I am not able to connect with Itunes Match. I constantly receive the message error 4010

I am not able to connect with Itunes Match. I constantly receive the error 4010.

I can run the general "Update iTunes Match" from the menu but cannot add individual tracks by right-clicking (control-clicking) on them the way I usually do. Then I get the 4010 error message.
Based on other posts here, I can assume the problem is not just me.

Similar Messages

  • Not able to connect with iTunes

    its has been 6 days already and i am not able to connect with itunes to purchase something.
    i have used visa and mastercard and i also have money credited to my account.
    please help!

    Hello FoxyNix
    Check out the steps below to troubleshoot you issue with connecting to the iTunes Store on your iPhone
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Troubleshoot issues on an iPhone, iPad, or iPod touch
    If you haven't been able to connect to the iTunes Store:
    Make sure your date, time, and time zone are correct in Settings > General > Date & Time. 
Note: Time Zone may list another city in your time zone.
    Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
    Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
    Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
    Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Try resetting (turning off and then on again) your Wi-Fi router.
    If the issue persists, try troubleshooting your Wi-Fi networks and connections.
    Regards,
    -Norm G.

  • My iphone is not charging or showing in my computer. but its getting charged via wall apple charger.. Not able to connect with itunes.. please help.... :(

    My iphone is not charging or showing in my computer. but its getting charged via wall apple charger.. Not able to connect with itunes.. please help....

    No it doesn't. Sometimes it make a sound that it should when connecting but that is it. Never actually charges or syncs. And it is a brand new cord.

  • TS3992 I am not able to connect with iCloud since I updated to the new iOS 6.0

    I am not able to connect to iCloud after updating to the new iOS 6.0. I have frequent message about my settings in iCloud and Facebook and iTunes, anything I can do to resolve this problem? I have an iPhone 4S

    What happens when you try?

  • After iPad exchange, i am not able to connect with iTunes. IT look to be recuparating, After iPad exchange, i am not able to connect with iTunes. IT look to be recuparating

    After the exchange of iPad because the 3G was not working, i canot connect to iTunes.
    IT seem to be in a recuparating mode that i canot control.

    Sounds like the one common thing is the adapter. The cheaper, non apple branded ones tend to fail.
    Try another adaptor before worrying about your ipad.

  • HT1212 I forgot my pass word to my apple ipod 2nd generation. It says that i must connect to itunes to cpmlete this process, but as i log into itunesit tells me i am not able to connect to Itunes because i have forgot the password. I am not sure what to d

    I dont understand what to as i am not able to change my password on itunes it has locked me up

    Read the article you linked

  • I have not able to connect with itune store via proxy server - I have upgraded the itunes 11.04 version - Any one knows how to solve this problem

    Appreciate if any one help me out to solve this problem ?

    Open the Keychain Access in the /Applications/Utilities/ folder and create a new keychain, giving it the name login.
    (25187)

  • Issue connecting with iTunes Match

    Hi, i've got an issue connecting with iTunes Match. Most of the time iTunes doesn't connect to iTunes Match when launching the app. I just see the cloud symbol that indicates it tries to connect. And it just keeps on going. I then have to quit iTunes and relaunch it. Type in my Apple ID password. And still nothing. But around a third or fourth time I usually get a connecting going and then listen to music
    And I'm not impatient. I give it some minutes everytime while opening and browsing the iTunes Store.
    And the same thing happens after Sleep Mode. It is kind of annoying. Having open and close iTunes all the time.
    Is there anything I can do? Am I perhaps doing something wrong? Is anyone experiencing the same problem or issue?
    Thanks.  

    Hi,
    Yes, your music remains on you computer.
    Jim

  • I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app?  Anyone facing the same issue..

    I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app?  Anyone facing the same issue..

    I have a 4S and upgraded to iOS 6 last week without any issues.
    Have you tried resetting your phone (hold the power and home buttons down together until the silver apple appears)?

  • I use 1 Icloud account with 2 devise but the other devise arrest out mine, than my devise was not able to connect to itune anymore. My devise still can swich on but it always restart after afew seconds. So can it fix ?

    I use 1 Icloud account with 2 devise but the other devise arrest out my devise throue find my iphone, than my devise was not able to connect to itune anymore. My devise still can swich on but it always restart after afew seconds. So can it fix ?

    Looking at the error message "The Network Adapter could not establish the connection" , It appears hostname and port may be incorrect. Review the targets.xml under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\emd and
    emoms.properties under E:\oracle\product\10.2.0\db_1\SAP_solman_SDB\config folder to make sure host ( sap_solman) and port (1527) are correct.
    As far as setting the environment variables goes, you can go to control panel -> system -> advanced -> environment variables and set the ORACLE_HOME and ORACLE_SID
    -Ramesh

  • I'm having trouble connecting to apps, itunes store, internet on my iPhone 5 running iOS 7.0.4.  I am currently connected to a perfectly running WiFI connection.  Why am I not able to connect anything?  I've tried ALL the fixes suggested.  HELP!!!!!!!!!

    I'm having trouble connecting to apps, itunes store, internet on my iPhone 5 running iOS 7.0.4.  I am currently connected to a perfectly running WiFI connection.  This just started happening today (2/19/14)!  Why am I not able to connect anything?  I've tried ALL the fixes suggested.  HELP!!!!!!!!!  BTW, I know my Wi-Fi connection is good because I'm using it on my desktop and other people in my office are also connected on their iPhones and desktops.  Again, HELP!!!!

    You may not really be connected to your WiFi network.
    Your router may not have given your iPhone a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPhone (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • My iphone is not able to connect to itunes and shows the msg "cannot connect to itunes store", my iphone is not able to connect to itunes and shows the msg "cannot connect to itunes store"

    my iphone is not able to connect to itunes and shows the msg "cannot connect to itunes store"

    Hello there, Nau1988.
    The following Knowledge Base article should help with troubleshooting your issue:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    In your case, focus on the section titled "Troubleshooting on an iPhone, iPad or iPod Touch", there are detailed steps here for working to a resolution of your issue.
    Additionally you might want to review the recommendations in this article as well:
    iTunes for Windows: iTunes Store connection troubleshooting
    http://support.apple.com/kb/HT1527
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!

    hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!please help!

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • Datareader is not able to connect with database-Urgent

    Hi All,
    All of a sudden the Datareader component in my ML experiment is not able to connect with database with the following error:
    [ModuleOutput] DllModuleHost Error: 1 : Program::Main encountered fatal exception: Microsoft.Analytics.Exceptions.ErrorMapping+ModuleException: Error 0000: Internal error ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentException: The value's length for key 'password' exceeds it's limit of '128'.
    Module finished after a runtime of 00:00:00.2031339 with exit code -2
    Module failed due to negative exit code of -2
    It complains about the password being long-but the same credentials I have been using for the last 2 months and still able to use it to run sql queries on that same database using the management portal.
    It appears that Azure encrypts the password and that encrypted password is too long...just my guess after looking that the output.Inside Ml it just says as internal error
    Would appreciate if someone can point to the issue at the earliest...(There is a demo early next week)
    Subscription:Enterprise,
    LOCATION: East Asia
    Regards,
    Biswajit

    Hi,
    Please check this url:
    https://studio.azureml.net/Home/ViewWorkspace/bc85d4f81d2246c4b1430eb395229a3a?&hashSeg=#Workspaces/Experiments/Experiment/bc85d4f81d2246c4b1430eb395229a3a.f-id.11776ae4400f4c1aa9f58308c30810fa/ViewExperiment
    which is an experiment which I created doing save as of the experiment in which the data reader works.
    I stripped everything except the data reader and setup the rest of the components...I finally have to write the results back ,so also pulled a Writer component.
    Now,the data reader works fine..but the Writer fails:
    Error 0071: Incorrect username "acnadmin" or password is passed
    Strangely,its the same credentials set in the DataReader.
    Looks like all the DataInput/Output components created recently only have the problem.
    Once again,while the datareader in this case passes the password in plain text,the writer encrypts,hence fails.

  • I am not able to connect with another ipod via bluetooth can u pls help me

    i am not able to connect with another ipod via bluetooth can u pls help me

    Are yo trying to pair via an app that supports BT pairing?  If you are I would try:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    -Resetting network settings on the iPod: Settings>General>Reset>Reset Network Settings

Maybe you are looking for

  • Silent install of Data Server 9.0.1 Patch Set 2

    The install instruction for the patchset indicate there is supposed to be a response directory after expanding the zip and tar files but there is not. I can not find this documented anywhere. 1. Is it supposed to exist? 2. Windows version patch 901 p

  • How to create Internal Order with LKD status

    Hi All Experts , Can anybody tell me how can we create IO directly in LKD status ? Or it is manual acitivity by clicking on Set / Rest button and then check LKD and save. I tried in KOT2_OPA but not no any option found. If any experts can guide for t

  • Duplicate Handling Unit Number

    Hi All, I am stuck with this error where I can see same handling unit no. in two different deliveries. I am not able to figure out why is the handling unit repeating. I checked it in the VEPO table where I see same handling unit no but in different y

  • Process having dynamic subqery in for loop cursor

    I created a process that puts all retrieved rows into a collection. Users can select on quite a few columns, say unit, last_name, shift, etc. When the query is built based on users' inputs, I can't get it working using a For Loop Cursor (code 3.). Bu

  • Identify a specific Safari window

    I am trying to write a script to screencapture or print a specific Safari window. I have 6 monitors, 1 monitor is always devoted to one Safari window that displays the same website. Other Safari windows are open as well, in addition to other applicat