I am not able Activating the DSO

Hi BW guru`s,
I have a problem with standard DSO. I have loaded Transactional Data from Flat File (CSV) to Standard DSO. After loading data I have been trying to Activating the DSO, but I could not able to activate. I could able see the data in NEW Data table. when I am trying to activate, the request ID could turned into red. I do not know why I am getting this error.
These are the Characteristics (National Customer, Sales Organization, Brand, Calyear) and Keyfigures (Sales, Volume) which I used in DSO.
Does anybody help in this and I will assign some good points.
It is urgent.
Thanks,
Venkat
Edited by: VENKAT BOORUGADDA on Aug 1, 2008 9:20 AM

Hello Venkat,
It generally happens......If u have run InfoPackage several time...such error is expected...
Do one thing.....just log out and Log in once again...
Schedule ur load thr' Infopackage....
It will definitely help.....
And yes when you will activate particular request....click the option below the activate button........"dont condense the request...."
Hope this helps........Rewardd if helps
Thanks,
Sonu

Similar Messages

Issue related with the Date Format --- error when activating the DSO

Hi Friends..
plz help me to fix the issue ...im getting when activating the DSO...
Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..
is there any routine to solve this or i have to go for data selection in info package ......
I have searched in the forum also..but im not able to fix..plz help
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT*
Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE*
Value '20101502' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZDUEDAT*
Value '20101402' of characteristic 0DATE is not plausible
Thanks
Baskar
Edited by: tjgnanabaskar on Aug 6, 2010 5:35 PM

Hi Friends..
plz help me to fix the issue ...im getting when activating the DSO...Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..is there any routine to solve this or i have to go for data selection in info package ......I have searched in the forum also..but im not able to fix..plz help
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT
Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE
Value '20101502' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT
Value '31122009' of characteristic 0DATE is not plausible
Thanks
Baskar

Problem while activating the DSO

Hi-
I have some invalid characters in the reference document number which is causing not to activate the DSO. I found the document numbers which is causing the problem. They are not more than 2, so I thought to put a filter in the DTP. It is not allowing me to exclude the document numbers in DTP. It is only allowing me to keep the single values.
Please let me know how to exclude the affected document numbers so that my DSO gets activated.
This is a production issue and please get back to me with ur suggestions.

Hi n p,
In DTP screen at filter>mutlipule selection>exclude single values-->multiple selction..you can check the seleted the values to which you want to exclude them into filter.
Hope this help you
Thanks,
Praveena.

Not able pass the data from component to other component.

Hello All
I am not able pass the data from component to other component.
I have done like this.
1 Main Component (Parent component ) having below two child components.Embeded as used components.
2)     Search Component and Details Component
3)     In the Search Component having buttons, Say : Button u201CXu201D on click of button I am navigating to Details component view through FPM.
4)     When I am clicking above button u201CXu201D raising the event to call the parent   business logic method, there I am getting Structure with values and binded this structure to the node and Mapped this node to the Details component interface node. FYI : I kept the debugging point Structure is having data , I had set static attributes table to node instance.
5)     In the Details component node data is not coming mean empty.
Thanks in Advance.
Br-
CW
Edited by: CarlinWilliams on Jul 4, 2011 9:21 AM

Hi,
When you use input Ext. check that the parent component should not be used as used component in child component.
Only in the parent component the child components should be used as used components and the usage has to be created for the
Child Components and the binding of the Node should be done from comp. controller of parent component to child node
by which you will be able to see double arrow against the node.This should work
Thanks,
Shailaja Ainala.

Data is not uploaded from the dso to the cube

Dear Experts,
In one of my process chains the data is not uploaded from the dso to the cube .
I have tried to upload the data month wise also but still after certain data records the data gets stuck up.
I have recreated the indexes also.
When I am checking in DB02 the table space is shown as 18491 MB.The used space is 97%.
Please suggest.

Hi.....
I didn't get your point........what have you mention that you have recreated the index before loading....
Basically.the process should be........Delete index --> Load --> Create index......
You have mentioned that 97% of the memory space is in use........please check with the basis team once......
Also, in SM37 check if any such job is there which is running for a long time but not progressing......or which you think you don't need......then kill that job......
Regards,
Debjani.....

SID Generation Error while activating the DSO.

Hello Gurus,
Am trying to load the data to a dso in FIGL, the data is getting loaded to the dso very fine, this is extracting data of 1700000. But the problem is while activating the dso it throws an error "Activation of M records from DataStore object.
In dump error, DBIF_RSQL_SQL_ERROR
CX_SY_OPEN_SQL_DB
SQL error in the database when accessing a table.
So please advice me to solve this problem would be appreciated and reward points.
Arun

Hello Arun kumar,
That's easy you have errors in the field 0REF_KEY3.
Since it is a DSO it let's you load everything but in the time of the activation it complains!
The system is trying to generate a new SID for the master data of the InfoObject 0REF_KEY3 with that value (or values) and since it has garbage on it (invalid characters like "!", etc.) it gives you that short dump.
Try to find that record, change it in PSA and reload the request again.
TCode-E3//Rec.Typ-CO
The system don't like that string for generating the SID. Try to eliminate "//" and "." from it. (for test purposes you can simple change it to nothing and see if it passes the load and activate again)
Try to see if you have more records like those and fix them too.
That should work.
Please assign points if it helps,
Diogo.

Added fields not appearing in the DSO transformations.

Hi,
I have added three new info objects into data fields in the DSO then activated and not appearing added fields in the transformations.
Please suggest me,
regards,
Jayapal.

Hi Jayapal,
i dont know whether it would help you...you can give a try on it.
Instead of deleting the Transformation, just delete the mappings if any in the transformation.
Goto DS->Fields Tab-->In the Column Template info Object. Try mapping corresponding IO with the Source IO.
Then it will show a pop up give Copy . Activate the DS.
Goto Info Provider>Select the Transformation> If it is active-->reactivate it by clicking the Pencil Icon with glass and click activate icon.
If its not active, then reactivate it again by clicking the Pencil Icon with glass.
Let me know if it Works... Cheers
Regards,
Syed
Edited by: shameer83in on Nov 20, 2009 12:10 PM

Data not appearing in the DSO

Hi experts,
Based on requirement i have enhanced the DSO already exsisting in production system with new infoobjects and enhanced the required fileds in datasource level also and transported to production sysem.I have made certain changes in report level also by taking the newly added infoobjects and transported in production system successfully.
My question is when i am going to execute the report it is showing there is no applicable data found.
We donot have the data at source system level for the new infoobjects but the data is present for the previously exsisting infoobjects. when data is exsisting for the old infoobjects which were exsisting before i made the changes to the dso then why the report is not fetching any data from the dso.
Note :- The DSO is exsisting in active stage only and data is present for the old info objects also.
please clarify my question.
thanks and regards
pedamarla

Hi,
It could be possible that there are no records for the set of restrictions you are using in Report.
Try to LISTCUBE your query on that DSO. Use same selections in listcube.
Check the selections and conditions used in Query and then probably you can conclude the issue.
Regards,
Pratap sone

Not able activate the interface

Hi All,
I have created the form in SFP T-code. While activating i am getting dialog box with
========================
SAP Logon data
Enter Your user name and ID
Resource    [   ]
User name [   ]
Password    [   ]
========================
Here i entered my log on info, its not accepted..
At last sap thrown a message like
SSOAP Frame Work error: SOAP Runtime Exception: CSoapExceptionTransprt:HTTP send returned with status code(100.101).
So i am not able to move further..
May know how to resolve this issue
Thanks
Ram

Hi
Go to t-code SM59 and check that you have a RFC connection under "connections to external servers". If you dont then do the following:
1. Log on to your SAP Web AS central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
        RFC destination: ADS
        Connection type: G
        Description: <your description>
5. Choose ENTER
6. Choose the Technical settings tab and enter at least the following:
Target Host
Enter the host name of the J2EE Engine that runs the Adobe document services or of the SAP Web dispatcher if applicable.
Service No
Enter the HTTP port number of the Target Host you have specified (The following naming convention applies:
        5<J2EE_instance_number>00 (50000, for example, if your J2EE instance is 00).
        Path Prefix
        Enter exactly the string /AdobeDocumentServices/Config?style=rpc
        (A warning is displayed: Query String Not Allowed. Ignore this warning by pressing Enter. )
7. Choose the Logon/Security tab, select Basic Authentication.
8. In the User and Password boxes, enter the user name ADSUser and the password.
9. Save your settings.
10. Choose Test Connection.
11. A screen is displayed. The field status_reason: OK indicates that the test was successful.
Regards
Thashin

Not able save the mapping after writing the 4th UDF (in PI 7.1)

Hi All,
After writing the 4th UDF i am not able to save the mapping in PI 7.1, i am getting the following error "the length 3 of the array 'sortedFunctionKeys' is not equal to the number 4 of functions".
Please let me know how to overcome this
Regards
Vinay P

can you check the syntax of the UDF?
seems there is some issue in it.
Also sortedFunctionKeys is this part of the UDF? then make sure the logic is correct behind the code.

Sharepoint 2013 performance is very slow not able develop the custom solution.

hi this is goutham i am facing performance issues and version issue when i develop webparts and visual studio workflow on SharePoint 2013, even if i change the code also some times the output showing previous code output and i am not able to debug
the solution.
My system having very high configuration i7 processor and 16 GB Ram.
can you please give any solution for my problem.

Hi Goutham,
You have not given enough information about your issue and environment, so it is bit tough to suggest you a solution.
here are few things you can try out -
1. See how much free memory you have in your server
2. If your SQL server installation in on the same server, then allocate some % of memory to it, that is set an upper limit of memory usage to SQL Server
http://technet.microsoft.com/en-us/library/ms178067.aspx
http://support.microsoft.com/kb/321363/en-us
3. Use developer dashboard to see why your code has performance issue
http://blah.winsmarts.com/2012-7-SharePoint_2013_Developer_dashboard.aspx
4. Use Fiddler to check the application call to your server
http://www.telerik.com/fiddler
5. Check whether there is memory leak and dispose objects whenever required
6. If you have your environment setup for development, then stop services that you are not using, this would free up some resources
7. use ULS log viewer to analyze SharePoint logs
You might be seeing the same code(assumption of your code after deployment), that may be because you may have not published your app to SP server or your code was not saved by VS.
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

I could not able move the table in physical diagram

hi all
i have installed obiee..
there am trying to give physical joins .... there am facing problem that i could not able to move the tables
wat is the problemmm...
please help me out
thanks

are you opening a physical diagram to create joins? You mean drag and drop does not work while rearranging a table in physical layer?

Not able find the constraint in the Database

When I am trying to udpating a table I am getting error like
ORA-00001: unique constraint (IRP_DXX.SECURITY_UK) violated
ORA-06512: at "IRP_DXX.AU_COMPANY_ABBREVIATION_TR", line 20
ORA-04088: error during execution of trigger 'IRP_DXX.AU_COMPANY_ABBREVIATION_TR'
When I try to query for the constraint name in the all_cons_columns table, I am not able to find the constraint
select * from all_cons_columns
where constraint_name = 'SECURITY_UK';
no rows selected.
Can anybody help in finding what may be the issue here?

yes this is the name of a Unique constraint on a particular column. Thanks for the pick. Its strange for me.
Hence, we can impose unique constraint on a column without actully creation a unique constraint, but indirectly by create a UNIQUE INDEX on the column.
Is my understand right?

Not able open the ESR

Hi All,
When the first time i am trying to open the ESR it has shown a popup like 'Downloading File'.After the files are sucessfully downloaded i waited for long time, But its doesn't opened. And i didnt get any errors. Still i am not able to open the ESR in my system even it not showing any errors.
(Java is already installed with latest)
Could any one please suggest me in this issue.
Thanks
Swetha.

pavan Kumar ,
Plz maintain the below settings shown on the link ..
http://wiki.scn.sap.com/wiki/display/XI/Troubleshooting+PI+ESR+and+Integration+Builder+Logon+Issues
after executing the below mentioned steps:
>>Go to HOME Page<http://Hostname:partno/dir/start/index.jsp>
>> select Administration(click Bottom) -->
see the below screenshot and
>>click on 'repository' then go to Java Web Start Administration tab on the left pane-->
>>click Restore Achives Bottom ...
Mutti

Not able run the report in PDF format

hi
I'm using Report Builder 9.0.4.0.33 (10g). I'm able to generate salry slip for 1 emplyee,2 or 3 in pdf format but when it is more than 1000, in pdf format only
it gives following error
REP-1922: Internal error
REP-50125: Caught exception: java.io.FileNotFoundException: C:\DOCUME~1\VISHWA~1\LOCALS~1\Temp\cmp04501596 (The process cannot access the file because it is being used by another process)
REP-1922: PDF compression error
REP-1922: PDF compression error
But its running correctly in paper layout for 1000 employee.
please help me
tanks in advance

Hi,
Whether you can able to get the output in the remaining destinations like html,rtf,etc ?. Let's try with PDFCOMP=0 in the commandline and generate the report. This is could be a possible workaround . Please update me on the result.
For information on PDFCOMP, have a look at the section 'CommandLine Keywords' in the document 'Publishing Reports Manual' ( http://download.oracle.com/docs/pdf/B14048_01.pdf).
Thanks,
Vidya

I am not able Activating the DSO

Similar Messages

Maybe you are looking for