I am not able to install Google Toolbar to Firfox 5.0 version

I am not able to install Google Toolbar to Firfox 5.0 version. error showing that "Google toolbar is not compatible with Firfox 5.0 version", also i am not able to change my home page from speedbit.com to yahoo or any other sites. after applying changes, again it open with speedbit.com. please advise what to do?

Just install this [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/?src=api FF addon], clear your cache and restart FF.
Peace!

Similar Messages

  • Install google toolbar in firfox 4 for all user profiles in a server

    i want to install google toolbar in windows 2008 R2 server for my firefox. i am the administrator for the server, and in that server we have 1200 user profiles, i want to install google toolbar for all the users. how can i do that?

    NOTE: Firefox 5.0 was released some time ago. Firefox 6 is scheduled for release on August 16.
    '''You might want to reconsider installing Google Toolbar because of the following.'''
    Google decided that they will no longer produce the Google Toolbar for Firefox beyond Firefox 4.
    *http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
    *http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
    Alternatives:
    *http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
    *https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
    *https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • Not able to install windows 7

    Hi - I am not able to install windows 7 in my imac (latest version). When I try using the bootcamp, it gets stuck at the place where I am asked to partition the hard disk for the windows system and does not go any further. Has anyone experienced such a scenario?

    This is one method.
    1. Remove 240G SSD from Optibay.
    2. Re-install Optical drive.
    3. Boot from 240G SSD using an external enclosure/SATA-to-USB connector. You can also boot from an external flash drive as mentioned in OS X: Installing OS X on an external volume - Apple Support.
    4. Run BCA and format the 128G for Windows completely.
    5. Install Windows.
    6. Remove the Optical drive and install the 240G SSD and test.

  • Have msg on header: Firefox is not able to show the Toolbar. Please re-install the Toolbar. I cannot figure out how to re-install the Toolbar, nor exactly where to go to find it for download.

    There is a message on my Firefox header that says: "Firefox is not able to show the Toolbar. Please re-install the Toolbar." I would like to re-install the Toolbar, but don't know where to locate it for download. It has conveniences I use frequently & I'd like to get it back. Thank you for your help.

    Firefox has a couple of built-in toolbars, but if it mentions re-installing, it probably is an add-on toolbar. Do you know which one it was, e.g., Google, Yahoo, etc.? It might be on your extensions list here:
    Tools > Options > Extensions

  • I have upgraded My leopard to Mountain lion 10.7 via snow leapeard. Now My itunes is not working properly nor I able to install google chrome successfully. Please help me in this occasion. I am facing following messages.

    Hello Team,
    I have upgraded My leopard to Mountain lion 10.7 via snow leapeard. Now My itunes is not working properly nor I able to install google chrome successfully. Please help me in this occasion.
    Also, I am not being able to upgrade Mac OS X 10.7 to 10.7.4 or letest for lion.
    I am facing following messages when I open itunes ( I down loaded and install new for 10.7)
    Process:         iTunes [463]
    Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier:      com.apple.iTunes
    Version:         10.7 (10.7)
    Build Info:      iTunes-10702101~1
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [273]
    Date/Time:       2012-10-22 23:33:07.226 +0200
    OS Version:      Mac OS X 10.7 (11A390)
    Report Version:  8
    Interval Since Last Report:          4918 sec
    Crashes Since Last Report:           2
    Per-App Crashes Since Last Report:   2
    Anonymous UUID:                      3DE933E2-7A48-4840-91F4-7DC466ED9C26
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
      Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
      Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
    Binary Images:
           0x102a96000 -        0x103c36fff  com.apple.iTunes (10.7 - 10.7) <0CC47E12-134F-A9E1-7E4F-3EAC797C3050> /Applications/iTunes.app/Contents/MacOS/iTunes
        0x7fff62696000 -     0x7fff626cb1ff  dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
    Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.31f1
    Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.5)
    Bluetooth: Version 2.5.0b13, 2 service, 12 devices, 2 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: FUJITSU MHY2160BH, 160.04 GB
    Parallel ATA Device: MATSHITADVD-R   UJ-867
    USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 2
    USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc52f, 0x1d100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x022a, 0x5d200000 / 3
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
    And Google chrome just keep loading the page for hours and nothing is appear on its browser. But safari and firefox working absolutly fine.
    In addition, I have reboot computer as well but it never worked. Please help me in this occasion.
    Eagerly waiting for your response on this issue.
    Best Regards,

    You need to upgrade your copy of MS Office. You're using a version that is 8 years old (at least). You can buy Office 2011, which will work. You could also get a copy of Pages from the App Store, which is cheaper and will open Word files (though not perfectly). Or you could get a free Office clone, like OpenOffice or LibreOffice.

  • When I upgraded to 4.0 it will not show the toolbar "Firefox is not able to show the Toolbar. Please re-install the Toolbar" How do I fix this?

    When I upgraded to 4.0 it will not show the toolbar "Firefox is not able to show the Toolbar. Please re-install the Toolbar" How do I fix this?

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • A gap of 1 row below address bar in firefox browser after I installed Google Toolbar. Unistalling both and then installing just firefox hasn't helped. Any solutions?

    I am not able to remove the 1-inch gap which came just after installing google toolbar. After that, I uninstalled Google Toolbar and Firefox respectively and then again, installed Firefox alone but the gap of 1-inch (1 row) remains just below the address bar of the browser. How to remove it?

    Hi Danieldesira,
    Thanks for the solution, it worked!!! I disabled extensions one by one except Google Toolbar. I observed that the gap was removed only after removing Norton Toolbar 5.6 version. For now, I have removed the toolbar of Norton but it seems necessary for security purpose. Can we keep it on and still hide since in the empty row it generates in Firefox is not showing a single button or anything else.
    Thanks.

  • I can't install Google toolbar to mozilla 5.0 why?

    Why i can't install Google toolbar to my Mozilla 5.0 browser? Kindly provide your valuable replay regarding this issue.

    The answer has been provided by Google, so you will need to start working on the workarounds while you will still be able to use it at all.
    '''The Google Toolbar is no longer supported by Google in Firefox 5 and up''', you may be able to get what you want from it for a limited time, the directions to install the Google Toolbar were posted before Google actually announced dropping support.
    *Enable Google Toolbar in Firefox 5<br>http://googlesystem.blogspot.com/2011/06/enable-google-toolbar-in-firefox-5.html
    *the-edmeister posted a brief evaluation of the situation<br>https://support.mozilla.com/en-US/questions/841736
    In any case you can find several alternative solutions, and you can start working on them now, see
    * "'''Using Google Toolbar features without toolbars'''" <br>http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
    Probably not the answers you were hoping for but it does give you more time and workarounds. It is very unlikely that Google would change their mind as Google Chrome does not have it and both Firefox and Chrome can do everything with or without extensions. Please mark as solved. Have 500 unsolved problems that Firefox is not responsible for makes solving other problems harder to wade through.

  • Z87-G45 Gaming not able to install Win7 x64 with Samsung 840 EVO

    I have a brand new:
    i5 4570
    MSI Z87-G45 Gaming
    250GB Samsung 840 EVO
    1x 8GB Corsair ValueRam DDR3 1600
    I got everything hooked up properly, but I am not able to install Win7 x64 through an USB pen drive (Kingston Datatravel 32GB USB3) I have a proper  official and Legit MSDN ISO, formatted by the Win7 USB tool from MS itself.
    Note that i do not have an optical device (DVD) installed so I cannot use it 'the old way'.
    Bios settings are okay, everything is recognized
    USB Legacy - Kingston Datatraveler
    HDD Legacy - Samsung 840 EVO
    Win7 setup loads properly; but before I can select the Harddrive / SSD to install Win7 on I get prompted that additional (3rd party) drivers are needed to proceed. The volume is not recognized. This happens 9 out of 10 times. In the 10% cases I do get the option to format the SSD and/or create partitions. However, installation fails after all, cannot load or find file ...
    What I've tried so far:
    Switch out the SATA cables and power cables
    Switch through the various SATA ports on the MB 1 through 6
    Tried UEFI and UEFI/Legacy (UEFI doesn't seem to work at all)
    Update UEFI to V 1.50
    All the above result in the case mentioned.
    I have succesfully installed the SSD in an other PC, using the same pen drive and ISO and it worked like a charme, thus ruling out that the SSD, pen drive or image is corrupt.
    Even when I switched out the SSD after Win7 setup has succesfully copied, unpacked and installed all the files (doing this on the other machine where it works like a charm). Then switching it to the MSI Z87...it fails; starting the setup procedure right from the start, like nothing was ever written on the SSD...
    Finally i turned to Win8, and guess what, it installed without any glitches on the MSI Z87
    What am I missing here, I would really want to install Win7 instead of Win8
    Forgot to enable / disable something in the UEFI? I really don't know, google doesn't give much information on this specific problem (SSD is recognized properly by the BIOS / UEFI as far as I can tell)
    The only thing I have not tried out so far is updating the Samsung SSD firmware to the 1.0 version which has been release 3 days ago...
    Any clues, tips, hunches??

    Quote from: Bernhard on 25-October-13, 18:33:41
    Did you disable Secure Boot in the BIOS? If not, then Win7 won't load.
    Hmmm not sure, thanks for the reply, will have to look into that later today!
    I didn't change it from the default setting I think, unless it is part of the Win8 features in the UEFI. All where disabled by default, and I kept them disabled.
    Where is Secure Boot listed in the UEFI, and any idea wether it is enabled by default?
    ::EDIT::
    Found it in some screenshots, I cannot recall from the top of my head wether it was enabled or disabled, allthough my gutt feeling says it already is disabled.
    http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/09-MSI_SnapShot_23.gif
    http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/10-MSI_SnapShot_24.gif
    Nice overview of the entire UEFI btw: http://www.pcper.com/reviews/Motherboards/MSI-Z87-GD65-Gaming-Motherboard-Review/BIOS-Features-continued

  • Not able to Install MS SQL 2008 R2 64 -Bit

    Hi All,
    I am Installing fresh Setup Of MSSQL 2008 R2 On my Server (Microsoft Server 2008 R2 Standard  SP1 64 Bit ) which is domain Controlled. But With Administrative rights I am not able to Install. it shows Following error ,
    POLICY .8.0.Microsoft.VC80.MFC Version ="8.0.50727.1833",public key token = "1fc8b3b9a1e18e3b",processor architecture ="X86",type "win32-policy"
    I found lot of solutions in google search bit still the problem doesn't solves.
    Please guide me for the same
    Thanks
    Ashish

    I am Installing fresh Setup Of MSSQL 2008 R2 On my Server (Microsoft Server 2008 R2 Standard  SP1 64 Bit ) which is domain Controlled. But With Administrative rights I am not able to Install.
    Its not recommended to install SQl Server on domain controller if you are building SQL Server setup for production purpose or even UAT testing its not recommended. Although you can proceed on your own risk MS will not be responsible for any issue arising
    out of it.
    Now can you please post Summary.txt file generated after failed installation. Its location would be
    C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Articles

  • Not able to install scanner part of 'HP PSC 1410 all-in-one'[SOLVED]

    Despite trying instructions in the wiki, checking earlier reports of this problem on the forum and trying on reports from google, I am not able to install the scanner part of 'HP PSC 1410 all-in-one'.  The command 'sane-find-scanner' finds it but 'scanimage -L' does not. Also xsane and simple-scan program do not find it. Any help will be appreciated.
    (I also tried these entries in the udev sane rules:
    ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="4d11", MODE="0664", GROUP="scanner", ENV{libsane_matched}="yes"   
    "SUBSYSTEM=="usb_device", ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="4d11", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", MODE="0666", GROUP="scanner", ENV{libsane_matched}="yes"
    but they do not work).
    Some previous threads:
    https://bbs.archlinux.org/viewtopic.php?id=107474
    https://bbs.archlinux.org/viewtopic.php?id=65431
    Not able to install sane-dev from AUR; 'makepkg -s' gives error:
    ==> WARNING: Cannot find the git binary required to determine latest git revision.
    Last edited by rnarch (2012-03-28 05:05:09)

    Git was not installed. So I installed it and ran 'makepkg -s' again. It ended with following error:
    installing saned.conf in /etc/sane.d/saned.conf...
    installing dll.conf in /etc/sane.d/dll.conf...
    for dir in artec_eplus48u gt68xx snapscan epjitsu ; do \
      /bin/sh ../mkinstalldirs /home/sane-dev/pkg/usr/share/sane/${dir} ; \
      done
    mkdir -p -- /home/sane-dev/pkg/usr/share/sane/artec_eplus48u
    mkdir -p -- /home/sane-dev/pkg/usr/share/sane/gt68xx
    mkdir -p -- /home/sane-dev/pkg/usr/share/sane/snapscan
    mkdir -p -- /home/sane-dev/pkg/usr/share/sane/epjitsu
    /bin/sh ../mkinstalldirs -m 775 -g uucp /home/sane-dev/pkg/var/lock/sane
    Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
    Create each directory DIR (with mode MODE, if specified), including all
    leading file name components.
    Report bugs to <[email protected]>.
    make[4]: *** [install-lockpath] Error 1
    make[4]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
    make[3]: *** [install-data-am] Error 2
    make[3]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
    make[2]: *** [install-am] Error 2
    make[2]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
    make[1]: *** [install] Error 2
    make[1]: Leaving directory `/home/sane-dev/src/sane-backends/backend'
    make: *** [install-recursive] Error 1
    ==> ERROR: A failure occurred in build().
        Aborting...
    Please note the line: Report bugs to <[email protected]>.   Is it a bug?  Sane-dev was successfully installed by others, eg: https://bbs.archlinux.org/viewtopic.php?id=65431
    Last edited by rnarch (2012-03-26 01:11:57)

  • Why does Flash install Google Toolbar?

    Why does Flash install Google Toolbar? Honestly, do you have ANY idea how annoying that behaviour is? I had no option at all to not download it, I could not stop downloading it. I was taking from a "you need to install flash" button on Facebook to the download.
    Honestly things like this make me rage, installing things automatically without an option.
    Until now, I used to think that it was annoying that Apple wouldn't allow flash on some of their devices. Now Adobe pulls **** like this, I'm not surprised. To hell with Flash I say.

    This is a user-to-user forum, and you're "preaching to the choir" here. IT ISN'T going to change, and NO ONE from Adobe management ever sees or reads these pages. Employees are here from time to time but no one who makes these decisions participates in these forums, per company policy. (I used to work for Intuit, and we were strictly prohibitied from posting in their forums. A team leader I worked with was fired for it).
    Links to the FULL installers are posted literally HUNDREDS of times each week throughout these pages by myself, and at least three others I know of, who volunteer in these pages daily.
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    http://get.adobe.com/reader/enterprise/
    I DON'T run Adobe and no one here does, so I won't even beging to discuss business ethics.
    The solutions have been offered, and I recommend you update NOTHING, including your OS, automatically. I don't because I don't want junk like Ask Toolbar, Yahoo Toolbar, Bing Toolbar, Bing Desktop, Norton or McAfee on any of my nine systems.

  • Why cant i install google toolbar with firefox 5

    I am unable to install google toolbar with firefox 5. Is there a solution?

    The Google Toolbar "will not be supported on Firefox 5 and future versions." <br />
    http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
    http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars

  • Why am i not able to install creative cloud?

    Why am i not able to install creative cloud? i paid for the package,  downloaded the installer now its been trying to connect to the server since a day..

    You can check these :
    Creative Cloud Connection Update
    Sign in, activation, or connection errors | CS5.5 and later
    CreativeCloud Manager can't connect to Internet
    Regards
    Rajshree

  • Not able to install onedrive for business, keeps telling its already installed but its not (W7)

    not able to install onedrive for business,  keeps telling its already installed but its not  (W7)
    after a change of the 365 office version OneDrive for business it is not possible to reinstall the software
    it keeps telling me it is already installed.
    I think some settings are still there from the old install.
    how can I remove them or force the reinstall

    yeah finally
    Problem solved! , my tube is back to normal ( to rock )
    all i did is , removed the sys,private,system,resources,data folders from the memory card , switched off my phone , removed the memory card , did a soft reset (*#7370#) and tried to install an application from downloads , i was able to install in the phone memory as memmory card was not inserted then switched off the phone , inserted the memory card and tried to install an application from the downloads, finally i was asked where to install the app. and gave memory card , viola application installed sucessfully
    Regards,
    evil_night13

Maybe you are looking for

  • Error in Workflow For Role Approval

    Hello , While i am approving the request i am getting the following error: Error processing your request, Request no: 2 in stage : ERM_STAGE What could be the cause for this error? Logs are pasted for your reference: 2009-08-19 14:31:40,244 [SAPEngin

  • Patches and packges in 11.5.10.2 for solaris 9 to 10 upgrade

    Hi All, Im upgrading Solaris 9 to Solaris10, what are all the additional OS patches and Packages are required for APPS 11.5.10.2 on Sparc. Thanx in advance.

  • Cannot start G4 at all

    Hi I cant get my mac to do anything except display the grey screen with the apple while it spins as if it will start, but it wont, it just spins. I have done the PRAM and it did seem to do some resetting, I could tell because my screen size displayed

  • How to hide addnl data tab from CVO1N Transction

    Dear Friend's While creation of Document through CVO1N Transction first we fill up the data in "Document Data" tab then system gives"Addnl Data" tab. Here i don't need this "Addnl Data" tab. Pls guide me how i can hide the same tab.Give me the steps

  • Detecting if ctrl is pressed when clicking a button?

    Hi What's the best way to detect if ctrl is being held down while a button on screen is being clicked? Cheers