I am not able to register a new ap in WLC

The issue is i am not able to add new APs on WLC. Currently, there are 48 APs registered. But it does not allow 49th AP.
i tried a new ap to configure and add in the network but it is not registring but when i remove any other ap from the network the newer which i was trying it will registerd.
So please help me regarding this issue

I tried to make a new ap-manager interface it is not working
i also tried to enable LAG it will show following message.
Enabling LAG will map your current interface settings to LAG interface. All dynamic AP manager interfaces and untagged interfaces will be deleted. All WLANs will be disabled and mapped to Mgmt interface.!!! You MUST reboot the system after updating the LAG config. After Applying the LAG config, yo u would still need to reboot the system and reconfigure LAG to revert back !!! Please press ok to continue.
Right now i have configured 2 interface one is managment and other is ap manager interface where is managment interface ip is .2 and ap manager ip is .3
and all my 48 aps are using controller ip is .3 so when i am enabling LAG the upper statment is saying it will deleted my all interfaces and mapped to managment interface so in this senario my all aps lost the connection.
so can you please tell me will i go through or any other option is there for register ap to WlC
because it is not going beyond the limit of 48.

Similar Messages

  • I've just updated my iPad to iOS 7.02 and I'm not able now to download new apps nor update the version of the existing ones.

    Hi!
    I've just updated my iPad to iOS 7.02 and I'm not able now to download new apps nor update the version of the existing ones. All of them are "waiting"... for ever.Even, when trying to download a new app, a "dratf" icon appears on the ipad, not the app's own icon...
    I've tried to switch off and on the iPad, disconnect and reconnect the itunes id... and nothing works. Even deleting an app, to download it again, doesn't work. It even doesn't ask for my password!!! (Stays with the small square with a circle around, the one that gets "bolder" while downloading... but it doesn't get bolder now. Just stay...).
    Any suggestions? I wouldn't like to reset the iPad, since I've got data in some apps that I wouldn't like lo loose...
    By the way, I can not either delete some apps with thos "draft" icons... even when the alert that appears when trying to do that is shown and select "ok".
    Thank you in advance!
    Best Regards,
    Carlos.

    Hi,
    Thank you, Once_was_lost, but it doesn't work either. I tried it yesterday as an option (I think you're referring to the options of those apps in the settings app).
    The problems are still here... I've been able to update some apps using the PC itunes (connecting the app to it), but all the other apps are still "wating", and I have two new strange things:
    * I cannnot remove the apps that are downloading (at least those that are supposed to be downolading ) . But I could remove one from the PC... and now there is an "empty line" in the "to update apps list".
    * Stranger: though I cannot download new apps or music from the store, I can do in-app purchases!!! In that case, I'm asked for the password and the item downloads. How is it possible?????
    I can download with the same user in the PC, in the iPhone... but not in the iPad .
    I'm getting mad...

  • I am not able to register my Apple ID for iCloud and the error is "the maximum no of free accounts have been activated on this phone" can any one help me why I need to do

    I am not able to register my Apple ID for iCloud and the error is "the maximum no of free accounts have been activated on this phone" can any one help me why I need to do

    Sir, your Apple ID can be used as an iCloud account as well. They are both the same thing.
    You can learn more from --> Set up your Apple ID for iCloud and iTunes - Apple Support

  • I am not able to create a new tab, eventhough i have tried all ways to do it.

    Normally the existing (current) tab has at the end an "+", and that gives you the option to make a new tab to the right. My Firefox tab does not have the "+", and I'm not able to create a new tab for another link. The new tab option is not working on my Mozilla internet browser.

    Use Hotkey CTRL + T to Open a Blank Tab. Do the following too:
    go to Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. You can enable the Add-ons later. Check and tell if its working.

  • I've just updated my iphone to the version 5.0 (9A334), I'm not able to create a new event in the calender, it shows "no calender"

    I've just updated my iphone to the version 5.0 (9A334), I'm not able to create a new event in the calender, it shows "no calender"

    Here you are "the strange draft logos"...

  • Not able to create a new action

    I am using Photoshop  CS5 Extended Version - Student and Teacher Edition.   I am not able to create a new action.  When I open up the actions menu, the new action option is greyed out. 
    Also, there is no  "new action" icon at the bottom of my action screen like I've seen in tutorials showing how to create a new action (screen shot from a tutorial). 
    How can I get these buttons so I am able to create a new action.  I've already uninstalled photoshop and reinstalled it but have gotten the same screen menus for actions.  I've also reset the photoshop essentials settings menu but that did not help either.  What do I need to do next?
    Thanks,
    Xemena

    .... will it work if you take it off button mode?

  • Garageband was not able to install the new sounds

    I'm on an iMac 21.5-inch (mid 2011) running Yosemite; 2.5 GHz Intel Core i5; 4GB memory.
    A few months ago, I uninstalled GarageBand. Now I'm trying to reinstall it. I can get GarageBand 6 reinstalled, but I would like to get working with the latest version. I'm able to download the latest version from the App Store with no issue. It installs with no issue.
    When I open it, it thanks for me downloading it, and then begins to download "an essential collection of sounds and loops." After a bit of downloading, it asks for my admin password; I enter it, and a few seconds later, it gives the error: "GarageBand was not able to install the new sounds. Close and re-open GarageBand to download and install them again." Closing and reopening GarageBand just takes me through the same loop (no pun intended). When the window is open, if I click on the GarageBand menu in the Apple bar, nothing happens.
    It does not ask me to accept anything; I am signed into the App Store with the same Apple ID I have always used (it is the only one I have ever had, so that's not the issue). I am an admin on my Mac, so it's not a permissions issue. It's not a password issue either.
    Things I have tried:
    Rebooting into Safe Boot and opening from there; same issue.
    Repaired permissions (it fixed oodles of things completely unrelated to GarageBand); same issue.
    Creating a new admin profile and opening from there; it gives a different error, but the effect is the same.
    Removed the program, trashed anything remotely related to GarageBand (preferences, folders, etc), emptied the trash, restarted the computer, reinstalled; same issue.
    Installed GarageBand on top of itself, just in case; same issue.
    I can't think of what else to try. Help!
    For reference, here is a screenshot of what I'm getting stuck on:

    The solution Lijoesat posted above worked for me!
    First I found the private/var/folders/ (and then lots of gibberish folders) and singled out two garageband files and deleted them. This did not work.
    I then deleted everything which may or may not be a good thing, I am an idiot, I have no idea if these are extremely important files or not!
    I tried to empty the trash bin after but many files was locked and Garageband would still not install.
    I did a restart of the computer, emptied the bin successfully and tried to install Garageband again and it worked fine!
    The inserted picture show some of the folder structure, I deleted everything after private/var/folders/

  • In the latest version of Firefox, I am not able to open a new tab neither by Ctrl+T nor from the File Tab nor by pressing the '+' sign next to the last tab

    In the latest version of Firefox, I am not able to open a new tab neither by Ctrl+T nor from the File Tab nor by pressing the '+' sign next to the last tab. So the only solution is opening "New window" which is extremely messy. Kindly help me with this issue.

    hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • I am not able to select a new network printer just installed at work to print to from Firefox. I have tried to reset the printer settings, but this did not work. Do I need to map Firefox to this new printer?

    We recently had a new printer installed at work that has been set as the Default printer on my computer. When I go to print something from Firefox, I am not able to select the new printer from the printer window in the print box. The new printer does not show up

    From another computer, go to http://www.mozilla.com/firefox/, click "Free download" button, click "Save File" button, select your flash drive in "Save as" window. "Firefox Setup 3.6.13.exe" file will be saved in your flash drive.
    You just need to insert it in your new computer and double-click on "Firefox Setup 3.6.13.exe" from Windows Explorer and follow instructions.

  • Cannot get all the sounds in library to download. I get this message GarageBand was not able to install the new sounds. Close and re-open GarageBand to download and install them again.

    When I attempt to download all the sounds in my Garage Band library, I get this message.
    "GarageBand was not able to install the new sounds. Close and re-open GarageBand to download and install them again". When I do this, I get the same message again.
    CAn anyone advise how to get all the sounds in my Garageband library?

    the same here for the drummers sounds in garageband 10xxx

  • I exported a pages document to word, but was not able to edit the new word document.

    i exported a pages document to word, but was not able to edit the new word document.

    I have a OSX IMAC Version 10.8.5.  I got pages at the same time I purchased this computer.  I use a document to write all my passwords. Seems like when I E-mail myself the document from pages, I have not been able to type in the document, it acts like it is locked. I checked all the "lock" and "unlock" fields, and none of them were locked.  I notice the document says PDF.  How do I correct this?  Seems like I've tried everything.  If you can help, that would be great!

  • Planning Appl not able to register and unregister with shared services

    Hi All,
    I created a planning application before that I created a datasource. After crearting an application I got an error as Application  not able to register with shared services .
    And also I am facing one more issue that is if I delete any particular planning application at that time I got an error as Application  not able to unregister with shared services.
    I am able to open the planning application through http://<planningmachine>:8300/HyperionPlanning/AppWizard.jsp and its working fine. I am able to open the Shared Services though Workspace but I am not able to find the option for planning application.
    Kindly guide me how to overcome it.
    Thanks and Regards
    ChiDam

    Have you checked the logs? Found something?
    This normally happens when there is issue with Planning app and cluster mapping. For some reason, the application maps to non-existent cluster in Planning system schema resulting in failure of HSS registration. you can manually re associate the cluster using configuration tool and try registering again.
    Cheers..!!

  • I am not able to download any new music to my ipod touch. It has all the updates.

    I am not able to download any new music to my ipod touch.  It has all the new updates.  When I connect my ipod to the computer, the new music does not download. I need some help please!

    Is your music from Itunes? If it's not that's probably why

  • HT202873 I just purchased GB10 last week and I repeatedly keep getting the following message, "Garageband was not able to install the new sounds. Close and re-open Garageband to download and install them again."  I have tried EVERY suggestion!

      Model Name: MacBook Pro
      OS X Yosemite: 10.10.2
      Model Identifier: MacBookPro8,2
      Processor Name: Intel Core i7
      Processor Speed: 2.3 GHz
      Number of Processors: 1
      Total Number of Cores: 4
      L2 Cache (per Core): 256 KB
      L3 Cache: 8 MB
      Memory: 4 GB
    I just purchased GarageBand 10.0.3 last week and I repeatedly keep getting the following message when I try to download ANY of the FREE Piano lessons in the "Lesson Store", "Garageband was not able to install the new sounds. Close and re-open Garageband to download and install them again."  I have tried EVERY suggestion that I have come across on the internet and nothing is working!  If I'd known I would encounter this issue, I would not have paid for this.  Tried restarting, rebooting, reinstalling, deleting the cache, and on the verge of just reinstalling the OS.  I have come across people have the same issue for months and I can't believe Apple has not offered a fix or update or anything. 

    Immargarita,  Since you just purchased the software you qualify for a no charge one on one at an Apple store.  They never could tell me what was wrong, but after three visits and not one dime, all lessons downloaded at the store.  I was not going home until it worked.
    Hint, hint, I had just upgraded OX when the problem started.   So... I qualified for tech support.  I forgot to get my none working since the up grade Photoshop fixed.  Some Java component can't be found and just like GB, the link to Apple for support does not work.  I have the good old PS disc.  I'm not happy with this cloud stuff.
    When you call and give the SN for your computer, they may say it will cost $29.00 dollars for one time support.  Instead choose a different prompt, tell the human being what your problem is and set up a visit to the Apple store.   BTW, no one at the store seemed to have heard of this issue.
    The techie just started the download and ran the activity monitor.  The download stopped once.  Then he continued it and everything is there now.
    Shame on you Apple.
    Hope this helps.

  • I am not able to see the new drive

    I have a Sun Blade 2500 with SUN 5.9 OS installed.I have on hard disk drive in it and now i attached another drive in this system but i am not able to see the new drive when i run the below command
    bash-2.05# echo | format
    Searching for disks...done
    AVAILABLE DISK SELECTIONS:
    0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
    /pci@1d,700000/scsi@4/sd@0,0
    Specify disk (enter its number): Specify disk (enter its number):
    ==============================================
    Although i can see two drives in the output of below command:
    bash-2.05# iostat -E |grep Size
    Size: 73.40GB <73400057856 bytes>
    Size: 73.40GB <73400057856 bytes>
    Size: 0.00GB <0 bytes>
    Edited by: 842294 on Apr 6, 2011 4:40 AM

    Resolved
    bash-2.05# cfgadm -c configure c0
    bash-2.05# echo | format
    Searching for disks...done
    AVAILABLE DISK SELECTIONS:
    0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
    /pci@1d,700000/scsi@4/sd@0,0
    1. c0t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
    /pci@1d,700000/scsi@4/sd@1,0
    Specify disk (enter its number): Specify disk (enter its number):

Maybe you are looking for

  • Rman oracle 8i and tsm solaris 8

    HI all, i have a sun solaris machine with oracle 8i an tsm test software. I have made a policy for three different incremental backup 0/start month 1/sunday 2/every day. Then a i have made a script that check the obsolete backup with report obsolete

  • Installing AIR application gives blue screen of death

    I tried installing an Adobe AIR application called HelloWorld.air from a book entitled "Adobe Flex 3 Training from the Source", and I would get the Windows' blue screen of death. I've seen others post about this, so I know I am not alone. My operatin

  • Flash Player 10.0.45.2 - Youtube Video playback

    Hi guys, My computer automatically downloaded the new 10.0.45.2 version of Adobe Flash Player sometime last night and now I am unable to play videos on the internet for longer than a couple of seconds - (At most about 90 seconds), I've tried removing

  • W540 with an external GPU, would it be possible?

    Hi everyone, I was wondering if it would be possible to connect an external GPU trough the Express card adapter on my W540.I would use this devicehttp://www.banggood.com/EXP-GDC-Laptop-External-PCI-E-Graphics-Card-p-934367.htmlWith an AMD Radeon r9 2

  • Clips not rendering

    Can anyone tell me why my edited clips are not rendering? I've never had this problem before... Left iMovie up all night, and they're still not done (or even started).