I am not able to find DataSource 3FI_SL_09_TT in SAP R/3
Hi All,
I am not able to find DataSource 3FI_SL_09_TT in SAP R/3
We are on SAP R/3 ECC 6.0 with Support Patch 15
I want extract the GLT3 table data, I found the above Datasource but, I am not able to find in the RSA5 trasaction code in R/3
Please sugggest
Thanks In Advance
Nilesh Labde
Unlike most DataSources, the 3FI_SL_XX_TT (where XX refers to the Special Ledger - in your case 09 it appears) DataSources have to be generated, instead of being activated in RSA5. To generate the 3FI_SL_XX_TT DataSource for Special Ledger 09 in your ECC source environment, do the following:
1) Go to tcode BW01 in your source ECC environment to generate the DataSource for Special Ledger totals (and line items if you so choose). Be sure to read and follow the directions in a popup that appears when you first enter this transactiont. Basically your refreshing two SAP delivered tables in order to use enhanced functionality for Special Ledger.
2) Upon successful generation of the DataSource, you will then want to create the InfoSource for the Ledger by going to tcode BW03 in your source ECC environment.
Here's some documenation on this: {http://help.sap.com/saphelp_nw70/helpdata/en/6c/743e404e093d3ce10000000a155106/frameset.htm]
Similar Messages
-
Customised Datasource not able to find in Sourcce System
Hi Bob
I have assigned InfoSource to all dataSource masterdata objects (SAP defined)
Now I need to assign few customised msterdata objects,
While assigning i am not able to find datasource in source system.
For Eg:
ZI_OPGRP_TEXT operating group text
ZI_BUSUNT_TEXT Business Unit Text
ZEMPLOYEE_9005_ATTR Legacy Sales Organizational
ZEMPLOYEE_9000_ATTR Legacy Organizational Structure
Thanks
KiranHi
Customized datasource which were missing:
ZJOB_ATTR ,ZI_OPGRP_TEXT ,ZI_BUSUNT_TEXT ,ZEMPLOYEE_9005_ATTR,ZEMPLOYEE_9000_ATTR
As you said i checked in RSA6, Customized Datasource are available, then I came to BW side and replicated Datasource, Now I am able to find below and assigned to infpsource:
ZI_BUSUNT_TEXT ,ZI_OPGRP_TEXT
But I did not find rest of the datasources which i have mentioned above.When I look for these datasources in R/3 system.
Under Modelling > Source system>right click on source system> Display datasource tree> There I am able to find missing datasources, But when I goto Infosource under modelling and try to assign to datasource, I dont find them there.
Please tell me what is the resolution for this. -
Not able to find 0SRM_TD_LA_1 Datasource in SRM
Hi Team,
We are not able to find out the 0SRM_TD_LA_1 - SRM Live Auction Transactional Data
Datasource in SRM system.
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/55/9a39726528490a87c90bf011e34c54/content.htm
Below are the package detail of SRM and BW system.
BW - 702 - 008
SRM - 701 - 004
Kindly help us on this ASAP. We are looking for standard Auction datasource in SRM for create report in BW.
Regards,
AshishGot the solution.
Regards,
Ashish -
Not able to find the related datasources ,, help..
Hi Experts ,
BI with CRM
I am trying to find the relavent Datasources for the below mentioned Tables in CRM ,,plz help to find out the relavent Datasources ,,,I tried in all forms ,but not able to find ,, need your help.
Thanks in advance
Table ::
CRMD_MKTATTR_SET----->>> Datasource???
COMD_PAYPLAN_DC----->>> Datasource???
COMD_PAYPLAN_D------->>> Datasource???
TB033----
>>> Datasource???
ZUCORDSET----
>>>>>Datasource???
Regards
Ramanapackage com.elevenworks.swing.treetable;
//Here i dont have this dependency code
//So i want a jar file for that
import org.jdesktop.swingx.JXTreeTable;
import javax.swing.*;
import javax.swing.tree.TreeCellRenderer;
import java.awt.*;
public class BrushedMetalTreeCellRenderer implements TreeCellRenderer
protected JLabel label;
public BrushedMetalTreeCellRenderer()
label = new JLabel();
public Component getTreeCellRendererComponent(JTree tree, Object value, boolean selected, boolean expanded, boolean leaf, int row, boolean hasFocus)
label.setForeground(Color.BLACK);
if (selected)
Component vRenderPane = tree.getParent();
if (vRenderPane != null)
JXTreeTable vTable = (JXTreeTable)vRenderPane.getParent();
if (vTable != null)
if (vTable.hasFocus())
label.setForeground(Color.WHITE);
label.setText(value.toString());
return label;
} -
Not able to Find Some BOM Related Standard Data Sources in PP.
Dear Gurus,
I am not able to find the Standard Data Sources for Loading the Master Data for the Following Standard Info Objects
1. 0BOM
2. 0COMPONENT
3. 0HG_LV_ITEM
I have activated the objects in BW side, but not able to find the data sources to Get the Data from.Kindly help me out regarding this issue.
with regards
vikram..At least, for BOM i have no found any datasource and any time i had to implemented myself.
-
Not able to find masterdata source from ECC
Dear All,
fist time I'm workin with HCM in SAP BW
I'm not able to find masterdata source in ECC side for below Objects, could any one suggesion me how to find the datasource?
0APPLIC - Application
0CDCY -Candidacy
0POSTING - Job Posting
Candidate - 0CANDIDATE
Activity for Candidacy- 0CDCY_ACT
Requisition - 0REQUI
Application Source - 0APPL_SCR, this master data for 'Recruitment'
Thank you very much in advance
Best Regards,
NarasimhaHi ganesh,
I'm not able to find E-Recrutment Application in RSA5 Tansaction, could you please explain me wt is the next step i should follow?
Best Regards,
Narasimha -
Not able to find help.sap link for SAP CRM
Hi,
I am not able to find the appropiate link for CRM w.r.t. BW where I could find datasources, cubes and queries.
Can anybody please show me the path?
Thanks,
Aksharahello,
here is the complete path ..
''C:\Documents and Settings\XXXXXXX\Application Data\Mozilla\Firefox\Profiles\chrome"
Let me know
Thanks,
Vishal. -
Not able to find 0CRM_MKTATTR_ATTR in CRM 6.0
Hi Experts,
I am working on SAP CRM 6.0. I am not able to find marketing attribute data source 0CRM_MKTATTR_ATTR in ly system. Can you please help me out? I have checked in RSA2/BWA5 and other transactions but i am not able to find this data source.
Any pointers will be much helpful?
Thanks
RohitHI ,
Have you activated the datasource from RSA5 , is it not available in RSA5 also ?
Regards,
Sathya -
Not able to find the infosource and transfer rules in the infosource tab
Hi everyone,
Not able to find the infosource and transfer rules in the infosource tab in Modelling. I was able to see that the infosource is available under nodesnot connected in the transport connection tab. But i cannot see the same in infosource tab. Please advise.I have searched with technical name, I am not able to find it, but when i double click on the datasource .....the transfer rules pop up. Because I have not transported the application component, I am not able to find it. But even though it should be available on the nodesnotconnected, I still cannot see it. Is there a work around this ?
I have also tried rsa1old, it still could not find.
Thanks for your quick response -
Hi All,
Good Evening!
I am loading data from ODS to Cube. I am not able to find values for 0ORDER_CURR in the cube and also in the report which I built on the Cube. But they are present in the ODS.
Please help me to find the problem. Thanks in Advance...
With regards
MahiHi Mahi..
Try to check is there mapping in ur Update rules for this 0ORDER_CURR.. if not then maintain the same..
Also let us know whether u have used this object at the cube level or not??? if not then try to maintain and then maintain the mapping as well from the DSO.....
this will solve the issue....
thanks..
Assign points if this helps... -
Not able to find driver page for HP 15-r007tx
Not able to find driver page for HP 15-r007tx.
The web site is able to detect my product, but when clicked on link Software & Driver Downloads, it says page not found.
Please help. I am looking drivers for windows 7 ultimate.Hi Anoop22Sharma
Install:
Intel Chipset Installation
Intel Video Driver
NVIDIA High-Definition (HD) Graphics Driver
Synaptics Mouse Driver
Realtek Ethernet Controller Drivers
MediaTek(Ralink)802.11 b/g/n Wireless LAN (WLAN) Adapter
Ralink Bluetooth Software Driver
Intel USB 3.0 Driver for Intel 8 and U/Y Series
Realtek High-Definition (HD) Audio Driver
Realtek PCIe Media Card Reader Driver
HP 3D DriveGuard -
Not able to find values in LOV of field "Help Desk" of Global contract
Not able to find values in LOV of field "Help Desk" of Global contract defaults.
This value should be coming from resource setup.
Resource is already created.Issue resolved:
The resource should ahve valid Email id in HR People setup -
I am not able to find Template Builder in MS Word 2003
Hi All,
we have installed MS Word 2003 Ver in our work station for BI Publihser Reports, but i am not able to find the template builder in the Menu bar.
i was try to add in tool -> Template and add-Ins also, but still i dint get the template builder in top menu's.
Any one can help me on this.
Thanks in advance.
Regards,
LoganthanHi,
Did you installed BI Publisher first? usually we installed MS Word first then BI Publisher then it appears in the top bar.
HTH,
Vikas -
Question
If I do not select F11 ( full screen ) a big part of the screen "falls" of the right hand side of my monitor and is not readable, I am not able to find the neccesary adjustments.
Screen 2/3 blanco on the left side
With F11 all OK.Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Not able to find Source System in BI 7......
Hi All,
I am working on BI 7
I am exctracting the data from Flat File Source System like SMID(Characterstic) and PQTY,SALE,PROFIT as a KeyFigures
I have taken SMID as Characterstic and PQTY,SALE,PROFIT as a KeyFigures..
I hav created InfoObject Catalog for Characterstic and Keyfigures...
I Created a Application Componenet and Assigned Objects to InfoSource also...
But i struckked while assigning the Source System to the InfoSource...
I am not able to find how to assign the Source System like we do in 3.0b,3.1c & 3.5..
Can anybody tell me the Step by Step Navigation procedure for to assign Source System to the InfoSource and Other Things also....
Regards,
Kiran TelkarHi,
These are the settings needed for the broadcaster:
http://help.sap.com/saphelp_nw70/helpdata/en/55/1b9940ccd42a54e10000000a1550b0/frameset.htm
Eddy
PS. Reward useful answers and earn points yourself
Maybe you are looking for
-
Can I use a single external drive to maintain time machine backups for two Mac computers?
Hello We have an older mac mini and macbook air. I have one Western Digital external USB drive. Can I use the same drive to hold and maintain time machine backups for both machines? I already have the macbook air time-machined on the WD drive. I n
-
Ihave installed firefox but cant use it as a service for internet i can open it up and after 2 seconds of it loading the slider bar dissapears and the whole web page shifts to the right making only half the page visiable
-
Raw Images not recognised.
WHAT have I done wrong? Running Windows 7 ...Photoshop CS5... But cannot open Raw images from a Nikon D300. The 'Latest' ACR w 6.7.1 is downloaded.. Screen message says it is the wrong sort of document.
-
How to use peak detection in labview to detect peaks from data acquisition information
Hi I am a university engineering student who is working in a team to develop a coin detector, its purpose is to recognize different coinage and detect fakes. For this we are using LabVIEW 8.5.1. I am relatively new to labview and have had no experien
-
Widget Request: Dictionary / Thesaurus
Widget Request: Dictionary / Thesaurus I would love to see Dictionary / Thesaurus from OS X come to the iPhone. I know that Apple will more then likely bring more widgets to the iPhone, but I for one would like to see this as one of the first.