I am not able to delete voice mails after the new software upgrade
Today I downloaded the update for my iPhone. I am not able to delete voice mails. When I try to delete them the screen freezes and I need to get out of the screen in orders for it to unfreeze. I tried hard resetting and that didn't help?
It is in privacy settings/ general/restrictions then down to privacy
Similar Messages
-
Hello There,
please help, I have been trying to get my ipad to work again for hours without luck.
After running the new software update on my ipad 2, I started having issues; device turned off by itself, apps couldn't be downloaded, etc (however it was at least working).
Being frustrated with the newly born issues, I decided to restore the ipad, hoping that would solve the issue, however I ended up with the black screen telling me to connect to iTunes and when I connect and go for restore, I get error message 4013 and 21. I tried re-installing iTunes, upgrading my opp system, but nothing,
Please help!!! Very annoying!!!
ThxYou say "USB can't be the issue...". I disagree. There are thresholds, etc. Maybe the iPhone passes some threshold, but the iPad does not.
You might reboot all devices. If that does not cure it, then check the TS3694 article I attached above. -
I changed my Apple ID that using an invalid email address and I am trying to update iCloud account with my new Apple ID on iPhone 5 with iOS 7.1.2. I am not able to delete iCloud account without the old password. Is there a way to update the Apple ID of my iCloud account?
Many people are having probalems with this right now. The only solution I've seen that seems to consistently work is the one posted by Brackers28 here: https://discussions.apple.com/message/23020591#23020591. This only works if you still have access to your old email account. If you don't, you'll have to have Apple help you reset the password for your old account so you can turn off Find My iPhone and sign into your account with your correct ID.
-
Am I correct in assuming that the NIKON D810 can still not be tethered in Lightroom even after the 5.6 upgrade ?
...And google says:
Tethered camera support in Lightroom -
My FaceTime with the new software upgrade is not working
My FaceTime with the new software upgrade is not working.how do I fix this
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Not able to delete a delivery after revenue recognition is reversed
Hello Gurus,
We have a situation for certain Sales Order types after creation of Sales Order -> Delivery and PGI, we do revenue recognition. But there was some mistake and delivery needed to be deleted and recreated if needed. So after doing revenue recognition reversal we are reversing the PGI. After this when we try to delete the Delivery ( which would have got deleted if there was no revenue recognition process ) we get the below error.
Is it a problem with the way Revenue recognition is configured or does the standard behave like this. If the Invoice is also present in the above I am able to cancel the Invoice. If you think its a problem with the way Revenue reccognition is configured please advise.
Item 000010 cannot be deleted (revenue recognition status)
Message no. VL896
Diagnosis
The delivery or delivery item cannot be deleted.
System response
The document cannot be deleted since the delivery contains items that
reference sales document items that are relevant for revenue
recognition. When the goods issue was posted, the system created revenue
lines that had already been recognized. This means that there are
subsequent documents in revenue recognition for this delivery.
Procedure
If you no longer require the delivery or delivery item for deletion, set
the delivery quantities to zero and repost the goods issue. Make sure
that the quantity zero is allowed in Customizing for the delivery item
category. When the goods issue is posted, the overall processing status
is set to C and the delivery can be archived. Message determination
should be configured not to send any messages in this case. To make sure
that the system makes revenue corrections if there are differences
vbetween billed and recognized values, set a billing-relevant rejection
reason in the sales document item if more than one partial delivery is
allowed.
If you still want to use the delivery, adjust the delivery quantities
accordingly. Alternatively, deliver the referencing sales document item
again. Note that the sales document item cannot be delivered again if
only a partial delivery is allowed.
What are the changes I can do to Delete the Delivery?
If I cannot Delete the Delivery, Should I make the Delivery as 0 qty and create a new delivery with changed qty and do further process. Or should I reject the Sales Order and create a new sales order with exact qty and do further process.
Please advise.
Regards,
SNK.
Delivery has one line item. For the above case scenario, invoice is there for some deliveries and for some deliveries there is no invoice. Eg: SO -> DN -> PGI -> Rev Recog -> Iv or SO -> DN -> PGI -> Rev Recog. Requirement was SO was wrongly created as the qty was wrong or in some cases SO needs to be rejected. I am able to cancel Invoice. Rev recog is reversed. PGI is cancelled by VL09. Not able to delete Delivery and I get the above error. Ideally I thought since Rev recog is reversed, Delivery should have been deleted but not happening and above error comes.
SO - Sales Order DN - Delivery IV - Invoice
Edited by: sapconsultnt on Dec 16, 2009 5:06 AMHello,
Please review the Note 1224871 which introduced this functionality.
Regards,
Raghavendra YN -
Not able to open BEx Broadcaster after BW 7.4 Upgrade
Hi BW Gurus,
I am getting the error as shown below while trying to open the BEx Broadcaster. Please refer below for the step by step procedure.
This is seen after the BW 7.4 Upgrade. It was working perfectly till 7.3. Please guide me is there is any setting has to be changed.
Thanks a lot for your valuable reply.
I am not able to open the BEx Broadcaster through the Query Designer after the 7.4 Upgrade. The steps of my activity include :
1. Open BEx Query Designer
2. Open an existing query which needs to be broadcasted.
3. Publish -> BEx Broadcaster.Sure...
I think if you go thru transaction SNOTE, you can download and see a PDF of a KBA.
But I always access via market place (which is exactly the same steps of SAP notes):
https://service.sap.com/sap/support/notes/<note number>
or
https://service.sap.com/notes and seach with the KBA number.
Cheers!
Edward -
Does anyone know how to enable editing on a new computer? I only have an 8gb phone and over 4gbs of music, half of which I don't even listen to anymore. I really want it off my phone, but when I plugged it into my new macbook nothing would delete. My old computer barely turns on so I can't even plug it into the old one to delete anything. I hit the sync button on the new computer and that didn't help either. I'd really like to upgrade to the new software but don't have the room on my phone until this music/a few apps are deleted. Any help would be appreciated!!
Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.
-
Why can I not make calls on my iphone with the new software update (sprint)
I'm not able to make calls for hours at a time or recieve text messages on my iPhone 4S. This has all started happening after I updated to the new software. HELP?!
Hello Ciddy14,
Thank you for using Apple Support Communities!
First, if you have not already, I would restart the iPhone then try again.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
From: iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next try the troubleshooting in this article:
OS: Troubleshooting Siri
http://support.apple.com/kb/TS4079
And if the issue still persists, I would then backup and restore your phone to iTunes.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Take care,
Sterling -
WHo thought up this system anyway. When I tried to activate find my ipod the system reset my mac.com mail from pop to imap. I WANT IT TO ATAY POP, so that the email on my iMac does not disappear when I remove them from the iPod. Is there a way to do this?
Remove your work email from the Mac email app.
If you are referring to iMessages, you would need to remove that account from iMessages. -
Current CS6/Cloud user but have not been able to process my NEF files from the new Nikon D4s camera. Any idea on when and if a patch or new plug-in supporting this camera will be available?
Support for the Nikon D4S has been added to the forthcoming Camera Raw 8.4 which is currently in a late stage beta (formally called Release Candidate).
https://blogs.adobe.com/lightroomjournal/2014/02/camera-raw-8-4-rc-and-dng-converter-8-4-r c-now-available.html
You can download it now and take it for a spin. Does not work on Mac OS X 10.6.x, Windows XP or Vista.
CC: http://labs.adobe.com/technologies/cameraraw8-4-cc/
CS6: http://labs.adobe.com/technologies/cameraraw8-4/ -
I am unable to sync music to iPad iPhone etc. from 27" iMac with anew hard drive install. Wants an old really old apple I'd and PW that hasn't been in use. What to do?
Hello DeedeeB6075,
Thank you for posting in the Apple Support Communities. It sounds like you have some music that you purchased with an older Apple ID that you don't have access to because your new hard drive needs to be authorized. If you know what the Apple ID is, you can go to https://iforgot.apple.com/ to reset your password.
If you cannot remember the Apple ID, you can follow the steps in this article to find your Apple IDs, and then go to https://iforgot.apple.com/ to reset your password.
Apple ID: Finding your Apple ID
http://support.apple.com/kb/HT5625
I hope this helps get you back on track!
Best,
Sheila M. -
I am trying to hook up my iPhone 5 to my Onkyo TX-8050 receiver and it is not recognizing the phone. It recogized my phone prior to software update 7.1.2 and I can use an iPhone 4 and iPad with no issues. Is there a setting I need to apply for the reciever to recognize?
Im presently on the Phone with Apple the Lady Im talking to understands its the id and not the password. I finally got somebody that listened to me. Wow and she is plesent to talk to.
-
Can not back up my iphone 4 after the new download...Help!
It will not let me backup my iphone or sync. please help!
See: How to Restore from a backup here > iOS: How to back up
-
Can not delete E-Mails after updating to Thunderbird 31.2.0
After updating to Thunderbird Version 31.2.0 today, i am not able to delete E-Mails. Just nothing happens. Even the folder "Papierkorb" dissappeared. Can anyone help?
I first noticed this problem yesterday -- which was also the day I installed TB 31.2.
Rebuilding the folder did not help and I also tried rebuilding the folder for deleted. But I still cannot delete -- either by the DEL key or by dragging some messages to the deleted folder.
Maybe you are looking for
-
while updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me
-
I asked this question a while back in relation to PSE 5 and had no good solution, but recently updated to PSE 9 and was hoping for something better... When I take pictures in burst mode, I get a bunch of pictures, up to 10 fps, with identical timesta
-
Two instances are down on four node physical standby.
Hi There, I am new to oracle. I got following errors: ORA-01105: mount is incompatible with mounts by other instances ORA-01677: standby file name convert parameters differ from other instance 1) I chnged spfile into pfile for 1st instance which is d
-
Cannot complete form using Adobe Reader - Mac OS X 10.6.8
I have been using Adobe Reader to complete forms for my Bank for more than 9 months without any problems. I'm using Adobe Reader 10.1.1 for Mac. I recently upgraded my OS from 10.5.8 to 10.6.8 and this is the first time I've tried to use Adobe Read
-
Outlook 2013 Converstation preview does not show my last reply.
Hello, When I reply to a message from my Inbox, I don't get to see my message unless I go to sent items and check what I just sent there. Is there a way to make it appear at the Conversation preview in my Inbox? I know that it is possible since I've