I am not able to call or receive call from Iphone 4 when 3G is on
I am facing a problem from the day 1...somtimes, i can't call or receive call from my IPhone 4 when 3G services are on.
That looks like a cellular data issue, which can be resolved by contacting your phone carrier.
Similar Messages
-
Some time i am not able to call from iphone 6
Some time i am not able to call from iphone 6 i have already talked with with my serviceprovider but they not able to find any problem.fom yesterday my outgoing has been stopped again
Please give me a reply.last 24 hrs i am not able to call anyone from my phone
-
Not able to call from the UAE.
hi there ....
I am calling from UAE. i have purchased india 800min pack but i am not able to call. Call connects very rarely and whenever it does so it drops automatically after 2-3 secs. Plz help me out.
Regards,
Solved!
Go to Solution.Hello,
It has been brought to our attention that our website has been blocked by one or more ISPs in the United Arab Emirates. Unfortunately there is very little Skype can do about this situation. The best course of action would be for you to speak to your ISP, ask why they are blocking Skype and request that they unblock our site.
Thank you.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you. -
Not able to call from India but I have credit
I m not able to call to any landline and mobile still I have Skype credit and 120 min subscription plz help me
lakhanpandey wrote:
I m not able to call to any landline and mobile still I have Skype credit and 120 min subscription plz help me
Hello
You are attempting to call within India which is no longer supported by Skype.
https://support.skype.com/en/faq/FA34487/why-can-i-no-longer-make-calls-to-india-from-india
p.s. You were flagged for duplicate posting which is not permitted. Please avoid in future. Duplicate post removed.
Thank you.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you. -
I can send and receive to any non iPhone user. I can send a message as a text to an iPhone user but if I'm not connected to cellular data or wifi I do not receive messages from iPhone contacts. From what I understand these message should automatically send to me as texts instead of iMessages but since the update it's not functioning properly. Please help. I've tried turning iMessage off and I still don't receive the messages until after I reconnect to wifi.
I have the same problem! Before the upgrade, if I wasn't connected to the internet, any messages sent to me from an iphone would convert automatically to a text message. I have payg tarriff, so I turn cell data off, as it costs too much to use it. I have wifi at home and work, but if I'm out and about, I don't receive texts from iphone users until I'm on wifi. I get them ok from non iphone users. There was never any problem until ios7
-
IMac FaceTime not making/accepting calls from iPhone
I have Yosemite installed on my iMac, and IOS 8.1 on my iPhone 6. FaceTime on both are set to receive/make cell phone calls. Both are on the same WiFi.
When the iPhone rings, a dialogue box appears on the iMac for me to click Accept or Reject. If you Accept the call, it disconnects. Similarly, if you want to make a call (through any of the several methods), a dialogue box appears momentarily showing the call, then another dialogue box appears saying "Try Again".
Any suggestions?FaceTime Troubleshooting
IOS
FaceTime Troubleshooting
FaceTime Troubleshooting (2)
FaceTime Troubleshooting (3)
FaceTime Troubleshooting (4)
FaceTime Troubleshooting (5) -
Since I've had the motox, almost 4 months, I have been unable to receive MMS messaged from any iphone users when they send a text and a picture together.
Messages from the 4s and 5 don't come in (not tested with other versions)
I can view the picture if I download the attachment but can't view as a slideshow or if I forward it to myself.
I've tried clearing the cache, restarting, and deleting the contact on both ends. I do not want to use hangouts
Sorry if if this is a repeat. I couldn't figure out how to post in the existing thread.This is not that issue. I receive texts from iPhone users all the the time. This issue is with messages when pictures are coupled with text in the same message. Like this:
http://www.reddit.com/r/MotoX/comments/1ydhxi/problem_receiving_picture_message_mms_with_the/
And
https://community.verizonwireless.com/mobile/mobile-access.jspa#jive-content?content=%2Fapi%2Fcore%2Fv3%2Fcontents%2F1747938
I'm not alone with this. -
Still can't receive messages from Iphone Users
Greetings,
I know there are many topics asking similar questions if it's googled, and I think I have read through almost all of them to no prevail. I know veterans of these boards probably get tired of seeing the same topics, but im desperate and will try to keep it quick. I really appreciate any help.
I recently upgraded from a 4S to a Galaxy S5 and have not been able to receive messages from Iphone users since. I still have my old Iphone. Here are the steps I've tried:
1) Ensure "IMessage" is disabled in my old phone
2) Unregistered my phone number with my Apple ID. I currently have no phone numbers registered with them
3) Changed my Apple ID Password
4) Unregistered my Iphone with my ITunes Account.
5) I also have a Macbook Air and a 2010 model IMac. I have also ensured I am signed out on those devices and my phone number isn't linked in anyway I could find.
6) I called Apple 3 Days ago and the representitive was very nice and professional but ultimately was incorrect. He advised me that the new IoS7 is more advanced and should check about every 12 hours to see if the user on the other end has an active IMessage account. He said to wait 24 hours just to be safe. He also advised people running older IOS systems could take up to 3-4 days to contact me correctly. Furthermore he said if after that time frame their phones still sent me IMessages instead of SMS then THEY were having problems and should call Apple. I just really doubt that is the case.
I have tested it out with 5 Iphones now with help from some friends, all running IOS7 and still no luck 3 days after the phone call to Apple.
7) I tried logging back into IMessage today on my Macbook and it worked, I was still able to send and receive texts from Iphone users. This seems like it should not be possible since it is not linked to my phone number anymore. It is logged into the same Email that I used to have linked to my phone number.
Now as others have said, If I have them hold down the bubble and send as text message 3 times their phone will remember and keep sending my texts, however that is unreasonable to ask everyone to do. There should just be a way to completely delete your Apple ID. Is there anything I'm possibly overlooking? I really appreciate any help.I am right there with you. This describes my problem to a T. Only other issue I am having is group texts. Iphone users who include me in a group text still send as imessages as well, so even if I text them first and they reply, it send as an imessage. Get it together apple.
-
Hello Guys! I hope someone could help me, Im having trouble with my phone's signal, I am not able to send and receive msgs, same as make calls and receive calls. At first, my phone is working fine (iphone 4, iOS 7.0.4) and all of a sudden, my text messages are not getting through, and I noticed that my phone shows NO SERVICE, I refreshed the phone by turning it off and turning it on after a couple of minutes, it worked. My phone is okay again after that, Im able to send and receive messages again. But after few hours, the problem came again. NO SERVICE sign is displayed again, but this time after refreshing the phone nothing good happened. I tried almost every possible thing I can to fix it but it doesn't work. What should I do.
Thank youHey Clara,
These are the recommended troubleshooting steps to resolve No Service issues on iPhone:
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Turn iPhone off and then on again.
Remove the SIM card and verify that it's a valid, carrier-manufactured SIM. Also verify that it isn't damaged, worn, or modified. Then reinsert it.
Check for a carrier-settings update. Connect to a Wi-Fi network. Then tap Settings > General > About. If an update is available, iOS will ask you if you want to install it. If Wi-Fi isn't available, connect your device to iTunes.
Update your iPhone to the latest version of iOS.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Restore the iPhone.
If you are outside the United States, please also follow these steps:
Go to Settings > Carrier > Automatic.
If the phone registers any carrier network, Settings > Carrier will be present.
If the Carrier option is missing in Settings and you are outside of the Unites States, please contact Apple for support and service options.
Set the option for Automatic to off.
A list of potentially available carriers appears after about two minutes. If the device is locked to a carrier, it may connect only to the carrier network to which it is locked. If the device displays carrier networks, then the device is working as expected.
Set Settings > Carrier > Automatic back to on.
If you're still experiencing No Service issues, contact your carrier to check for any network or account issues that could cause these symptoms.
from: iPhone: Troubleshooting No Service
http://support.apple.com/kb/TS4429
Welcome to Apple Support Communities!
Take care,
Delgadoh -
My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another. Is the cause of this because we share the same Apple ID? Will we have to set up 2 separate primary email addresses to be able to send and receive Tex Messages to one another? Like I said, we share the same email address and woul like to keep it that way to keep up with our email together. Is there a way to by-pass having to set up 2 primary emaill addresses if this is the problem?
Thanks.go to the settings and turn off imessage
but that don't change the issue that you will never be able to facetime eachtoher
the appleID is really meant as the handle that identify you it was not meant to be shared
but can see that people may want to do not buy apps more then once -
My tel Goes after 10 minutes offline, apears à enige Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1
Hi Richard,
You mentioned that 'Apple put the AirPrint spec out there for all printer makers'. I've been looking around but I haven't found any spec. Where did you find it?
Do printer makers have to buy a license in order to be able to advertise that they've implemented the AirPrint protocol? Is there maybe an Apple review process in place?
TIA
Geert -
My tel Goes after 10 minutes offline, apears à white Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1
Hi Richard,
You mentioned that 'Apple put the AirPrint spec out there for all printer makers'. I've been looking around but I haven't found any spec. Where did you find it?
Do printer makers have to buy a license in order to be able to advertise that they've implemented the AirPrint protocol? Is there maybe an Apple review process in place?
TIA
Geert -
When i make call from iphone,loudspeaker is being enabled automatically and not able to hear any sound ..
And some time it's worked...OMG.....this very tiny hole located next to the headset jack........I suffered for the same issue around 20 days after purchasing my iPhone 4S. Even I visit the apple store too, they suggested to talk with apple online.....just before going to apple, i was reading "iPhone: Hardware troubleshooting" (http://support.apple.com/kb/TS2802) and at the very first line, i found "Make sure that nothing is blocking the top microphone (located next to the headset jack)." and this located next to the headset jack solved the problem completely for sound in vidio as well as sound with calling speaker phone.....Actually, I purchased a plastic cover (like screen protector type) that blocked this small hole (microphone hole i think) and the problem was because of this...I remember on the first day i talk with speacker phone (nothing on iPhone at that time) and it was working...
No need to restore or hard reset anything...i was fearing i'll lost everything if I hard reset my iPhone that took 5-10 to build my iPhone as I like apps, music, vidio on it.... -
When i make call from iphone,loudspeaker is being enabled automatically and not able to hear any sound ..
reset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
if issue persists back up and restore as new via iTunes
Peace, Clyde -
Manage bean methods not able to call application module methods
Hi,
I have an ADF application where in my managed bean method needs to call AppModuleImpl methods. I use the code as below:
public void getSummary() {
DCBindingContainer binding = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
OperationBinding op = binding.getOperationBinding("getVOData");
op.execute();
The code works fine when I run the application in my IntegratedWeblogicServer and I am able to get the data on my .jsp pages.
I have installed weblogic server on another machine and I need to deploy and run my application on that server. But when I try doing that, the above code is not able to call the AppModule method and I see no data on my page (Also there is no error or exceptin thrown). Seems that the ViewController project is not able to interact with the Model project.
Is there any extra configuration to be done on the newly installed weblogic server to get this work? Or will some change in the application code help?
Please suggest.
Thanks and regards,
AnshHi,
While creating the weblogic domain, we had the following checkboxes checked:
1. Basic weblogic server domain [wlserver_10.3]
2. Oracle JRF [oracle_common]
I hope this is what we need.
Yes, I also have the adf runtime installed.
Maybe you are looking for
-
How can I open a PDF File and integrate it on my view?
Hi everybody, I try to solve the problem like this: - Creating a context attribute "pdf" type byte - Creating a view UI Element "MyPdf" type interactive form binding on the context attribute "pdf" - Inserting the following code in the wddoinit: IPriv
-
Hi, I can create a text box in InDesign CS4, but cannot get a cursor inside it to type text. This just happened because it worked before. It seems that InDesign works sometimes and at other times the same procedures do not work. I have windows XP Svc
-
Configuring Legal Entity as Operating Unit without creating new OU
Hi, I have read the doucment "120funmo.pdf" on page 25/60. Eastern operations can be created as Legal entity and identify as Operating Unit and Inventory organization without creating any new OU and INV. ORG. How this can be achieved? I have created
-
Webservice client generated from WSDL null entity problem
hi, I'am having a serious problem using the generation (data centric development) capability of Flash builder. I have a simple XSD and generated WSLD (from Spring Framework using JAXB). In this I have defined an UpdateRelatie function. It looks somet
-
I can longer find the airplay icon on my iPad when I double click the home icon. It worked fine and i used it for a couple of weeks to mirror with the Apple TV and then it mysteriously disappeared. Now when I double click and slide the icons at the b