I am not able to upgrade from ios 7 beta version to the Gold master version

Hello everyone,
I had downloaded ios 7 betaversion from apple, but now its not letting me get updated to the Gold Master version. Whenever i go to the software update on my iphone it says your software is upto date. ie ios 7. I do not get new ringtones or wallpapers on my device.
Can anyone help me?
thanks

Welcome to Apple Support Communities
If you have the Snow Leopard DVD, read "Resetting your original administrator account password" > http://support.apple.com/kb/HT1274
Then, check that your computer is supported > http://www.apple.com/osx/specs. If it's supported, open the App Store and purchase Mountain Lion. Make a backup of your files and check that your applications are compatible > http://www.roaringapps.com
When the download finishes, the OS X Mountain Lion installer will appear, so follow the steps. After upgrading, open System Preferences > iCloud, and set it up, so you will be able to use iCloud on the computer

Similar Messages

NOT ABLE TO UPGRADE FROM CUE 1.1.2 TO CUE 2.3.1

Hello,
I am trying to upgrade from CUE Ver 1.1.2 TO CUE 3.2.1 by "Upgrading Using the Boot Helper" method
but after uploading the "cue-installer.2.3.1" from the TFTP the system boots up but it does not show me the
"Service Engine Helper Software" Its booting directly and going to the CUE Prompt.
MODULE DETAILS
Module Type: NM
NAME: "NM-SE on Slot 1", DESCR: "NM-SE"
PID: NM-CUE   , VID: NA ,
sh software versions
Installed Packages:
- Core 1.1.2
- Auto Attendant 1.1.2
- Voice Mail 1.1.2
- Boot Loader 1.0.17 Installed Languages: - US English 1.1.2
According to the document
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel2_3/install/upg_boot.html#wpxref53388
After "cue-installer.2.3.1" is loaded i should get the prompt as given below
Welcome to Cisco Systems Service Engine Helper Software
Please select from the following
1       Install software
2       Reload module
(Type '?' at any time for help)
Choice: 1
but i don't see this prompt.Also interestingly I don't see this command
"software download clean pkg ..... " In fact "software" does not appear as an option under any
mode in CLI......
Quick help will be much appreciated!!!!
Thanks & Regards,
Hasan Jafri

Hello Paulo ,
Given below is what i see on the CLI
se-10-1-1-10> reload
Are you sure you want to reload?
Doing a reload will cause any unsaved configuration data to be lost.
Continue[y]? : y
se-10-1-1-10>
MONITOR SHUTDOWN...
EXITED: ${ROOT}/bin/probe exit status 0
EXITED: SQL_startup.sh exit status 0
EXITED: LDAP_startup.sh exit status 0
EXITED: HTTP_startup.sh exit status 0
MONITOR EXIT...
INIT: Remounting device 03:01 ... OK
Done.
Restarting system.
Initializing memory. Please wait. 256 MB SDRAM detected
BIOS Version: SM 02.00
BIOS Build date: 09/17/02
System Now Booting ...
Booting from flash..., please wait.
[BOOT-ASM]
7Found Intel 82371AB at 0x00000000 ROM address 0x00000000
Please enter '***' to change boot configuration: ***Probing...[EEPRO100]Found I    // I DO THIS AND GO INTO THE BOOT-LOADER
ntel EtherExpressPro100 at 0x00000000 ROM address 0x00000000
Found Intel EtherExpressPro100 at 0x00000000 ROM address 0x00000000
Ethernet addr: 00:14:1C:95:FC:A2
equalizer val: 16
ServicesEngine Bootloader Version : 1.0.17
ServicesEngine boot-loader> boot helper                                 // THEN I TYPE "boot helper"
Probing...[EEPRO100]Found Intel EtherExpressPro100 at 0x00000000 ROM address 0x
00000000
Found Intel EtherExpressPro100 at 0x00000000 ROM address 0x00000000
Ethernet addr: 00:14:1C:95:FC:A2
equalizer val: 16
Me: 10.1.1.10, Server: 10.1.1.55, Gateway: 10.1.1.11
Loading cue-installer.2.3.1                    //AFTER THIS STEP CUE RELOADS IT SELF
Initializing memory. Please wait. 256 MB SDRAM detected
BIOS Version: SM 02.00
BIOS Build date: 09/17/02
System Now Booting ...
Booting from flash..., please wait.
[BOOT-ASM]
7Found Intel 82371AB at 0x00000000 ROM address 0x00000000
Please enter '***' to change boot configuration: Filesystem type is reiserfs,
partition type 0x83
kf: a1 : (hd0,0)/bzImage root=/dev/hda1 ro plat=nm
kf: a2 : (hd0,0)/bzImage root=/dev/hda1 ro plat=nm
in grub_open: (hd0,0)/bzImage root=/dev/hda1 ro plat=nm
in grub_open1: /bzImage root=/dev/hda1 ro plat=nm
in grub_open2: /bzImage root=/dev/hda1 ro plat=nm
in grub_open3: /bzImage root=/dev/hda1 ro plat=nm 1
in grub_open: (hd0,0)/bzImage root=/dev/hda1 ro plat=nm
in grub_open1: /bzImage root=/dev/hda1 ro plat=nm
in grub_open2: /bzImage root=/dev/hda1 ro plat=nm
in grub_open3: /bzImage root=/dev/hda1 ro plat=nm 1
In verify_kernel_sig
Chksum: final image size: 809372
plat: 1
Debug: bl_sz: 115296
After: buf_len: 2048
After KEY_InitMem
reading key: 0
reading key: 1
reading key: 2
reading key: 3
reading key: 4
reading key: 5
After karr
After 2: buf_len: 2048
sig len : 172
in verifysignature_md5, MD5 hash generated now, str format:hexmd5:bfb41f99bd669
c4df612cb94f2e81764
Verifying signature now...
calling RSA decrypt now
mem ptr: 0 704 832 968 1040 1172 1184 1196 1208 1220 1228 1244 1268 1284 1300 1
316 1332 1344 1360 1384 1400 1664 1804 2080 2224 2364 2880 3396 3660 3924 4188
RSA decrypt returned:33
verifysignature_md5, Orig MD5 hash generated during encryption:bfb41f99bd669c4d
f612cb94f2e81764
Kernel signature verified successfully
In load_imagea1
In load_imagea2
Dbg ********* filemax/data_len/SECSIZ: 809372/2560/512
   [Linux-bzImage, setup=0xa00, size=0xc4d9c]
kernel_func: kt: 3
in boot func: kt: 3
Linux version 2.4.18 (bld_adm@bld-system) (gcc version 2.95.3 20010315 (release)
) #5 Sun Sep 19 22:25:25 PDT 2004
Platform: nm
setup.c: handling flash window at [15MB..16MB]
setup.c: handling kernel log buf at [245.5MB]
setup.c: handling trace buf at [246MB]
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0800 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000000f00000 (usable)
BIOS-e820: 0000000000f00000 - 0000000001000000 (reserved)
BIOS-e820: 0000000001000000 - 000000000f580000 (usable)
BIOS-e820: 000000000f580000 - 000000000f600000 (reserved)
BIOS-e820: 000000000f600000 - 0000000010000000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
On node 0 totalpages: 62848
zone(0): 4096 pages.
zone(1): 58752 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda1 ro plat=nm
Initializing CPU#0
Detected 498.673 MHz processor.
In serial_console_setup
Calibrating delay loop... 996.14 BogoMIPS
Memory: 244056k/251392k available (1027k kernel code, 5924k reserved, 661k data,
84k init, 0k highmem)
kdb version 2.3 by Scott Lurndal, Keith Owens. Copyright SGI, All Rights Reserve
d
in atrace_init
log_head: h: 0, t: 5717961, l: 0, w: 0, s: 10484672
Using existing trace log
log_head: h: 0, t: 5717961, l: 0, w: 0, s: 10484672
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xeab9c, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
devfs: v1.10 (20020120) Richard Gooch ([email protected])
devfs: devfs_debug: 0x0
devfs: boot_options: 0x1
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Cisco ContentEngine Flash Driver Version 0.02
block: 128 slots per queue, batch=32
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
hda: C/H/S=50127/232/176 from BIOS ignored
hdb: C/H/S=0/0/0 from BIOS ignored
hda: IC25N020ATMR04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 39070080 sectors (20004 MB) w/1740KiB Cache, CHS=38760/16/63, UDMA(33)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1
device capacity not supported
Flash capacity == 39070080
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.
html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@sa
w.sw.com.sg> and others
eth0: PCI device 8086:1229, 00:14:1C:95:FC:A1, IRQ 9.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 668081-002, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Receiver lock-up workaround activated.
eth1: PCI device 8086:1229, 00:14:1C:95:FC:A2, IRQ 10.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 668081-002, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
Receiver lock-up workaround activated.
IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
reiserfs: checking transaction log (device 03:01) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Init drive control
Freeing unused kernel memory: 84k freed
INIT: version 2.84 booting
Started device management daemon v1.3.25 for /dev
reiser root fs ...
Reiserfs super block in block 16 on 0x301 of format 3.6 with standard journal
Blocks (total/free): 4883752/4804594 by 4096 bytes
Filesystem is cleanly umounted
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
FILESYSTEM CLEAN
Remounting the root filesystem read-write...
kernel.sem = 16384 32000 32 128
                Welcome to Cisco Service Engine
Sun Aug 14 21:49:14 PDT 2005
WARNING: Found files describing previous failures...
         Saving them in /var/cores.prev
********** rc.aesop ****************
WARNING: Found files describing previous failures...
         Saving them in /var/javacores
==> eth1 exists, we must be running on a Network Module
==> eth1 exists, we must be running on a Network Module
Router communications servers initializing...complete.
IOS IP Address Registration complete.
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window irtt Iface
10.1.1.0      *               255.255.255.0   U        40 0          0 eth1
127.0.0.0       *               255.0.0.0       U        40 0          0 lo
default         142.1.66.254    0.0.0.0         UG       40 0          0 eth1
Reading Manifest...done.
Reading License ...done.
ModuleType = nm
INIT: Entering runlevel: 2
********** rc.post_install ****************
INIT: Switching to runlevel: 4
INIT: Sending processes the TERM signal
STARTED: cli_server.sh
STARTED: ntp_startup.sh
STARTED: LDAP_startup.sh
STARTED: superthread_startup.sh
STARTED: SQL_startup.sh
STARTED: HTTP_startup.sh
STARTED: ${ROOT}/usr/wfavvid/run
STARTED: ${ROOT}/bin/probe
waiting 132 ...
SYSTEM ONLINE
se-10-1-1-10>
According to the document when the CUE reloads it should give me the option to install the software or reload ?
Am i doing the right way ??
Regards,
Hasan Jafi

HT1338 How do I retrieve my Mac OS password? Without that I am not able to upgrade from OS x 10.6.8 to higher versionsto

I have bought an iphone 5 and signed up for icloud service to sync my imac. But minimum requirement for icloud is 10.7.5 and my imac is OS X10.6.8. Also the itunes version in my imac is old so cable sync with iphone 5 not working.
I am not able to retrive my Mac OS password, without that I cant upgrade softwares in my imac. Looking for some advice.

Welcome to Apple Support Communities
If you have the Snow Leopard DVD, read "Resetting your original administrator account password" > http://support.apple.com/kb/HT1274
Then, check that your computer is supported > http://www.apple.com/osx/specs. If it's supported, open the App Store and purchase Mountain Lion. Make a backup of your files and check that your applications are compatible > http://www.roaringapps.com
When the download finishes, the OS X Mountain Lion installer will appear, so follow the steps. After upgrading, open System Preferences > iCloud, and set it up, so you will be able to use iCloud on the computer

Upgrading from JSF first beta version to version 1.2

Anyone knows where to get full list of all release changes between first beta version and version 1.2? Even better if anyone has done such an upgrade before. Please advise time frame and points to note. Many thanks!

This is exactly the same problem I have had, despite down loading several times (just in case), and even using a different machine (again, just in case). Needless to say, the query I posted on the Apple Logic help site has not been responded to!
Fortunately, Logic Express still works but it would be nice to be running the latest (functioning) version

How do I upgrade from iOS 4.3 version

I recently purchased an I phone 3 to use as basically an Ipod. I want to upgrade the iOS version to 5 so I can download some more apps. How do I go about doing that? When I plug it in iTunes tells me I have the latest possible version, I know this is not true. I have another Iphone 3 that is running iOS 5.

An iPhone 3G can't be updated past 4.2.1. An iPhone 3GS can be updated to 6.1.6.
(118820)

Not able to upgrade to 3.1.3 from 1.1.5 Ipod Touch 1g

Hey there,
I am not able to upgrade my iOS from 1.1.5 to 3.1.3. I did download the upgrade and followed all the instructions but, after itunes extracts the files, it says "Unknown error" and the upgradation is stopped and I was forced to restore my Ipod Touch to 1.1.5 Again.
Any ideas on what to do?

I would try deleting the update file and redownloading it.

After upgrading from ios 7 I was unable to activate my iphone 5

after recent upgrading from ios 7,Iwas unable unlock the sim card as well as not been able to activate my phone

What is the exact wording of the error message?
Has the iPhone been jailbroken or modified to work
with other than the original wireless provider?

IPhone Home Button not working after upgrade to ios 5.1.1

Hey everyone,
I'm pretty sure this is a software failure due to the symtoms the iPhone is showing;
0 - the home button does not work at all when the phone is turned on and running ios 5.1.1, well it used to work okay when i had ios 5.0.1, I upgraded to 5.1.0 and started working randomly, upgraded to 5.1.1 to see if it was fixed with no luck at all.
1 - When locked the screen does sometime light up, like when you press the home button and don't slide the unlock button. but it does not exit apps anytime, I mean it doesn't act like it's pressing the home button randomly but only when the phone is locked.
2- The button does work perfectly when iOS is not running: I can get in and get out of recovery and dfu mode at will, that wouldn't be possible if the button were broke.
3- what else? Oh yea, not really a symtom: Tried the 'home button calibration' several times.
4 - It's not filthy, since I really cleaned it thoroughly with a powerful tiny nozed air blower I got and gave a rubbing alcohol treatment too.
5 - when I shut the phone down it instantly turns back on, I can interrupt the turning on for turning the phone into dfu mode (i'm sure It's in DFU mode because the tinyumbrella log monitor tells me)
I'm now using the 'soft' home button that goes in the accesibility options, but hey, I didn't pay a ton of money for a phone that the same Apple is gonna break down.
It's out of warranty and I don't have apple stores where I live.
I'd downgrade to 5.0.1 in a snap if I could but I'm not into jailbreaking, so the shsh blob thingie is not a possibility.
Any apple dev around that can give me a workaround?
thanks a lot in advance
Added more info ~

I had the same problem with Home button not responding after upgrading from iOS 5.1 to iOS 5.1.1 on an iPhone4.   I solved it but not sure exactly what fixed it.   Here is what I did.
1. Took it local Apple store Genius appointment.   They used a special tool and took some lint out of the connector opening.   The Home button started working.   They said even though the phone was out of warranty, I could buy a new replacement one without a contract for $150.
2.   The Home button stopped working when I got home.   I got some compressed air in a can and blew the air through the connector to try and clean out more dust.   I now keep the phone with the connector opening facing down in my pocket.   I also struck the phone downward on my hand or other soft surface to force as much dust out as possible.
3. The Home button still was intermittent. I then tried to do a hard reset by holding the power on key and the Home button simultaneously for about 10 seconds. This doesn't work if the Home button doesn't respond.
4. I connected the iphone to Itunes via the USB to sync the phone. While connected, I did a Hard Reset by Holding the Power button and Home button simultaneously. I noticed the Home button responded better when connected to ITUNES via the USB.
5. I did a backup of the iphone4 by highlighting the iphone 4 while connected to ITunes and right mouse click and selecting BACKUP.    I was prepared to reset my phone4 in iTUNES and restore it from the backup.
The phone worked consistently before I had to do this.
6. As a last resort which I didn't need to do, I was going to copy all my settings for the iphone by selecting the phone in iTUNES and looking at all the sync settings.   I would then have restored the iphone to original factory settings and then sync the phone using the copied settings. This would have made sure that the backup didn't include the bug.
Fortunately, I didn't have to do step 5 and 6.   Things started working after Step 4. So I don't really know if it was the iOS 5.1.1 upgrade or pure coincidence that the Home button stopped working immediately after the upgrade.

I am not able to upgrade my iphone 4s

my iphone 4s is currently working on 7.0.4...i want to upgrade it to 7.1.1 in itunes which is the latest update availble..it is showing an error with number 3004...checked online and tried to solve it but no use..please help..i m not able to upgrade my ios..i have new version of itunes installed and also checked the method of host files even..but of no use..please help..

Hello sandeep.vietla,
Thanks for using Apple Support Communities.
I understand that you've followed our article linked below and have already followed the instructions for the host file. How about the TCP/IP filtering, firewall, or security software section as well? Have you also tried this on another computer or network? Please follow completely through the article and let me know what happens.
Error 3194, Error 17, or "This device isn't eligible for the requested build"
http://support.apple.com/kb/ts4451
Take care,
Alex H.

Auto brightness does not work after upgrade from iOS5 to iOS6 on my iPod touch. Is this intended by Apple, or is it a bug?

I attempted to ask this question, yesterday. However, I am not used to typing with my thumbs, yet, and messed it up some. So, I will give this another try. Auto brightness does not work after upgrade from iOS 5 to iOS 6 on my iPod touch. Is this intended by Apple, or is it a bug?

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
iOS 6 changed how that feature works.

Upgrading from 7.5 to version 8: Web and Email Collaboration problem

Hi All;
To be able to upgrade from 7.5 to version 8.x then the web and email collaboration should be removed and this is the hard thing !
To go through all the web collaboration objects and remove it one after one is something not possible, special when I am trying to remove for example an agent who is belonging to the skill group and it gives us: you do not have a permission !!
So I decided to do a clean at the database level (specially that the problem appears when running EDMT), I need a help to know the following to be able to do this cleaning:
1) Should I do this in the side_A database or on the AWDB?
2) If I removed the Application Instance that is related to the Collaboration, could this resolve the problem to do the upgrade from version 7.5 to 8.x? Or I have to delete all the values related to the Collaboration (for example, the media class, the used skill group and the used agents, ... etc)?
Looking to a help PLZ.
Regards
Bilal

Hi All;
To be able to upgrade from 7.5 to version 8.x then the web and email collaboration should be removed and this is the hard thing !
To go through all the web collaboration objects and remove it one after one is something not possible, special when I am trying to remove for example an agent who is belonging to the skill group and it gives us: you do not have a permission !!
So I decided to do a clean at the database level (specially that the problem appears when running EDMT), I need a help to know the following to be able to do this cleaning:
1) Should I do this in the side_A database or on the AWDB?
2) If I removed the Application Instance that is related to the Collaboration, could this resolve the problem to do the upgrade from version 7.5 to 8.x? Or I have to delete all the values related to the Collaboration (for example, the media class, the used skill group and the used agents, ... etc)?
Looking to a help PLZ.
Regards
Bilal

HT5654 please I need help, I have not been able to upgrade my iOS from 6.1.2 to 6.1.3?

please I need help, I have not been able to upgrade my iOS from 6.1.2 to 6.1.3?

Hello mpacology
The article below will provide assistance with upgrade your iPhone operating system. You can do this through iTunes or through the Software Update section in Settings >General > Software Update
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HeLLO I AM USING AN IPHONE 5 From Last few days I DON'T KNOW WHAT HAPEND TO MY SET ITS DISTURBING ME A LOT DON'T KNOW WHY BUT I AM NOT ABLE TO UPGRADE ANY APPS BECAUSE WHEN I AM TRYING TO UPGRADE OR DOWNLOAD ANY APP THROUGH WIFI ND 3G BOTH AFTER SOMETIME

HeLLO I AM USING AN IPHONE 5 From Last few days I DON'T KNOW WHAT HAPEND TO MY SET ITS DISTURBING ME A LOT DON'T KNOW WHY BUT I AM NOT ABLE TO UPGRADE ANY APPS BECAUSE WHEN I AM TRYING TO UPGRADE OR DOWNLOAD ANY APP THROUGH WIFI ND 3G BOTH AFTER SOMETIMES IT STOPS DOWNLOADING AND SHows THAT "UNABLE TO DOWNLOAD THIS APP" IT'S SHOWING THIS MESSAGE IN EVERY APP AND ALSO AT ITS DISTURBING ME AT THE TIME OF WATCHING ANY VIDEOS TOO. BECAUSE WHEN I AM TRYING TO WATCH ANY VIDEO IN YOUTUBE IT'S DISTURBING VIDEOS ARE NOT PLAYING ND SOUNDS ARE NOT COMING PROPERLY ND THE IMAGE QUALITY ALSO BECOMES POOR AND THE VIDEO STOPS AFTER SOME TIMES THIS PROBLEM IS HAPPENING AT ALL THE VIDEO ND IT'S HARASSING A LOT. THE SAME PROBLEM IS ALSO HAPPENING TO MY BROTHER'S PHONE TOO.. REQUEST TO APPLE PLEASE ANALYSE AND FIXED THE PROBLEM AS SOON AS POSSIBLE OR ELSE MAYB I NEED TO STOP USING APPLE PRODUCTS. CAUSE IT'S HARASSING MY DAILY LIFE A LOT....

These are user to user forums. You ARE NOT addressing Apple by posting here.
Also, why are you YELLING at us?? Stop using ALL CAPS.
What steps have you done to try and fix the problem?

I want to upgrade from iOS 6 to iOS 7. I do not want 8. Is this possible?

I want to upgrade from iOS 6 to iOS 7. I do not want 8. Is this possible?

swbookeesue wrote:
I want to upgrade from iOS 6 to iOS 7. I do not want 8. Is this possible?
What prevented you from updating to iOS 7 for the previous 12 months?

Regards, since I upgrade to IOS 7 I can not open Itune Store from my Iphone 5. which is the way to solve this problem?

Regards, since I upgrade to IOS 7 I can not open Itune Store from my Iphone 5.
which is the way to solve this problem?

You've tried logging out of your account by tapping on your id in Settings > iTunes & App Store and logging back in, and/or tried a soft-reset of the phone ?

I am not able to upgrade from ios 7 beta version to the Gold master version

Similar Messages

Maybe you are looking for