I am not allowed to submit a question in my iMac.

I several times tried to put a problem on my iMac.
It always says I am not allowed.
My login is done.
Thanks.
Hans

System Preferences/Security & Privacy/General - un-check the box for password.
Try adjusting the Energy Saver just a little and see if the computer stays awake longer.

Similar Messages

My new hard drive does not allow me to load programs on my IMac. It doesn't recognize my administrator password. How can I correct it?

my new hard drive does not allow me to load programs on my IMac. It doesn't recognize my administrator password. How can I correct it?

Wrong forums. Try http://answers.microsoft.com/en-us/mac

I am not allowed to answer Security questions so i can not enter Apple store

When i try to access Apple store they informed me i have to answer 3 questions. I click continue but they asked me to complete a window with my pass again and again without redirecting me to the security step and without allowing me to answer the questions

 Account Security Team (AST) 
Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team.

Submit all questions at the AT THE END OF THE TEST - NOT each question separately

Helo.
I find some problem. I think captivate is very useful tool
and user friendly but i have one urgent problem: i would like in my
course all questions have 'back' and ' forward' (eventualy this may
be 'skip') button and the approve/resume/submit button was at the
end of the course and it would take affect to all questions (i mean
- then all questions would be submitted and student would not have
to submit each question separately). IS IT POSSIBLE TO MAKE IT IN
ANY WAY ???
I thought that i could remove submit button from question
slides and place it with the last question but i can't remove it
from slides.
Anyway i would be glad if somone would help me because i
cnannot find any solution of this problem in captivate's help.
Thanks in advance for all ideas and proposed solutions
Regards: Simon

Hi templaaar
I am not the world's greatest on Captivate, but my
understanding is that each question has to be submitted seperately
and I do not know of any way in which to submit all the answers at
once.
Sorry mate
Andrew

JBoss, JSF exception: #{..} is not allowed in template text

I've created a simple JSF login application using MyEclipse IDE. I deployed the application on JBoss 4.2.1. At first it failed to deploy. After some searching, I followed the instructions at:
http://forum.java.sun.com/thread.jspa?threadID=5176676&messageID=9923048
I deleted the JSF related jar files in the JSF application's WEB-INF/lib folder. The application was then only successfully deployed.
Question #1: Is there a conflict with the jar files, which prevents the application from being deployed. Does someone know the right way to solve this issue
Now when I access my page in the browser at the URL:
http://localhost:8080/JSF_tutorial/userLogin.faces
I see the following exception:
org.apache.jasper.JasperException: /userLogin.jsp(32,29) #{..} is not allowed in template text
     org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
     org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
     org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:102)
     org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:711)
     org.apache.jasper.compiler.Node$ELExpression.accept(Node.java:935)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
     org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2392)
     org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
     org.apache.jasper.compiler.Validator.validate(Validator.java:1737)
     org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:178)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:311)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:408)
     com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:442)
     com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:115)
     com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
     com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
     org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
Question #2: How do I get rid of the above exception?
thanks,

tsc wrote:
I've created a simple JSF login application using MyEclipse IDE. I deployed the application on JBoss 4.2.1. At first it failed to deploy. After some searching, I followed the instructions at:
http://forum.java.sun.com/thread.jspa?threadID=5176676&messageID=9923048
I deleted the JSF related jar files in the JSF application's WEB-INF/lib folder. The application was then only successfully deployed.
Question #1: Is there a conflict with the jar files, which prevents the application from being deployed. Does someone know the right way to solve this issue
I'm not entirely sure what you are asking here; do you want to be able to include an implementation of JSF with your WAR file? In any case, I suspect your question is answered on the JBoss Wiki pages for JSF.
Now when I access my page in the browser at the URL:
http://localhost:8080/JSF_tutorial/userLogin.faces
I see the following exception:
org.apache.jasper.JasperException: /userLogin.jsp(32,29) #{..} is not allowed in template text
Question #2: How do I get rid of the above exception?
My best guess is that you are somehow configured to use JSP 1.x instead of JSP 2.1 (see http://www.google.com/codesearch?q=jsp.error.el.template.deferred). Check your tag library tld versions.

Submit PDF Form by Email (does not allow connection)

It's been sometime since I have created a PDF which included a "Submit by Email" button. I opened the original form and changed the email addresses, saved it, then opened it in Reader. Whenever I try to submit it by email a "Security Block" window pops up stating "Acrobat does not allow connection to:" I have tried to call and pay for support but get the run around. I've searched the web and only found where I need to "Extend the Rights to Reader" which I did to no avail. I've even rebuilt the form from scratch...nothing.
Any help would be much appreciated!
Thanks....

I created the form first in Microsoft Word, then "printed" it to create a PDF. I then use Acrobat to create a bunch of fields, and set the form for distribution.
When the user completes the form in Acrobat, and clicks on the "Submit" button, an email is created with the form as an attachment, and the body of the message is this:
Instructions to add this form to a responses file:
1. Double-click the attachment.
2. Acrobat will prompt you to select a responses file.
Those are the instructions I was referring to. The question is, is there any way to change or eliminate those instructions?

I am trying to ask a question about iPhones, but it will not let me post - I get a message similar to this - you are not allowed to change the content. Any help on this matter?

I am trying to ask the following question: Just updated my iPhone5 to V 7.1.2 and can no longer print to my MFC 7860W from this phone. I researched this issue on this forum and found answers from last October/November..... Wary of downloading anything that was posted that long ago. Wondering if there is anyway around this issue, with more recent information? I was able to use this printer in the past by using Brother's iPrint App.
Thanks!!
But when I hit post, I get an error message at the top - "you are not allowed to change this content" Can anyone help me?

I am assuming you got that message when attempting to post an old thread. The old post is probably locked/archived.
FYI, posting on old threads usually yields no responses at all.
I have requested that this post be moved to the iPhone forum where you might get assistance.
Barry

TS1440 I followed all of the directions after seeing that my laptop flashed the folder with the question mark. But when I went to disk utility to repair/ verify issues w/ start up disk it would not allow me to.button to repair/verify is there but cant be

I followed all of the directions after seeing that my laptop flashed the folder with the question mark. But when I went to disk utility to repair/ verify issues w/ start up disk it would not allow me to. The buttons to repair and modify we're there but they were grey and couldn't be pressed.

Were you trying to repair the disk you were booted from? You can't do that - you need to boot from your install disk, and choose 'Disk Utility' from the 'install' menu.

HT202274 Apple ID has my old email address. It will not allow me to change the address and will not accept my password or ID questions. I recently upgraded to OSX Yosemite 10.10.1. I also have an Apple ID that works with iTunes and would like to keep i

Apple ID has my old email address. It will not allow me to change the address and will not accept my password or ID questions. I recently upgraded to OSX Yosemite 10.10.1. I also have an Apple ID that works with iTunes and would like to keep it as my primary.

To change the iCloud ID on your devices you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted (if using iOS 7), then sign back in with your current ID.
If you don't know the password for your old ID, or if it isn't accepted, you will have to temporarily recreate it in order to delete the existing account. To do this, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Trying to post a question and receiving: You are not allowed to create or update this content

I am a newbie and am trying to post a question to the support communities and received this reply:"You are not allowed to create or update this content"
My question:
Help! Not all my incoming mail messages are going to my home computer account. Some are derailed and end up in my inbox on my iphone only. My husband is waiting for a message to come through on the home computer and sometimes they end up on my iphone5 accounts. Yikes! He is not happy. Some messages come to my pc email and some only to my phone. But then, some come to both as they should. I need all mail to arrive at both home and on my iphone. I would so appreciate any help or advice given. Thank you! Iphone 5c IOS 7.1.2

I'm not sure, but you might try this (instructions are from my 5s running iOS 7.1.2):
On your iPhone, go to Settings -> Mail, Contacts, Calendars
Find the account you're having the problem with
Touch the arrow to the right of it, which will bring up a screen that has the account name, Mail and Notes
Touch the account name. This brings up a settings screen for only that account.
Go down to Advanced and touch that
See what it says under Deleted Messages. If Remove is set to something really short, your iPhone might be deleting the messages before they have a chance to download onto another device.

Ipod touch prompting me for security information required then asking me to fill in 3 questions and answers but will bump me out of it and will not allow me to download app, help

Jusat the other day i started getting prompted for Security Information required when trying to download apps. on my Ipodtouvh 4Gen. Typically when I download an app. I get asked for my apple ID and then it will allow the download. This new prompt pops up after it looks like the app is downloading. It gives me the option to cancel which will not allow the download or I have to select Security information. It then brings me to a screen where it asked for three questions but as I put the questions and answers in it bumps me back to the screen of the app I was trying to doenload. Any clues???

this has recently been happening to other people. We think that it is a fault at apples end of the line. However in the cases i have seen the problem fixes itself and it goes back to normal after a day or 2 you just have to wait!

When trying to make purchase I am asked to improve apple security by setting up 3 questions. I have tried many times with out success. Apple always returns an error without identifying what the error is. Will not allow me to advance without setting up

Apple is requiring the establishment of 3 security question (increase online security), but coninuously gives an error without identifying the error. I am not allow to proceed or bypass and cannot use any apple store features.

Exactly when does this error occur? What is the exact wording?

I just bought Adobe Acorbat DC, but it want old series No. or not allow me to use. the question is I have no that kind of No. the old one is a trial, even follow "find your series No" solution, my account & order history was blank, please tell me what sho

I just bought Adobe Acorbat DC, but it want old series No. or not allow me to use. the question is I have no that kind of No. the old one is a trial, even follow "find your series No" solution, my account & order history was blank, please tell me what should I do now@ !

this page shows the 'full' version (more expense ~$500 u.s.) and the 'upgrade' version (less expensive ~$200 u.s.), Plans and pricing | Adobe Acrobat DC
if you bought the less expensive one you must own a qualifying (acrobat X or acrobat XI) version

ITunes Store would not allow me to purchase an album. The store said that I needed to answer a security question. I had not sent answers to ant security questions previous

I have been using iTunes for almost two years. I went to purchase an album and the store would not allow me to purchase until I had answered security questions. I had never given answered to any questions previously. So i didn't know the correct answer. What do I need to do?

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support or Apple to get them reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or, if it's available in your country, you could change to 2-step verification : http://support.apple.com/kb/HT5570

HT1933 I have reset my password. It now wants me to answer security questions, but will not allow me to type answers in...I want to buy music..

I am wanting to buy music from my account..I have had to change my password,which I did. Now it wants me to answer security questions. When I pick the question,it will not allow to type in my answers...I can't even do the rescue message..this is SO frustrating

Read the HT5312 page that you posted from, it has instructions for how to reset them i.e. if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 half-way down that page should give you a reset link.
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

I am not allowed to submit a question in my iMac.

Similar Messages

Maybe you are looking for