I am not getting the Portal Content inside the System Landscape

Hi,
I am not getting the Portal Content inside the System Administrations-> System Configuration->System Landscape. This is not visible. I am SAP NetWeaver 7.0.
What could be the possible reasons?
Regards
Kaushik Banerjee

Kaushik,
do you have the full tree in Contentadmin? do you have no entry in the systemadmin? or is it just empty in the lower nodes? this would be normal, you don't see the content in systemadmin, just the defined systems.
kr, achim

Similar Messages

Is it possible to do portal content transports through System landscape?

Hello,
In order to transport content from portal A to portal B I am currently using transport packages: export the content from portal A, download it to the local PC and import it to portal B. The process is working OK but I still have a question:
SAP are transferring all the control on their systems to the System landscape, for example Java developments. My question is if it is also possible to make these transports through the system landscape so no local PCs are involved in the process?

Hi Roy,
You are right in the point that development projects can be transported, using the NWDI, centrally managed through the system landscape.
Nevertheless, the PCD transports (EPA) have to be touched manually anyhow. Theoretically, you can set up an SDA and put an EPA into it, see http://help.sap.com/saphelp_nw04/helpdata/en/a3/782240da03e569e10000000a155106/frameset.htm for details.
But this only really makes sense if you want to transport your own application together with the portal configuration (iViews representing your application...).
So in the end, PCD transports are designated to be transported as you are used to - manually via the export / import function of the portal.
Hope it helps
Detlev

Any iviews not getting opened from the portal content.

Hi,
Recenlty i found that the any of the iviews of the portal content are not getting opened.When i click on any of the iviews a blank page pops up.But the iviews when dispayed in the top level navigation gets opened there.Even the personalize option in the masthead pops with a blank screen.
Am not able to figure where the problem is exactly.Pls help.
Regards.
Adity.

We are using IE-7 and as per our clients requirements the portal has to be run on IE-7.May be this may be the browser problem but what settings i need to do to make all iviews running fine.This problem was not earlier but i am seeing this since a week.And all iviews pop up with a blank screen.
Regards
Adity

Problem URL-IView - is not display in the Portal Content Area

Hi!
I have a problem. My URL-IView is not displayed in the Portal Content Area. The setting "launch in new window " is "display in Portal Content Area". What can I do that the URL -IVIiew is not display in a separate window.
Can anyone help me???
Thank you very much
regards

Hi.
You have to add your URL iView to a page. See URL iview - The page cannot be found for details.
Best regards,
Aliaksandr Zhukau

HT4059 I've purchased a book, but there is no content inside the book. How can I get a proper version?

I've purchased a book, but there is no content inside the book. How can I get a proper version?

You should be able to delete the book via the Edit button at the top right of the bookshelf and then re-download via the Store button at the top left and then the Purchased tab. If it re-downloads in the state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that book and use the 'Report a Problem' link.

How to use an self-made iView in the Portal Content?

Hi everybody,
I followed the instructions to set up a Portal (6.0 SP 2) with the PDK. Now I just wrote a simple "Hello-World" iView and deployed it into the portal server. It worked fine when I clicked to test it in the Java Development Inspector.
But...
In the Portal Content I can not find my self-made iView? How do I get it there? I coudn't find any documentation.
I'd appreciate your help!

In the portal content try to create a new Iview and select the option (create new iview from portal Archive).
After selecting that you will see all the PARs deployed on your server, just select yours and follow on.
Hope that helps.
Thanks
Ankur

Portal content for the room.

Hello,
We created a new Room in portals for collaboration. I then added a user to this room, but not as an owner.
Both the owner and the user of the room can see the room from the role Collaboration -> Room Directory. But once we click the room there is no way to collaborate on the content. This is however not a problem with the previously rooms. This problem started when we migrated from NW2004 sp16 to sp17.
Has anybody experienced this issue before. Would you know how I can get the New>, or the New Folder> links so we can collaborate on the rooms.
Thank you for the help.
Best Wishes
Sumit.

Hey Irina,
This problem persists. We have since created new rooms and asked the users to collaborate again. We slowly try to move the old content from the directories back to the new rooms.
Hope that helps.
Sumit.

Collaboration Launch Pad as iview in the Portal content

Hi friends,
i have the following problem. I configured the collaboration launch pad (real time collaboration) and it works fine.
I just don´t want to start the iview from the collaboration link next to the TREX search. Instead of that i need the iview with the user status and the possibility to start an instant message session within the portal content.
Does anyone know if it is possible and what is the name of the corresponding iview?
Thanks in advance
Michael

Hi Michael
Create an new iView (new from PAR => iView) and select the com.sap.netweaver.coll.shared.ui
Create a link in the iView to the contacts:
In the iView properties add in field "Path for Initially Displayed Folder": /alias/%3Cmycontacts%3E
and in field "Path for Start Uri": /alias/<mycontacts>
Hope this helps.
This worked, but I needed also to activate the Tool Area with activated CLP link. I didn't get it work without Tool Area.
Regards,
Stefan

Problem in loading the Portal Content Directory Structure & Detailed Naviga

Hi
we have installed EP6 SP16.When we are opening any tab detailed navigation is not loading.Some java sript errors are coming.Here iam pasting those errors.
Please suggest asolution.logged in as super admin
java script errors
access denied.
null or not an object.
object required.

Hi Gopi,
A. Pls check your browser settings.
We did face similar problems like Java script errors throwing msg's
" null or not an object.
object required"
Hope you are using IE. If so,
1. Go to Tools - > Internet Options - > Advanced .
Enable " http1.1 through Proxy Connections".
2. Increase the Cache.
B. Check whether the user has permissions to access the portal content
Go to Content Administration - > Portal Content.
Select Portal Content and right click. Select Permissions and check out.
Regards,
Venkat.
[Pls reward points if useful]
Message was edited by: venkat

Unable to see the portal content directory in content adminstration

Hi,
I am unable to see the portal content directory in the content administration. I am not the super administrator.I have been assigned content admin role. But, I am unable to see the PCD.I see from previous blogs that permission has to be set for my role.
Can any one help me in telling the procedure to set the permission.If permission is not the issue then do tell me the solution for it.
Suganya

Hi Suganya,
The content admin role normally is sufficient to see / read the portal content catalogue (as far as the standard settings are concerned). But maybe they have been restricted on your implementation by some administrator.
Some with sufficient permissions on the portal content catalogue has to right-click on the root (portal_content) object, "open", "permissions", and has to provide at least administrative "read" permission to you, some role (content admin for example) which is assigned to you or some group you belong to.
Hope it helps
Detlev
PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

Unable to see the portal content directory in content administration role

Hi,
I am unable to see the portal content directory in the content administration. I am not the super administrator, i have been assigned other roles. But, I am unable to see the PCD. Please help me how this can be sorted out.
Thanks much in advance,
Sunitha.S

Hi Sunita,
Contact your systen admin people , he/she will assign the Read/Write or Full controls to content_admin_role in the system administration -> Permissions -> select portal content folder and right click the select open Permissions , There he/she has to add content_admin_role in Assigned Permissions category and under Administrator category select Full Control and select End user check box and save the changes.
Then you can see the Portal Content and you can create /change the portal contents.
Thanks and Regards,
Hari

When I open a message in Thunderbird, I sometimes get the message content of the preceding message.

When I open a message in Thunderbird, I sometimes get the message content of the preceding message.
This means that the whole content of the message is replaced by the content of the preceding message. I cannot see the message and have to ask the sender to send it again. Why is this, is my mail system overloaded or what?

This usually indicates folder corruption.
Right click the problem folder and select Properties. Then Repair Folder.
Be prepared to lose messages if the corruption is too bad. It might be a good idea to move any messages that you want to keep to a new folder. Make folders under Local Folders to sort your keeper emails into. It is a good idea not to keep lots of mail in the Inbox anyway as you will see when you read the attached article.
Read this article about maintaining your system to help prevent this in the future.
http://kb.mozillazine.org/Keep_it_working_-_Thunderbird

Internet exlorer 7.0 can not display crm portal content

hi gurus,
we are using crm5.0+ep7.0, we have loaded the portal content (business packages) for crm and crm high tech. the patch level is: 13 level 0 (BBPCRM is 6).
I use portal role channel manager. when we want to display some crm content in portal which runs by explorer 7.0, sap will popup another window and turn into blank with error. the ie error says: object doesn't support this property or method. and the url:http://crmdev.iecsh.com:8000/sap(ZT1PQnhTbWh6Ym01Y0R3M0JqKnQ2R1VRLS10MDlLNjhsU1Z6XzdLTmUqc2RFUjFnLS0=)/bc/bsp/sap/crm_bsp_frame/mainDH.do
while the original window is just continuing displaying the signal: loading.
with ie 6.0, it's ok.
can anyone help me out? thank you very mcuh.

Microsoft Internet Explorer 7 as mentioned in SAP Note 981710 this version is not supported by any current NetWeaver Portal / WebAS / ITS / BSP / BEX / CRM Web Application Component......
SAP Strongly recommend to our customers to block this update until this version
This version (IE 7.0) "should be" supported as of SPS19 (NW '04) or SPS10(NW 2004s) and there exist several errors found in the operation on previous releases.
be supported or the SPS be released (this is mentioned on the note), please note that once the system has performed the update there is not possible to go back to IE 6.0
For further information please refer to:
http://www.microsoft.com/technet/updatemanagement/windowsupdate/ie7announcement.mspx
http://service.sap.com/sap/support/notes/981710

How to rename (com. company ) the portal content folder, iview, role.,

Hi All,
How can we rename the folder name, folder id, role, workset, page and iview properties to a new company(brand) name?
For example, if we have com.xyz in the folder id prefix, we need to rename as com.abc.
Basically this is required to change the brand name in the each level of the portal package. The end user should not see the old brand name in any of the content including view, url, etc.,
Please help! Thanks in advance!
Regards,
Senthil

Hi,
Changing the ID of a PCD object is not like changing an attribute.
As the PCD is a JNDI provider, the name of the object is its unique identifier, and changing it conceptually means deleting it, and creating a new one.
One of the obvious ways to solve the issue in your case is to change the prefix once in each system.
However, in newer versions of the portal (like 7.3 and above), there is an option of change recording, that can be used:
Managing Change Recording in the Portal - Portal - SAP Library
Unlike in older versions where deletions and "change IDs" couldn't be transferred, this feature enables to transfer also such operations on the content.
All the above is correct as long as you are not trying to change content which is provided by SAP.
Content provided by SAP, that starts with the "com.sap." prefix must not be changed.
Thanks & regards,
Michal

I am trying to use a interactive form and it says "If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document." This is a IRS form and has worked before.

I am trying to use a interactive form and it says "see below" This is a IRS form and has worked before.
is there a tech support phone number?
Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF
viewer may not be able to display this type of document.
You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by
visiting http://www.adobe.com/go/reader_download.
For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader.
Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark
of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries

That means you are looking at the form online with a browser that uses its own (incompatible) PDF viewer, not the Adobe Reader plugin.
Either
download the form to your local disk and fill it from there
use a browser that employs the Adobe Reader plugin
configure your browser to use the Adobe Reader plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

I am not getting the Portal Content inside the System Landscape

Similar Messages

Maybe you are looking for