I am not able to compile forms and my form application is close

Hi All,
There is strange problem arising in my system. I am not able compile the forms from my machine.MY machine is having Vista as OS and I have installed the latest 10g release of forms (the vista compaitable version). Also I am not able to open any of the existing and developed forms for one One Oracle Retail product. The existing forms were build on 10g version 2. (10.0.2). But when I am trying to open the forms, the application hangs immediately and then its says explorer is closing, the program has some problems. The same error comes in both the cases.
Thanks & Regards,
Debabrata

Debabrata,
First You must read this topic from Steve Cosner:
Forms 10g installed and running on Windows Vista
After You must to install Forms 10g under Window Vista following the instruction in the topic.
At this time Form Builder work fine; but the Compiler called from Framework return errors and the program hang.
I have tried to run frmcmp.exe outside the Form Builder and the program newly abort.
I have sended my Form to Steve Cosner and I attend a reply.
Bye
Gaetano

Similar Messages

NOT able to compile servlet and EE java files

hi
i am not able to compile java files of servlet
it is showing cannot resolve symbol for servlet classes
since i have installed tomcat j2sdk1.4.2_06 and also facing problem with the classpath since i have to set the classpath everytime as i have already created it in environment variables
show me the way out

**MAJOR SPAMMING SCUM BAG ALERT**
I was puzzled in that you asked a SQL Server question in one post and then in another thread asked a Oracle related question... and then I noticed you had cross posted one of your questions at JavaRanch and I was more annoyed....
and then I found this....
http://saloon.javaranch.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic&f=10&t=002447
You sir -> Michael Byrd -> are a scum sucking dirtbag.
To quickly explain. Mr. Byrd posts his messages (which he copies wholesale from other posters) so that he can get better google caching for the website listed in his profile.
This is such scummy behaviour I don't even know what to say. Other than basically everyone that has ever helped you had totally wasted their time.
You are scum. Your company is scum. I hope you rot in hell.

I am not able to compile a program on my mac...

I am not able to compile a program on my mac; i am getting the following message :"Class names, 'ClassName.Java', are only accepted if annotation processing is explicitly requested". I am new to programming, and I am using a MAC. Any suggestions? I am typing: "Javac ClassName.Java" at the command prompt.

You might want to be posting to the developer forum here:
https://discussions.apple.com/community/developer_forums

Not able to compile servlet

Hello
I would like some one to help me.
I have WindowsXp professional on my Laptop. I downloaded jdk and I am able to compile and run the core java files.
I downloaded j2sdk1.4.2_10 from the website www.java.sun.com. and then set the path in the environment variables. But in the command promt I was not able to compile the servlet.
Could you please guide me about what more has to be done so that The servlet can compile.
Thanking you

**MAJOR SPAMMING SCUM BAG ALERT**
I was puzzled in that you asked a SQL Server question in one post and then in another thread asked a Oracle related question... and then I noticed you had cross posted one of your questions at JavaRanch and I was more annoyed....
and then I found this....
http://saloon.javaranch.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic&f=10&t=002447
You sir -> Michael Byrd -> are a scum sucking dirtbag.
To quickly explain. Mr. Byrd posts his messages (which he copies wholesale from other posters) so that he can get better google caching for the website listed in his profile.
This is such scummy behaviour I don't even know what to say. Other than basically everyone that has ever helped you had totally wasted their time.
You are scum. Your company is scum. I hope you rot in hell.

Not able to compile wrapped package bodies.

Hi All
Can anybody pls help me finding me the reason why I m not able to compile .plb (wrapped package body). There are no compilation errors. But when I run the .plb file (as @xyz.plb), sqlplus window hangs. No error shown. Everytime I had to close the window after waiting for 8-10 minutes.
This is happening only with 11 files out of 200.Rest were compiled.
Any ideas? Do we have any other way to wrap than using pl/sql wrap utility or pl/sql plug-in for wrapping(which is actually the same as former)??
ThanksInAdvance!!
Keep striking the iron until it's hot!

yes, I did check for locks from pl/sql developer only. No Locks.
I waited for 10 minutes for a 6 kb .plb file to get compiled. But had to close the session after that.
I am using oracle 10g, pl/sql developer 7.1.0.1337
sql*plus Release 10.2.0.2.0

Not able to connect to database from Form builer

Hi ,
I installed oracle 10 g in my machine and is accessable from SQLPLUS & TOAD.
In the same drive i installed Form builder, i am getting the below error when i tried to connect DB from form builder.
ORA- 12154 : TNS : could not resolve service name.
Kindly do the needfull.

not able to connect to database from Form builder

I was using my bros account for icloud, he changed & forgot the pass now i want to sign out & put mine but i'm not able to do that and he couldnt recover bcz he did it long time ago and apple support are not sending a recovery email to his email?

i was using my bros account for icloud, he changed & forgot the pass now i want to sign out & put mine but i'm not able to do that and he couldnt recover bcz he did it long time ago and apple support are not sending a recovery email to his email... what shall i do now to sign out?

Tell him to contact the Apple account security team for his country and ask for assistance changing the password: http://support.apple.com/kb/HT5699. If his country isn't listed, he can try contacting iTunes store support by filling out this form: https://www.apple.com/emea/support/itunes/contact.html.

BI Publisher - SuperUser not able to acces Roles and Permission Page

I have set up the BI Publisher as said in http://gerardnico.com/wiki/dat/bip/configuration_bip.
But
1. SuperUser is not able to access Roles and Permission.
2. I'm not able to access the BI Answers Catalog.
I also have a doubt about the BI Server Admin. Is it the RPD Admin?
Kindly Help

I have set up the BI Publisher as said in http://gerardnico.com/wiki/dat/bip/configuration_bip.
But
1. SuperUser is not able to access Roles and Permission.
2. I'm not able to access the BI Answers Catalog.
I also have a doubt about the BI Server Admin. Is it the RPD Admin?
Kindly Help

After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Not able to open pdf and adobe reader on windows xp sp3.

Hello,
I am not able to open pdf and adobe reader on my windows xp sp3 computer. I have reinstalled adobe reader 11.0.3 twice, but, no luck. I would appreciate if you could help me in resolving this issue. Thanks in advance.
Regards,
Venkata

You can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

Finder not able to view folders and files on EHD after updating to OS X 10.9.4

I can see still see 'Hitachi' in the 'Devices' Sidebar, but I am not able to view folders and files on this Hitachi XL2000 2TB FAT32 Hard Drive (EHD) that is USB connected to the iMac below.
Late 2013 Apple iMac (27-inch Display 2560 x 1440), 3.4GHz Quad-core Intel Core i5, Turbo Boost up to 3.8GHz, 8GB 1600MHz DDR3 SDRAM - 2X4GB, 512GB Flash Storage, NVIDIA GeForce GTX 775M 2GB GDDR5, Magic Trackpad, Apple Wireless Keyboard and OS X 10.9.4 Mavericks
All was fine until I updated from OS X 10.9.3 to 10.9.4 earlier this week, so now when I double-click on 'Hitachi' it just loads and loads with nothing happening and never displays the folder and file contents of the EHD.
Also, confirmed that Hitachi EHD has been removed from Spotlight indexing per System Preferences > Privacy > + > Hitachi and it was so this does not seem to be an indexing issue.
I have used OnyX and Apple Disk Utilities unsuccessfully to try and fix this problem.
Interestingly, Backblaze online backup still sees the EHD and connecting this EHD to a Win 8.1 PC also sees the EHD.
Further, I ran the commands below in 'Terminal' to make sure the drive was visible and got the following results which shows that the EHD is not hidden.
iMac:Applications john$ chflags nohidden /Volumes/Hitachi/
iMac:Applications john$ GetFileInfo /Volumes/Hitachi/
directory: "/Volumes/HITACHI"
attributes: avbstclinmedz
modified: 07/10/2014 23:26:44
Finally, I installed XtraFinder and am still not able to see the contents of the EHD, but when I installed OmniDiskSweeper I can navigate the EHD folder tree with no problems and can see the contents of the EHD, but when I try and open up a file it opens Finder which loads and loads and nothing happens.

Apple Support was quite helpful, but in the end I will wait to do a clean install of OS X Yosemite which is due in the Fall and not try and fix OS X 10.9.4 Mavericks.
It turns out that I run backups on my '/Users/john/Library' and the size of this folder before the 10.9.4 update was 1.07 GB and after the update it is 806.9 MB which is baffling, but in the end all of these problems should be resolved with a clean install of OS X Yosemite.
One lesson learned for the future is that I will wait on installing an update until it has been in the wild for awhile as a quick OS X Mavericks Finder Problem search and similar searches show there could be an issue.

Why am I not able to mark "in" and "out" points in Final Cut Pro 6?

I have a bunch of old tapes that I am trying to put on my computer. I have Final Cut Pro 6 and everything hooks up nicely except I am not able to mark in and out points or use capture now. Does anyone out there know why that would be the case?
I appreciate any help I can get.

What VTR? How is it controlled?
What are your capture settings? Firewire Protocol?
x

Not Able to compile Servlet from ?

Hi All,
I am not able to compile Servlet from my package:
1) I Have set the CLASSPATH Variable using below line in System Variables:
C:\CC4\prog\jakarta-tomcat-4.1.30\common\lib\servlet.jar
2) Also Set the CATALINA_HOME with value
C:\CC4\prog\jakarta-tomcat-4.1.30
as per above setting servlet should be compiled but still i m getting error message:
1) C:\CC4\prog\jakarta-tomcat-4.1.30\project\classes\com\example>javac ListenerTest
er.java
ListenerTester.java:17: cannot resolve symbol
symbol : class Dog
location: class com.example.ListenerTester
Dog dog = (Dog) getServletContext().getAttribute("dog");
^
ListenerTester.java:17: cannot resolve symbol
symbol : class Dog
location: class com.example.ListenerTester
Dog dog = (Dog) getServletContext().getAttribute("dog");
^
2 errors
2) Error while compiling other file:
C:\CC4\prog\jakarta-tomcat-4.1.30\project\classes\com\example>javac MyServletCon
textListener.java
MyServletContextListener.java:12: cannot resolve symbol
symbol : class Dog
location: class com.example.MyServletContextListener
Dog d = new Dog(dogBreed);
^
MyServletContextListener.java:12: cannot resolve symbol
symbol : class Dog
location: class com.example.MyServletContextListener
Dog d = new Dog(dogBreed);
^
2 errors
So what could be the posible solution here :
do reply !!!
please
Thanks
prabhat

I have added servlet.jar in the classpath. But the program is not compiling.The error message says that it can not find classes like ServletConfig, ServletException, Cookie etc. Please help.

Not Able to Compile Java code

Hi Java Gurus
I am not able to compile this code Pl help
class For {
public static void main (String [] args) {
int I = 0;
show:
     if (I < 2) {
System.out.print("I is " + I);
I++;
continue show;
}

class For {
public static void main (String [] args) {
      for(int i = 0; i < 2; i++){
              System.out.print("I is " + i);
}this does the same as your program: the for loop is the best for this, but i agree with the others read some tutorials on loops in java. As posted before java has no concept of the GoTo syntax, loops or recursion are your only options

After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

I had this same problem with what's app. There is a new update for the app on the app store which is compatible with ios8. Update the app, or delete it and re-add it. I found a lot of apps weren't compliant with ios8, but after updating everything worked fine.

I am not able to compile forms and my form application is close

Similar Messages

Maybe you are looking for