I am not able to save the pdf with filled data or related to reader extension
Hi,
I have designed a pdf with some text field controls. But i am not able to save the document when i fill some data into the pdf.
or whenever i save data it says that the pdf will be saved blank.
I know that this is the reader extension issue. How to i add this reader extension feature into it.
I know that reader extension can be
1. cached
2. A document can be made reader extended using adobe live cycle process.
3. also it can be embedded while designing the pdf.
Can any body let me know how do i incorporate reader extension feature while designing and at runtime too.
I know we have taken reader extension license but dont know how to use this reader extension feature.
Regards
Sunil
Hi Sunil,
You indicate that you have a Reader Extensions license, did you also purchase Adobe LiveCycle Reader Extensions ES2? You would apply the license to your form using this server product.
You can also apply reader rights using Acrobat Standard v9 (or Acrobat Professional v8), but this has license restrictions - see EULA. Also the rights that are enabled using this route will not be as many when compared to LC Reader Extensions ES2.
I have a summary here:
http://assurehsc.ie/blog/index.php/2010/05/using-livecycle-forms-in-acrobat-and-reader/
Also have a look at the Adobe page:
http://www.adobe.com/products/livecycle/readerextensions/
Maybe talk to the Adobe sales in your region.
Good luck,
Niall
Similar Messages
-
I am not able to open the pdf attachments that someone sent me it comes up with a gray box saying adobe cannot open?
Make sure the pdf has the '.pdf' extension on the file name. I've seen this a few times and adding the extension usually solves the problem.
-
OLAP Variable in DTP - Not able to save the selection
Hi Guru's
We are on BI 7.0 and supportpack 13. I am facing an issue with the OLAP variable in DTP filter . I am not able to save the selection/filter within DTP via OLAP variable. I am able to test the values of the OLAP variable within DTP screen (just like in infopackage) , but when i save it, it does not appear in the selection.
Have any of u faced this issue? I searched for SAP notes , but could not find any matching this issue. Could u please help?
Thanks & regardsHi Voodi,
Thanks for ur response. But i have checked that too. I am not saying that the value need to appear in selections screen. The filter in DTP is not showing a check tick mark and also no variable is found even though i had saved it and activated the DTP.
I also checked running thisDTP and checked the selections in the header of the monitor. No selection is shown there.
Thanks -
Not able to import the article with sidecar.xml
Hi,
With the new DPS version (ver. 18), we are not able to import the article with sidecar.xml. Could you please check and suggest the solution for the same.
With Regards,
Anil YadavI read that your sidecar needs the author-value to be working.
—Johannes
(mobil gesendet)
Am 30.01.2012 07:54 schrieb "Anil Yadav" <[email protected]>:
not able to import the article with sidecar.xml created by Anil Yadav<http://forums.adobe.com/people/Anil+Yadav>in
Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4173103#4173103> -
I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ? I have also restored it but not getting
I have an iPhone 4 also. If you are referring to the flyover view, its unavailble for the iPhone4. If you want to rotate the map, hold two fingers on the map for 2-3 seconds and rotate them in opposite directions.
Hope this helps -
I am not able to save formscentral as PDF, and i dont have trail version. It shows me it beeing prepared but than nothing happens. thanks for help
Can you share the form with me ([email protected]) as a co-author?
Instruction on how to share can be found here: http://forums.adobe.com/docs/DOC-2462
Are you on a mac or windows machine? What browser are you using?
Gen -
End users are not able to save interactive pdf form created with designer
I am new to using LiveCycle Designer and have created a pdf form but my end users are not able to save edited form. Does this have something to do with whether the form is static or dynamic. If so, I am not exactly sure how to use the restorestate option to convert it back to static. I also tried to enable the "user rights access in adobe reader" under the advance menu and had no luck.
My end users have acrobat reader 9 - do I need them to download anything else, maybe professional.Thanks Paul for your reponse
In my Adobe Pro I don't see the option Reader Extend rather I enabled "Enabled Usage Rights in Adobe Reader" amd I figured this was somewhat the same. So if I enabled this option in Adobe Pro already and they are still not able to edit the fillable text slots or save it what other option do I have in figuring this out. -
Not able to see the history period and data
Hello
I have 2 time planning bucket periods - history of 24 months and future 14 months.
have assigned both in the data view.
i have loaded the data from infocube to planning area and i got the successful message.
during the transfer i have used the key figure assignment feature and used my key figure which is zhistory.
i have not used 9AVHISTORY.
my issue is i am not able to see the history periods and hence not able to see the data in history.Hi
The data get loaded and its also available in the planning area, as you defined the time bucket profile according it i.e.24 month in past and 14 month in future. Its only while definition of data view you have not defined these flags you were unable to view this data.
Hence as I mentioned data has correctly loaded in the planning area just not getting viewed.
I hope this answers your question.
Thanks
Amol -
I recently bought a used macbook (2008) and was told that it was set back to factory settings and came with all the orignal software, box etc. The first Installer disk of the Mac os X was already in the disc drive, but I'm not able to get past where it saves the installer. It wasn't able to find anywhere to save it. I have no clue what to do. Any suggestions? Thanks for your help!
Snow Leopard disc must look like this to run on a 2008 MacBook:
and not say Update, Dropin, OEM, or any Mac model on it.
2008 MacBooks could at minimum also use the 10.5.6 retail disc that looked like:
And some of the earliest 2008 models can use 10.5.4 as well, but it couldn't say Upgrade, Dropin, or OEM or a Mac model on it, except MacBook, if it was the one bundled with that MacBook.
If the disc is stuck in the drive, use this tip to remove it:
https://discussions.apple.com/docs/DOC-1015 -
hi,
When i am trying to save the project, not able to do it.please help me to solve this issue.
I am getting following error.
preference.properties
(Acess denied)
Preference.properties (Access is denied)
java.io.FileNotFoundException: Preference.properties (Access is denied)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
at java.io.FileOutputStream.<init>(FileOutputStream.java:70)
at oracle.wh.service.sdk.OWBPreferences.saveToClientStorage(OWBPreferences.java:367)
at oracle.wh.ui.console.WorkBenchController.doRealcommit(WorkBenchController.java:1155)
at oracle.wh.ui.console.commands.CommitCmd.performAction(CommitCmd.java:24)
at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Thanks
dadivelaHi
Carsten Herbe is right you do not have read and write permission on the file.
either login by Administrator or ask Administator to give Read and write permission onthe same filePreference.properties
or
better to take Read and write permission on %OWB_HOME folder -
Can not able to save the data while executing the package/procedure
Hi,
I created one package and schedule this in JOB, job is running successfully but data is not inserting in table,
CREATE OR REPLACE package body LST_RPT as
procedure gender_proc(gender varchar2) is
begin
insert into gender_count
select * from mag_hotline_gender;
end;
end LST_RPT;
after that I am executing this
exec MSREUL.MKE_LST_RPT.gender_proc('M');
but it is not saving the data
can anybody suggest where I am doiing mistakeHi Arun,
Thanks for the suggestion.
I checked my table structure, gender_count was GTT(global temporary table), Now I changed the structure package is executing sucessfully and able to commit the data
exec MKE_LST_RPT.gender_proc('M');
commit;
can you plz help on another point I want to schedule this package on job means it runs on every day and commit automatically, I am using TOAD but unable to create job can you plz help on this issue. -
F-44 Vendor Clearing: Not able to save the reason code
Hello Experts,
We are testing t-code F-44. We are attempting to perform a vendor clearing with a Debit Balance Write-off. As part of the test we require to add a Reason Code to the transaction posting. Unfortunately, the reason code is not being saved to the FI transaction being generated.
I will be glad to provide further information if needed, also points will be rewarded as soon as suitable answer is received.
Thanks,Hello Experts,
We are testing t-code F-44. We are attempting to perform a vendor clearing with a Debit Balance Write-off. As part of the test we require to add a Reason Code to the transaction posting. Unfortunately, the reason code is not being saved to the FI transaction being generated.
I will be glad to provide further information if needed, also points will be rewarded as soon as suitable answer is received.
Thanks, -
Hi
I have created a form which has one field called Target user of type Lookup.
From the property tab, I have added a property to the field. Property name is Lookup Query and Property value is "one of the select query".
Now when I preview the form, I get the right result but when I am trying to make this version as active version, It gives me following error: "Required property have not been set for the field: Target USer".
I believe I have already assigned property to Target User field by adding Lookup Query to that.
Am I missing something? Or my approach itself is not correct?
Any help would be appreciated.
Thanking You
Kiran ThakkarLookups require the following properties:
Lookup Query - SQL query, select usr.usr_first_name, usr.usr_last_name, usr_login from usr usr where usr.usr_login not like 'XEL%'
Column Names - name of the column(s) like usr_login or lkv_decoded. If you display multiple, no spaces in your value, like usr_last_name,usr_first_name,usr_login
Column Captions - displayed field name, Last Name, First Name, Login
Column Widths - i just always use 100 - 100,100,100
Lookup Column Name - this is what is returned when the item is selected. usr_login
This lookup will return all users who are not the three default users in oim.
-Kevin -
Query Designer - Not able to "Save" the entered data
Hi Folks,
I've created a planning-enabled query in BI 7.0 Query designer. When I execute (in the web), it allows me to make manual entries. However, there's no standard "Save" button to save/update the values.
The cube is Real-Time and the query I built is on an aggregation level defined for this cube.
Any help will be appreciated,
Thanks
BarisHi,
you need to define your save button.
-> if you execute your query in the designer you can only display. To save your data you need to create a workbook in the analyser with your planquery in it and define a save button.
D -
Not able to see the records in master data
Hi friends
My requirement needs the data to be loaded from a RDM table.I created a data source in the R/3 and by using the extracto checker i am able to see the data.I created the info packages one for Attr and other Txt,replicated the datasource and loaded the data.I am able to see the data in the PSA and when i go into monitor in the infopackage it says the data has been loaded and it shows no errors.But I am not able to see this data in the master data info object.Can anyone please help me out???
MouliHi
Check out your infopackage setting: if its upto PSA or to MD table also
Open Master data table in SE11 and check the OBJVERS field wether the MD is activated or not!
Regards
GSK
Maybe you are looking for
-
Open value is not updating in credit workbench
Hi we are using crm 7 ehp2 system currently facing issue in our credit scenario which is integrated with ERP credit configuration. Open value is not updating in Credit Analyst Workbench(CRM_CAWB) and the same is not updating in erp t-code FD32 fiel
-
How do I make my own sounds and put them on a Midi controller?
I want to be able to make my own sounds and program then into my midi controller. Is this possible? If so How do I go about doing it?
-
Latest backup doesn't show up after iOS5 update
Last night I went though the progression to upgrade my iphone4 to iOS5: 1. Sync my iphone (running 4.3.3 I believe) in itunes (~version 10.3) while downloading itunes 10.5 in the background. No problems detected 2. Update itunes to 10.5. No problem
-
My earlier question re Firefox
I have not used this site before and its late in New Zealand.... i don't know the correct way to add to my earlier question about no admin rights to update F Fox. I have had a look at other replies on the site and found the reason, it is because "al
-
Can I use my old iphone as an ipod? if I hook it up to my itunes it won't let me install any music. It disconnects and phone goes to apple screen