I am not able to deauthorize my windows box

I have Itunes 7.02 on two windows XP machines and I want to deauthorize one of them. However, every time that I do so I am told that I am using the wrong user ID or password. I have tried this on both machines and I get the same result. I even went as far as resetting my itunes' account password and I still get the same result. Anyone knows anything else I could try. By the way I have already used my once a year deauthorization option. So I cannot use it again for another year.

Hey atreyes,
Are you using an Apple ID or the other option of AOL at the deauthorize screen?
When you enter ID are you using the full ID? (for example [email protected] and not just steve)
Hope this helps,
Generik

Similar Messages

I am not able to run a Windows Azure application

I have a very strange issue.
I am not able to run a windows azure application which has a WCF service and mschart in it. Following are the steps to reproduce the error:
1) Create a new windowsazureapplication with a blank asp.net webrole
2) Now add a new WCfService
3) run to check it runs ok
http://i.stack.imgur.com/1g6gW.png
4) now in one of the pages include mschart, and open the design of the page to make sure the webconfig is changed to use the mschart.
5) now try to run the project.
I am getting error message like this one:
enter image description here
Is this a problem with windows azure or am I doing somthing wrong?
FYI: This is not my first project on windows azure.
RuchitRami

As far as I know Toshiba doesnt support such Microsoft stuff so I think Microsoft is the right adres for such issues.
Have you already checked what Microsoft say about that?

Not able to scan on windows 8 x64 with acrobat 10.1.4

I am not able to scan on windows 8 pro x64 rtm (from MSDN) with acrobat 10.1.4.
My combined printer/scanner model is HP Laserjet Pro 400 color MFP M475dw.
My scanner driver "WIA-HP LJ300-400 M375-M475 scan" works fine in Windows Paint, but when trying to scan with Acrobat it only shows a "Wrong parameter" message. When I try again or to close Acrobat a "operation not allowed because scanning is in progress" error message comes.
Is acrobat 10.1.4 ment to be windows 8 x64 compatible (like the sales rep told me)?
Is there a solution to this problem?

As Acrobat X up through 10.1.4 wasn't intended for a Windows 8 "beta" a possible solution is to use what ever comes along that has been designed for Windows 8.
Keep in mind Acrobat 9.2 worked with Windows 7 until the first round of Win 7 updates. Full functionality came with Acrobat X (the 10.1 update provided PDFMaker compatiblility with some Office 2010 x64 applications).
Be well...

After system restore ,we are not able to activate the windows,while login to systems getting an error 0x800700B7

after system restore ,we are not able to activate the windows, while login to systems getting an error 0x800700B7
Cont-8096688758

hi Jain,
you may need to check the transfer structures,
right click infosource and 'change', click 'comm.structure'/expand,
click 'transfer', move the 0BASE_UOM from left to right side,
or if you wont use the comm structure anymore, you can right click infosource and 'delete comm structure'
hope this helps.

Not able to view the window when I run cim.bat file

I have installed ATG web Commerce 10.0.3 and I need to configure MySql. For that I need to Start CIM by running the following file: <ATGdir>\home\bin\cim.bat and later I have to Type P to choose the products to configure, at a minimum ATG Platform and ATG Content Administration. But when I am not able to view the window to proceed further when I run thecim.bat file.Please let me know if anyone has any idea about this.

Hi,
Please find the error log while running in the command prompt.
C:\Documents and Settings\******>c:\ATG\ATG10.0.3\home\bin\cim.bat
Exception in thread "main" java.lang.UnsupportedClassVersionError: Bad version n
umber in .class file
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
4)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at atg.core.util.BeanUtils.instantiate(BeanUtils.java:427)
at atg.core.util.BeanUtils.getBeanInfo(BeanUtils.java:395)
at atg.nucleus.SimpleComponentState.getComponentClassDescriptor(SimpleCo
mponentState.java:547)
at atg.nucleus.SimpleComponentState.<init>(SimpleComponentState.java:91)
at atg.nucleus.SimpleConfigurationState.<init>(SimpleConfigurationState.
java:93)
at atg.nucleus.PropertyConfiguration.configureService(PropertyConfigurat
ion.java:756)
at atg.nucleus.Nucleus.<init>(Nucleus.java:832)
at atg.nucleus.Nucleus.<init>(Nucleus.java:717)
at atg.nucleus.Nucleus.startNucleusCheckLicense(Nucleus.java:4144)
at atg.nucleus.Nucleus.startNucleus(Nucleus.java:4021)
at atg.cim.SessionContext.startNucleus(SessionContext.java:632)
at atg.cim.SessionContext.startNucleus(SessionContext.java:610)
at atg.cim.flow.CimFlowCreator.startDefaultCimFlow(CimFlowCreator.java:7
4)
at atg.cim.Launcher.startCimFlow(Launcher.java:168)
at atg.cim.Launcher.main(Launcher.java:68)

Oracle 10g Not able to loging in Window 7

Hi All
I have Installed the Oracle 10 g in my Laptop , the Operating System is Windows 7 Profisional (ut 64bit) oracle was installed successfully , after that i am not able to loging the oracle
once i entered the Credential not able to login , screen i disappears , but same software installed in Window XP successuly login
could you please provide me any septd need to do in window 7
Thanks in Advance
Regards

Since Windows 7 was released after the 10g releases, the Installation Guide does not include Windows 7. In this case, the Certification should be checked before proceeding.
http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html
From here, you will find that 10.1.2 is certified on Windows 7 only in some cases. For example, using iDS, it is certified on Windows 7 32 bit.
You only said Oracle 10g, so perhaps you are on an Oracle Database version. If so, this is not a Forum for the Oracle Database product.
...Ken

Not able to install sysprepped Windows 8.1 image, an OfflineServicing error appears.

Hello
I have Windows 8.1 Enterprise image failing at the end of the PE phase from a
WDS Server. I´ve searching through every related post but nothing solves the issue. My scenario is similar to this one (http://social.technet.microsoft.com/Forums/en-US/7ce4c49d-e8a4-460a-ae17-240daaf5f50e/deploying-a-win7-image-via-wds-fails-with-offlineservicing-error?forum=w7itproinstall),
but with Windows 8.1 Enterprise instead.
Basically, I have sysprepped Windows 8.1 and capture the image successfully without any problem. Then, I´ve uploaded the image to my WDS without any unattend xml file, but when trying to install it I get the following error message after completing the "Expanding
Windows Files" phase:
“Windows could not apply unattend settings during pass [offlineServicing]”
I´ve used the official image release, plus the only one partition disk is formatted before the installation. Every configuration seems to be set correctly. I wonder if there is any particular issue related to Windows 8.1.
I´ve already done this procedure with many other OS images and I´ve never got this error message.
Furthermore, I also tried to perform the installation with an empty unattend answer file attached to the deployed image, but the error still appears.
I wonder if the Win8.1 image needs a proper configuration of the unattend answer file, specially on the
Pass 2 of OfflineServicing. Unfortunately I don´t know how to configure it. I would like to keep the credentials and partition configuration be set manually.
Thank you for any help you can give me.

Hello, thanks for the replay but I didn't found any relevant log file on the client machine.
Unattend mode is unchecked, and I haven't used DISM at all when creating the image. I haven't also opened nor updated any metroApp (although if this were the case, it would raise an issue on sysprep phase).
X:\Windows\panther directory does not exists; (C: volume is not available at installation phase)
X:\Windows\diagerr.xml doesn't have any relevant information (it defines some AtrributeType tags with a number in a xml format but it has no content on any tag.)
X:\windows\tracing\ folder is empty;
X:\windows\Logs & \Logs\CBS folders are empty;
I've checked all the volume and I couldn't find any relevant log which shows an error on the instalation.
In addition, I tried to look into WDS server, but the Enable Log property that the article refers for Windows Server 2012 (WDS is installed in a Windows Server 2012), is not shown at the
EventViewer - Deployment-Services-Diagnostics section. Plus, I search the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Tracing\WDSMGMT
entry in order to enable it, but it does not exist.
WDS worked and is working without any issue regardless this Windows 8.1 image. I don't think it has a somthing to do with its configuration.
Looking forward to hearing from you.

Itunes suddenly not able to open on windows 7

Hey,
Suddenly, iTunes will not open on windows 7. If I try to open it, it appears in the taskbar, but will disapear from the taskbar a second later.
I have been using iTunes on this computer for 3 months, and this is the first trouble I have had with it. A day before this happened, it would not recognise
that I plugged my iPod Touch (Even though windows regonized it as a camer, like always.) It kept trying to wifi sync, which wouldn't work because our wifi wasn't working at the time.
Thanks for any help.

Doublechecking. Have you worked through the following troubleshooting document?
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues

Anyconnect is not able to run with windows routing & remote access service

I am unable to connect with the new Anyconnect VPN installation when it tries to connect, it raises an alert that says, "The Windows Routing and Remote Access service is not compatible with the VPN client. The VPN client cannot operate when this service is running."
I have a Dell system laptop, OS is XP SP2 with all the latest Windows updates up to SP2. My internet connection is DSL modem. Internet hardware is an
external adapter connected to my USB port. The adapter is controlled by the Routing and Remote Access service mentioned in the alert message.
Can anyone help me how we can solve this issue. I appreciate the help and currently some of the users can not connect to my network who works from home.
Thanks
Chandru

I believe that Chandru's concern is in his statement that his DSL modem is controlled by the RAS service.
I agree with Andrew that Chandru probably does not need the RAS enabled. I have used several Dell laptop running XP and connected to DSL just fine without needing RAS. If there is some aspect of how the laptop is configured that results in needing RAS for the modem then perhaps Chandru can clarify this for us.
HTH
Rick

Not able to install the windows backup utility or any windows features

Hi Guys,
Good Day.
while i'm trying to install any windows features in server (Windows 2008 Enterprise + service pack 2) I'm getting below error always. Thanks for the advanced help.
Windows PowerShell
Windows Server Backup Features
Windows Server Backup
Command-line Tools
Windows PowerShell: Installation failed
<Error>: Attempt to install Windows PowerShell failed with error code 0x8007045D. The request could not be performed because of an I/O device error
Windows Server Backup Features: Installation failed
<Error>: Attempt to install Windows Server Backup failed with error code 0x8007045D. The request could not be performed because of an I/O device error
<Error>: Attempt to install Command-line Tools failed with error code 0x8007045D. The request could not be performed because of an I/O device error
The following features were not installed:
Windows Server Backup
Command-line Tools

Hello,
This forum is for discussions and questions regarding profiles and Microsoft's recognition system on the MSDN and TechNet sites. It is not for products/technologies.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Acrobat x not able to launch in window 7

Hi all,
I have installed Acrobat X Pro and was running quite smoothly for about half a year.
The problem one day is that after launching Acrobat X Pro, I tried to click the open file and it crashed on me. So I tried to launch Acrobat X Pro again but to no avail. I then restarted the computer and tried to launch Acrobat X Pro but after seeing the harddisk spin for a while, I still don't see Acrobat X Pro being launched.
Strangely, Acrobat X Reader manages to launch successfully. What gives?
Thanks for reading!

Hi Bill,
My Acrobat X comes with CS5.5. So I might not be able to follow Michael's method of using the Acrobat Cleaner tool which would be more effective if you are installing Acrobat Pro as a standalone product.
Moreover,the license repair tool which he had mentioned might be more useful for both Acrobat 8 and 9 not for Acrobat X.
Any other methods of resolving the dilemma I am facing apart from uninstalling my Acrobat X? I am concern that even after I uninstall and install back again, I might not have Acrobat X working.
Thanks for reading!
Cheers!

WRT600N not able to connect using windows 7 desktop.

all other computers on network still working fine. Did power cycle and tried to run disk in compatibility mode. Not establishing Ip and cant get into the manual setup with 192.168.1.1 either.

I have a similar problem...
The Linksys WRT600N is working fine withe all the computers in the house, but the new computer I bought has Windows 7 on it and I cannot acces the internet.
It is very strange that I can send and receive emails (on wireless) from this new computer but cannot acces the browser.
I tried downloading Mozilla (I thought the Internet Explorer was not working) but Mozilla does not work either.
Any chance to help me?
Thanks!

Not able to boot to Windows XP all the time

My BIOS version is AMIBIOS Version 3.31a. After installing a new hard drive with a K8T Neo-FSR motherboard am I receiving the following error.
PXE-M0F: No boot filename received
It keeps on doing the same error over and over again.
The BIOS does see the hard drive.
The boot order in the Realtek RTL8110S/8169S Gigabit Boot Agent configuration menu
is Always boot network first, then local devices.
When I change the boot order to ROM Disable I receive the following error.
Boot Failure
Reboot and select proper boot device
or insert boot media in selected boot device
Press any key when ready
After changing the boot order to boot the devices ordered in BIOS setup it starts perfectly into Windows XP. Once I shut down and restart the computer the following message comes up.
Boot Failure
Reboot and select proper boot device
or insert boot media in selected boot device
Press any key when ready
How can I get it to stop?

Do you ever boot from LAN? If not disable boot from LAN. When you change boot order do you simply set it to boot from drive with OS on it and restart or do you 'save changes and exit? Is your new HDD S-ATA 1.5 or 3.0? If 3.0 did you jumper to 1.5?

Not able to install software (Windows 7)

I bouht a used Livedrive and have some problems with windows 7/32
Normal synchronisation is possible with 4.414e, but under new user. I can not synchronize from Palm Desktop or Outlook the data from my CLIE TJ35 to the lifedrive.
Anather hard probleme: Palm One Quick install ist not working with windows 7 (shows nothing after start) and install of lifedrife manager ends with error "failes to start palmOne remoteLibrary initialisation.
Thank you very much for any help
Horst

horst37, neither Quick Install, nor the LifeDrive Manager will work with Windows 7.
Microsoft broke these two programs when they changed to Vista. Since Win7 is similar to Vista, it still doesn't allow the two to work correctly.
This is why Palm Desktop 6.2.2 was made by Access - it has a new "Install Program" to move files to a PalmOS device.
I'd suggest you try 6.2.2, and add another program from Pimlicosoftware.com - PalmHotsyncSetup.exe.
Have you tried beaming the data from the Clie to the LifeDrive?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Not able to login with window AD account

Hi,
I did all the necessary configuration for windows AD in cmc,
Here are the steps,
I did the following configuration to set up the WINDOWS AD,
1.Configured the service account for use with the AD plug in.
a)Created the service principal name (SPN) for service account
b)Set delegation for the service account.
2.configured the BI Plateform for use with the service account
a)Add SPN to the CMC.
b)Set the SIA to run as the service account
c) verified that service account and windows AD login account is
working checked that no error message appeared and could see white screen
I tried login with my AD account credential in to CMC but shows error showing "not authorized to login"
can any1 please help
Thanks,
pavana

Ambarish,
is this the Kerberos configuration file, I need to set up
[libdefaults]
default_realm = DOMAIN.COM
dns_lookup_kdc = true
dns_lookup_realm = true
default_tkt_enctypes = rc4-hmac
default_tgs_enctypes = rc4-hmac
[domain_realm]
.domain.com = DOMAIN.COM
domain.com = DOMAIN.COM
.domain2.com = DOMAIN2.COM
domain2.com = DOMAIN2.COM
[realms]
DOMAIN.COM = {
default_domain = DOMAIN.COM
kdc = HOSTNAME.DOMAIN.COM
DOMAIN2.COM = {
default_domain = DOMAIN2.COM
kdc = HOSTNAME.DOMAIN2.COM
[capaths]
DOMAIN2.COM = {
DOMAIN.COM =

I am not able to deauthorize my windows box

Similar Messages

Maybe you are looking for