I am not getting notifications when I gets texts! What do I do?

When ever somebody sends me a text, my Ipod touch does not alert me. I also have all of my notifications on!! Please help!

What's the end user going to do with the File? If it's for screen use - Internet, Web Galleries, then 72 dpi is fine. If printing, then 300 dpi is often quoted as a rule of thumb.
In the Export dialogue you can create your own presets or edit the existing one. If you edit you'll see the quality slider. Higher quality means less jpeg compression.
Regards
TD

Similar Messages

  • Good afternoon. My iphone 4s used in Amerke another user. When you upgrade requests id and password. I can not get it, what to do?

    Good afternoon. My iphone 4s used in Amerke another user. When you upgrade requests id and password. I can not get it, what to do?

    As the previous owner of the phone or set up your own id and passwords.
    You should have perhaps thought about all of these things before buying the phone.

  • HT201269 I recently switched from 4S to Galaxy S4. I am not getting texts from iphone senders. When the message is sent it goes as a imessage. How do I fix this??

    I recently switched from 4S to Galaxy S4. I am not getting texts from iphone senders. When the message is sent it goes as a imessage. How do I fix this??

    Turn off iMessage on the iPhone as should have been done prior to switching devices.
    Settings > Messages > iMessage > OFF

  • I have 2nd gen. Ipod shuffle I restored it and now when i am trying to sync it, it is showing that some files are missing and it is not getting sync what should i do???

    I have 2nd gen. Ipod shuffle I restored it and now when i am trying to sync it, it is showing that some files are missing and it is not getting sync what should i do???

    Master reset...? Your device was jailbroken prior to you purchasing the device. The only symbol you should see on reboot is an Apple symbol. Download redsnow... google it! Download the latest version and your IPSW (ipod restore firmware) it has to be the correct version. And the "just boot tethered" should fix your device.
    But that's only if you didnt back the device up. If you don't care about any of the data on the ipod then you can simply open itunes navigate to the device and click the restore button. This will restore the ipod firmware and install a fresh copy. Good luck let me know if you have any problems.

  • Can not get Text-to-Speech to work

    I can not get Text-to-Speech to work. In "Settings", I can go into "Voice input & output", then to "Voice Output; Text-to-speech settings" and then to "Install voice data; Install the voice data required for speech synthesis" but it is "grayed out". I have downloaded Pico TTS several times and I have soft-reset and hard-reset the device several times. Still no text-to-speech
    Any thoughts on what I can do to get text to speech to work?

    posted11 wrote:
    Odd.... I tried both Vlingo and Handcent and neither of those did Text to speech either. Very odd. I am using same Bluetooth headset that worked on my other HTC device.
    Any other thoughts?
    Did you activate InCar in Vlingo?  I just checked this and it works for me.  Once you activate InCar, you should hear "Vlingo InCar".
    If Vlingo InCar doesn't work for you, have you considered getting another Bluetooth headset that has the ability to read texts to you, like the Blueant Q2?

  • I tried to restore from 4.2.1 to 4.3.3 through iTunes my iphone4 was on state after restore it gave error 3194 and my phone got black screen its not getting on what to do to turn on it

    I tried to restore from 4.2.1 to 4.3.3 through iTunes my iphone4 was on state after restore it gave error 3194 and my phone got black screen its not getting on what to do to turn on it

    http://support.apple.com/kb/TS3694#error3194

  • Not getting texts for infoobject 0CPR_STAT1 (cProject- System Status)

    Hi All,
    We are not getting texts for infoobject 0CPR_STAT1 (cProject->System Status), 0CPR_STAT2, 0CPR_STAT3. Even in source system r/3 there are no records and our function team doesn't  no how to get the records in that data source.
    DATA SOURCE NAME 0DPR_STSYS1_TEXT, 0DPR_STSYS2_TEXT, 0DPR_STSYS3_TEXT
    Can anyone suggest.
    Thanking you in anticipation.
    Regards
    Vandana

    Please check these links for the table names:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/ea/1847ff9624314e9bc7601b890b662a/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/49/c71c047b24014aac52785bf42aee83/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/b8/5cec634da16f4da2861aeb9e6f966e/frameset.htm
    Hope this helps...

  • Switched from iPhone 5 to Galaxy Note 3 and not getting texts

    switched from iPhone 5 to Galaxy Note 3 and not getting texts
    Turned off I message. Now what?

    Do not expect ANY help from Apple.
    I switched to a Samsung Galaxy Note 3 and have been gettig the run around for the last FOUR weeks...the tech I spoke with only returned one of my many phone calls after our initial conversation (in which she told me she reset the computer and I should be all set in 48 hours) to say it should clear itself up, there is nothing she can do to help.

  • The names of my contacts are not showing up when I receive text messages

    The names of my contacts are not showing up when I receive text messages, only the number is showing up. How can I fix this?

    This is a HUGE iOS bug.. Following a tip from another poster, I was able to fix the issue (temporarily).
    This worked for me on Verizon.
    I dialed *228 on my Verizon phone. I pressed "1" to activate it over the air. I then went into task manager and killed all the running apps.. Waited a few minutes.
    The next text I got displayed the number correctly!.. Until I rebooted, that is.
    PLEASE, call Apple and speak with a senior engineer on this. They can't fix it if they don't know it's a problem! (800) MY-IPHONE

  • My i pad 2 will not light up when its switched on, what is wrong with it?

    my i pad 2 will not light up when its switched on, what is wrong with it?

    Try a reset:
    1. Hold the Sleep and Home button down (together) for about 10 seconds
    2. Until you see the Apple logo (very important)

  • Empathy not displaying notifications when contacts sign on

    I have recently decided to give Gnome 3 a try.  I have run into an issue with notifications from Empathy.  I receive popup and audio notifications when a contact sends me a message, and I am getting audio notifications when contacts sign in; however, I do not receive any sort of pop up notification when this occurs.  I have checked the boxes for notifications-contact-signin and notifications-enabled under org.gnome.Empathy.notifications in dconf Editor.  In searching for a solution to this problem, I found references to a "Notifications" tab under Empathy's preferences, but I assume that has been removed from the newer versions, as I do not have that tab.
    Have sign in notifications been removed from Empathy, or have I misconfigured/neglected to install something?
    Please let me know if there are any specific logs that would be of assistance.
    Thank you

    Yes, I have installed Telepathy-(farstream, gabble, glib, haze, idle, logger, mission-control, rakia, salut).
    I have also installed libnotify.

  • Ipad not getting ON, what to do ?

    I bought Apple Ipad from India last year on 1st November 2012. Now I am in Pittsburgh, PA 15213 and suddenly my Ipad is not getting ON, last night it was working fine, but now its not getting even ON though i Put on charging for 2-3 hours

    Try to reset your device:
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

  • Not getting text messages in group message

    When I am in group messages on my iPhone 4, fw 5.1.1, I randomly dont get text messages. I will get about 50% of the messages while everyone else in the group gets every message. I have already tried restoring my firmware teice, once normal, once while in dfu mode. i then set up my phone as a new iphone and I still had the problem. I use at&t while others in the group messages use sprint verizon and at&t.

    I have had the same problem for the past two weeks, i have figured out that it is something that is with my ATT acount, I can take my SIM card out and put it in any other Iphone and it recreates the problem ( I have replaced Sim card twice).
    ATT people have deleted my account and recreated it and its still not working.
    I can put my roomates SIM card in my phone and group messages start working perfectly.
    All of ppl on my group text are ATT and have iphones.
    Please let me know if u fixed yours or find a solution.

  • Iphone 5 not getting text from new numbers?

    im on ios 7.0.4. Recently, ive been having the problem of not getting messages from new numbers. I receive all texts and calls from all current phone numbers ive ever had contact with. But for the past month, any new numbers that text me first, i do not receive them. But if i text and or call them first, it works fine. Which isnt always a convinence. They sent me screen shots of my number and their text; they all have different phones on different services.

        Perk123, this is a text messaging mystery! I'm on the case. I recommend that delete all unwanted text messages on your device and power it off/on to soft reset it.
    You will also need to advise your friend that has the AT&T iPhone to reset the network on their device. This can be done by accessing Settings >General >Reset >Reset Network.
    Lastly your friend needs to verify if your contact has been set up to block calls and text messages from your mobile number. This option is located in Contacts >your contact> Block this caller.
    Keep us posted.
    LasinaH_VZW
    Follow us on Twitter @VZWSupport

  • Can not get text selection cursor to change to column selection cursor

    Hi, Thank You for any time and help .
    I'm new to InDesign, and I'm hoping to use the new feature of moving columns / rows.
    But, I can not get the text cursor to change into the column or row selection cursor. 
    I am able to get the resize cursor, or use the ctrl+3 shortcut to select the entire column,
    but I can not get the downward pointing arrow cursor to select the column, and/or move it.
    Sometimes the row selection cursor will appear, and some rows can be moved, but I have been unable to move the columns.
    Thanks again, all my best

    Thank You Sumit !
    That does appear to work, but not in all cases?
    Example: 9/12/2014 10:44:14 AM - YouTube  <--quick vid capture of issue.
    I am able to select and move columns and rows, but columns appear to need a 'clean' column to work / move?
    Thanks again, I sincerely appreciate it!

  • Not getting Text data of Infoobject

    Hello everyone
    For Infoobject 0BP_MEDIA we are using infopackage
    0BPARTNER_TEXT for text . But we are getting data upto psa but not in theText table /BI0/TBP_MEDIA ( of Master Tab of Infobject ) . Because of this in Bex we are not getting names of the customer . We are using standard content for the infoobject 0BP_MEDIA . We want the data with name of the customer . Please suggest a solution .
    Regards
    Nilesh Vakil

    Hi,
    I think you are using below settings in "processing" tab :
    "Only PSA" check marked with
    "Update subsequently into data targets"
    and this text load is happening via PROCESS CHAIN.
    If I am not wrong please verify weather you have two processes in process chain as mentioned below :
    1) Execute Info package
    2) Read PSA and update into subsequent data target.
    I think the 2nd process is not there in your process chain.
    So you will have to include that in process chain.
    Thanks,
    Mihir

Maybe you are looking for