I am not able to click on the installation options for CS2. All the boxes are gray. Help.

You can refer to the article:
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

Similar Messages

My phones imessege has not been working, it connects to my email but not my phone number it says its an option but its in grey and i am not able to click it as an option

i have a iphone 5 and my phones imessege has not been working, it connects to my email but not my phone number it says its an option but its in grey and i am not able to click it as an option

Depending on what iPhone you have when you get to the connect to wifi you should be able to activate your device over cellular data. Try doing a hard reset by holding the home circle button an power button until an apple pops up and the go through the setup again and when you get to the wifi part a option should be setup with cellular data iPhone 4 and above should give this option sometimes doesn't like showing up that's why u have to do a hard reset first

Why can't i post to a thread? (i am not able to click on the "reply" box)???

I would like to add a post to http://forums.hpwebos.com/t5/Windows-HotSync/64-Bit-Palm-Desktop-Drivers-are-HERE/m-p/337516/thread-..., but I cannot???
Operating system: Windows 7, 64bit
Error message: Unable to click on the "reply" box

Hello,
That support community uses a different login from the one here. You need to create a different account there.
MrMatthew - HP Support Forums Moderator
Click the Kudos star as a way to say "thank you" for helpful posts.
Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else.

I am not able to click on the installation options for CS2. Top green button is gray, and option boxes unclickable. Help!

I Am attempting to install CS2. I've been on live chat twice. they were very helpful. Now, however, I am unable to use the install options box. The top left green button is gray, so I am unable to click on the options. Therefore, I can't install the programs. What can I do?Creative SuitesDownloading, Installing, Setting Up

did you download the installation files here, Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

Firefox 4.0 looses the ability to back up through links after a few link clicks. The arrows are grayed out. Running Windows 7 pro.

Seems to occur when I have multiple tabs open.

Issues with the Back button not working properly can be caused by the McAfee SiteAdvisor extension.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Every time I try and open up my itunes it will get stuck on lode. I am not able to click on anything or close down the page. I have to restart my computer. I have a new ipod and can't even downlode my music or watch my movies! what is going on?

Every time I try and open up my itunes it will get stuck on lode. I am not able to click on anything or close down the page. I have to restart my computer. I have a new ipod and can't even get my music on it or watch my movies! what is going on?
A box will pop up and tell me there is a new version of itunes to download, but i'm un able to click on that either

Hi Coreenfrombc,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden

Why can i not see the time line and canvas? Also, why am i not able to click on them either?

I am not able to see the time line and canvas in the motion 5. Also i am not able to click on it either

Try selecting 'revert to original layout' in the window menu. If that doesn't help I would delete Motion preferences in ~/library/preferences/com.apple.motionapp.plist and com.apple.motionapp.LSSharedFileList.plist. You can also try deleting the layouts folder in ~/Library/Application Support//Motion. I assume that at some earlier time Motion was behaving properly. If this problem has occured when you first tried to open it after downloading then I'd reinstall it.

I am not able to click on anything in the top one inch of every browser page??

On page like facebook... I am not able to click on any links that are in the top one inch of the browser... including the main menu bar

Recently, the Yahoo Toolbar and the Babylon extension have been reported to cause that problem. They seem to overlap invisibly over the top of the web page display. If you have either or both, uninstall or disable them/it, or see if an update is available that solves the problem.
*See --> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*See --> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
*See --> http://kb.mozillazine.org/Uninstalling_toolbars
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*'''''Adobe Shockwave for Director Netscape plug-in''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

I upgraded my iphone 4 OS yesterday to ios 5, today morning my phone is not working, i am not able to click any button and also its not allowing me to switch off the phone and restart. Anyone having similar issues

i upgraded my iphone 4 OS yesterday to ios 5, today morning my phone is not working, i am not able to click any button and also its not allowing me to switch off the phone and restart. Anyone having similar issues?

From my post on what seems like the same issue (found here: https://discussions.apple.com/message/21087892#21087892)
Take the following steps:
1) while connected to wifi, toggle off then back on the Show All Music and iTunes Match options shown in my original post. Important: I did this step before, but wasn't connected to wifi, and my music disappeared. Subsequently, I connected to wifi and turned off and then back on those options and everything came back though it was grayed out and my only option was to download music.
2) To get streaming over cellular back, go into Settings>General>Cellular and scroll down to the "Use Cellular Data for:" options and make sure the iTunes option is set to 'On'
The above steps will bring back the streaming capability which seemed to go away when you update to 6.1. It didn't ACTUALLY go away, but something about the update toggled off the iTunes option in step 2 above.
I did a final test by turning off wifi, opening Music app and selecting a song. It played successfully without downloading! Crossing my fingers, but I think I'm good to go!
Hope this helps!

I do not want the learner to be able to click through the project until they hear the audio recorded on each slide, however I also would like them to have click to advance to the next slide. Is there a way to set up these 2 functions together?

I do not want the learner to be able to click through the project until they hear the audio recorded on each slide, however I also would like them to have click to advance to the next slide. Is there a way to set up these 2 functions together?

I don't like that approach for adult learners, cannot refrain from mentioning that.
Don't use a playbar but create custom navigation. You'll need a next button on each slide that appears after the audio (in timeline). Since slides will not all have the same duration you'll need an individual button per slide, a shape button on master slide or timed for the rest of the project will not be possible.

Why am I receiving a notice to update my version and then not able to click on it? It also prevents me from entering the internet if I put my computer to sleep with this update box there!

The box appears after I'm on the internet. It's on my desktop when I go to shut down my computer and after I've shut down the internet. When I click on the x it doesn't disappear. When I click on the box indicating Yes, I'd like to update my version of Firefox it does nothing. If I leave this box there and put my computer to sleep it stays on and actually prevents me from entering the internet! I need to restart my computer or shut down! My computer is a MacBook Pro and is only one year old .

They have to know who the person is who has their account set up wrong? Do you know who they are or how to identify them?
if not, how do you expect Verizon to find which user that is?
Best thing for you to do is set up a mail filter and just throw those into the trash or delete them the second they come into your email box.
here are a couple walk throughs.
How to Filter Mail from a Certain Sender Easily in Win Live Mail, Outlook Expr.

Sometimes when using the Google search engine, after using the Back button in the Firefox 4.0.1 browser, I am no longer able to click in the Google search box.

Sometimes when using the Google search engine, after using the Back button in the Firefox 4.0.1 browser, I am no longer able to click in the Google search box.
This problems has been occurring on two different machines over the last two days.

I think this may not be a browser problem but rather a Google problem.
I am getting the same problem with the Google Chrome browser.

Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

I have been a happy user of Firefox for many years. Around last April first I opened Firefox and was offered an update to v 4.42.0.0 which I accepted. Installation seemingly went well. I forget now exactly what happened but the result has been that ever since April 1 I haven’t been able to open the Firefox browser when clicking on the Firefox icon. My computer now was running very slowly. I tried to uninstall Firefox, but a popup told me I couldn’t because Firefox was in use. This confused me because I couldn’t see it being used. Only now I have found that on Task Manager processes that “firefox.exe” was consuming 99 % of the CPU. After removing firefox.exe by clicking End Process my computer ran better. I uninstalled Firefox I had on my computer and installed Firefox 5.0. Unfortunately I have the same problems: Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

Born2die! Brilliant. I am a desktop clicker and never knew Firefox had a safe mode.
Thank You!
I was unable to start in safe mode initially. The second time I disabled all of the Add-Ons and she started up just fine. I enabled them one by one hoping to track down the culprit but the problem seems to have gone away.
BTW I am running ver. 3.6.8 (in response to cor-el's earlier post) and
Firefox is in the process of downloading 3.6.10 (which I am starting to think may have been what caused this whole problem to begin with)
Incidentally, whats up with all of the Java Console Add Ons?
I have:
Java Console 6.0.11, Java Console 6.0.13, Java Console 6.0.15
Java Console 6.0.17, Java Console 6.0.20, and Java Console 6.0.21
What are they? Do I need them? Can I uninstall them? Is this due to using Open Office?
Also, .NET Framework 0.0.0 Should I uninstall it?

When i start my itunes, it start immediately but than i am not able to click on anything for at-least 20 minutes.

When i start my itunes, it start immediately but than i am not able to click on anything for at-least 20 minutes.
I have a lot of songs on there from my local drive and also a network drive which is connected to my local hhome network.
Now before when i use to load itunes while it get frozen it used to collect information on 3 songs and i knew their names so went ahead and deleted them but now i dont see it collecting any information and just frozen.
I just got an iphone and also noticed that once i am syncing my iphone and than i cancel the sync it will again freeze.
What could be causing this, please tell me a way where i dont have to erase my library and re scan it.
One important note - My iTunes Media folder location is on my Network Drive. Can that be the reason?
Let me know.
Thanks in Advance,
Jay

The "tap to click" function isn't enabled until a user logs on. You should be able to use the "physical click" (push down on the front left of the trackpad) in the login screen.
Regards,
Captfred

Do you know why I cannot access the scheduling and rescheduling features of onetoone? This is over several days. Either I am not able to fill in the ID/password boxes from an Apple email appointment reminder, or if I go through Apple onetoone via Safari,

Do you know why I cannot access the scheduling and rescheduling features of onetoone? This is over several days. Either I am not able to fill in the ID/password boxes from an Apple email appointment reminder, or if I go through Apple onetoone via Safari, I get perpetual spinning after I fill in and click. Help! Thanks.

Call the store in question:
http://www.apple.com/retail/
Extension 5 in the stores in my area has usually led me to getting ahold of a real person. It may differ by store.

I am not able to click on the installation options for CS2. All the boxes are gray. Help.

Similar Messages

Maybe you are looking for