I am not able to telnet my content rule VIP address

I am not able to telnet my content rule VIP address and port number. But I am able to direct to telnet to service servers, which are added into the content rule set. Can anyone tell me why. I have update the latest WEBOS 5.00 Build 69. The content switch model is 11050. thank you very much .

Is possible one armed and in line in the same content switch ?
Currently I have some content rule are using one armed solution, there is only one rule I need to make the server see the original IP. I guess my question is , can I have this rule use in -line solution only, so I will not have to impact other rules set.
The other question since this content rule's service sever have only one interface only, Can I have this in-line solution go in the content switch and come out content switch in the same server farm switch ? Thank you for all the help.

Similar Messages

Not able to view the content in Microsoft help viewer (MS VS 2012)

Hello Team,
I'm Rahul from Daimler-Chrysler, Bangalore location. I’m the IT Engineer for Daimler-Chrysler.
We tried many settings in IE but still not able to resolved. So i need more expert help.
My customer having one issue-
# User is not able to view the content in Microsoft help viewer (MS VS 2012), below is the error: Its opening in HTML Format.
So please help me. Contact no- +91-9972004298. and personal id:- [email protected]/[email protected]
I call you to Microsoft customer care they advice me to ASK Question. Please help me, I'm waiting for your reply.
Thanks,
Rahul B. Patil.
+919972004298.

Hi Sri,
it looks that your HANA instance has been created before we enabled the web-based development workbench. Some privileges are missing, we can't migration those existing instances.
Nevertheless you can ignore the error above. You can see all the content inside your instance "smstest1".
If you want to get rid of the cosmetic issue. You might delete this instance and create a new one.
Best regards
Xu

I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts

I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts. All the instructions on synching start with "find your device in the device window". But what if you have no device window?

Missing "message" from above: The iPad "DGMTR" is synced with another iTunes library on DGMTR's MacBook Pro. Do you want to erase this iPad and sync with this iTunes library? An iPad can be synched with only one iTunes library at a time. Erasing and syncing replaces the contents of this iTunes library.
I thought the libraries were the same.

Not able to see the content of opened files (.jpg or .psd) in Photoshop CS6

I recently downloaded Adobe Design and Web Premium CS6. I am not able to see the content of any of the file I open (.psd or .jpg). I do see the file has been opened as the file name appears on the open file tabs, I also see the preview of the file in the Navigator Window and list of layers in the layers window. I am relatively new to this so might be missing on some option that needs to be turned on or something.
I am using Window 7 Professional, Service Pack 1, with 8GB RAM.
Any suggesstion/help is greatly appreciated.

This is going to be the weak point:
Intel(R) HD Graphics card
While the Intel HD chip is fine for general computer work, it is weak for programs, like Photoshop and Adobe Premiere. The driver support is usually very bad, as well. If Lenovo does not have updated drivers, that work better, about the only choice that one has with a laptop is to turn OFF graphics accleration, and wait for a new driver. That will probably be very slow in coming.
Good luck,
Hunt
PS - Noel's link will list what you are missing.

Not able to add more content in a topic

Hi,
I am working on a project in RoboHelp7. The final output that I will be giving are seperate html files.
The problem that I am facing is, even if the helpbody height is set to auto, I am not able to see that content I add into a topic after a certain length.
However, the content that I've added can be seen if I open the html file of that topic.
Please help!!
Thanks,
Divya

Where are you setting helpbody height?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Services are running in Server 2008. But still not able to telnet on localhost

Hello Everybody,
Desired services are running on server but still telnet on localhost not happening.
From remote server I am able to telnet on same services.
I am facing issue while doing telnet to remote server alos.
Is there anything which could stopping telnet operation.
From same server I am not able to telnet to other server for SQL services, whereas both servers in same LAN with adjacent IP address.

Hi Steven,
Thanks for response.
I have checked same. Services are listening on desired port.
From events log we observed that server moving out of domain controller which root cause not identified yet.
Will it be possible if sever moving out of domain and getting NETLOGON issue. Which could block communication to other server or localhost telnet.
Regards,
Mahesh D.

I can't seem to remember my security answers and I'm not able to set up a rescue email address and Idon't know what to do.

I can't seem to remember my security answers and I'm not able to set up a rescue email address and I don't know what to do.

You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(107599)

Not able to activate the transfer rule and change the transfer rule plz adv

hello friuends..
i m not able to change my transfer rule . i m getting below msg.
InfoObject 0BASE_UOM of communication structure still being used
Message no. RSAR741
Diagnosis
The deletion of the communication structure for InfoSource 8ZPOS_O13 is not possible. InfoObject 0BASE_UOM of the communication structure is still being used. This use must be undone first.
Concretely the communication structure of an InfoSource can only be deleted if there are no update rules for InfoCubes and no transfer structures for source systems for this InfoSource.
System response
Activity was finished without database change.
Procedure
Check the use of your InfoSource 8ZPOS_O13 in the transfer structures. Delete all existing transfer structures of your InfoSource 8ZPOS_O13.
Check the use of your InfoSource 8ZPOS_O13 in update rules for InfoCubes. Delete all existing update rules for your InfoSource 8ZPOS_O13.
Afterwards, you can delete your communication structure for InfoSource 8ZPOS_O13.
where as i have deleted all update rule for the infosource ZPOS_O13 . but still i m not able to change it .
I have check ed it and it not lock in any req . so please let me know how can i proceed .
Thanks in advance.

hi Jain,
you may need to check the transfer structures,
right click infosource and 'change', click 'comm.structure'/expand,
click 'transfer', move the 0BASE_UOM from left to right side,
or if you wont use the comm structure anymore, you can right click infosource and 'delete comm structure'
hope this helps.

Not Able to Telnet or SSH Cisco ASA

Hi,
I am not able to do the following to Cisco ASA with one IP address 172.19.1.11, below is the configuration in ASA. Earlier it was working, all of a sudden it stopped working.
Please help.
1. Not Able to SSH
2. Solarwinds not able to take information from ASA.
http 172.19.1.11 255.255.255.255 inside
snmp-server host inside 172.19.1.11 community srnemapd
telnet 172.19.1.11 255.255.255.255 inside
ssh 172.19.1.11 255.255.255.255 inside
ntp server 172.19.1.11 source inside prefer

Hi there,
Just add a new IP address for ssh to ASA, this will kick start the demon.
This new IP does not have to be a real one.
Hope this helps.
Thanks
Rizwan Rafeek

HI not able to see business content in sap bi7.0

Hi GUru's,
We have upgraded from BW to BI 7.0 recently,
but we are not able to see any business content objects like
0sd_co1.predefined objects in rsa1 screen
Can anyone please help me out.

Hi Venkat,
did u check it out for the BI component.
check in your sys..........
menu -
> system----
> status.
If itz not there try to install the BI component.
Regards,
Vijay.

IView not able to create in content admin

Hi,
I am using EP7.0 .In portal content admin I am not able to create iView, Page, WS, Role or Folder.
Once I am going the navigation path - content admin<portal content<end user content<ESS and right clicking it is not displaying any portal content option. It displaying open<open in new tab etc.How we can resolve this error? Log off option is also not responding in portal page. Please give the solution.
Thanks

Kuku,
Looks like you might be accessing your portal with the IP address instead of FQDN.
EX: Instead of using http://10.10.1.10:50000/irj/portal use the FQDN like the one below.
http://abc.xyz.com:50000/irj/portal where abc.xyz.com is the fully qualified domain name.
Hope this helps.
@ Bala :
I have been working on IE 7.0 for a long time now.
Cheers!
Sandeep Tudumu

Not able to access KM Content in EP after successfull installation

Hi all,
I had installed CO & CM (EP 6.0 SP2). I was able to access KM Content under Content Management immediately after that. But when i restarted my dispacther and logged into the portal, i was getting this exception in KM content area:
Exception class: class com.sapportals.wdf.WdfException
Exception Message : The URI "null" you tried to navigate to does not exist. It has either been deleted or you have no access rights.
Any idea why this is happening? I had already done the insatllation twice because of this error (after restoring the Backup, ofcourse). Any pointers would eb of great help.
Thanks,
Ramya.

Hi,
Which Patch r u in. We got this error while installing EP6SP2Patch5. did u install correct database patch. Look at SAP Note 523026 -->Exceptions if DB Patch does not correspond to CM coding. Let me know if u need anything else. some more useful CM notes are 742763
Thanks,
Praveen
PS.Dont forget to reward points if useful/solved

Not able to watch purchased content on apple tv

I have been having issues with my apple tv for a few months now!
I get as far as the purchased tv show episode within the menu and when I hit play and it say "there is an error connecting to iTunes"
I cannot get the latest up date either. I was having Internet connectivity issues, but moved my modem closer and now vevo and YouTube work, just not my purchased content.
It was also freezing up on me contuously, but I reset it and so far it's been ok.
Is my hard drive pooched?

Hello there, Orrshaw.
The following Knowledge Base article offers up some great trecommendations for troubleshooting issues with connectivity and your Apple TV:
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
If you are unable to access or play content while connected to a Wi-Fi network
Restart your Apple TV: Choose Settings > General > Restart.
Verify that you are selecting the correct network if you are in a location with multiple Wi-Fi networks.
Check the IP address that Apple TV is using. If it starts with 169.x.x.x, the router may not be configured properly.
If the router is using DHCP addressing, verify that the router is not limiting the number of devices that can connect through Wi-Fi.
If the router is using manual IP addressing, you will need to configure Apple TV with a manual IP address. You can do this by selecting your network on the Apple TV and choosing Configure IP.
Disconnect and rejoin your Wi-Fi network by selecting your network on the Apple TV and then choosing Forget Network. Rejoin your Wi-Fi network after it disconnects.
Verify that your Wi-Fi router is not using security features that may restrict content or devices:
If your router has a built-in firewall, you may need to adjust your settings to provide access to common ports used for services. For more information, see Apple TV: TCP and UDP ports and protocols.
If you need to add the MAC address to the access list for the Wi-Fi router, the MAC address is listed as the Wi-Fi address in Settings > General > About.
Update your Wi-Fi router to the latest firmware.For an AirPort Base Station, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
If possible, connect using Ethernet and verify that you can play content. If you are able to successfully play content using Ethernet, verify your Apple TV is using the latest software by choosing Settings > General > Software Update.
Note: When using a public or commercial network that requires a login or subscription, Apple TV may not be able to connect to the Internet. Check with the network administrator for assistance.
If you tried all of these steps and your Wi-Fi issues persist, contact Apple technical support or take your Apple TV to the nearest Apple Store or Apple Authorized Service Provider (AASP) for diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Not able to edit Promotions PMDL rule through ACC

Hi All,
Not able to edit PMDL rule(Condition and Offer property) for the existing promotions through ACC.It says "This version of PMDL not supported.
Thanks
Siva

Siva
If the promotion was originally deployed from BCC, then you wont be able to edit the condition/offer via ACC.
As an alternative what you can do is create another promotion from ACC with a similar condition/offer and disable the previous one.
If you want to see atleast the condition and offer, for that you can query that promotion id in dyn/admin and see its pmdl xml.
Hope this helps!
~Gurvinder

Not able to capture HD content from Sony HDR-HC3

I recently purchased Final Cut Express 4, after successfully using iMovie HD for the past year. I successfully captured some DV content (non-HD) from my Sony HDR-HC3 for a project. However, when trying to capture HD footage for a 2nd project, I'm not getting anything. Here's the info:
* I made the change in "Easy Setup..." to set the format to HD using Apple Intermediate Codec 1080i60.
* The footage was shot at 1080i on my HDR-HC3.
* The camera is plugged in via FireWire.
* When I choose "Capture", the the HDV Capture dialog comes up asking me for a file name. Once I give it a file name and click the Capture button, the tape starts playing and I get a black window with "Final Cut Express" in the middle (and the Apple logo). At the bottom, it says "CUEING TAPE (press 'esc' to stop)". When I press 'esc', the tape stops and the black capture window goes away.
* I never see a preview in the capture window, but I see the footage fine in my camera's LCD screen.
* A folder is created in the Capture Scratch folder, with the name I gave in the HDV Capture dialog, but nothing is ever written to this folder. It's empty.
I'm not sure what I'm doing wrong...I just don't seem to be capturing any video...FCE is seeing my camera and is taking control (starting and stopping) but nothing is actually being captured.

Ok, I figured it out on my own. Operator error.
When I had captured non HD content using my camera, I had to set the iLink (FireWire) conversion to "On - HDV-->DV" in the camera in order for it to work. I forgot to set it back to "Off", so the camera was downconverting to DV when output through FireWire. Once I turned off the conversion, I was able to capture in HD.

I am not able to telnet my content rule VIP address

Similar Messages

Maybe you are looking for