I am not able to locate office 2011 autorecovery folder as it doesnt exist after updating to mavericks, i am not able to locate office 2011 autorecovery folder as it doesnt exist after updating to mavericks
I am using Maverick, My System got crashed and my work which i was doing on Microsft Word Completely lost, I checked and tried to recover it as suggested by many by doing the following procedure
/Users/ username/Library/Application Support/ Microsoft/Office/Office 2011 AutoRecovery.
but in my system and my partner system after microsoft folder there 4 different folders non of them show office/office 2011 AutoRecovery.
Its no any where in the system, I rechecked is my auto recovery option is active & its active, Every 10 minutes Auto Save the open files.
If anyone had the same issue, Please Advise as i have lost some very important data which is not easy to write down again
HOW TO RECOVER A DOCUMENT SAVED TO OFFICE 2011 AUTORECOVERY:
Click Finder > Go > Hold down the Option key and choose Library > Application Support > Microsoft > Office > Office 2011 AutoRecovery.
Similar Messages
-
I use Office Outlook for mac 2011 to organise my email & calendar. Since updating to OS X Mavericks I have not been able to sync the calendar to my iPhone. What do I need to do to get the calendars syncing again?
Jason The Hague wrote:
Thanks! But seriously why have Apple disabled the info sync on iTunes? By 'Upgrading' to Mavericks I've inadvertantly disabled my Apple mobile devices from fulfilling their function. Come on Apple work with us here!!
Apple told developers they were removing that service over two years ago. The developers that depended upon it should have done something about it.
Why did they remove it? My guess is because it was pretty crappy, was difficult to maintain, and wasn't a good solution for multiple devices that could get the info without tethering to a "base" Mac. -
I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David -
After latest Mavericks update my MacBook Pro will not boot up
After using software update, I believe it said it was a security update. My laptop will not progress past a screen that says " Setting up your Mac...". I have tried holding down the power to restart but it always stops at the same place. I am using a MacBook Pro (17-inch Early 2009) running mavericks.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. Is anyone able to give me a hint how to handle it?
Thank you in advance
arlHi Keith, sorry for my late reply.
Surely I am able to connect to the help function when Icontact the website
of AdobeLR5.The problem is as follows,
When I open LR5 on my computer and work with it and try to open the help
function in the software, I don't get it.
When I bought the CD I was naiv enough to believe that I get an independent
working software. I learned in the meantime, that the seller does not allow
to work with, without being connected to them.
I don't believe that I am paranoid, but I like to buy something and use it
without to inform the supplier that I do it. Otherwise I could have bought
the license fpr LR5 via internet.
Best regards
Karl
2015-01-02 13:42 GMT+01:00 kglad <[email protected]>:
I bought a cd with Lightroom 5. After installation and registration I
am not able to use 'help' function and I cannot update the software. I
anyone able to give me a hint how to handle it? Thank you ind advance Karl
kglad <https://forums.adobe.com/people/kglad?et=watches.email.outcome>
marked Keith_Reeder
<https://forums.adobe.com/people/Keith_Reeder?et=watches.email.outcome>'s
reply on I bought a cd with Lightroom 5. After installation and
registration I am not able to use 'help' function and I cannot update the
software. I anyone able to give me a hint how to handle it? Thank you ind
advance Karl
<https://forums.adobe.com/thread/1669640?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/7059196?et=watches.email.outcome#7059196> -
Microsoft update invited me to update to 14.1.4 today but the process fails with the following error:
"Office 2011 14.1.4 Update can't be installed on this disk. A version of the software required to install this update was not found on this volume."
System info:-
OS X
Build# 12E55
SN# C02jjoNFDRV7
Version 10.8.4
Processor 1.7 GHz Intel Core i5
Memory 4GB 1600 MHz DDR3
Startup Disk:- Macintosh HD - 24.15 GB Availble - 120.47 GB Total.
Partition Map Scheme: GUID Partition Table
What I do ?
1-I Click Verify Volume its get error msg " Disk Utility stopped verifying MAcintosh HD"
2- Volume bitmap needs minor repair for orphaned blocks????!!!
3-Invalid volume free blocks count !!!
4-The Volume MAC HD was found corrupt and need to be repaird!! How to repair???
5-Error: This Disk need to be repaired us...es window appears, Choose Disk Utility.
Please I need Full Support for above problem
Kind Regards,
Anas Al Areefimisalaram wrote:
Csound1@ thanks for reply
i want to install microsoft office in my macbook pro
how can i do tat...plz tell me
Buy a copy of Office for Mac, install it, update it. -
Hi,I have iPhone 4.later I buy this after 30 days home button is not good! Seller shop say update software do this,this problem will fine! I update 2 times,my version is 5.1.1 now! But my home button is not good! I buy and register 8.9.2011! Please help me how I do?
Where are you and where did you get the phone? All iPhones come with a 1 year warranty from the original date of sale.
Make an appointment at the genius bar of your local Apple Store and take it in for them to have a look at. -
After I updated to OS X Maverick I can not open files in Lotus Notes Smart suite. Is there any way to solve this problem?
Ok this worked to solve the error.
Use cmd prompt in windows 7 or 8 and run as admin:
sc config lanmanworkstation depend= bowser/mrxsmb10/nsi
sc config mrxsmb20 start= disabled
No need for all that power shell nonsense as shown elsewhere for windows 8.
That's it. Also force smb2 disabling on the apple side for good measure.
With the above I was able to network mavericks and windows 8.1 pro flawlessly. He issues I had before where I could not read video, ISO and audio files (but could open documents and pictures from the windows machine connected to an apple network share folder went away. -
After the lastest update on iTunes I have not been able to get into the program. I have uninstalled all components and reinstalled and now it is telling me I am missing .dll files. I am so frustrated. I probably lost my entire library except what I purchased
Your library should be safe.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
I had deleted my Apps Icon from the phone as I was trying to update the new version iOS4.3.
However, after deleteing the Icon, I am not able to install the Apps Messenger again because I am not able to use the IOS.4.3 diagnostic password sent via email.
Installation was rejected because I need the iOS.4.3
Thanks for your help
MichaelThat situation went from inconvenient to complicated quickly. Wait for any pending orders to drop off, wait for things to clear up, wait till your upgrade comes up and then upgrade when your contract is fulfilled. I would have suggested a replacement phone, I know, with only a month left why couldn't you just upgrade early, but these situations where people try to upgrade early always end horribly and once a phone order starts, it almost cannot finish until something winds up shipped received and returned. Sorry this happened the way it did. Definitely not efficient.
-
After update iOS7, my iphone 4s not able to connect any Wi-Fi. I tried all the possible ways, but faild.
Settings > General > Reset > Reset Network Settings
-
I uninstalled my itumes after it was unable to update and now it is not even able to be downloaded again HELLLP
After a Firefox upgrade/update, your firewall may not recognize that new version and will not allow access to the internet; that is your firewall doing its job. You may need to
#close Firefox (Firefox button > Exit or File > Exit)
#remove permissions for Firefox from your firewall's programs list
#restart Firefox
#allow your firewall to detect the new version and give the permissions needed by your firewall for Firefox to access the internet.
See --> [http://support.mozilla.com/en-US/kb/Cannot+connect+after+upgrading+Firefox Cannot connect after upgrading Firefox]<br />
See --> [https://support.mozilla.com/en-US/kb/Firewalls#w_configuring-firewalls Firewalls-Configuring firewalls]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
Macbook 4,1
Early 2008 15" macbook pro
Running Snow Leopard
the Battery was not working after only 23 cycles
I tried the Battery update and now it will not boot at all
I really do not want to loose my data on the drive
panic message is
Unable to find driver for this platform: "ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
Please helpPanic Message
panic(cpu 0 caller 0x000x563ebd) : Unable to find driver for this platform:
"ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
Debugger called: <panic>
Backtrace (CPU 0), Format - Frame : Return Address (4 potential args on stack)
(7 lines of hex)
BSD Process name corresponding to current thread: Unkonwn
Kernel version:
Darwin Kernel Version 10.8.0" todays date ; root:xnu-1504.15.3~1/release_I386
I tried to boot from CD can, but i dont want to loose any information.
Tried disk tools
Hardware test
Tried to check if it was memory sticks failing or battery , nothing else plugged in
if i boot holding Apple key and S
I get additional warnings about AppleACPIPlatform and not being able to load Kext -
After updating Airport software, Macbook will not boot
I see others have updated with the new Airport software without incident, but not me.
I just ran software update to install the Airport update (hoping it would cure the problem I've had -- and other users as well -- with the connection dropping every 5 minutes with Linksys routers [check the Airport discussion board for much discussion of this]).
After installing, upon restart my Macbook will not boot fully. I get the Apple symbol, then the spinning gear symbol, then a light blue screen and that's it. After a while the fan comes on.
Call it the light blue screen of death.
All was working fine until the update.
I have boot camp and I can boot into Windows.
I have tried removing the battery and resetting the PRAM. No help.
Sigh... Applecare is closed so I cannot call until Friday morning. Anyone have any suggestions of what I can try?
I have my Mac hard disk backed up from a few days ago using Super Duper on a USB drive but I am reluctant to try booting from it as I fear corrupting the drive. Unfortunately I don't have my Mac system CDs with me as I am away from home at the moment.
I just switched to the Mac 6 weeks ago after 3.5 years with a Dell laptop. Never had a single problem like this in all that time. But I still like my Mac.
PDWell, I spoke too soon. Last night I was able to start up as described above, but this morning when I tried to start it did not even get to the Mac symbol. It just hung at a dark blue screen for several minutes.
Tried restarting with the shift key held down but it would not go into safe mode. Just the dark blue screen.
Resetting PRAM made it startup.
But I'm pretty nervous about this.
So, is there a way in Mac OS X to roll back to the system before the update? In Windows XP this is very simple under System Restore. I have the impression OS X doesn't have this feature and won't until next year with Time Machine.
And I see now I'm not the only user with this problem.
PD -
Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store error 306. I am using windows 7.
(Apologies for butting in, wha.)
now older version is not able to connect to itunes store error 306. I am using windows 7.
If you still get the 306 after updating to 10.6.1.7, perhaps try the following user tip:
iTunes for Windows 9.0.x: Error 306 -
After i updated my iphone 4s from 8.1.2 to 8.1.3 problem occurred.i cant restore and update my phone?saying that iphone could not be restored,an unknown error ocuurred.please help me?
Thanks for the update and clarification. In researching the issue it seems that the 2003 error code may have something to do with the USB connection. I would use this section of one of the above articles:
Get help with iOS update and restore errors
If the USB connection between your device and computer is interrupted, you might not be able to update or restore.
To narrow down the issue, you can try different equipment:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
Solve other issues with the USB connection, then with your security software.
If you still see the error message, check for hardware issues by following the next section.
Check for hardware issues
Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Make sure that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Maybe you are looking for
-
Consuming XI webservice in Dot net application.
I have created a Xi webservice and hosted it on a server.Now I want to consume this webservice in a dot net application. But while consuming it I get a binding error from the webservice.Does anyone has a solution fron this. Do I have to do some XI se
-
Just installed Mountain Lion, and my Mac won't boot correctly. What should I do?
So I stupidly decided to "upgrade" to Mountain Lion this evening. I downloaded ML, installed it, and now whenever I try to boot my Mac I can't get anywhere. The apple logo comes up and the spinning wheel below it starts up, but then it stops and rest
-
Can I download a free exercie video (not from Itunes) to my computer, then to my ipod nano, and then show it on my tv?
-
T60 - Lenovo 2623 laptop and Aluatek STD-19034 Universal Power Adapter
I have a T60 - Lenovo 2623 laptop with a standard power adapter that I got in an office lottery. It is a great system. I wanted to get a second power adapter to have in my day bag for the just-in-case situations and found an Aluatek STD-19034 Univer
-
please help!! urgent !!! can anyone can tell me how to get the PCL code for epson 2170 or 1170 ? Or simply tell me the intialization string for setup the font face and font size ??