I am not able to set up my ipad2 - tried the regular help but nothing seems to working. itune simply wont detect the ipad
i am not able to set up my ipad2 - tried the regular apple help - did all those routines - but nothing seems to working. itune simply wont detect the ipad
http://support.apple.com/kb/TS1538
Similar Messages
-
The wi-fi in my iphone 4S is 'greyed out' and i am not able to switch it on. I have tried resetting the network settings but nothing happened. I can't even download the new iOS7 version as it requires WI-FI to do so. Please help.
I had same problem. I removed the back cover, and warmed wi-fi module by hairdryer of my wife). five days wi-fi works great. I do not know what will happen next.
during operation iphone must be turned off. time of heating is near five minutes. wifi module is located upper the battery, on the upper right corner of device. -
Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest.
Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest.
-
I just restored my ipod and the power button works, as well as the home button but when I slide the unlock button it doesn't respond. Basically it is not sensing that I am touching it and I can not get out of the home screen. I've tried restoring it and restarting it but nothing seems to work. I've tried everything, is there anything I can do myself to fix it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My Iphone 3GS has just restored and I completed the things on the Iphone and then it says no sim card activated and I tried everything it said if it does not work, but nothing seems to work?
All iPhones require a SIM for activation.
Insert a SIM in the iPhone. -
I was downloading the new IOS and message could not find Iphone appears in Itunes window - Now my my phone is stuck with the power symbol and an arrow pointing to the Itunes symbol, I have tried turning off my phone and turning it back on but nothing seems to work
So when you plug it into your computer, you're not getting a message in iTunes that it has discovered a phone in recovery mode?
Reboot both the computer and the phone and try again. -
I recently moved back to the UK and bought my iphone 4 with me. It is unlocked and works on the new contract that I have set up here in the UK. The problem I'm having is that some of the UK numbers that I had already had on the iphone in Korea as international UK numbers will now not work as they are still coming up as international numbers. This means it is costing me a lot to message or call these numbers. I have tried changing the number format various ways, deleting the numbers (although it still seems to remember them), resetting the phone, restoring the phone.
How can I succesfully change these numbers?
Any UK numbers I have added since changing the contract are working fine.
Thanks!Do you happen to have Dial Assist on? This is in Settings>Phone. This is what helps the phone identify international numbers when dialing, based on location. See if turning that off/on makes a difference. Unless you are making a number of international calls, I believe this can be left off. See the User Guide http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf Page 49 has info regarding Dial Assist.
-
I have a brand new ipod shuffle and my computer and itunes does not "see " it when I plug it in.
I have tried most of the remedies listed but still cannot get it to work - what is wrong?
Please someone help?To all
I have managed to solve the problem with the help of the Apple Support.
I did not have a USB driver installed for the IPod. This is now fixed and is easy to do.
Hope other people can gain knowledge from my learning curve! -
Not sure what else that I can provide here. This particular software function does not seem to work.
In case you are using "Clear history when Firefox closes":
*do not clear Browsing History
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox profile folder.
*Help > Troubleshooting Information > Profile Directory: Show Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them).
*http://kb.mozillazine.org/Multiple_profile_files_created
If you use cleanup software like CCleaner then check the settings for the Firefox application. -
I'm using Logic 9 with a Macbook Pro. On one project I'm getting a message 'not enough processor power' and the computer stops playing
I've tried freezing all tracks but this has no effect. I've also bounced all soft synth tracks to audio, but to no avail. The computer stops playing
even at the start of the track where there is nothing but a kick drum happening.......Thank you for the suggestions.
I had previously tried all of the above but the airport/wireless thought. Unfortuneately, none of these things made a difference, including the wireless suggestion.
Currently, I am using my Mac's "cheapo" internal audio hardware (haha). I have a one year old 27-inch iMac, a good pair of bose speakers, and a polk sub. I don't believe it is an issue with my setup, considering I completely disconnected and unplugged it.
I did, however, do a little info hunting on the internal audio situation, since I was curious what is actually included, and I stumbled upon this interesting little tidbit about my model of iMac:
https://discussions.apple.com/thread/2718054?start=0&tstart=0
I had previously wondered if I was hearing my mouse in my speakers as well (not just in logic). It appears that this model of iMac may have some grounding issues, as someone later in the thread suggested purchasing and using a ground loop isolator, which seemed to fix any extra interference for them.
Ironically though, I have since opened logic, and do not seem to be encountering my previous static issue(yet).
Fingers crossed, hoping that I will not be experiencing it again. Going to purchase a ground loop isolator, and continue to mess around with logic, just to make sure it was not just an internal audio issue with my iMac. -
How do I get my iphone to charge and not be stuck on 10% battery?
I have tried turning it off, turning it off with holding down both switches, charging it on different places for hours and now have it hooked up charging on my computer.Create a backup then restore the device as new, and test the issue.
iOS: How to back up your data and set up your device as a new device - http://support.apple.com/kb/ht4137 -
I used the wrong password to join my new belkin wifi. Now that I have the correct password, I can not get the to the join screen with the space to type in the password. I continue to get the unable to join message. I have put the touch to sleep and I have turned on and off the wifi and join options on the Network screen page. Does anyone know how to get pass this block of the wrong password to a new page that will allow me to type in the correct password. I see there is a option that asks if I want to reset the network settings.. is that what I should do? and what does it erase when I do that? Thanks for any input anyone has.
Yes. Reset network settings. Head to Settings -> General -> Reset and tap Reset Network Settings.
B-rock -
My ipod just will not sunc its like the itunes doesn't read it. Please help i can't update my ipod if itunes can't read it. I have tried all that it says in the help for me to do i have even uninstalled and reinstalled itunes but there must be something going wrong in my itunes. How do i fix this problem?
Try disabling a/v software and turning off the Firewall on your PC.
Disable antivirus software
Turn-Windows-Firewall-on-or-off
Then try syncing your iPod.
If that doesn't help click here. iPod touch sync support -
when i plug in my ipod nano (6th generation) a message on itunes saying the ipod is 'detected but not identified'- i've spent all day trying to fix it and nothing seems to work so i can't sync any songs..
Hello beafraser,
Here's an article to help troubleshoot when your iPod is detected but not identified.
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/ts3218
Hope that helps.
Thank you for visiting Apple Support Communities.
Nubz -
Whenever i try to sync my ipod a message keeps coming up saying "1 or more items could not be synced", apparently its error -69. Please help, i've tried rebooting my laptop, installing the latest itunes and turning off the wifi but nothing seems to work.
Are you using security software on your PC? If yes, try to disable the software or check the settings. More info here: http://support.apple.com/kb/TS3125
Maybe you are looking for
-
Oracle 11g on Windows server 2003
I've oracle 11g installed on Windows Server 2003. I have installed oracle 11g twice, so wasn't sure how to uninstall one version without effecting the other. There are a few databases set up, none of which are now working. Trying to connect using mys
-
In VA45 the coloum order quantity is showing the targeted quantity
Hi Friends, In VA45(Lists of contracts by partners) I belive in the coloum of Order Qunatity the total sales quantity has to be shown but the system is showing the entire targeted quantity. i have created an contract for 50 quantity and if i order fo
-
HT1688 Is anyone having issues with iOS7 Siri? (iPhone 5s)
On multiple occasions during the day I'll ask Siri to remind me.... With a long pause she'll say "I'm really sorry but I can't take your request right now please try again later. Then I'll try right after and she'll work. Very frustrating. iOS6 w
-
I have a Canon i9950 firewired to my Macpro. When i try and print a multi page document (27 pages pdf file) the printer 'hangs' after about 3-4 pages. The printer dialog box says "processing page", I can see two of the processors working 100% (using
-
Avast deny adobe air with ane @android platform
report as android:OpFake-FE[Trj]