I am not able to connect my Mac book pro with iPhone 6 using bluetooth
Specification of my Macbook Pro :
Model Name: MacBook Pro
Model Identifier: MacBookPro11,1
Processor Name: Intel Core i5
Processor Speed: 2.4 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 8 GB
Boot ROM Version: MBP111.0138.B11
SMC Version (system): 2.16f68
Serial Number (system): C02M4ZD0FH00
Hardware UUID: 1D25A9C3-C1ED-550F-8743-FF6DEAD9A59D
OS : Yosemite 10.10.1
I am trying to Handoff between my Macbook pro with IPhone 6+, however it is not happening. Even the Bluetooth connectivity is not
happening between the devices.
Try going to System Preferences/Bluetooth and then turn it off, wait a few seconds, then turn it on.
Bluetooth Quick Assist
Similar Messages
-
HT1600 I am not able to connect my mac book pro to the airplay mirroring...I need help please
I have set up everything as supposed to. I have the Apple TV connected to the same wireless as my Mac Book Pro. My computer is only a couple months old so it is compatable. I just bought the Apple TV, and when I go to the display on the menu bar, it does not show the apple tv device detected. I dont know what to do. I need help
is airplay enabled on Apple TV? is the device up to date? Is your computer up to date?
Also see
http://support.apple.com/kb/TS4215?viewlocale=en_US&locale=en_US -
how can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?
https://www.youtube.com/watch?v=72l_FLsXNAg
I use Hercules found here http://www.hercules.com/us/Sound-Cards/bdd/p/123/gamesurround-muse-xl-pocket-lt3 /
also read this helpful thread Outputting 5.1 Channel Surround Sound from your Mac -
HOW I CONNECT MY MAC BOOK PRO WITH APPLE TV
hello
i have a mac book pro and apple tv. but i am not able to connet my mac book with apple tv. so how i conncet my mac book with apple tv.You can use AirPlay to mirror what is on your MacBook. Take a look at this link, http://support.apple.com/kb/HT5209?viewlocale=en_US&locale=en_US
-
How to connect my mac book pro with my TV?
I would like to know how do I connect my mac book pro to my TV, would like to watch film that I bought thru itunes onto my TV.
ThanksYou will need a mini displayport Thunderbolt to HDMI adapter and an HDMI cord.
-
Hi
I am tring to connect my Iphone 4 with my mac book pro wi bluetooth but message comes up with that your mac book is not supporting. So what should I do?You are trying to do this for what purpose?
Unless you are trying to tether your MacBook with your iPhone, nothing else is supported with a bluetooth connection. -
Can you connect a mac book pro with a samsung galaxy note via blue tooth
can you connect a macbook pro with a samsung galaxy note via blue tooth
it seems that they will pair but as soon as the mac has connected it automatically dissconnects
i was informed in the apple store before i bought it that it would be ok
any thoughtsThe USB port on the Time Capsule is used only to connect a hard drive.
Connect your Mac using an Ethernet cable to one of the LAN <-> ports on the Time Capsule if you do not want to use wireless. -
Info in the title. I've received conflicting advice help from the Apple Store so I thought I'd try here. I've restored iphoto from my lastest back-up on time machine from my old computer (iphoto works well on old computer), I've rebuilt the library, I've put the old library on a thumb drive and loaded it manually. It's all there on my old computer, but won't work in my new iphoto.
Try directly copying the Library from the old machine.
To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else. -
HT4061 Why is Iphone 5 not able to connect to Mac or Ipad through bluetooth
Why is my Iphone 5 not able to connect to Mac or Ipad through bluetooth
I have tried all sorts of resetting and tricks to make it work but my IPHONE 5 CANNOT connect to its sisterdevices like Mac or Ipads. it seems to be millions that have the same problem.
Will there be a fix for this or don't they care at all?No iPhone has ever supported file transfer by Bluetooth & most likely never will. So, don't expect a "fix".
-
Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files. -
I am planning to buy apple air mac book. i am not that technical will i be able to handle apple mac book. i am aware of using windows os but can i get software like that of notepad, word pad in os X lion. can i get partitioning in macbook,
Yes. Switching to Mac might be overwhelming at first, but it is not difficult. I Just started using Macs regularly about 9 months ago after using only Windows based pc's for over 15 years. Macs come with TextEdit , but you can also purchase MS Office for Mac or use Apple's version, called iWork.Yes, you can partition the hard drive of a Mac. Read these also: http://www.apple.com/support/switch101/, http://www.apple.com/support/mac101/. With regular use of a Mac, you will be able to use it without even thinking about it, just like how you learned to use a WIndows pc.
-
I want to connect my Mac Book Pro to the internet in France without any wifi connection available? Mi Fi? Sim card? All we have is a phone signal in this rural French location. I want to be able to Skype to states from there. We have a friend with a 3G ipad who uses an Orange sim card to do it. I would rather not have to buy an Ipad.
thanksI found out that the data package for one month useage with MiFi is 1G. How many minutes of online time does that correspond to?
-
i bought a mini DVI to HDMI convertor and a HDMI to VGA cable to connect my mac book pro to a tv but it doesn't work any one can help.
I would suggest looking into a Thunderbolt to HDMI connector. In this case, you may be able to use the TV as an external monitor. For this option, please confirm through additional research. I have not tested it personally.
You can also use an Apple TV, which connects with HDMI. In this case, you can use Airplay Mirroring. Not all Macs support Airplay Mirroring, so you need to check first. I have a Mid-2011 27" iMac, and it supports Airplay Mirroring. I don't use it often because my TV is in another room, but I just tried it and it worked. It had to change the screen resolution to work well, so I don't know if I would want to use it as my day to day monitor. http://support.apple.com/kb/ht5404 -
How to connect my mac book pro to network printer Canon IR 2010f?
I'm desperate to know how to connect my Mac book Pro to network printer Canon IR 2010f. This printer has an independent system, therefore, no need a PC to be on, in order to print. But this printer is a network printer. Help me please.
The Canon UFR2 v2.20 driver for Mac OS X does not list the iR2010F as a supported model. The same is so for the Canon PS driver so I therefore believe this model is PCL5e only.
What you should do is open Safari and type the IP address of the iR2010F. This will connect to the internal web page of the copier and from the provided pages you should be able to see what printer languages are supported.
If it only lists PCL then you will be able to print to this copier using the Generic PCL driver included with 10.6.
So if you open Print & Fax, click + to add and then select IP > LPD for the protocol you can then enter the IP address of the iR2010F and leave the queue name blank. For the name you can change that to iR1020F and for the Print Using, select Generic PCL Laser Printer.
One note with regards to this driver. It is defaulted to 300dpi so you will need to open the print dialog when you do print and change the resolution to 600dpi to get better print quality. -
Hi,
I'm planning to buy a thunderbolt display.Since I have not only apple computers with a thunderbolt port I wonder if it's possible to connect my mac book pro via thunderbolt and a DVI switchbox via a "mini displayport to DVI connector" to the thunderbolt display at the same time. Thunderbolt is a bus architecture. Thus there must be an ingoing and an outgoing port on the display. The rearview of the display I've seen so far don't show this:
If this is not possible then I must question the market chances of this product. Seems as if the product marketing guys exaggerated the launch of the thunderbolt technology.
-ais-swissais-swiss wrote:
How to connect windows laptop (vga) to thunderbolt display?
AHHH??!!!!!! Was that your original question?? I assumed you were trying to output FROM your computer (MacBook Pro w/ Thunderbolt) to the new display and then OUT to be the video source to a DVI switcher.
MB Pro w/TB ---> TB Display ---> mDP-to-DVI adapter ---> DVI switcher
So it seems as if it's not possible to use the thunderbolt display with the mini display port adapter to DVI you've mentioned.
I did not understand that you were trying to use other PC's into a switcher and then THAT Video source to connect INTO the TB display. If THAT is what you're trying to do, then NO.... You can NOT use the new TB Display to be used to display "FROM" a DVI switcher (and also can NOT be used to display from other Non-TB-Apple computers).
I've also called apple. The statement was that one needs a computer with osx 10.6.x in order to connect the thunderbolt display. That makes it impossible to hook a windows pc or older mac to the new and shiny thunderbolt display.
I wonder why apple doesn't state this in their technical descriptions...?
-ais-swiss
Actually, the state that information all over the Tech Specs on the Apple Store website.
http://store.apple.com/us/product/MC914LL/A?mco=MTY3ODQ5OTY
Here are two different statements from that webpage:
So yes.... other NON-Apple PC's (or non-TB devices) do Not have the Thunderbolt technology (hardware/software) to be able to communicate with the TB display or other TB devices.
Maybe you are looking for
-
SONY HC1 CANNOT CAPTURE WITH FCP 6.0
HELP PLEASE!! This problem is driving me mental. I have a Sony HDR HC1. I've been shooting in DV PAL 4:3 before and had no problems at all. It's well past time when i should be shooting in HDV 16:9. I have changed the settings on the video camera to
-
How do i update my software on ipod touch 2nd generation
I am having trouble updating software any suggestions?
-
Hi I need to copy all photos from my ipad2 to macpro 2012. We have multiple apple id users in ipad2, so the photo sharing though on, not all photos are picked up in macbook pro. Please can you help
-
Chr(10) not working in isql *plus
Hi, Im using oracle 9i. i executed the following statement in sql * plus, select 'sankar'||chr(10)||'naraya" from dual the output is , sankar naraya but when i execute the same statement in iSQL *Plus the output is sankar naraya i need the first outp
-
RESCIS - Unable to select custom report from Selection Screen
Hi all, we have developed a custom report for transaction "RESCIS-Evaluation of service charge settlement" but we have found that althought the report appears in selection screen field called "REPORT" it throws message RESCIS003 but the report is not