An unexpected error has occurred. Check OK to close program, and then try the following:
--restart the program
--restart the PC and then try again
--reinstall the Photo and Imaging software and try again
I tried all these - and downloaded new software after uninstall of old.
Still getting error message -- any suggestions please?
Thanks in advance.

Hello golden1, and thanks for the reponse!
I would suggest following the steps laid out in this document: An Unexpected Internal Error Has Occurred which is found on http://hpanswers.blogspot.ca.
Step 1:
-In C:\Windows folder, look for "Twain_32", which should be there. Also, look for a folder called "Twain32". If this folder exists, it will be empty. Copy and paste the contents of "Twain_32" into "Twain32".
Step 2:
- In "Services" (to access Services, Go to Start, then Run. Type services.msc and hit enter. Make sure the service named Remote Procedure Call is Started.
- Go to Shell Hardware Detection, right click, and select properties.
- Set the Startup Type as Manual and hit Apply. Then you should be able to Start the service by hitting Start.
- Try to scan using the software. If you are unable to scan, try uninstalling and reinstalling the printer software.
Step 3:
If you if you are using downloaded software instead of the printer CD:
-Go to the Start menu, and go to Run. Then type %temp% and hit Enter.
-Locate the correct folder starting with "7z" (the correct folder contains "Util" and "CCC" folders).
-Open folder "Util".
- Open folder "CCC".
- Please run the L3uninstall.bat.
- When the uninstall has completed, restart the computer.
- Run Disk cleanup in "System Tools"
- Download and install the latest version of Adobe flash player: http://get.adobe.com/flashplayer/
- Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
- Rename the twain_32 folder "twain_old".
- Restart computer.
- Download printer software and reinstall.
If you are using the printer software disc, follow these steps instead of downloaded software:
- Go to the Start menu, and go to Computer.
- Double-click on the icon for the HP printer CD.
- Open folder "Util".
- Open folder "CCC".
- Please run the L3uninstall.bat.
- When the uninstall has completed, restart the computer.
- Run Disk cleanup in "System Tools"
- Download and install the latest version of Adobe flash player: http://get.adobe.com/flashplayer/
- Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
- Rename the twain_32 folder "twain_old".
- Restart computer
- Delete everything in the Twain_32 folder, except "wiatwain.ds" (if anything).
- Rename the twain_32 folder "twain_old".
- Restart computer.
- Download printer software and reinstall.
Step 4:
- Download an updated twain_32.dll file and place it in C:\Windows>twain_32. Replace the new file with the old.
Step 5:
- Perform a system restore, if the issue occurred recently. Be sure that you select a restore point dated before the issue occurred. You can reference this document on how to do a system restore: http://windows.microsoft.com/en-CA/windows7/products/features/system-restore
If none of these steps do not resolve the issue, I 2would suggest you re-format the computer.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

TS1717 Having problems lauching iTunes on my pc, dowloaded new version, getting error message that iTunes is not installed correctly or corrupted, reinstall. I'm afraid I will loose everything,tried to back up to earlier date,system diognosis said incompa

Having problems launching iTunes on my pc. Had iTunes on this particular pc for over a year. Have downloaded all of the new updated versions. Now I get an error message saying "This copy of iTunes is corrupted or is not installed correctly. Please reinstall." I have backed up the pc to an earlier date when when the program was working, and also performed serveral system diagnosis all saying the program is incompatible. Searched for several compatible programs, none worked. All this happened several days after visiting iTunes. I'm afraid that if I reinstall iTunes that I will loose everything and have to start all over. Eventhough everything is saved in an iCloud account and this particular pc. Never had a problem till now. Appreciate any help. Thank you, cld

Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now?

I am no longer getting error messages in iTunes on the computer

Similar Messages

Maybe you are looking for