I am not able to print or to do a print preview with firefox 5. The problem happens with my Xerox Laser printer and also with Bullzip PDF printer. All prints are white with the printer and empty with the PDF printer.
I have a Phaser 6280DN and Bullzip (PDF virtual printer). They work perfectly with firefox 4 and with other application on my notebook running Windows Vista. But I am not able to print with firefox 5. All prints are white or empty. My notebook is a Dell Vostro 1710 with 3GB RAM and 500GB HD.
LytKT wrote:
We called the internet company and from their end everything was working.
Your ISP can only determine that their equipment is responding to ping requests. They can determine nothing about your equipment or if theirs is communicating with it.
Disconnect the Ethernet cable that comes from their equipment and connect it directly to a computer instead of the Extreme. If you can load web pages, it means your Internet connection is working. If not, it's not.
Is your ISP supplying cable Internet? Sometimes it is necessary to reset your ISP's connection by disconnecting their coaxial cable that connects to their modem. Literally unscrew it and leave it detached for a minute or so, then screw it back in again and power up the modem. They call this a "full reset". I don't know how it differs from simply powering down the modem, but I have confirmed that on rare occasions doing this will reset a recalcitrant connection.
... however the internet bars are present on the desktop and also indicated I was connected to the internet.
The Wi-Fi icon "bars" show that a connection to a wireless network has been established. It conveys no information about an Internet connection that lies beyond your local network. Option-click that menu and select "Open Wireless Diagnostics..." Authenticate with your Admin name and password and click the Continue button. Some useful diagnostic information and suggestions will result.
Similar Messages
-
As I downloaded new software upgrade in my iPod nano 7 th gen and also new iTunes upgrade then all data on my iPod got erased and now when I am trying to sync it again then sync button is disabled on the windows screen . Kindly help
From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod. -
I have searched for solutions to the error 13019, but everyone with the problem doesn't manually manage their music like I do. I really don't want to have to sync and go through that mess. Please Help! solution for manually managing videos and music!!
- Make an appointment at the Genius Bar of an Apple store and hear what they hae to say. It is free.
Apple Retail Store - Genius Bar
you can turn on Assistive Touch it adds the Power and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch -
Hi I have iPhone 4 with iOS 6 and a week ago I stop ressiv or send SMS. I tried everything but I still can't send.. I erase the version and all the data on the iPhone and now I can send SMS. But when I'm downloading my buck up the problem happened again
Please help me cuse I don't know what to do and my cellular company don't have an answer
Thank uI have to ad that its not an easy problem I did all the action in the book.
It's something with my back up -
I don't have the original laptop my iphone was set up on. I have backed up all my data on icloud. If I sync with my new laptop and erase all my contents(restore to factory settings), can I then get it all from icloud?
I have the same problem as the emails go to my iCloud account that I cannot access!!! I cannot answer the security questions as someone else must have set up my iCloud account. Nothing seems to work. It would be great if someone has some ideas as what can be done to recover the situation?
-
just bought an iMac and use iCloud. calendar appointments on iMac are displayed 24 hours out of sync with the iPhone. the iPad and macbook air pick up the same information correctly. why is this?
Hi smokeondz,
Thanks for visiting Apple Support Communities.
If your iCloud calendar entries are not displaying as expected, start with the troubleshooting steps in this article:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Best Regards,
Jeremy -
when i was scrolling through my camera role today before i updated and like 100 + pictures turned into a picture thats white then says PNG. Cant see the picture. What should i do?
I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?
-
Revision: 4293
Author: [email protected]
Date: 2008-12-11 21:18:10 -0800 (Thu, 11 Dec 2008)
Log Message:
Timer usage cleanup to ensure all listeners are fully removed once we're done with the underlying Timer.
QA: No
Doc: No
Checkintests Pass: Yes
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/Channel.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/MultiTopicConsumer.asRevision: 4293
Author: [email protected]
Date: 2008-12-11 21:18:10 -0800 (Thu, 11 Dec 2008)
Log Message:
Timer usage cleanup to ensure all listeners are fully removed once we're done with the underlying Timer.
QA: No
Doc: No
Checkintests Pass: Yes
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/Channel.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/MultiTopicConsumer.as -
Hi,
The selected folder icon is disable wben i try ti sync photos from.
All folders option is by defaultselected..i cannot selected the specific folder option
Please assist how i should enable the selected folder option
Thanks
CharmieHi,
The selected folder icon is disable wben i try ti sync photos from.
All folders option is by defaultselected..i cannot selected the specific folder option
Please assist how i should enable the selected folder option
Thanks
Charmie -
Trying to install Brother MFC-j475dw printer on older macbook (running osx 10.5.8) and need an inbox driver as Brother drivers are only for 10.6 and newer. Any ideas?
Yes, I have the tethering plan. I was connected with USB and Bluetooth when I had the 3G.
I am can now connect with USB, I recieved a new not seen before window when I plugged in the phone with the Network window open that allowed me to click on apply an connect. -
Zoom option in accessibility enabled automatically and icon become so large. So not able to access (even call any no.) phone. Please fix this problem.
Update: I tried the "Toshiba Recovery Wizard" after everything else either fizzled out or hung up. After going all the way thru the recovery process (up to 100%), I finally got an error message.....it didn't work. And now, when I fire up the computer, I don't even get to that menu with the recovery options....the only thing I can boot into is the screens with the various ways to run your OS (in "safe mode", "safe mode with networking", etc).
I'm not a techie, but I'm guessing at this point, the part of my hard drive that got damaged in the fall was, at the very least, the partition with the recovery data. Couple that with the fact that this cheapo Toshiba laptop didn't even come with recovery disk (or ANY kind of disk, even basic installation software!), I'm screwed: I don't see any way to get a workable computer now without some kind of disk to boot from. So NOW my concern is more about spending the $$ for a new OS and THEN finding out the hard drive has other problems too...is broken in some other way to boot.
How to check this? As I said, I did run "chkdsk" back when I could get into the recovery menu and run the fix-it programs. It didn't note any problems. Thinking of taking this opportunity to upgrade to Windows 7 from Vista (which I never liked), but I have to know that the computer is otherwise ok....how to be sure? -
Hello,
I´ve a Problem with Muse.
Why are on the first web page buttons are shaped and following pages don´t? All Pages are based on the same Masterpage.
Any ideas?
StefanI just republished the site, and it looks fine, energievollfit | über
could you please try to republish the site again, and let me know . -
Using Pro Logic X to record. I have several tracks and I'm trying to record an audio track. I have the mic connect to Avalon 737 then into apollo interface. When I record all track are being recorded into that track. I can't just get the audio to record.
Thanks for responding. Everything seems to work right except for the when I plug into the 737. Ok let me see if I can be more clear. I had this set up done with two representatives of Neumann, and DBox. Here it is I hope this helps. 32 Channel snake (24 Inputs 8 outputs) Channels 1-8 from snake to my Octopre for Drums. From Octropre output quarter inch lines into the Apollo 2, quarter inch input. This is so that the Apollo 2 is taking the drum tracks. Snake Channel 9-12 into Apollo 1 channels 1-4 xlr. Snake Channel 13-16 into Apollo 2 Channels 1-4 xlr. Snake Channel 17 into the 737, output of 737 into Channel 5 of the Apollo 1 quarter inch.
Ok The Dbox. Sum output L&R into channel input 7&8 of Apollo 1. Apollo 1 output channels 1-8 into summing input channel 1-8 of Dbox. Apollo 1 main L&R going to main analog input L&R of Dbox. Spid out to DAW input of Dbox. I have both ADAT of both Apollos connected by optical wire. Also have port 2 of Apollo 1 into port 1 of Apollo 2 connected by Firewire. Let me know. Hope I got it right. Thanks for responding. -
Ipod Touch 16gb wont connect to my wifi anymore. Others can connect to mine and my Ipod can connect to all other locations except mine. It used to with no problem. I have restarted my Mac, my router and Ipod many times and nothing works. Help
My paper work for my linksys says WEP 64 bits. I've tried changing my IPOD to that and it will say put in password and when I do I get "invalid password" or can not connect. This has been in the last few weeks. I have researched this for the last 2 weeks, called apple and they said it's not my IPOD, called Linksys and they want to charge $30 to fix it. How do I change my router without totaly not messing it up?
-
I just got a new iPad air and also own an iPhone 5. I'm receiving most of my text messages on the iPhone, but some are now also showing up on my iPad. I don't want them on my iPad, any suggestions on how to get them to stop showing up n my iPad?
Go to settings>messages>send and receive at>you can be reached by iMessages at> Uncheck your phone number and you can select your Apple ID emal address if you want to use that for messages.
-
My boyfriend knew my apple id and my password and when we broke up he changed it and he changed my alternate e-mail address so i cannot restore it. The problem is that my iPhone activation is linked to iCloud. What can i do? I have old password and old alternate e-mail.
Take it and its purchase receipt to a physical Apple Store and/or click here and contact Apple's Account Security team.
(124839)
Maybe you are looking for
-
Downpayment request-Payment terms
Hi Gurus, We need to activate payment terms while posting Downpayment request, i tried to activate in the field status and posting key. it will not work out. Our business need to assign payment terms, while posting downpayment request. Highly apprici
-
Cannot upgrade Exchange 2010 SP1 Management Tools to SP2 on Win 8.1 workstation
I have a Win 8.1 workstation that I am trying to update the Exchange Management tools on from 2010 SP1 to SP2. I get an error that says: Error: The following error was generated when "$error.Clear(); &RoleBinPath\ServiceControl.ps1 Enab
-
Itunes device list does not show when i plug my iphone in to computer to backup
there is no 'device list' listed in itunes when i plug my iphone in to backup on itunes. how do i make 'device list' show up. thx deb
-
My company is splitting in two, so we're migrating half of our systems and servers to a new domain. I have an application that uses AppFabric. We have 3 Windows servers running AppFabric, each talking to a SQL server for the AppFabric cluster service
-
Hi, OS:- Windows 7 Bi Publisher :- 11.1.1.5 Microsoft Office Version:- 2010 I had downloaded the template builder for word from the home page of the BI Publisher. I installed the template builder for word by running as administrator. After the instal