I am not able to save changes of gadgets in my Blogger blog
When I am in the edit layout of my blog:
http://www.blogger.com/rearrange?blogID=5691124119466167227
and I move a gadget up or down and then hit the 'save' button, the save gets locked up and I have to exit and the change is not saved.
I see in the lower left hand corner a javascript:void(0) message, which I assume is an error message pop up. I am hoping this might be enough information to tell you what could be causing the javascript message and if it is the reason my attempts to save changes on my blog are unsuccessful.
I have Windows XP and use a desk top Dell Inspiron 530 computer. Thank you very much. I appreciate your help.
I have already submitted this question to "Blogger", but they haven't replied.
You don't have a copy of it on your backup of your downloads and you've checked your computer's hard drive for it ? What you can re-download will show under the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes. If other films show there but not that one and it's still in your country's iTunes store then check to see if it's hidden : http://support.apple.com/kb/HT4919
If it's not hidden and it's still in your country's store then you can try contacting iTunes Support and see if they wil grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
Similar Messages
-
Not able to SAVE changes in Graphical Screen Editor
Hi All,
I am not able to SAVE the changes which i do in SE51 using the Graphical Screen Editor.
I get the below message:
"EU_SCRP_WIN32 :connection to ctxprdcgy016.pcacorp.net"
If i use my ID on my colleagues system I am able to SAVE the changes without any error.
I am using Citrix Client to connect to remote server.
PLease if anyone has any solutionHi
If the connectivity speed is too slow, then you will get this error. Since you are Citrix connectivity, you will log on to client network using remote log on. This will make your connectivity slow.
There is a note for this problem and note no is Note 133903 - Upgrade of graphical Screen Painter.
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=133903
Please go through below threads
Screen painter error: EU_SCRP_WN32 : timeout during allocate / CPIC-CALL
Error EU_SCRP_WN32 Time out
Shiva -
Not able to save changes in VB Project properties under debugging.
I am unable to save Run64BitRuntime property=FALSE for my SSIS VB Project under debugging. I change it, rebuild, save and reopen. Then I check the change I made and it shows reverted to TRUE. What is causing this
ITProTekHi ITProTek,
As far as I know, it is by design.
The Run64BitRuntime project property applies only at design time, for the SSIS packages that really don't make use of the 64-bit processor, the SSIS project property
Run64BitRuntime can be set to False.
Reference:
https://social.msdn.microsoft.com/Forums/en-US/e91d6b6e-207e-4370-84dd-00016de602ab/setting-run64bitruntime-debugging-property-to-false-is-not-deploying?forum=sqlintegrationservices
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/63323b27-0c08-4d8d-bff3-b67a3d5296dc/ssis-2012-run64bitruntime-defaults-to-true?forum=sqlintegrationservices
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Not able to get changed values in the SAVE EVENT in ServHPartnerDet view
Hi Experts,
I am new CRM WEB IC, i have requirement like need to access four IBASE fields from BupaIbaseDetail and need to display those fiedls in ServHPartnerDet view. I am able display the fields and its values in the target view. But when user press change button and changes those four fields and press save button not able get the changed values in to the SAVE EVENT.Anyone please help me in this.
IBHEADER , IBASEADDRESS are the CONTEXT NODE CREATED in target view. I have binded IBHEADER to CuCoIbase custom controller and getting four fields data from IBASEADDRESS. below is the code for CREATE_CONTEXT_NODES.
METHOD create_ibaseaddress.
DATA:
model TYPE REF TO if_bsp_model,
coll_wrapper TYPE REF TO cl_bsp_wd_collection_wrapper,
entity TYPE REF TO cl_crm_bol_entity, "#EC *
entity_col TYPE REF TO if_bol_entity_col. "#EC *
model = owner->create_model(
class_name = 'ZL_CRM_IC_SERVHPDET_CN00'
model_id = 'IBaseAddress' ). "#EC NOTEXT
ibaseaddress ?= model.
CLEAR model.
coll_wrapper =
ibheader->get_collection_wrapper( ).
TRY.
entity ?= coll_wrapper->get_current( ).
CATCH cx_sy_move_cast_error.
ENDTRY.
IF entity IS BOUND.
TRY.
entity_col = entity->get_related_entities(
iv_relation_name = 'FirstLevelComponent' ).
CATCH cx_crm_genil_model_error.
ENDTRY.
TRY.
entity ?= entity_col->get_current( ).
CATCH cx_sy_move_cast_error.
ENDTRY.
CLEAR entity_col.
IF entity IS BOUND.
TRY.
entity_col = entity->get_related_entities(
iv_relation_name = 'ComponentAddress' ).
ibaseaddress->set_collection( entity_col ).
CATCH cx_crm_genil_model_error.
ENDTRY.
ENDIF.
ENDIF.
ENDMETHOD.Code i have written in the CREATE_CONTEXT_NODE method for my custom context nodes( IBHEADER,IBASEADDRESS).
this CREATE_IBHEADER some data related to IBASE header then from this reading the IBASEADDRESS contextnode fields for displaying in the ServHPartnerDet. It is working fine but After changing the four fields values in the ServHPartnerDet view and trying to save, then context is not reading the new values it gives the old values only.
TRY.
lr_coll_wr = ztyped_context->ibaseaddress->get_collection_wrapper( ).
IF lr_coll_wr IS BOUND.
lr_entity ?= lr_coll_wr->get_current( ).
ENDIF.
CATCH cx_crm_genil_model_error.
ENDTRY.
CALL METHOD lr_entity->if_bol_bo_property_access~get_property_as_value
EXPORTING
iv_attr_name = 'BUILDING'
IMPORTING
ev_result = lw_building.
the building has got result of old value no the new value.
method CREATE_IBHEADER.
DATA:
model TYPE REF TO if_bsp_model,
coll_wrapper TYPE REF TO cl_bsp_wd_collection_wrapper,
entity TYPE REF TO cl_crm_bol_entity, "#EC *
entity_col TYPE REF TO if_bol_entity_col. "#EC *
model = owner->create_model(
class_name = 'ZL_CRM_IC_SERVHPDET_CN01'
model_id = 'IBHEADER' ). "#EC NOTEXT
IBHEADER ?= model.
CLEAR model.
bind to custom controller
DATA:
cuco TYPE REF TO cl_crm_ic_cucoibase_impl,
cnode TYPE REF TO cl_bsp_wd_context_node.
cuco ?= owner->get_custom_controller(
'CuCoIbase' ). "#EC NOTEXT
cnode ?=
cuco->typed_context->ibaseheader.
coll_wrapper = cnode->get_collection_wrapper( ).
ibheader->set_collection_wrapper( coll_wrapper ).
endmethod. -
Not able to save file changes on HCP Web IDE
Hi
i am not able to save the file changes on my HANA XS Application created on HCP Trail Account using Wed IDE. This problem does not occur always but now it has become frequent. On click of save button waiting icon comes up and then after minutes it shows error message as Error while Saving.
I normally use HCP Web IDE platform for all development work.
My Account ID : i314165trial
Can anybuddy tell me what is the issue as this is will hamper the development process.Check the permissons on the folder and drive, not just on the file.
-
Have a trial version, am not able to save a document after I've made changes. Why is that?
Hi,
if you use Adobe Reader to view your PDFs you cannot save any changes by default.
To do this you need at least Adobe Acrobat to add additional Rights (aka Usage Rights aka Reader Extensions) to your PDF. -
Not able to save more than 2000 characters
Databse - SQL server 2000
I am using jdbc to save some text in sql server 2000 database. column is of type ntext.
If text is more than 2000 character, i am getting an error.
I tried changing the connection setting to sendstringparameterasunicode=false. After setting this property i am able to save more than 2000 characters, but i am not able to save some special characters. eg - . I am not able to save “abc” but i can save "abc". So it is not recongnizing the double quotes in the first scenario.
Amit
Edited by: rushtoamit on Feb 22, 2010 8:48 AMNo idea. But it isn't a java nor jdbc (general problem.)
Thus if you are seeing something that tells you it is too big it either comes from the driver or the database.
So your solutions are
1. Use a different database and driver
2. Use a different driver
3. Modify your code -
CS5 not able to save workspaces or edit preferences
Hey guys,
After installing CS5 yesterday I quickly found out that in all of the programs I am not able to save my work space or edit preferences. Basically what happens is I will say "save workspace" and a blank box pops up which says save workspace, but then that is it... its basically frozen because I can not get past this prompt.
Now when I try to change my preferences on the clipboard to take off PDF preferences, I see a square that minimizes quickly to the bottom right of the program and then the program is left frozen, (nothing can be clicked on) and the only way to exit is to end the process.
According to some other people this may be caused due to a flaw in the installer which makes it so I do not have access to read // write preferences. There seemed to be a solution for some mac users by changing system files so that anyone can update them. But I can not seem to find the same files they are editing on my windows 7.
Can some one please try to help me out.
Thank you so much
MDo you have any custom display setting such as large fonts or resolution? If so, set them back to Windows defaults.
Bob -
Not able to save data in pa30 action infotype in production
Hi,
In my organization users are not able to save data in SAP HR pa30 action info type in production.
It is gets hanged and throws run time error after run long time .
in ST22 it will give below error:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Information on where terminated
Termination occurred in the ABAP program "SAPLRHAS" in "FILL_STRU_TURBO"
The main program was "MP000000 ".
In the source code you have the terminated point in line 759
of the (Include) program "LRHASF00".
Thanks and regards,
TarunHi,
Pls check your relationship of reporting postions and set up relationship A002 and also check organization relationship
otherwise take help form ABPERs and debug and partiuclar prorgram and where and witch object its throwing
error found out.
Regrads,
Tarun -
Hi All,
I'm new to ADF and trying to learn it.
I'm using JDev version 11.1.1.6.0.
My use case is mention below :
1. I've created 2 Bounded task flows and calling one task flow from another task flow using task flow call activity.
2. In child task flow, i've created view activities with Train component. View activities have text fields, radios buttons, tables etc which can be filled by user.
3. I want to save the page data to payload if I move to next view activity using Next button or by train bar.
To accomplish this scenario, I'm calling a customized actionListener on click of Next button/Train Stop Bar in which I'm using below mention code :
BindingContext bindingContext = BindingContext.getCurrent();
BindingContainer bindings = bindingContext.getCurrentBindingsEntry();
OperationBinding obj = bindings.getOperationBinding("update");
if(obj != null){
obj.execute();
if(!obj.getErrors().isEmpty()){
System.out.println("Not able to save data......");
else{
System.out.println("able to save data......");
But I'm not able to save page data to payload/bindings. If i close the window using browser close button and move back to previous train stop in which i've filled the data, the data get lost and all the text fields/Radio button become empty.
If I use Save button provided by Oracle BPM, then I'm able to save it. and data reflected even after if i close the window using browser close button.
So I also try to use the below acode but did not get any success :
FacesContext fctx = FacesContext.getCurrentInstance();
Application app = fctx.getApplication();
ELContext elContext = FacesContext.getCurrentInstance().getELContext();
InvokeActionBean invokeActionBean = (InvokeActionBean)app.getELResolver().getValue(elContext, null, "invokeActionBean");
invokeActionBean.setAction(actionEvent);
invokeActionBean.action();
Can somebody please let me know, what am I doing wrong here or if I'm missing anything.
Any pointers/suggestions for its resolution are welcome.
Thanks in advance.Hi Timo,
Yes, it is the same binding which is called from BPM Save button.
I did not use the debugger but i tried to print the OperationBinding object which was showing me proper binding for update.
Even when i tried to print the return value of invokeActionBean.action(); method, it print the proper string "closeTaskFlow".
So if I see it logically, then I'm just trying to call the methods of InvokeActionBean from my customized method.
If methods of InvokeActionBean not being accessed, or if it was not getting called, then it should not print the "closeTaskFlow" as return value.
I only want to save page data into bindings once I'll move away from page precisely on moving next.
If there is any other work around for this issue, please let me know.
I've also tried to use Explicit/Implicit save points provided by ADF but that did not work too. -
Not able to save a newly created Data Model in BI Publisher.
Hello everyone,
I was trying to create a new Report (my very first report) in BI Publisher. I created a new Data Model and a Data Set. But I am not able to save the Data Model and thus not able to proceed to the report. There's no error shown. Same happens with reports too.
Kindly provide me with a solution.
Regards
Ash
Edited by: 902739 on 28-Dec-2011 01:02You should have a group called 'XMLP_ADMIN' in your repository and administrator or the user you are using should be part of that group. Look into paint.rpd for all these.
-
Not able to save report output in a text file and RTF file
I am using Oracle Developer6.0 . I am facing problem with reports. I am invoking reports from form using run_product.
1. I could not able to save the report in text file . Whenever i try to save the report output in a text file.It gives dump and application get closed.
2. In RTF format , it execute the query which i have given at the design time while creating a report . But while running i am passing query either through lexical parameter or passing value of where criteria user parameters. It display the output for the specified value. But when i save this report output in rtf file . It execute design time query and save that in a rtf file.
If any body is having any idea about it . Please let me ASAP . It is very urgent for me.
Thanks in advanceTry the following:
Do not generate the report to .rep file, but rename/copy the .rdf file to .rep file and execute it. -
I bought a omega 320GB external hard drive so a friend could save the files off an old windows laptop i had but now when i try and open the files on my mac, it doesn't let me. i'm also not able to save any file on to this hard drive either! can some one please help me?
The drive has the NTFS format, which the Mac OS can read but can't write to. Copy the files from the external drive onto your Mac, then reformat the external drive using Disk Utility, creating a Mac OS Extended volume and using the GUID partition scheme. Then you'll be able to write to the drive. Note that reformatting erases everything from the drive, so don't do it until after you've saved the drive's contents to other media.
-
Not able to save keyfigure structure
Hi All,
Iam not able to save keyfigure structure which is used in specific query only and Iam able to save characteristic structure.
Regards
SHello,
firstly run a check in the query designer to check for syntactical errors.
make sure that you are having only 2 structures in the query.System will not allow to define third structure.
In the keyfigure structure,see if you have defined your selections and formulas correctly.
If you have cell definitin, do check for correctness of the same.
Please provide the exact error message you are getting when you are saving.
Regards,
Dhanya. -
Not able to save any projects to PWA server from MSPS client
HI,
We are not able to save any project to PWA server using MSPS client. It says saving (0%). But not getting processed to pwa.
Thanks!
ShamsuddeenHi Shamsuddeen,
Have you correctly configure in MSProject the connection to Project Server?
See reference below:
http://office.microsoft.com/en-us/project-help/connect-log-on-to-project-server-HA010373238.aspx
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS
Maybe you are looking for
-
Upgrading Mac Pro boot drive?
I've got a Mac pro, 8 core, fast, etc. But it has a 300 GB HD which I've done a pretty good job of filling up. Right now, no problems, but I only have 48 GB free on that drive. I also have a one TB data drive (I'm a photographer, lots of RAW images o
-
A bug in /etc/rc.d/functions; and the release policy
This is a small issue, but how it relates to Arch's release policy is important. I have CONSOLE="ter-120b" in my rc.conf, and I got following screen on startup. The message about console font is overwritten by the next message. Additionally, the righ
-
Hi Guys, I have generated the webservice from the ID and saved the file as wsdl. where can i find the url for this webservice which i can use to send the request from webdynpro application Thanks, srini
-
MacBook Pro responding slowly, beachball, Console errors
Hi everyone. My friend has asked me to look at his MacBook Pro; he's been having troubles with various applications and the machine responding slowly in general. Machine's specs: 15" MacBook Pro (Model 4,1); 2.4 GHz Core2Duo, 4 GB RAM, OS X 10.6.3 Sy
-
Itunes can't find any burning software
when wishing too burn itunes library to disc, itunes fails to find any burining software on pc. Yet i can still burn music in windows media player without failure. HELP!