I am not able to update my i pad

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.htmlhttp://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

Similar Messages

Not able to update PO in SRM 7.0

Hello,
I am not able to update PO using BBP_PD_PO_UPDATE.
The way I am using all FM's in my program is as below
1. BBP_PD_PO_GETDETAIL
2. BBP_PD_PO_UPDATE - Importing parameter lv_changed returning value X but not saving the data
3 BBP_PD_PO_SAVE - Paasing GUID as GUID returned in UPDATE FM
4. COMMIT WORK AND WAIT.
any pointers to solve my problem
Thanks,
Arun.

Always check the ET_MESSAGES when calling the update. If there are "A" type of messages, it's not going to update. If there are "E" type of messages, depending on your "SAVE" or "HOLD" flag, it might not update either.

Not able to update the project using 'BAPI_PROJECT_MAINTAIN'.

I want to create a project , with reference to an already existing project.
I am using 'BAPI_PROJECT_GETINFO' to get the data of the existing project.
The bapi gives the following:
1)     e_project_definition.
2)     e_wbs_element_table.
3)     e_wbs_hierarchie_table
I am passing the u2018e_project_definitionu2019 to 'BAPI_PROJECTDEF_CREATE' to create project.The project is created successfully.
But I am not able to update the project with u2018e_wbs_element_tableu2019
and u2018e_wbs_hierarchie_tableu2019. I am using 'BAPI_PROJECT_MAINTAIN' to update the project.
The program is not giving an error, but it is also not updating the E_WBS_ELEMENT_TABLE and E_WBS_HIERARCHIE_TABLE.
I am attaching the code below.
*& Report ZTEST_PC.
DATA: project_definition   TYPE bapipr-project_definition,
      with_activities      TYPE bapipr-with_activities,
      with_milestones      TYPE bapipr-with_milestones,
      with_subtree         TYPE bapipr-with_subtree,
      e_project_definition TYPE bapi_project_definition_ex,
      return               TYPE bapireturn1.
DATA: i_wbs_element_table         TYPE TABLE OF     bapi_wbs_elements,
      e_wbs_element_table         TYPE TABLE OF     bapi_wbs_element_exp,
      e_wbs_milestone_table   TYPE TABLE OF bapi_wbs_milestone_exp,
      e_wbs_hierarchie_table TYPE TABLE OF bapi_wbs_hierarchie,
      e_activity_table        TYPE TABLE OF bapi_network_activity_exp,
      e_message_table         TYPE TABLE OF bapi_meth_message.
DATA: wa_wbs_element_table    TYPE      bapi_wbs_element_exp,
      wa_wbs_hierarchie_table TYPE bapi_wbs_hierarchie.
DATA: l_new_proj_no TYPE prpss-posid.
DATA: l_project_definition        TYPE bapi_project_definition.
DATA: l_project_definition_upd    TYPE bapi_project_definition_up.
DATA: l_project_definition_stru   TYPE bapi_project_definition.
DATA :l_pspnr      TYPE ps_intnr,
      l_pspid      TYPE ps_pspid,
      l_pro_def(9) TYPE c.
DATA :l_proj TYPE proj.
DATA :l_len TYPE i VALUE '0'.
DATA: lt_dd03l TYPE TABLE OF dd03l,
      ls_dd03l TYPE dd03l.
DATA: fieldname(50), fieldname1(50) TYPE c.
DATA: p_ddic_name(40), struc(40), fun_struc(50) TYPE c.
FIELD-SYMBOLS: <struc>, <c>, <sc>, <def_field> TYPE any.
DATA : i_method_project    TYPE TABLE OF bapi_method_project,
       wa_method_project   TYPE bapi_method_project.
DATA : l_index TYPE bapi_method_project-refnumber.
DATA : it_wbs_element_table         TYPE TABLE OF bapi_wbs_element,
       it_wbs_hierarchie_table      TYPE TABLE OF bapi_wbs_hierarchie.
DATA : wl_wbs_element_table         TYPE bapi_wbs_element,
       wl_wbs_hierarchie_table      TYPE bapi_wbs_hierarchie.
DATA : l_wbs_element_table_update   TYPE bapi_wbs_element_update.
DATA : i_wbs_element_table_update   TYPE TABLE OF bapi_wbs_element_update.
Get the project info of the Project 'C01.10995'
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_INPUT'
EXPORTING
    input = 'C01.10995'
IMPORTING
    output = project_definition.
CALL FUNCTION 'BAPI_PROJECT_GETINFO'
EXPORTING
    project_definition     = project_definition
IMPORTING
    e_project_definition   = e_project_definition
    return                 = return
TABLES
    i_wbs_element_table    = i_wbs_element_table
    e_wbs_element_table    = e_wbs_element_table
    e_wbs_milestone_table = e_wbs_milestone_table
    e_wbs_hierarchie_table = e_wbs_hierarchie_table
    e_activity_table       = e_activity_table
    e_message_table        = e_message_table.
Automate the process the process to get the next number for the func module 'CN_SUCHE_FREIE_NUMMER'.
CLEAR : l_pspnr, l_pspnr, l_pspid, l_pro_def.
SELECT MAX( pspnr ) FROM proj INTO l_pspnr.
SELECT SINGLE * FROM proj INTO l_proj WHERE pspnr EQ l_pspnr.
l_pspid = l_proj-pspid.
CALL FUNCTION 'CONVERSION_EXIT_ABPSN_OUTPUT'
EXPORTING
    input = l_pspid
IMPORTING
    output = l_pspid.
l_pro_def = l_pspid+4(5) + 1.
CONDENSE l_pro_def.
CONCATENATE 'C01.' l_pro_def INTO l_pspid .
function module to generate the nect free number between the given range.
CALL FUNCTION 'CN_SUCHE_FREIE_NUMMER'
EXPORTING
    search_imp = '2'
    prps_s_imp = l_pspid
    prps_e_imp = 'C01.29999'
    no_dialog = 'X'
IMPORTING
    prps_exp   = l_new_proj_no.
IF sy-subrc <> 0.
EXIT.
ENDIF.
Update the fields of 'l_project_definition_upd' as 'X' for the fields which has values in 'E_PROJECT_DEFINITION'.
Get the New Project Number.
MOVE-CORRESPONDING e_project_definition TO l_project_definition.
l_project_definition-project_definition = l_project_definition-project_definition+0(3).
l_new_proj_no = l_new_proj_no+4(5).
CONCATENATE l_project_definition-project_definition '.' l_new_proj_no INTO l_project_definition-project_definition.
TRANSLATE l_project_definition-project_definition TO UPPER CASE.
MOVE-CORRESPONDING l_project_definition TO l_project_definition_stru.
Create the New project with the New project Number.
CALL FUNCTION 'BAPI_PROJECTDEF_CREATE'
EXPORTING
    project_definition_stru = l_project_definition_stru.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    wait = ' '.
Populate internal table i_method_project for the bapi_project_maintain func module.
CLEAR : wa_wbs_element_table,wl_wbs_element_table,wa_wbs_hierarchie_table,
        wl_wbs_hierarchie_table, it_wbs_element_table, it_wbs_hierarchie_table.
CLEAR : wa_method_project, i_method_project, l_index .
l_index = 0.
LOOP AT e_wbs_element_table INTO wa_wbs_element_table.
MOVE-CORRESPONDING wa_wbs_element_table TO wl_wbs_element_table .
APPEND wl_wbs_element_table TO it_wbs_element_table .
wa_method_project-objecttype = 'WBS_ELEMENT'.
wa_method_project-method     = 'CREATE'.
wa_method_project-objectkey = wa_wbs_element_table-wbs_element.
l_len = strlen( wa_wbs_element_table-wbs_element ).
Setting Levels as reference number.
CASE l_len.
    WHEN '9'.
      l_index = 1.
    WHEN '12'.
      l_index = 2.
    WHEN '15'.
      l_index = 3.
    WHEN '18'.
      l_index = 4.
ENDCASE.
wa_method_project-refnumber = l_index .
TRANSLATE wa_method_project-objectkey TO UPPER CASE.
APPEND wa_method_project TO i_method_project.
CLEAR :wa_method_project, l_index.
ENDLOOP.
l_index = l_index + 1.
wa_method_project-refnumber = ' '. "l_index .
wa_method_project-objecttype = ' '. "'WBS_ELEMENT'.
wa_method_project-method     = 'SAVE'.
wa_method_project-objectkey = ' '.
APPEND wa_method_project TO i_method_project.
CLEAR wa_method_project.
LOOP AT e_wbs_hierarchie_table INTO wa_wbs_hierarchie_table.
MOVE-CORRESPONDING wa_wbs_hierarchie_table TO wl_wbs_hierarchie_table.
APPEND wl_wbs_hierarchie_table TO it_wbs_hierarchie_table.
ENDLOOP.
Update the fields of 'l_project_definition_upd' as 'X' for the fields which has values in 'E_PROJECT_DEFINITION' respectively.
CLEAR : l_project_definition_upd.
p_ddic_name = 'BAPI_PROJECT_DEFINITION_UP'.
struc       = 'l_project_definition_upd'.
fun_struc   = 'E_PROJECT_DEFINITION'.
TRANSLATE: p_ddic_name TO UPPER CASE,
           struc       TO UPPER CASE.
SELECT * FROM dd03l INTO TABLE lt_dd03l WHERE tabname = p_ddic_name.
LOOP AT lt_dd03l INTO ls_dd03l.
ASSIGN ls_dd03l-fieldname TO <c>.
fieldname = ls_dd03l-fieldname .
CONCATENATE fun_struc '-' fieldname INTO fieldname.
ASSIGN (struc) TO <struc>.
ASSIGN COMPONENT <c> OF STRUCTURE <struc> TO <sc>.
ASSIGN (fieldname) TO <def_field>.
IF NOT <def_field> IS INITIAL .
    <sc> = 'X'.
ENDIF.
ENDLOOP.
Update the fields of 'l_wbs_element_table_update' as 'X' for the fields which has values in 'e_wbs_element_table' respectively.
READ TABLE e_wbs_element_table INTO wa_wbs_element_table INDEX '1'.
CLEAR : l_wbs_element_table_update, fieldname1, p_ddic_name, struc, fun_struc .
p_ddic_name = 'BAPI_WBS_ELEMENT_UPDATE'.
struc       = 'l_wbs_element_table_update'.
fun_struc   = 'WA_WBS_ELEMENT_TABLE'.
TRANSLATE: p_ddic_name TO UPPER CASE,
           struc       TO UPPER CASE.
SELECT * FROM dd03l INTO TABLE lt_dd03l WHERE tabname = p_ddic_name.
LOOP AT lt_dd03l INTO ls_dd03l.
ASSIGN ls_dd03l-fieldname TO <c>.
fieldname = ls_dd03l-fieldname .
CONCATENATE fun_struc '-' fieldname INTO fieldname.
ASSIGN (struc) TO <struc>.
ASSIGN COMPONENT <c> OF STRUCTURE <struc> TO <sc>.
ASSIGN (fieldname) TO <def_field>.
IF NOT <def_field> IS INITIAL .
    <sc> = 'X'.
ENDIF.
ENDLOOP.
Append the value of l_wbs_element_table_update TO the table i_wbs_element_table_update for Bapi_project_maintain.
CLEAR i_wbs_element_table_update.
APPEND l_wbs_element_table_update TO i_wbs_element_table_update.
CALL FUNCTION 'BAPI_PROJECT_MAINTAIN'
EXPORTING
    i_project_definition       = l_project_definition
    i_project_definition_upd   = l_project_definition_upd
TABLES
    i_method_project           = i_method_project
    i_wbs_element_table_update = i_wbs_element_table_update
    i_wbs_element_table        = it_wbs_element_table.
   i_wbs_hierarchie_table     = it_wbs_hierarchie_table.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    wait = ' '.
Please help me to solve the issue.

I am not sure why it is not working?? Try for any other alternate function modules.
But i see one issue with your coding, always check the return table message type and use commit work, instead of sy-subrc check. This fails for BAPI's

HT1414 I have an ipad2 and I would like to update it to iOS 6, but I have some apps that are always trying to update. I am not able to open or update them because they require iOS 5 or more. I'm not able to update to iOS 6 because of these apps. I get an

I have an ipad2 that has ios4.3.5 that I'm trying to update to iOS 6. I'm not able to update because of unidentifiable apps. I'm assuming that these are apps I tried to get but couldn't open because I needed iOS 5 or higher. These apps are still in my app store always needing updates, but I can't open or update because I don't have iOS 5. I can't delete them either because they can't be opened or aren't on my screen to hold/let wiggle/X. I need to remove these apps, but can't figure out how. Please someone tell me how

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 4: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you are updating using wifi, locate your iPad close to your router so you don't get a wifi dropout (can cause update corruption).
 Cheers, Tom

I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?

I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?

Hey there rmflint,
It sounds like you are wanting to update the Apps that were synced over from your computer to your new iPhone 5s. If you are clicking Updates in the App Store in the bottom right corner, would you mind clarifying what happens when you are trying to update them?
App Store at a glance
http://help.apple.com/iphone/7/#/iph3dfd8c19
Thank you for using Apple Support Communities.
Take care,
Sterling

How do i delete an old iCloud account from phone when I forget my password and I'm not able to reset it because my security questions do not match?! Help!! Currently not able to update any apps or icloud info

How do i delete an old iCloud account from phone when I forget my password and I'm not able to reset it because my security questions do not match?! Help!! Currently not able to update any apps or icloud info...

If your device is signed into an old ID of yours that is an earlier version of the ID you want to sign in with, do the following:
If you are using iMessage and FaceTime, make sure you are signed into these services with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then save any photo stream photos that you wish to keep to your camera roll (unless you are using iCloud Photo Library). When finished go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

IN APPLE STORE I WAS NOT ABLE TO UPDATE MY SOFTWARE AND THER IS ALWAYS AN ERROR 13 SHOWN WHILE UPDATING, IN APPLE STORE I WAS NOT ABLE TO UPDATE MY SOFTWARE AND THER IS ALWAYS AN ERROR 13 SHOWN WHILE UPDATING

In Apple store I was not able to update my software and ther was an error whenever i tried to update it ,error is 13

Did u try to delete ~/Library/Cookies/com.apple.appstore.plist yet?
Just an FIY, my first post are not steps, they are different ways of fixing the problem.
I.E.
Try #1. ->>Didnt work. Then Try #2. --> if that doesnt contact this post again. I will try to help you as much as I can before the need to reformat is considered.

HT204053 I am not able to update my apps because every time I am doing this, it is asking for a password which I have never used and the person who used it is in no more contact. how can i get my id instead of his??

I am not able to update my apps because every time I am doing this, it is asking for a password which I have never used and the person who used it is in no more contact. how can i get my id instead of his??

Apps can only be updated using the same Apple ID and password they were originally purchased with.

I am not able to restore my iPhone 5s and not able to update software to ios8 also please help me I have tried everything not even hard reset is working

Hello my iPhone 5s is not able to restore it from settings also and from iTunes also and I'm not able to update to ios8 also pls help me someone I wnt to update it and restore it when I restore it's shows update to ios8 when I do that it will start download and after few time it got error and stops there pls suggest me something

Hey alkarim2008,
If you are having an issue with being unable to update or restore your iPhone, I would suggest that you troubleshoot using the steps in this article -
Resolve iOS update and restore errors in iTunes - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

Well im not able to updated all the events I had in the imovie, HELP

Well im not able to updated all the events I had in the imovie, HELP

I have started preparing a small Database application
using JDBC with Swing.
I want to dispaly all the Table names which are
present in the Access Data Source. When i used the
Standard query for this "Select * from Tab" as in
SQL, an eror saying that "not able to resolve symbol
'Tab' ".
Can anybody please help me out to display the table
names?That query
Select * from tabwould work only for Oracle, as far as I know. There is no system table called Tab in Access.
***Annie***

Not able to update more than 10,000 records in CT04 for a characteristic

Hi all,
We are not able to update more than 10,000 records in CT04 for a certain characteristic.
Is there any possible way to do this?
Please advise...its a production issue.
Thanks.

Hello ,
Please consider using a check table for the characteristic involved if you are working with large
number of values assigned
With a check table you have a possibility to work with a huge amount of values , also the performance should improve
Please refer to the link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/ec/62ae27416a11d1896d0000e8322d00/frameset.htm
Section - Entering a Check Table
Hopefully the information helps
Thanks
Enda.

HT1222 I am not able to update my iPad to new version,needs any settings changes?

I am not able to update my iPad to new version,needs any settings changes?

How are you trying to update? Have you tried connecting your iPad to your computer running iTunes and update that ways? Please tell us what you have tried, what happened, and what if any, error messages you received.

TS1702 I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history

I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history lost.
Tried following up with the developer's instruction. Didn't help. Developer suggested contacting Apple if their instruction didn't work. Tried the various methods recommended on the Apple site. Same result.

Telling is that you tried most of the things on the net doesn't tell us exactly what you did try, so we are all still left to guess .....
Sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again
If that doesnt work - go to Settings>General>Date and Time - set the date ahead by a few months. Try to update again. If you get an error message of any kind - go back and change the date and time to automatic again. Then try again.
If that doesn't work, restart your router and reboot the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

I have updated iOS7 today via iTunes as I was not able to update it directly in the iPhone. After the update I restored the back up and now the iPhone is not getting started. Please advice?

I have updated iOS7 today via iTunes as I was not able to update it directly in the iPhone. After the update I restored the back up and now the iPhone is not getting started. Please advice?

That error message suggest you have a permissions issue. Make sure you have full read/write privileges for the Drive/ Folder location that you are copying the files to.

Not Able to Update the PSA Request.

Hi All,
I am facing one Problem I am having 10 requests in my PSA.9 requests are updated in to my Data Target but last 10th request is having some erroneous records which I didnu2019t notice that error records next day I have seen the error request in PSA then I have corrected those erroneous records. Now I am not able to update this request to my data target.
When I went through the PSA manage tab there I have selected the erroneous request and when I press the button Update with Scheduler that is going to the Info Package Screen there I am not able to see my data target. When I start the info package its giving error (Data Target is not defined)
My data target is contain the Aggregates is there any issue with the Aggregates.
Any one please advise on this how to update this error request.
Advance Thanks.

Hi Sudheer,
check your authorization, it seems you have only loading authorization not deleting.
creat one more infopackge and select PSA and datatarget option try loading using this infopackage.
Regards
Daya Sagar

I am not able to update my i pad

Similar Messages

Maybe you are looking for