I am not having any luck trying to create a brochure with ID in CC

I am not having any luck trying to create a brochure with ID in CC. i thought i remembered it to be something you can use in Bridge also. Can't seem to find that either.
anyone have any help they can offer?

If you're starting from scratch learning InDesign, know that it's difficult to learn just by asking a few questions. You'll do much better either by buying an excellent, inexpensive book by Sandee Cohen:
InDesign CC: Visual QuickStart Guide
Or by watching some videos on www.Lynda.com. Here's the best introduction:
InDesign CC Essential Training

Similar Messages

Recording vinyl with Audacity - not having any luck

I'm trying to record my vinyl collection using audacity and not having much luck. I've got the line in and can get the red recording cursor moving but no waveform appears. I have followed the info on the wiki but I cannot get any further.
The wiki is all over the place with info. Does anyone have an idiots guide?
thanks

One of the issues 'glossed over' in the article is that a Mac expects to see a line-level input and many turntables (like mine) need a small pre-amplifier )like this one http://www.radioshack.com/product/index.jsp?productId=2541471&cp=&sr=1&origkw=li nelevel&kw=linelevel&parentPage=search ) to furnish the proper audio level.
It sounds like this the the original poster's problem.
Another approach is to use the line-level output from your audio amplifier (if you still have one) because the audio amp should have the phono pre-amp built-in.

Trying to clean install Leopard 10.5.6 and not having any luck!

I recently received a Powerbook G4 15 inch from a friend of the family without any OS installed on it. I was told by the tech's at the Apple Store that it would take Leopard OS so I purchased Leopard 10.5.6 and now I'm trying to install the software and I am continually getting multiple errors while trying to install.
So my question is:
Is Leopard 10.5.6 compatible with my Powerbook G4 15 inch and if it isn't can someone PLEASE tell me which OS is compatible with my Powerbook? Thanks in advance!

I just did this on a 1.67ghz PBG4 with a replaced HD so I know it can be done. As Neil said, if you have a retail copy it should load fine. If you have an original disk that shipped with a machine (Gray Disks) then it will not work. Maybe you should check with the person who gave you the machine to see if they were having any problems. OR, find out if they have the original gray Apple install discs so you can at least run a hardware test.
Good Luck!

I'm trying to get my new airport extreme to print wirelessly to my samsung clx usb printer and not having any luck. I downloaded the bonjour print wizard and I know there's a signal going to the printer, but it still will not print? Any ideas?

I'm trying to wirelessly print to my samsung printer. I've downloaded the bonjour printer wizard and could tell that a signal was going to my printer but it still would not print. Anyone have any ideas?

You didn't state how it's connected to each computer, if it's connected through your router then it should work. If it doesn't then you need to contact Canon and ask for assistance.

Trying to convert video made in iMovie from Mp4 to M4v so I can burn to DVD downloaded Aimersoft video converter but not having any luck

I have downloaded a wedding video done on my iPad and put it in iMovie on my MAC. Have spent many hours refining it and now want to burn onto DVDs for other family.
When I did this same thing 4 years ago, I had one-to-one help at apple store and saved the video in M4V format and it was not a problem to share the video.
Now this video is in Mp4 and I need it in M4V - that is what the burning devise tells me.
I downloaded a video converter, but it didn't seem to make the coversion.
IDEAS?

Have you tried this -> https://itunes.apple.com/us/app/free-mp4-converter/id693443591?mt=12?
It's free at the Mac App Store...
Clinton

I am trying to authorize my computer and am not having any luck

I am trying to authorize my computer to download some apps and it tells me to go to the apple store and go to authorize my computer and I do it and i am getting nowhere. Does anyone have any solution to this problem??

Have a look here http://support.apple.com/kb/TS1389
And Here About authorization and deauthorization

Trying to import a photo file from my downloads folder.Want to get it to Iphoto.Not having any luck.

Trying to get a photo file from dowmloads folder to Iphoto so I can burn to disc.Can't figure out how to do it.Tried dragging states unrecognizable file.Help.

That's not a photo file; it's a compressed container which could contain almost anything.
Where did you download it from? Was it shown as a photo in Google Images or one of the other search sites?

TS3888 I have an iMac and I am trying to connect to wsbs 2008. i am not having any luck any ideas?

I have an iMac and cannot access my office computer running Windows Small Business Server 2008 through Remote Desktop. Any ideas?

Hi, do you know it's IP? Can you ping that?
Might give a try with the free
logmeIn...
https://secure.logmein.com/products/pro/register.aspx

Just Not Having Any Luck With E-Mail Address, ect.

Kuduo,
First off thank you so much for just doing this!!! I have been dealing with the company, and it's a nightmare!
I am still getting nowhere as far a establishing a e-mail address for the e- what ever it's called on my printer.
I have a new hp photosmart all in one D 110 A, and I finally did get it to work without using a usb cable, even
if the print out tells me that I should change it as I caould have others use, see my things. I do use my wire-
less computer(laptop) to obtain a connection, and get a very good one from some new neighbor. I do not
want to chage it, and the report at one point even said it was "critical"
I have printed out several time the things it tells you to, but have yet to see any e-mail address???!!! So just
what is the scoope on this anyway?
I do know that it took me forever , and also alone to even figure out how to use my printer without the usb cord,
and for now she is working fine.
The one problem is that it does start to print off the wall, and also I hace change the settings 10 times from
color to black, but it only goes back to prihting COLOR!!!!!
Thanks For Your Help In Advance
Debbie

Enable Web Services from the front of the printer.
What operating system are you using and I can give you a hint about the color/black thing.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I have updated Adobe Flash as you reccommend, but still cannot see videos. I have followed your instructions but not having any luck. help.

Videos qit working on my computer. It was suggested to update Adobe. I have saved it and ran it but nothing happens. How do I get it back working. Not very good when things dont go right. Have looked at your help pages and nothing has helped. Thanks.

I think that means your Flash player is installed and working. But why not on popular sites? Hmmm... to see whether an add-on is at fault, you could try Firefox's Safe Mode.
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, close Firefox, hold the Shift key, and restart Firefox in
[http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
Does YouTube work in Safe Mode? If so, a conflicting add-on is the most likely culprit.

I have an Epson NX420 printer/scanner, and I keep getting a message on the scanner, saying that there is a communication error, check the connection. I am not having any luck scanning my pictures into the computer.

I have an Epson Nx 420/printer/scanner, and I keep getting a message that says there is a communication error. Check the connection [W-61}. I have the snow leopard operating system Mac OS X 10.6.8 I want to scan my pictures into iphoto. Can someone please tell me what I am doing wrong. Thankyou.

Make sure you have updated all of your scanner drivers. Check Software update and check with Epson tech support.
Not sure if the Gutenprint and Gimp-Print for Mac OS X (10.2 and later) drivers deal with scanners. Read the info on their website.
Check Apple's Knowledge Base for Snow Leopard & Lion Printer solutions and suggestions for scanner troubleshooting. Especially if you have an all in one.

I put my music (all my own CDs) from my home computer onto my iPhone. I would like to upload that music to my office computer. Not having any luck. Worried about losing it.

Music from my CDs on my home computer- put that on my iPhone. Now want to put that on my office computer. Having trouble, don't want to lose anything. What should I do?

Best option is to use a secure backup solution on your home computer. To transfer from iPod to computer you would need to use a 3rd party tool such as TouchCopy (many alternates are available).

I am trying to create mp3 version of itune songs. I have gone through the preference sequence to be mp3 encoder but this is not having any effect. I have also tired from file tab to create a version but this is not available to action

I am trying to create mp3 version of itune songs. I have gone through the preference sequence to be mp3 encoder but this is not having any effect. I have also tired from file tab to create a version but this is not available to action showing as lite grey.
Any help would be appreciated

I am trying to create mp3 version of itune songs. I have gone through the preference sequence to be mp3 encoder but this is not having any effect. I have also tired from file tab to create a version but this is not available to action showing as lite grey.
Any help would be appreciated

HT3606 I have Mac OS X version 10.5.8 and so im wondering what is the next step i need to get. i have tried to get snow leopard and other things and not having any lukck . can any one help me out pls.

I have Mac OS X version 10.5.8 and so im wondering what is the next step i need to get. i have tried to get snow leopard and other things and not having any lukck . can any one help me out pls.

If your Mac meets these requirements:
http://support.apple.com/kb/SP575
then you can order a Snow Leopard disk and install it.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Ciao.

Secure link to itunes store failed computer not connected to internet tried ununininstalling everything to do with itunes no joy also error code coming up E0000225 anybody out there got any ideas

Secure link to itunes store failed, (computer not connected to internet tried uninstalling everything to do with itunes,no joy also errror code E0000225 appearing. Have turned off windows firewall and also my Bullguarg security settings.Can anybody out there please help me thanks.

Hi,
You could be right that the response to clicking on help is a symptom of an entirely separate issue, but nevertheless the secure link to itunes is definitely failed, and I am unable to log into Itunes on either PC.
I also noticed that even if I click on the link to create a whole new Apple ID, I cannot do that either, presumably because the secure link is not working.
After I noticed that there were weird things happening this morning, I did change my Apple ID password in the hope that this might resolve it, but it seemed to make it worse. Now, all of my apple devices keep constantly prompting me for the apple ID password, and randomly either accepting it, or telling me it is wrong. I know the password is correct because I can log onto the apple Manage My Apple ID screens in a web browser with it.
I was starting to think that this is an ISP issue (BT Broadband), but I have not seen anyone else posting with the same issue. Does Apple use a different security protocol to everyone else? I'm asking because all other secure services seem to be working fine, but anything related to apple that requires a secure connection or authentication is having issues.
I have also seen reference to making sure that Itunes is listed as an allowed program in Windows Firewall. I cannot seem to do this because it says that my Windows firewall is being managed by McCafee. I have checked the settings in McCafee, and it appears to me that Itunes, Bonjour, and many other apple programs have been granted "Full" access. As said before in any case I have tried temporarily disabling the firewall and even this did not solve the problem.

I am not having any luck trying to create a brochure with ID in CC

Similar Messages

Maybe you are looking for