I am not getting any sound on my imac...i downloaded some programs
The sound in my imac does not work.
Hello
if your menu bare show a liitel spkear icon try move up and down cursor for sound volume
HTH
Pierre
Similar Messages
-
For some reason the sound on my Imac stopped. I checked all volume controls and they are up and still no sound. I have restarted the Imac and still nothing.
Any suggestions?Can happen occasionally for reasons unknown.
An SMC reset usuall cures it.
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964 and
http://support.apple.com/kb/HT1237?viewlocale=en_US
Resetting your Mac's PRAM and NVRAM:
http://support.apple.com/kb/ht1379 -
I am not getting any sound input on my microphone. There is no microphone input on my new macbook pro, so I am using my old one. Is this a problem with the new operating system? Did they simply remove any microphone software?
Check System Preferences > Sound > Output
Make sure the correct device is selected. -
Im not getting any sound when i select a track and put it in the arrange area
Im new to pro logic,, when i select a track and put it in the arrange area,, im not getting any sound when it plays.. I can hear it play in the list of samples, but not when its in the arrange area,,, help meeeeee
Are you putting the file on an instrument channel rather than an audio channel? That's one possibility. The track could be muted is another.
-
not getting any sound when connecting my hdmi on the tv only on the laptop, no option in sound settings for altering hdmi
Solution may be found if you search in the "More Like This" section over in the right column.
-
hi i have a x-fi sound card that i just bought and when i do channel test thing my left speaker is lower than my right speaker... and when i play anything im not getting any sound from either speakers... so when i test my speakers i can hear it say left channel right channel but the left channel is so much lower than my right channel can anybody help me plz ty
edit: when i do the channel cheak thing it sounds like they r trying to make my left speaker sound like its in the background makeing it softer than my right speakerMessage Edited by seijyennite on 07-25-2006 03:55 PMi also reilized that im not getting any sound on my desktop or messengers i cheaked if i have sound enabled and they r... i uninstalled a codec awhile ago mayb that had something to do with it...
-
I am not getting any sound from my laptop. I have a Pavilion dv7 with beats audio.
I am not getting any sound from my laptop.
Try a hard reset.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
`````````````````````````````
If still no sound,
Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & install the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
I am not getting any sound with my apps, only itunes, any thoughts?
I am not getting any sound with my apps, only itunes, any thoughts?
Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085 -
I am not getting any sound on my ipod touch
I am not getting any sound at all on my ipod. I am not sure what happened to it. I tried a game feature and there is no sound and it does not seem that my ipod is on mute. I tried Pandora which I usually listen to everyday and there is no sound. What do I do?
I would first try doing a Restart
http://support.apple.com/kb/ht1430
If that does not help, try a different set of headphones to rule out bad headphones as the cause. -
Is ther a setting that i am missing why I am not getting any sound from my Laptop
I have an HP with corei5 and windows 7 home. The subject describes my problem. No sound.
-
I am not getting any sound on my iPad while using key board or in any games
I am not getting any sound while using key board , in games have tried all the option as suggested by other members like rotation / mute switch setting , resetting the iPad etc . Any other way to solve this issue
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
After ios5 update, I am not getting any sound when I play music.
After ios5 update, I am not getting any sound when I play music (iphone speakers or headphones). I get sound from games, previewing songs in iTunes, etc. Any idea why? I've resynced and shut down my phone and that didnt help.
iPhone 4Beer,
is that when you want to play music over the air (airplay) like BT headset or something?
because i am facing the below issue in my car.
the phone minimizes the volume of airplay and the ringing to 0 when connecting to a device (BT headset or car kit)
upon disconnecting, the ringing tone remains 0 and i miss all or most of my calls. -
Not getting any sound trying to record external synth in GB
I'm trying to record my Alesis Andromeda synth into GB but not getting any sound. I am using an Emagic AMT-8 as a midi i/f & a MOTU 828mkII as a soundcard. Both are set up correctly in core midi/audio as I normally use Logic Pro 7 with no problems.
In GB I add a new real instrument track & select the relevant input to corespond to my 828mkII, I then turn monitor 'on' but I am not getting any sound back to the 828mkII. Preferences shows that this soundcard is recognised.
I can play AU instruments or GB instruments from the Andromeda so the midi connection is good.
Any ideas? cheers....The Andromeda is plugged into line inputs 1&2 of the 828mkII (which is inputs 3&4 as the mic inputs are 1&2), The outputs of the 828mkII are plugged into my Genelec monitors. I know the set up works as I use Logic all the time, just can't get any sound in GB.
thanks. -
We just set up our Apple TV but not getting any sound. We have the Boss sound system. Support could not help us they directed us to call a Boss.
Do you mean Bose sound system? What model?
-
I cannot get any sound from my imac
Hi
I cannot get any sound from my imac either itunes or alert sounds I've checked that everything is turned up and not muted
thanks in advanceIf a simple reboot doesn't fix it, try resetting the SMU.
Depending on which iMac you have, one of these links will explain how.
Resetting the SMU on a G5 iMac:
http://support.apple.com/kb/HT1767
and on a Power Mac G5 :
http://support.apple.com/kb/HT1436
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964
Resetting your Mac's PRAM and NVRAM:
http://support.apple.com/kb/ht1379
Maybe you are looking for
-
Who knows how to read the Chinese Characters from JDBC?
I wrote two files. One is a jsp file, the other is java file. But in the jsp file it cannot print the Chinese characters, only can print the English characters. I have changed the Character Coding of the browser, but it has no effects. However, the j
-
Server proxy implementation with synchronous inbound interface
<b>Hi all,</b> How we can implement a server proxy with synchronous inbound interface.If any example weblog please send the link. <b>thanks, Kishan.</b>
-
Where has to be defined the SLD? PI/XI or Solution Manager?
Hello, We have a PI production system, already configured and working. Now we are implementing the solution manager system. In both cases we only have productive systems. In which one should we define the SLD? Thanks and kind regards, Ana
-
Deploying exploded archives?
Hi, I am doing J2EE/Struts/EJB Development on Weblogic 8.1. Have an EAR file with WAR file and bunch of EJB JARs inside that EAR. I need to do a lot of changes and additions to the GUI, which is mostly JSPs ins
-
Help with stop sign on screen - please!
My hard drive has packed up and I have a new one which I have formatted on another G5. When I start up now I get a folder with a flashing question mark in it. If I insert my copy of panther then the disk spins and the screen goes to the apple grey sc