I am not able to print double side using HP 2015dn printer using imac

I am not able to print double side using HP 2015dn printer using imac.

I found this information on HP site, but the article was quite old. May still be relevant:
1. Create a multi page document, or something that is more than one page.
2. Go to File/Page Setup.
3. Ensure the printer is listed in the Format for menu.
4. Click OK.
5. Go to File/Print but do not print yet.
6. Change the Copies and Pages menu to 'Layout'.
7. The Two-Sided option will be selectable only if the P2015 is listed in the Printer menu at the top of the print dialogue box.
8. Once you have chosen Long-edged binding, for example, click Print.

Similar Messages

Printing double side

Hi,
I have a problem printing from a network printer, the printer is Toshiba e-studio600-04423023. i wanted to print double side for my pdf file or any word document, but the option in "printing option->layout->two sided" was grey out , i am not able to click on it. The printer have the option of printing double side, as all my colleagues have no problem with it, i will greatly appreciate if any advice is given to me.Thanks
Best Regards,
Juno

Hi PaHu ,
But i don't have the finishing menu (unlike window OS) under the print properties, the closest to "layout" is "paper handling" and i have checked but couldn't find the option to print double side.
Are you saying i need to enable the options on the printer itself ?? i believed the option is already enable unless have to set it specifically for mac user, cos the rest of the guy can able to print without the same prob.
Thanks

How in the world do I print double side on Mac?

My 9999th problem using Mac. I use an Epson.

What printer model are you using? Does it support duplex printing? If it doesn't then you'll have to do it manually. There are numerous websites describing how:
How to Print Double Sided: 16 Steps - wikiHow
How to Print Double Sided Documents on Any Printer: 4 Steps
This Google search lists many more: double sided printing

Hi, im not able to backup all ma contact to my icloud using my iphone 3gs. only 290 out of 600 contact gets backup in icloud, though i hav enough memory. How to fix it ?? I want to transfer my contacts from 3gs to 5s

Hi, im not able to backup all ma contact to my icloud using my iphone 3gs. only 290 out of 600 contact gets backup in icloud, though i hav enough memory. How to fix it ??

I have had similar issues backing up to iCloud. Thy only thing I have found to work every time is backing up to iTunes and then doing a restore to my new device. That includes iPhone 6.

Not Able to Promote DC to server even i am using built in Administrator Account.

hi,
i am facing below mentioned issue from last 4 to 5 days and i am very frustrating about this error and nobody give me a proper solution. if any anybody facing this kind of issue please give me a solution this will very helpful for me.
"Windows Server 2012 domain controllers have a default for the security setting named "Allow cryptography algorithms compatible with Windows NT 4.0" that prevents weaker cryptography algorithms when establishing security channel sessions."
Thanks & Regards,
Sushant Chavan.

Hi Sushant,
>>Not Able to Promote DC to server even i am using built in Administrator Account.
I have seen your thread "Verification of prerequisites for Domain Controller promotion failed" and provided a reply.
Verification of prerequisites for Domain Controller promotion failed
http://social.technet.microsoft.com/Forums/en-US/23f33ffa-a847-47bc-81d4-569f8e195886/verification-of-prerequisites-for-domain-controller-promotion-failed?forum=winserver8gen
In the reply, it provides a step-to-step guidance for setting up a Windows Server 2012 Domain Controller. Have we followed it to promote the server?
Best regards,
Frank Shen

I am not able to log into FaceBook on my macbook pro using my Apple ID

I am not able to log into FaceBook on my macbook pro using my Apple ID

Then, what razmee209 says. It's apparently not a phone issue since other people can get in, so I'd call the facebook app developer and let them know what's going on.

Hi,am not able to open PDF Files in Mozilla Firefox without using plugins...I need Solution

Hi,am not able to open PDF Files in Mozilla Firefox without using plugins...I need Solution

Hello,
Please see the support article below for full information on viewing PDF in Firefox:
[[View PDF files in Firefox without downloading them]]
If you want to use Firefox's built in PDF viewer (i.e. not a plugin) then you will need to ensure that any PDF plugins are uninstalled from Firefox and that 'Preview in Firefox' is selected as the Action for PDF files (see screenshot below).
I hope that helps. Let me know if not.

Iphone 4 sync issue - My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob

My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob??? There are no error codes which appear and the iTUNES just gets hanged, is there a solution?

Remove the song in question from the sync list and see if the rectifies the problem.
If it does, then iTunes believes the song no longer exists on your drive and that will need to be corrected.

I m not able to connect for the wifi which i have used earlier ,i m getting an error as unable to join the network how to resolve this please help me

i m not able to connect for the wifi which i have used earlier ,i m getting an error as unable to join the network how to resolve this please help me

We were able to log in this morning and all is working. You should be able to log in at any point today. Please let us know if you are having any other difficulties.

Cannot enable option to print double sides

When given the printing options in Apple Pages before pressing "print," the option to print 2-sided is set as off and I cannot change the option to print 2-sides.
To be more exact, in Pages, I go to file-print-layout-and the two-sided option is grey and unclickable.
I had to manually print one side and print the other side seperately but I would rather do it all at once.

Hi,
Do you see the option to perform manual duplexing but not being prompted to reload the printed sheets or may you do't see any such option anymore?
If you found the option but the device attention light bliks without showing any prompt on your Mac, reload the printed sheets faced down, then open and close the top cartridge access door to resume the 2nd side printing.
Hope that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can't print double-sided on my HP printer (laserjet CP2025)

I have owned an HP laptop and printer (color laserjet CP 2025) for about one year. When I purchased the printer it said that the printer was not compatible with Windows 7 - I did not know this before i purchased the printer. I had to reset my computer recently and now do not have the ability to print double-sided. The printer works but I cannot print double-sided unless I manually insert the pages. I had the ability to print double-sided before I reset the computer. HELP! this is the most frustrating experience and I am hesitant to purchase another HP product because OF THIS BAD EXPERIENCE. When under warranty I was able to contact HP and received information on how to get the printer to be fully functional, I can't do that now. Does anyone know how to get this function working? Please help.
This question was solved.
View Solution.

asp29,
For the cp2025, if you have the duplex model (has d in the model name) then this document will help you re-set the printer when using the Unversial Print Driver. Make sure you read the document all the way through and pay sepecial attention to the notes as they explain the process in relation to this product. Please check it out...
Unable to Print in Color or Unable to Auto-Duplex (Two-Sided Printing Fails) after installing the UP...
Here is another document on how to configure Auto-duplex on the cp2025dn model printers:
HP Color LaserJet CP2025dn/x Printers - Configure Auto-Duplex, 2-sided Printing On Both Sides
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Not able to upload file in DMS(Document Mang. system) using Web dynpro ABAP

Hi All,
I am facing a problem while uploading the file into the DMS ( Document Management System ) from Webdnrpo .
I am using the BAPI - BAPI_DOCUMENT_CREATE2 to create the document .
CASE - 1
when i am providing the storage category mention below and no data carrier1
ls_documentfiles-storagecategory = 'ZHMEL_CS'. it is not able to upload the document in the DMS system and when i check
in the debugg mode it giving error as ""Error while checking in and storing: C:\TEST.TXT "" .
CASE - 2
When i am not using the storage category and providing the the data carrier as default
ls_documentdata-DATACARRIER1 = 'DEFAULT'. It is able to create the document in the DMS but i am not able to read that document .
I checked with DMS Consultant that DMS is configured for ZOL ( documenttype) with a storage category as 'ZHMEL_CS'.
The code which i have used is below :
ls_documentdata-documenttype = 'ZOL'.
ls_documentdata-documentversion = '00'.
ls_documentdata-documentpart = '000'.
ls_documentdata-description = 'Test Document'.
ls_documentdata-laboratory = '001'.
ls_documentdata-WSAPPLICATION1 = 'TXT'.
ls_documentdata-DOCFILE1 = 'C:\TEST.TXT'.
ls_documentdata-SAVEDOCFILE1 = 'C:\TEST.TXT'.
*ls_documentdata-FILESIZE1 = 000000000000.
*ls_documentdata-FILESIZE2 = 000000000000.
ls_documentdata-WSAPPLICATION1 = 'TXT'.
ls_documentfiles-DOCUMENTTYPE = 'ZOL'.
ls_documentfiles-DOCUMENTPART = '000'.
ls_documentfiles-DOCUMENTVERSION = '00'.
ls_documentfiles-storagecategory = 'ZHMEL_CS'.
ls_documentfiles-WSAPPLICATION = 'TXT'.
ls_documentfiles-DOCPATH = 'C:\'.""lv_filename.
ls_documentfiles-DOCFILE = 'TEST.TXT'."lv_filename.
ls_documentfiles-description = 'Test Document'.
ls_documentfiles-language = 'EN'.
ls_documentfiles-CHECKEDIN = 'X'.
APPEND ls_documentfiles to lt_documentfiles .
*&----Fill Descriptions
w_descr-language = 'EN'.
w_descr-language_iso = 'EN'.
w_descr-description = 'Test'.
append w_descr to lt_descr.
clear w_descr.
**w_hostname = 'HMEL-DV1R3_DR3_00'.
CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
EXPORTING
documentdata = ls_documentdata
*hostname = 'content-srv'
*pf_http_dest = 'SAPHTTPA'
*pf_ftp_dest = 'SAPFTPA'
IMPORTING
DOCUMENTNUMBER = lv_DOCUMENTNUMBER
return = gv_return
TABLES
documentdescriptions       = lt_descr
documentfiles              = lt_documentfiles.
Please let me know your valuable inputs on the same ..
Edited by: Omm Awasthi on Dec 30, 2010 12:22 AM
Edited by: Omm Awasthi on Dec 30, 2010 12:25 AM

Hi omm , from functional side your require a document type and content repository
I have used below code in a function module to create document , we have create object link as PO to the doc.
FUNCTION ZFM_SR_CREATE_FROM_EXTERNAL .
""Local Interface:
*" IMPORTING
*"     VALUE(IV_DOCUMENTNUMBER) TYPE DOKNR OPTIONAL
*"     VALUE(IV_DOCUMENTTYPE) TYPE DOKAR OPTIONAL
*"     VALUE(IV_DOCUMENTVERSION) TYPE DOKVR OPTIONAL
*"     VALUE(IV_DOCUMENTPART) TYPE DOKTL_D OPTIONAL
*"     VALUE(IV_STORAGE_CAT) TYPE CV_STORAGE_CAT OPTIONAL
*"     VALUE(IV_DOKST) TYPE DOKST OPTIONAL
*"     VALUE(IT_DM_FILES) TYPE ZDM_TT_FILES OPTIONAL
*"     VALUE(IV_EBELN) TYPE EBELN
*" EXPORTING
*"     VALUE(EV_DOCUMENTNUMBER) TYPE DOKNR
*"     VALUE(ES_RETURN) TYPE BAPIRET2
V00.00 DD.MM.YYYY                                                   *
*********************New Method of Uploading File*********************************
CONSTANTS path_name    TYPE dms_path
           VALUE '/tmp/'.
CONSTANTS log TYPE dms_path VALUE '/tmp/logFO.txt'.
DATA: ls_draw TYPE bapi_doc_draw2,
        lt_documentfiles TYPE TABLE OF bapi_doc_files2,
        ls_documentfiles TYPE bapi_doc_files2,
        ls_dm_files TYPE zdm_files,
        lv_filename TYPE string,
        lv_ext TYPE string,
        lv_file_type TYPE draw-dappl,
        lv_file_name TYPE dms_path,
        lv_msg(80) TYPE c,
        lt_objectlinks TYPE TABLE OF bapi_doc_drad,
        ls_objectlinks TYPE bapi_doc_drad,
        lv_ebelp   TYPE ebelp
Prepare Data
MOVE iv_documentnumber TO ls_draw-documentnumber.
MOVE iv_documenttype TO ls_draw-documenttype.
MOVE iv_documentversion TO ls_draw-documentversion.
MOVE iv_documentpart TO ls_draw-documentpart.
ls_draw-statusextern = iv_dokst.
ls_draw-statusintern = iv_dokst.
ls_draw-username = sy-uname.
LOOP AT it_dm_files INTO ls_dm_files.
    SPLIT ls_dm_files-filepath AT '.' INTO lv_filename lv_ext.
    CALL FUNCTION 'CV120_DOC_GET_APPL'
      EXPORTING
        pf_file   = ls_dm_files-filepath
      IMPORTING
        pfx_dappl = lv_file_type.
    TRANSLATE lv_file_type TO UPPER CASE.
    OPEN DATASET log FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
    TRANSFER lv_ext TO log.
    ls_documentfiles-wsapplication = lv_file_type.
    TRANSLATE ls_documentfiles-wsapplication TO UPPER CASE.
    CONCATENATE path_name
                       lv_filename
                        lv_ext
                        INTO lv_file_name.
    CONDENSE lv_file_name NO-GAPS.
    TRANSFER lv_file_name TO log.
    OPEN DATASET lv_file_name FOR OUTPUT IN BINARY MODE MESSAGE lv_msg.
*Transfer Attachment Content to Application Server
    TRANSFER ls_dm_files-content TO lv_file_name.
    CLOSE DATASET lv_file_name.
    TRANSFER 'move data to lt_files' TO log.
    ls_documentfiles-storagecategory = iv_storage_cat.
    ls_documentfiles-docfile = lv_file_name.
    ls_documentfiles-DOCUMENTVERSION = IV_DOCUMENTVERSION.
    APPEND ls_documentfiles TO lt_documentfiles.
    CLEAR lv_file_name.
    CLOSE DATASET log.
ENDLOOP.
IF iv_ebeln IS NOT INITIAL.
    ls_objectlinks-objecttype = 'EKPO'.
    SELECT SINGLE ebelp INTO lv_ebelp FROM ekpo WHERE
                                      ebeln = iv_ebeln
                                      AND loekz eq space.
    CONCATENATE iv_ebeln lv_ebelp INTO ls_objectlinks-objectkey.
    APPEND ls_objectlinks TO lt_objectlinks.
ENDIF.
CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
   EXPORTING
     documentdata   = ls_draw
     pf_ftp_dest    = 'SAPFTPA'
     pf_http_dest   = 'SAPHTTPA'
   IMPORTING
     documentnumber = ev_documentnumber
     return         = es_return
   TABLES
     objectlinks          = lt_objectlinks
     documentfiles = lt_documentfiles.
DATA:   ls_doc_data type bapi_doc_draw2,
   ls_doc_datax type bapi_doc_drawx2,
   ls_return type bapiret2.
Set value for document data
ls_doc_data-statusextern = 'IW'.
ls_doc_data-statusintern = 'IW'.
Set value for document data check
ls_doc_datax-statusextern = 'X'.
ls_doc_datax-statusintern = 'X'.
CALL FUNCTION 'BAPI_DOCUMENT_CHANGE2'
EXPORTING
    DOCUMENTTYPE               = 'ROS'
    DOCUMENTNUMBER             = IV_DOCUMENTNUMBER
    DOCUMENTPART               = IV_DOCUMENTPART
    DOCUMENTVERSION            = IV_DOCUMENTVERSION
    DOCUMENTDATA               = ls_doc_data
    DOCUMENTDATAX              = ls_doc_datax
HOSTNAME                   =
DOCBOMCHANGENUMBER         =
DOCBOMVALIDFROM            =
DOCBOMREVISIONLEVEL        =
SENDCOMPLETEBOM            = ' '
      pf_ftp_dest    = 'SAPFTPA'
      pf_http_dest   = 'SAPHTTPA'
CAD_MODE                   = ' '
ACCEPT_EMPTY_BOM           = ' '
IMPORTING
   RETURN                     = ls_return
TABLES
CHARACTERISTICVALUES       =
CLASSALLOCATIONS           =
DOCUMENTDESCRIPTIONS       =
OBJECTLINKS                =
DOCUMENTSTRUCTURE          =
   DOCUMENTFILES              = lt_documentfiles.
LONGTEXTS                  =
COMPONENTS                 =
move es_return to ES_RETURN.
IF es_return-type CA 'EA' ."NE 'E' AND es_return-type NE 'A'.
    "do nothing
ELSE.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait = 'X'.
ENDIF.
LOOP AT lt_documentfiles INTO ls_documentfiles.
    DELETE DATASET ls_documentfiles-docfile.
ENDLOOP.
ENDFUNCTION.

ADRMS::- Clients are not able to open document which permission were restricted by using ADRMS!

Infrastructure:- (i) One Sql Server 2005 running on Windows server 2003 SP2 for RMS Database Storage.
                         (ii) ADDC & ADCS (no web enrollment) running on Windows server 2003 SP2. (FFL & DFL set to 2003)
                         (iii) ADRMS Running on Windows Server 2008.
                         (iv) Clients are using either Windows 7 with Office2010 pro or Windows 8 with Office 2013.
Question: Users are able to connect ADRMS Server and restrict permission to their documents without any issue. BUT CANNOT open the restricted document even by the owner/administrator. Whenever they try to open restricted docs a message appears " Cannot
configure your computer for Information Right Management at this time. Contact your administrator if this problem continues. "
I checked > 'rms.company.com' is added to local intranet site using IE.
So far I think clients computers are not able to retrieve the rms url.
Kindly, suggest how should I approach to the solution.
NB:- I am new to ADRMS.

Hi Ashim Kumar Nath,
Have you registered SCP when installing ADRMS? If you can't remember, you can check this running ADSI Edit, connect to the configuration container in verify if those nodes exist CN=Configuration [server name], CN=Services, CN=RightsManagementServices,
CN=SCP. Right click on SCP and verify that serviceBindingInformation contains your https://rms.company.com/_wmcs/certification server name.
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

Not able to open MS Excel attachment in the email Using SO_NEW_DOCUMENT_ATT

Hi, I am not able to open the attached MS excel in the mail its giving error as "Problems came up in the following areas during load Table". My requirement is to send a colored excel as attachment through mail when the program is executed in background. For this i have reffered the following link " http://wiki.sdn.sap.com/wiki/display/Snippets/FormattedExcelasEmailAttachment". That is i have used the XML method for this . I would be thankful if you can let me know where i am doing the mistake For refference i am pasting my code: * Send mail when executed in background mode IF sy-batch eq 'X'. PERFORM send_mail_bkgrnd. ELSE. " Foreground mode PERFORM build_layout. PERFORM build_field_cat. PERFORM display. ENDIF. FORM SEND_MAIL_BKGRND . PERFORM process_xml_data. PERFORM disatch_mail. ENDFORM. " SEND_MAIL_BKGRND &---- *& Form PROCESS_XML_DATA &---- FORM PROCESS_XML_DATA . DATA lv_xlwidth TYPE i. * Creating a ixml Factory l_ixml = cl_ixml=>create( ). * Creating the DOM Object Model l_document = l_ixml->create_document( ). * Create Root Node 'Workbook' l_element_root = l_document->create_simple_element( name = 'Workbook' parent = l_document ). l_element_root->set_attribute( name = 'xmlns' value = 'urn:schemas-microsoft-com:office:spreadsheet' ). ns_attribute = l_document->create_namespace_decl( name = 'ss' prefix = 'xmlns' uri = 'urn:schemas-microsoft-com:office:spreadsheet' ). l_element_root->set_attribute_node( ns_attribute ). ns_attribute = l_document->create_namespace_decl( name = 'x' prefix = 'xmlns' uri = 'urn:schemas-microsoft-com:office:excel' ). l_element_root->set_attribute_node( ns_attribute ). * Create node for document properties. r_element_properties = l_document->create_simple_element( name = 'TEST_REPORT' parent = l_element_root ). l_value = sy-uname. l_document->create_simple_element( name = 'Author' value = l_value parent = r_element_properties ). * Styles r_styles = l_document->create_simple_element( name = 'Styles' parent = l_element_root ). * Style for Header r_style = l_document->create_simple_element( name = 'Style' parent = r_styles ). r_style->set_attribute_ns( name = 'ID' prefix = 'ss' value = 'Header' ). r_format = l_document->create_simple_element( name = 'Font' parent = r_style ). r_format->set_attribute_ns( name = 'Bold' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Interior' parent = r_style ). r_format->set_attribute_ns( name = 'Color' prefix = 'ss' value = '#92D050' ). r_format->set_attribute_ns( name = 'Pattern' prefix = 'ss' value = 'Solid' ). r_format = l_document->create_simple_element( name = 'Alignment' parent = r_style ). r_format->set_attribute_ns( name = 'Vertical' prefix = 'ss' value = 'Center' ). r_format->set_attribute_ns( name = 'WrapText' prefix = 'ss' value = '1' ). r_border = l_document->create_simple_element( name = 'Borders' parent = r_style ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Bottom' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Left' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Top' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Right' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). * Style for Data "Color properties are set over here r_style1 = l_document->create_simple_element( name = 'Style' parent = r_styles ). r_style1->set_attribute_ns( name = 'ID' prefix = 'ss' value = 'Data' ). r_border = l_document->create_simple_element( name = 'Borders' parent = r_style1 ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Bottom' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Left' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Top' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Right' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). * Worksheet r_worksheet = l_document->create_simple_element( name = 'Worksheet' parent = l_element_root ). r_worksheet->set_attribute_ns( name = 'Name' prefix = 'ss' value = 'Sheet1' ). * Table r_table = l_document->create_simple_element( name = 'Table' parent = r_worksheet ). r_table->set_attribute_ns( name = 'FullColumns' prefix = 'x' value = '1' ). r_table->set_attribute_ns( name = 'FullRows' prefix = 'x' value = '1' ). * Column Formatting DO 32 TIMES. CASE sy-index. WHEN 1. lv_xlwidth = '300'. WHEN 2. lv_xlwidth = '300'. WHEN OTHERS. lv_xlwidth = '300'. ENDCASE. PERFORM clmn_formatting USING lv_xlwidth. ENDDO. * Blank Row r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). * Column Headers Row r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). r_row->set_attribute_ns( name = 'AutoFitHeight' prefix = 'ss' value = '1' ). * VC. No. r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ). r_data = l_document->create_simple_element( name = 'Data' value = 'VC No.' parent = r_cell ). r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ). * Source r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ). r_data = l_document->create_simple_element( name = 'Data' value = 'Source' parent = r_cell ). r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ). DO 30 TIMES. * * TPLGRP r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ). r_data = l_document->create_simple_element( name = 'Data' value = '' parent = r_cell ). r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ). ENDDO. * Blank Row after Column Headers r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). DO 32 TIMES. r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ). ENDDO. * Data Table CLEAR gs_output. LOOP AT gt_output INTO gs_output. r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). DO 32 TIMES. CASE sy-index. WHEN 1. a_dvalue = gs_output-vc_number. WHEN 2. a_dvalue = gs_output-source. WHEN 3. a_dvalue = gs_output-tplgrp_01. WHEN 4. a_dvalue = gs_output-tplgrp_02. WHEN 5. a_dvalue = gs_output-tplgrp_03. WHEN 6. a_dvalue = gs_output-tplgrp_04. WHEN 7. a_dvalue = gs_output-tplgrp_05. WHEN 8. a_dvalue = gs_output-tplgrp_06. WHEN 9. a_dvalue = gs_output-tplgrp_07. WHEN 10. a_dvalue = gs_output-tplgrp_08. WHEN 11. a_dvalue = gs_output-tplgrp_09. WHEN 12. a_dvalue = gs_output-tplgrp_10. WHEN 13. a_dvalue = gs_output-tplgrp_11. WHEN 14. a_dvalue = gs_output-tplgrp_12. WHEN 15. a_dvalue = gs_output-tplgrp_13. WHEN 16. a_dvalue = gs_output-tplgrp_14. WHEN 17. a_dvalue = gs_output-tplgrp_15. WHEN 18. a_dvalue = gs_output-tplgrp_16. WHEN 19. a_dvalue = gs_output-tplgrp_17. WHEN 20. a_dvalue = gs_output-tplgrp_18. WHEN 21. a_dvalue = gs_output-tplgrp_19. WHEN 22. a_dvalue = gs_output-tplgrp_20. WHEN 23. a_dvalue = gs_output-tplgrp_21. WHEN 24. a_dvalue = gs_output-tplgrp_22. WHEN 25. a_dvalue = gs_output-tplgrp_23. WHEN 26. a_dvalue = gs_output-tplgrp_24. WHEN 27. a_dvalue = gs_output-tplgrp_25. WHEN 28. a_dvalue = gs_output-tplgrp_26. WHEN 29. a_dvalue = gs_output-tplgrp_27. WHEN 30. a_dvalue = gs_output-tplgrp_28. WHEN 31. a_dvalue = gs_output-tplgrp_29. WHEN 32. a_dvalue = gs_output-tplgrp_30. ENDCASE. PERFORM fill_data_val_excel USING a_dvalue. ENDDO. CLEAR gs_output. ENDLOOP. * Creating a Stream Factory l_streamfactory = l_ixml->create_stream_factory( ). * Connect Internal XML Table to Stream Factory l_ostream = l_streamfactory->create_ostream_itable( table = l_xml_table ). * Rendering the Document l_renderer = l_ixml->create_renderer( ostream = l_ostream document = l_document ). l_rc = l_renderer->render( ). * Saving the XML Document l_xml_size = l_ostream->get_num_written_raw( ). ENDFORM. " PROCESS_XML_DATA &---- *& Form DISATCH_MAIL &---- FORM DISATCH_MAIL . DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE. DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE. DATA: objbin LIKE solix OCCURS 10 WITH HEADER LINE. DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE. DATA: reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE. DATA: doc_chng LIKE sodocchgi1. DATA: tab_lines LIKE sy-tabix. DATA: l_num(3). DATA: subj_date(10) TYPE c. * Mail Subject data lv_date TYPE d. lv_date = sy-datum. CONCATENATE lv_date6(2) '-' lv_date4(2) '-' lv_date+0(4) INTO subj_date. CONCATENATE 'SAP Application Usage Report ' subj_date INTO doc_chng-obj_descr SEPARATED BY space. * Mail Contents objtxt = 'Dear User,'. APPEND objtxt. CLEAR objtxt. APPEND objtxt. CONCATENATE 'Please find the attached SAP Application Usage Report for ' subj_date INTO objtxt SEPARATED BY space. " Mail Contents APPEND objtxt. CLEAR objtxt. APPEND objtxt. objtxt = 'Thanks & Regards,'. APPEND objtxt. objtxt = 'Himanshu Kanekar'. APPEND objtxt. DESCRIBE TABLE objtxt LINES tab_lines. READ TABLE objtxt INDEX tab_lines. doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ). * Packing List For the E-mail Body objpack-head_start = 1. objpack-head_num = 0. objpack-body_start = 1. objpack-body_num = tab_lines. objpack-doc_type = 'RAW'. APPEND objpack. * Creation of the Document Attachment LOOP AT l_xml_table INTO wa_xml. CLEAR objbin. objbin-line = wa_xml-data. APPEND objbin. ENDLOOP. DESCRIBE TABLE objbin LINES tab_lines. objhead = 'SAP Login Details'. APPEND objhead. * Packing List For the E-mail Attachment objpack-transf_bin = ''."'X'. objpack-head_start = 1. objpack-head_num = 0. objpack-body_start = 1. objpack-body_num = tab_lines. CONCATENATE 'SAP_Login_Details' subj_date INTO objpack-obj_descr SEPARATED BY space. objpack-doc_type = 'XLS'. objpack-doc_size = tab_lines * 255. APPEND objpack. * Target Recipent CLEAR reclist. reclist-receiver = reclist-rec_type = 'U'. APPEND reclist. * Sending the document CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1' EXPORTING document_data = doc_chng put_in_outbox = 'X' commit_work = 'X' TABLES packing_list = objpack object_header = objhead contents_txt = objtxt contents_hex = objbin receivers = reclist EXCEPTIONS too_many_receivers = 1 document_not_sent = 2 operation_no_authorization = 4 OTHERS = 99. ENDFORM. " DISATCH_MAIL

Refer:
http://www.sap-img.com/abap/sending-mail-with-attachment-report-in-background.htm
http://www.saptechies.com/sending-mail-with-attachment-report-in-background/

Not able to pass portal login page with valid credentials using WebDispatch

Hi,
We are implementing SAP BillerDirect Portal. To make BillerDirect Portal available over the internet, we Configured SAP WebDispatcher with SSL termination. We followed the steps mentioned in SAP Help Documentaion for SAP WebDispatcher with SSL termination.
http://help.sap.com/saphelp_nw2004s/helpdata/en/76/6d4fa247d0d647b5bd40745400d873/frameset.htm
We created certificate and send it to CA (TrustCenter CA). We received the CA response and we imported the certificate.
AS mentioned in the help document, we configured the SAP Web Dispatcher profile to support SSL termination
We tried to access our BillerDirect Portal over the internet using below link
https://company.com/bd
We are getting login page, once we enter correct user ID and Password, portal is not loading (not going to next page) portal remains on same login page.
If we enter invalid credentials portal login page is giving u201CUser Authentication Failedu201D error.
If we try to access any portal login pages which brings a pop-up for login, login gets succeeded and we are able to see next pages
Examples
1) https://company.com/bd/admin/xcm/init.do
2) https://company.com/monitoring/SystemInfo
All pages which bring up portal login page without pop-up, not able to pass through portal login screen.
We Tried the ProxyMapping option on Dispatcher using Visual admin. This option also didnu2019t work for us.
Here is the WebDispatcher Profile
SAPSYSTEMNAME = xxx
SAPGLOBALHOST = xxxxx
SAPSYSTEM = 00
INSTANCE_NAME = W00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
rdisp/mshost = hostnameofportalserver with FQDN
ms/http_port = 8101
Configuration for medium scenario
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTPS,PORT=443
icm/server_port_1 = PROT=HTTP,PORT=80
icm/HTTPS/verify_client = 0
SAP Web Dispatcher Web Administration
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=D:\usr\sap\xxx\W00\data\icmanroot\admin,AUTHFILE= D:\usr\sap\xxx\SYS\global\security\data\icmauth.txt
Parameters for the SAP Cryptographic Library
ssl/ssl_lib = D:\usr\sap\xxxW00\sapcrypto.dll
ssl/server_pse = D:\usr\sap\xxx\W00\sec\SAPSSLS.pse
ssf/name = D:\usr\sap\xxx\W00\sec\SAPSSLS.pse
ssf/ssfapi_lib = D:\usr\sap\xxx\W00\sapcrypto.dll
sec/libsapsecu = D:\usr\sap\xxx\W00\sapcrypto.dll
wdisp/ssl_cred = D:\usr\sap\xxx\W00\sec\SAPSSLC.pse
Parameters for Using SSL to the backend server
wdisp/ssl_encrypt = 1
wdisp/ssl_auth = 1
wdisp/ssl_cred = D:\usr\sap\xxxW00\sec\SAPSSLC.pse
wdisp/ssl_certhost = hostnameofportalserver with FQDN
wdisp/ssl_ignore_host_mismatch = true
#ICM Parameters
icm/HTTP/j2ee_0 = PREFIX=/, HOST =hostnameofportalserver with FQDN PORT=50000,SPORT=50001, SSLENC=1,TYPE=1, CRED =D:\usr\sap\xxx\W00\sec\SAPSSLC.pse
We also tried below options in WebDispatcher profile but we are getting same problem.
wdisp/add_client_protocol_header = true
wdisp/add_clientprotocol_header = 1
wdisp/ssl_ignore_host_mismatch = true
#ICM Parameters
icm/HTTPS/forward_ccert_as_header = true
icm/HTTPS/trust_client_with_issuer = *
icm/HTTPS/trust_client_with_subject = *
we also tried
wdisp/ssl_encrypt = 0
wdisp/ssl_auth = 0
we also tried
wdisp/ssl_encrypt = 2
wdisp/ssl_auth = 2
We are not able to resolve issue. Please help us on resolving this issue.
Thanks
Praveen

' in Host Names is not allowed. Our hosname has '_'.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm

I am not able to print double side using HP 2015dn printer using imac

Similar Messages

Maybe you are looking for