I am not able to type in word,what is the solution?

I am using os yosemite after installing it I could never able to type anything in word.

You should contact Microsoft for Mac Support and/or post in their forums.

Similar Messages

Hi. I have a ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.Also my home button isn't working.

Hi. I have an ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.For ex. when i hit 8 (which is the second number in my passcode) the number 5 type in. Also my home button isn't working. Hope that was specfic enough.. thanks!!

Place the iOS device in recovery mode with one of thes programs and then restore via iTunes
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:

HT1695 my internet is not connecting in my "iphone 4s" what is the solution please help

my internet is not connecting in my "iphone 4s" what is the solution please help

Contact the carrier.

Finder says "1.27PB available" NOT "200 GB". Why? What's the solution?

The Finder on my Mac says there is 1.27PB available on my internal hard disk instead of "200+GB available". Does anyone know why or what the solution is? The Finder does however display the available capacity on a portable drive correctly..

In the end I decided to contact Apple technical support and they talked me through an S.M.C. reset, a P.R.A.M. reset, directed me to run Disk Utility and do a check of the disk with Disk First Aid & Disk Permissions, and ultimately I was told I should boot up in recovery mode after Safe Mode showed the issue was systemwide, and reinstall O.S. X fresh from the closest Apple server and not use a copy of the installer for 10.10.1 I had saved, which meant my Mac was incapacitated for about 8 hours, but once it was finished the erroneous display of the available storage capacity issue had been eliminated.
There was another issue of having trouble downloading files, but when I acted on my idea of trying a different V.P.N. server than the one I had been using that issue disappeared too.
I don't know whether what you suggested would have made any difference to the issue, but my Mac works properly again so I am happy. I do however, appreciate your directing me to try what was suggested to you and I hope your Mac is going well too.
Cheers!

Why am I not able to type in new URLs in the location bar either in my current tab or any new tab in the middle of my session? I've never had this problem with any other version of Firefox.

For example, I had several tabs open in Firefox 4 just now. For no apparent reason, when I opened a fifth tab, I couldn't click on the location bar or type anything into it even with repeated attempts. I either have to start Firefox again or try going back to a tab that is already open with a page loaded and type into the location bar there. That worked for me to be able to get to this website. This is very frustrating and seriously hampering my ability to use Firefox--which I have previously always been impressed with. I have a 2 year old Dell Optiplex 755 running Windows Vista.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Not able to type in arabic in reports builder 6i

hi
i have the language arabic in my PC ie i am able to type word documents in arabic,
i have to do arabic report in apps 11 i ,the report builder i have is 6i
i set NLS_LANG to ARABIC_UNITED ARAB EMIRATES.AR8MSWIN1256 in the registry before opening reports builder but still i am not able to type in arabic in reports builder 6i
kinldy guide me
thanking in advance

Hi,
i set NLS_LANG to ARABIC_UNITED ARAB EMIRATES.AR8MSWIN1256 in the registry before opening reports builder but still i am not able to type in arabic in reports builder 6iWhat do you mean by you are not able (is it garbage or you cannot use the Arabic keyboard)?
Can you view any Arabic report (labels/text/data ..etc)?
Regards,
Hussein

I am trying to authenticate at Filevault preboot using external Serial (RS232) to USB convertor where USB port is connected to my mac machine.But on preboot I am not able to type the password using console where my machine is connected.

I am using an external keyboard which is actually a Device KeyAT who do the keyboard simulator kind of operation over Serial (RS232) to USB connector.
I have a controller machine connected with Serial Port and MAC machine is connected by a USB port to that device.
I am able to type the password on OS X login screen but on using the same device and set up on Filevault preboot I am not able to type the password.
This connector is detected as a USB 2.0 composite device in System Hardware table.
Can someone hints or point out a potential cause or to rectify this issue.
Thanks in Advance.

Which os version are you using?
Which iPod Nano model do you have? iPod Models
iPod not recognized in iTunes and Mac desktop

Not able to type a password when trying to create a domain

Hi,
I am trying to create a domain and in that wizard, in Administrator name and password for weblogic user, I am not able to type the password. Whatever I type it doesn't get reflected in the UI . if I press Next button Error comes as password is mandatory. I am using Linux OS.
P.S. I am able to type in Name and description fields.
Kindly advise.
Regards

If anyone else face this issue, then here comes the resolution -
Password Field Not Editable in Domain Template on Linux
Bug: 10394900
Added: 01-May-2011
Platform: Linux
On Linux, when creating a new domain using a developer template in the Oracle Fusion Middleware Configuration Wizard, the password and confirm password fields are not editable, and you cannot enter a password to create a domain.
Workaround: Do one of the following:
To work around the issue each time it occurs: Click the close window "x" button in the upper right corner of the Configuration Wizard. In the confirmation dialog that appears, click "No" to return to the Configuration Wizard. Now you can enter the password and confirmation password.
To fix the issue permanently:
Kill a scim processes. For example, kill "pgrep scim"
Modify (or create) the file ~/.scim/config to include the following line:
/FrontEnd/X11/Dynamic = true (follow case sensitivity)
If you are running VNC, restart the VNC server.
Run the Configuration Wizard again.
Regards,
Anuj

I installed new OS to my IPhone 4 and now phone gets hangs and not able to type or chat .. how to resolve it now

i installed new OS to my IPhone 4 and now phone gets hangs and not able to type or chat .. how to resolve it now

Try a reset to begin with. hold down the Sleep and Home key until Apple logo appears on the screen.
Regards,
Steve

V490 server not able to type at ok prompt

Hello Guyz
The problem is that when I power on the server with max diag post it will drop at ok prompt with all post result passed. But I am not able to type anything at ok prompt. Input device & Output device are set to ttya when checked from os console. Since autoboot parameter is true it will boot automatically when i do a normal power on. RSC is not configured and I am not getting anything on it. Also graphics card not available in server.Troubleshooting steps done till now.
1. Powered on server in normal mode and with disk drives removed. It will stop at ok prompt with error cant boot. But not able to type anything.
2. Replaced PCI riser card which includes NVRAM.
3. Tried powering on the server with all minimum configuration possible still no luck.
4. Swapped the only one system board to other one and checked.
My seniors suggested to replace system board. What you guys think? Please help. Thanks..

midhu wrote:
I am using putty software and cisco cable with usb-to-serial converter which is connected to ttya port of server on one end and usb port on my laptop for getting the console of server. Also I am using default baud rate which is 9600.That all seems fine, except...
Historically, USB-to-serial adapters will often just fail to function in such circumstances.
There are numerous posts in these forums that go bazck more than a decade (through migrations from old Sun forums, even) that mention such USB adapters. They're not necessarily broken to where you need to replace it. They often just do not work. They won't send/receive the duplex signals you hope to have so that `send` at the laptop becomes `receive` at the V490, and `send` at the V490 becomes `receive` at the laptop. The symptoms are as you described: you can see but not type, or you can type but not see.
I suggest you go beg, borrow, or claim by eminent domain an old computer that has an actual hardwired serial port and try again.
I know. All this shouldn't be that hard, and it's frustrating. It should "just work".

MacBook Pro - After Battery dies I'm not able to type in login window, until forcing a restart

Hi, as mentioned in the header : MacBook Pro - After Battery dies I'm not able to type in login window, until forcing a restart
After the battery drains to 0% the computer switches off.... *Makes sense*
Once I put the charger power chord back in for an extended period of time I hit the power button and then see the login screen.... *Makes sense*
However it won't let me type into the login box therefore having to force a restart and lose any saved data or data open when it died of battery. *WEIRD*
This happens every time my computer runs out of battery. I understand that obviously not letting the laptop die is a good idea, however it seems like there is something wrong as it allows me to login yet won't let me type anything...
Any solutions? Anyone else experience this?
I have an early 2012 MacBook Pro - 15 Inch Screen.

Hi s4mboy,
Thanks for visiting Apple Support Communities.
I'd start with resetting the SMC and PRAM on the MacBook Pro:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
OS X Mountain Lion: Reset your computer’s PRAM
http://support.apple.com/kb/ph11243
Cheers,
Jeremy

I am not able to type anything in the address bar or click on any menu options with the browswer. The whole browser is just stuck, I cant do anything in it. It loads up fine but nothing can be done at all within the broswer.

I am not able to type anything in the address bar or click on any menu options with the browswer. The whole browser is just stuck, I cant do anything in it. It loads up fine but nothing can be done at all within the broswer.

Hi,
( I search for iChat questions when I have finished in the iChat Forum)
So the menu bar reads iChat, File, Edit, View, Buddies, Video, Window and Help
There is no Buddy List open.
There is no other window for iChat open.
In the iChat Menu you only have access to Status.
Is an item ticked in the list ?
Is this a green (Available item) or Red ( an Away one) ?
Can you access the Accounts option ? (Sitll in the iChat Menu)
Is anything in here ticked ?
In the Window menu any Logged in account should appear in the list (Between the Next Chat and File Transfer items)
It would be useful to know which version of iChat this is.
If no account is ticked (iChat Menu > Accounts) or not showing in the Window Menu, plus you cannot determine the Status and you cannot access the Preferences then you need to access your Home Folder/Library/Preferences
As the Library in the Home Holder is Invisible in Lion you will need the Finder's Go Menu > Go to Folder option (you can use it in earlier OS versions if you want)
Type in:-
~/Library/Preferences
Find the file called com.apple.ichat.plist
Drag it to the Trash and Restart iChat.
This will lose all the settings in iChat that you have changed from Defaults but there is no way around this.
9:23 PM Saturday; August 27, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Not able to print double sided or into the mailbox of our "Canon Image Press C1" anymore

Maybe someone can help me.
Yesterday I noticed, that I am not able to print double sided or into the mailbox of our "Canon Image Press C1" anymore (InDesign Version 6.0.4).
At the end of january I printed double sided the last time and it worked.
Right now, I can choose "double print", but the system does not keep it. I tried with different documents already and it didn't work, so it can't be just that one file. Since everything works out of other programs like Adobe Acrobat or MS Word, it can not be printer bug; it's pretty much my impression that it must be a InDesign bug.
So if somebody has any idea .... please help :-(
Thank you in advance
red witch

Sorry that I forgot about the operating system, but I am new so you may forgive me about that ...
I am working with a PC. Last week I was working in a document and suddenly the side window did not show the sides anymore. Our IT department took a file from my collegues PC and copied it to my PC, after this the sides where shown again. Since my colleque has got the same basic problem, I think something went wrong on the installation. I am not the expert with this installation stuff.
Bye
red witch

Not able to see Metadata fields when adding the fields to the rule in UCM

Not able to see Metadata fields when adding the fields to the rule even after creating them in information fields of configuration manager.It is happening for few fields only.We are using 10.1.3 version of UCM.Kindly provide a solution if any.

Dhilipan,
I am trying to setup AES at the current Customer.
You are right on LR_JP to be linked to customs code list instead of ACE and I do achieve that if I were to maintain the Custom code list by maintaining the assignment for EAR in a separate test.
I was infact trying to follow the link: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30c7015e-c191-2d10-71b9-95907dc8edd1?overridelayout=t…
On this document, if you look at page# 14 thru 17, it has the steps I described in my original note with customs code still appearing in the drop down for 'EXCPT' for EAR.
Nevertheless, I wanted to default Type = C50 when the license type for the line on the Customs declaration is 'EXCPT' but if you see the very last screen-shot below, even though the license type configuration has default value as 'C50' it did not get pulled into the line item Documents tab when I tried to pick the category as 'CUII'.
Let me know your thoughts on defaulting the data into Customs declaration for AES filing.
What I want to achieve is the following:
When License type is 'EXCPT', system should default the type as 'C50'
Should put the License type 'EXCPT' into the number field
Should put the actual License# 'ENC' into the Supplement field
Should put the ECCN # '5A002' into the Details field
Thanks,
Prashant.

HT3819 how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?

how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?

Oops, I forgot a step between 7 and 8 ... before syncing the iPhone I need to explicitly send the document back to iTunes on the iPhone, or the changes won't come over at all ...
and then one more thing ... Numbers on iOS does NOT recognize a number of key features of the OSX app, such as conditional formatting ... so after editing my document on iOS and syncing it back to OSX on my Mac, all of those settings are lost (no more conditional formatting, have to do it all over again)
What am I doing wrong ?

I am not able to type in word,what is the solution?

Similar Messages

Maybe you are looking for