I am not succeeding in connecting my I pad to my printer

I am not succeeding getting the printer connected to my I pad / I phone.
It is connected to two pc's

Similar Messages

Is there a cable available that will connect an I pad to an older printer?

Is there a cable available that will connect an I pad to a printer?

If you have a Mac or PC there are utilities available that enable them to act as a print server, enabling you to print to any printer the Mac or PC can use.
The donation-supported handyPrint and a commercial product such as Printopia ($19.95 with free trial) are two examples. The Mac must be "on" but may be asleep for them to work. Equivalent PC options may exist but you're on your own finding them.
You can also buy this standalone print server:
http://www.lantronix.com/it-management/xprintserver/xprintserver.html
These options enable you to use any printer available to your network, even older ones that may predate AirPrint by decades. But as Bob said, everything you do with an iPad is wireless.

The restor pocess did not succeed because your computer cannot connect to the server - Windows Server 2012 R2 Essentials Experience

Hi all
I've been running Windows Server 2012 R2 with the Essentials Experience in test for a Windows 8.1 client environment, on an HP ProLiant MicroServer N54L. Overall I've found the Essential Experience set-up over WHS2011 and WHSv1 okay; still looking to extract
any real value over the former versions.
This box has been up and running for a few months now, with client backups of a Win 8.1 box scheduled and running successfully every day. However when trying to conduct any file restores from the backups, to the client, I receive an error dialog once I go
through motions from the Dashboard:
On the 'Devices' tab, right-click the appropriate client and select 'Restore files or folders for the computer'
'Restore Files of Folders' dialog pops up, asking me to 'Choose a backup' from the list of all the backups that have run
Select any one in the list - have tried numerous backups; automatic, manual, etc. same result every time
Brings up the dialog to 'Choose a volume', choose either C: or D: partitions of the same fixed drive - again, no difference which one I choose, the outcome is the same
'Opening the volume' dialog starts, with progress bar, runs to about 4% complete the pops up the dialog 'The restore process did not succeed'. Full error in the dialog, "The restore process did not succeed because your computer cannot connect to the
server. Make sure that the computer is connected to the networkm and then try again
If my computer cannot connect to the server - how can I get that far? How can I open the dashboard, select a client, select from a list of backups, select a volume to restore, etc. What is going on here?

Hi,
Please check if a "host" entry for the server is added to the client. For more detailed information, please refer to the threads below:
Unable to Restore files or folders from a Client Backup
http://social.technet.microsoft.com/Forums/en-US/d1d001bd-20c5-4f09-861d-526c31567963/unable-to-restore-files-or-folders-from-a-client-backup
Can't restore anything
http://social.technet.microsoft.com/Forums/windowsserver/en-US/98e269b5-2bd1-449e-a213-e386ae15266f/cant-restore-anything?forum=winserveressentials
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

10g Enterprise Manager is not able to connect to the database instance

I am running a Oracle 10g database in Solaris 10 server. When i am trying to connect to the enterprise manager it says Enterprise Manager is not able to connect to the database instance.
The database instance is open,the listener is up and the agent connection also says that it succeeded.
The server houses two 10g databases and the EM was working properly till yesterday. Kindly Help.
Thanks in advance.
Ram

Hi,
The EM is started and if i give emctl status dbconsole
-bash-3.00$ emctl status dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
http://gladiator:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running
Logs are generated in directory /db8/ora10gr2/product/10.2.0/Db_4/gladiator_TROY/sysman/log
it says that the EM is running. But when i am trying to access the URL it is in IE it says Page cannot be displayed what could be the problem for this???
Thanks in advance.
Ram

Problem with EM (Enterprise Manager is not able to connect to the database)

Hi all,
I've Oracle DB 11g Rel.1 installed on Windows XP SP3. The database is up and running i.e. everyone can connect to the DB by using any App tool e.g. SQL*Plus, Forms, or Reports. It means that the listener and the service is running. But the problem is that when I try to start the EM I see some error messages on the webpage.
It says:
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.Database Instance (Green arrow)
Status     Open                         Details     The instance is open.
Host          shiman
Port          *1521*
SID          orcl
Oracle Home     d:\Oracle\product\11.1.0\db_1
Agent Connection to Instance (Green arrow)
Status Succeeded
Details
Listener (Green arrow)
Status     Up
Host          shiman
Port          *1521*
Name          LISTENER
Oracle Home     d:\Oracle\product\11.1.0\db_1
Location     d:\Oracle\product\11.1.0\db_1\network\admin
Details
please see the attached file:
http://rapidshare.com/files/404840300/em.JPGI've already checked all the services, they are running. And when I execute emctl command I got the following message.
emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://shiman:1158/em/console/aboutApplication
Oracle Enterprise Manager 11g is running.I have checked some documents around config files in sysman and test_orcl\sysman directories. Moreover, I have checked dbsnmp and sysman account for unlockness and password accuracy. But they did not help me to solve the problem.
My question is if every thing is working fine then what is the problem with the EM? Why it is not connecting to the DB?
Thanks.
Iman

emdctl.trc2010-07-13 18:42:21 Thread-2196 WARN http: snmehl_connect: connect failed to (shiman:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2010-07-13 18:42:26 Thread-4856 WARN http: snmehl_connect: connect failed to (shiman:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2010-07-13 18:42:28 Thread-5684 ERROR ssl: nzos_Handshake failed, ret=28864
2010-07-13 18:42:28 Thread-5684 ERROR http: 1704: Unable to initialize ssl connection with server, aborting connection attempt
2010-07-13 18:42:28 Thread-5684 ERROR main: nmectla_agentctl: Error connecting to https://shiman:3938/emd/main. Returning status code 1
emoms.trc2010-07-13 18:45:44,562 [ApplicationServerThread-1] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:46,875 [ApplicationServerThread-2] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:46,921 [ApplicationServerThread-0] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,078 [ApplicationServerThread-2] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,125 [ApplicationServerThread-1] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,140 [ApplicationServerThread-3] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,187 [ApplicationServerThread-0] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,234 [ApplicationServerThread-5] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,281 [ApplicationServerThread-4] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:47,328 [ApplicationServerThread-6] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:48,984 [ApplicationServerThread-2] ERROR conn.ConnectionService verifyRepositoryEx.818 - Invalid Connection Pool. ERROR = Locale not recognized
2010-07-13 18:45:49,000 [EMUI_18_45_48_/console/aboutApplication] ERROR svlt.PageHandler handleRequest.639 - java.lang.IllegalStateException: Response has already been committed
java.lang.IllegalStateException: Response has already been committed
     at com.evermind.server.http.EvermindHttpServletResponse.resetBuffer(EvermindHttpServletResponse.java:1853)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:260)
     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:42)
     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:204)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
     at oracle.sysman.emSDK.svlt.PageHandler.render(PageHandler.java:1113)
     at oracle.sysman.emSDK.svlt.PageHandler.myRender(PageHandler.java:1173)
     at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:597)
     at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:781)
     at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:337)
     at oracle.sysman.eml.app.Console.doGet(Console.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:87)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:134)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:306)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
2010-07-13 18:45:49,000 [EMUI_18_45_48_/console/aboutApplication] ERROR em.console doGet.357 - java.lang.IllegalStateException: Response has already been committed, be sure not to write to the OutputStream or to trigger a commit due to any other action before calling this method.
java.lang.IllegalStateException: Response has already been committed, be sure not to write to the OutputStream or to trigger a commit due to any other action before calling this method.
     at com.evermind.server.http.EvermindHttpServletResponse.sendRedirect(EvermindHttpServletResponse.java:1339)
     at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:806)
     at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:337)
     at oracle.sysman.eml.app.Console.doGet(Console.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:87)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:134)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:306)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)

Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...

Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...
So only one imac, only one ipad..and so on simultain.
More over, all the divices are conect through wifi to air base but are not receiveing internet as i told above.
I need to disconnect one device to have internet on the second one from the same type!
Could somebody help me?
Many Thnaks,
dan

If your network configuration is:
Cable modem > (Ethernet cable) > [WAN] AEBS > (wireless) > Macs, then
AirPort Extreme Base Station Setup (AEBS) w/High-Speed Cable Modem
Modem/Router Power ReCycling
- Power-off the Cable modem, AEBS, & computer(s). (If possible, leave the modem off overnight.)
- Power-on the Cable modem; Wait at least 30 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
- Power-on the computer(s)
Perform a "hard" reset of the AEBS.
- (ref: http://docs.info.apple.com/article.html?artnum=107451)
Setup the AEBS
With the network components powered down, set up the AEBS, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, try these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- AirPort Network Name: <whatever you wish or use the default>
- Create a closed network (unchecked)
- Wireless Security: Not enabled
- Channel: Automatic
- Mode: 802.11b/g Compatible
Internet tab
- Connect Using: Ethernet
- Configure: Using DHCP
- WAN Ethernet Port: Automatic
Network tab
- Distribute IP addresses (checked)
- Share a single IP address (using DHCP & NAT) (enabled)
Once you verified that you can get Internet access for all of your computers, you should secure your wireless network. To do so, I suggest that you make these changes:
AirPort tab (optional)
- Create a closed network (checked)
Change Wireless Security
- Wireless Security: WPA Personal
Base Station Options - WAN Ethernet Port
- Enable SNMP Access (unchecked)
- Enable Remote Configuration (unchecked)
- Enable Remote Printer Access (unchecked)
Wireless Options
- Transmitter Power: 10%
Access Control tab (optional)
- + <add the computer(s) that will access this wireless network>

Not able to connect linux database instance in another machine

Hi,
I have installed oracle 10g database server in Linux, and i created one database instance. and i have added tns entry and listener entry.
I am to connect the database on that machine. but not in different machine. i am able to access/ping linux machine in another machine also.
while creating tns entry for linux database instance in another machine using "netca" i am getting this error.
Connecting...ORA-12560: TNS:protocol adapter error
The test did not succeed.
Some of the information you provided may be incorrect.
Click Back to review the information provided for net service name, or Change Login to change username.
I verified listener and tns entry ( i think for this listener configuration is enough) also. and database is up.
If anybody knows why i am not able to connect linux database in another machine. is there any network configurations other than listener configuration.
Thanks in advance.

yes i tried to connect with ORACLE_SID, its successful. and using tnsname like you said.
Instead of using netca to create the tnsnames.ora entry on the second server, copy the tnsnames.ora entry from the DB server. Then use tnsping to test connection :-i done above but not able to ping the tns name, i am getting this error.
TNS-12560: TNS:protocol adapter error
------------------------------------------------

ORACLE 10G - NOT ABLE TO CONNECT THRU EM

HI , I NEED HELP FROM ORACLE EXPERTS PLEASE ,
I HAVE INSTALLED ORA10G.
FROM COMMAND LEVEL I CAN CONNECT AS SYSDBA .
BUT FROM ENTERPRISE MGR I GET ERROR
SQLException
Listener refused the connection with the following error: ORA-12514, TNS:listener does not currently know of service requested in connect descriptor The Connection descriptor used by the client was: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=orcl)))
But database in open .
even from Net Manager , when I test the connection I get
Attempting to connect using userid: sysdba
The test did not succeed.
ORA-01017: invalid username/password; logon denied
There may be an error in the fields entered,
or the server may not be ready for a connection.
When I give command
EMCTL START DBCONSOLE I get error
ENVIRONMENT VARIABLE ORACLE SID NOT DEFINED
I have tried to change all 3 sqlnet.ora / tnsnames.ora / listener.ora/
here are samples .
# listener.ora Network Configuration File: C:\oracle\product\10.1.0\Db_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = orcl.world)
(ORACLE_HOME = C:\oracle\product\10.1.0\Db_1)
(SID_NAME = orcl)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
# tnsnames.ora Network Configuration File: C:\oracle\product\10.1.0\Db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = LOCALHOST)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl.world)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)

When I give command
EMCTL START DBCONSOLE I get error
ENVIRONMENT VARIABLE ORACLE SID NOT DEFINEDYou need to define the ORACLE_SID environment variable for the db console to start.
C:\> set ORACLE_SID=orcl
C:\> emctl start dbconsole

Standby Database not succeeded

Hi experts, I need your assistance.
I am configuring physical stby database on the same host on oracle Release 11.1.0.6.0 win xp. But not not succeeded.
These are the steps I followed
Host name = sumanr
Primary database = orcl
Stby database = stby
1. On the same host I created the instance as 'stby' for the standby database using oradim
2. created the password file using orapwd
3. added the entry for stby databse in tnsnames and listener files
4. created the initstby.ora file with the single entry for db_name=orcl
5. started the stby database in nomount mode.
-------On Primary created the stby redologs
alter database add standby logfile group 4
('C:\app\oracle\oradata\orcl\sby_redo01.rdo') size 50M;
alter database add standby logfile group 5
('C:\app\oracle\oradata\orcl\sby_redo02.rdo') size 50M;
alter database add standby logfile group 6
('C:\app\oracle\oradata\orcl\sby_redo03.rdo') size 50M;
alter database add standby logfile group 7
('C:\app\oracle\oradata\orcl\sby_redo04.rdo') size 50M;
--------OnStandby
sqlplus / as sysdba
startup nomount
------On Primary RMAN
connect target sys/oracle@orcl
connect auxiliary sys/oracle@stby
run {
   allocate channel c1 type disk;
   allocate auxiliary channel s1 type disk;
duplicate target database
        for standby
        from active database
        dorecover
        spfile
        parameter_value_convert 'orcl','stby'
        set db_unique_name='stby'
        set db_file_name_convert='orcl','stby'
        set log_file_name_convert='orcl','stby'
        set control_files='C:\app\oracle\oradata\stby\control01.ctl','C:\app\oracle\oradata\stby\control02.ctl','C:\app\oracle\oradata\stby\control03.ctl'
        set fal_client='stby'
        set fal_server='orcl'
        set standby_file_management='AUTO'
        set log_archive_config='dg_config=(orcl,stby)'
        set log_archive_dest_2='service=orcl LGWR ASYNC valid_for=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=stby'
        set log_archive_dest_state_2='enable'
        set log_archive_format='stby_%t_%s_%r.arc';
sql channel c1 "alter system archive log current";
run {
   allocate auxiliary channel s1 type disk;
   sql channel s1 "alter database recover managed standby database using current logfile disconnect";
}Now in stby when I check v$log, it gives
SQL> select * from v$log;
    GROUP#    THREAD# SEQUENCE#      BYTES    MEMBERS ARC STATUS
FIRST_CHANGE# FIRST_TIM
         1          1          0   52428800          1 YES UNUSED
      2064244 17-AUG-09
         2          1          0   52428800          1 NO CURRENT
      2064280 17-AUG-09
         3          1          0   52428800          1 YES UNUSED
      2063000 17-AUG-09where as in primary it is
SQL> select * from v$log;
    GROUP#    THREAD# SEQUENCE#      BYTES    MEMBERS ARC STATUS
FIRST_CHANGE# FIRST_TIM
         1          1         67   52428800          1 NO CURRENT
      2067534 17-AUG-09
         2          1         65   52428800          1 YES INACTIVE
      2067226 17-AUG-09
         3          1         66   52428800          1 YES INACTIVE
      2067532 17-AUG-09dont know what I am missing. Pl. help me.
Thnaks

Hello SYbrand
Thanks for your resply. I have created the stby redologs in the primary and RMAN is creating them in the standby database.As I checked in the standby
SQL> select type,member
2 from v$logfile;
TYPE
MEMBER
ONLINE
C:\APP\ORACLE\ORADATA\STBY\REDO03.LOG
ONLINE
C:\APP\ORACLE\ORADATA\STBY\REDO02.LOG
ONLINE
C:\APP\ORACLE\ORADATA\STBY\REDO01.LOG
TYPE
MEMBER
STANDBY
C:\APP\ORACLE\ORADATA\STBY\SBY_REDO01.RDO
STANDBY
C:\APP\ORACLE\ORADATA\STBY\SBY_REDO02.RDO
STANDBY
C:\APP\ORACLE\ORADATA\STBY\SBY_REDO03.RDO
TYPE
MEMBER
STANDBY
C:\APP\ORACLE\ORADATA\STBY\SBY_REDO04.RDO
7 rows selected.
SQL>This is my RMAN outcome
Recovery Manager11.1.0.6.0
RMAN> connect auxiliary sys/oracle@stby
connected to auxiliary database: ORCL (not mounted)
RMAN> connect target sys/oracle@orcl
connected to target database: ORCL (DBID=1222322644)
RMAN>
RMAN>
RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 21> 22> 23> 24>
using target database control file instead of recovery catalog
allocated channel: c1
channel c1: SID=114 device type=DISK
allocated channel: s1
channel s1: SID=97 device type=DISK
Starting Duplicate Db at 17-AUG-09
contents of Memory Script:
   backup as copy reuse
   file 'C:\app\oracle\product\11.1.0\db_1\DATABASE\PWDorcl.ORA' auxiliary format
'C:\app\oracle\product\11.1.0\db_1\DATABASE\PWDstby.ORA'   file
'C:\APP\ORACLE\PRODUCT\11.1.0\DB_1\DATABASE\SPFILEORCL.ORA' auxiliary format
'C:\APP\ORACLE\PRODUCT\11.1.0\DB_1\DATABASE\SPFILESTBY.ORA'   ;
   sql clone "alter system set spfile= ''C:\APP\ORACLE\PRODUCT\11.1.0\DB_1\DATABASE\SPFILESTBY.ORA''";
executing Memory Script
Starting backup at 17-AUG-09
Finished backup at 17-AUG-09
sql statement: alter system set spfile= ''C:\APP\ORACLE\PRODUCT\11.1.0\DB_1\DATABASE\SPFILESTBY.ORA''
contents of Memory Script:
   sql clone "alter system set audit_file_dest =
''C:\app\oracle\admin\stby\adump'' comment=
'''' scope=spfile";
   sql clone "alter system set dispatchers =
''(PROTOCOL=TCP) (SERVICE=stbyXDB)'' comment=
'''' scope=spfile";
   sql clone "alter system set db_unique_name =
''stby'' comment=
'''' scope=spfile";
   sql clone "alter system set db_file_name_convert =
''orcl'', ''stby'' comment=
'''' scope=spfile";
   sql clone "alter system set log_file_name_convert =
''orcl'', ''stby'' comment=
'''' scope=spfile";
   sql clone "alter system set control_files =
''C:\app\oracle\oradata\stby\control01.ctl'', ''C:\app\oracle\oradata\stby\control02.ctl'', ''C:\app\oracle\oradata\stby\control03.ctl'' comment=
'''' scope=spfile";
   sql clone "alter system set fal_client =
''stby'' comment=
'''' scope=spfile";
   sql clone "alter system set fal_server =
''orcl'' comment=
'''' scope=spfile";
   sql clone "alter system set standby_file_management =
''AUTO'' comment=
'''' scope=spfile";
   sql clone "alter system set log_archive_config =
''dg_config=(orcl,stby)'' comment=
'''' scope=spfile";
   sql clone "alter system set log_archive_dest_2 =
''service=orcl LGWR ASYNC valid_for=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=stby'' comment=
'''' scope=spfile";
   sql clone "alter system set log_archive_dest_state_2 =
''enable'' comment=
'''' scope=spfile";
   sql clone "alter system set log_archive_format =
''stby_%t_%s_%r.arc'' comment=
'''' scope=spfile";
   shutdown clone immediate;
   startup clone nomount ;
executing Memory Script
sql statement: alter system set audit_file_dest = ''C:\app\oracle\admin\stby\adump'' comment= '''' scope=spfile
sql statement: alter system set dispatchers = ''(PROTOCOL=TCP) (SERVICE=stbyXDB)'' comment= '''' scope=spfile
sql statement: alter system set db_unique_name = ''stby'' comment= '''' scope=spfile
sql statement: alter system set db_file_name_convert = ''orcl'', ''stby'' comment= '''' scope=spfile
sql statement: alter system set log_file_name_convert = ''orcl'', ''stby'' comment= '''' scope=spfile
sql statement: alter system set control_files = ''C:\app\oracle\oradata\stby\control01.ctl'', ''C:\app\oracle\oradata\stby\control02.ctl'', ''C:\app\oracle\oradata\stby\control03.ctl'' comment= '''' scope=spfile
sql statement: alter system set fal_client = ''stby'' comment= '''' scope=spfile
sql statement: alter system set fal_server = ''orcl'' comment= '''' scope=spfile
sql statement: alter system set standby_file_management = ''AUTO'' comment= '''' scope=spfile
sql statement: alter system set log_archive_config = ''dg_config=(orcl,stby)'' comment= '''' scope=spfile
sql statement: alter system set log_archive_dest_2 = ''service=orcl LGWR ASYNC valid_for=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=stby'' comment= '''' scope=spfile
sql statement: alter system set log_archive_dest_state_2 = ''enable'' comment= '''' scope=spfile
sql statement: alter system set log_archive_format = ''stby_%t_%s_%r.arc'' comment= '''' scope=spfile
Oracle instance shut down
connected to auxiliary database (not started)
Oracle instance started
Total System Global Area     535662592 bytes
Fixed Size                     1334380 bytes
Variable Size                171967380 bytes
Database Buffers             356515840 bytes
Redo Buffers                   5844992 bytes
contents of Memory Script:
   backup as copy current controlfile for standby auxiliary format 'C:\APP\ORACLE\ORADATA\STBY\CONTROL01.CTL';
   restore clone controlfile to 'C:\APP\ORACLE\ORADATA\STBY\CONTROL02.CTL' from
'C:\APP\ORACLE\ORADATA\STBY\CONTROL01.CTL';
   restore clone controlfile to 'C:\APP\ORACLE\ORADATA\STBY\CONTROL03.CTL' from
'C:\APP\ORACLE\ORADATA\STBY\CONTROL01.CTL';
   sql clone 'alter database mount standby database';
executing Memory Script
Starting backup at 17-AUG-09
channel c1: starting datafile copy
copying standby control file
output file name=C:\APP\ORACLE\PRODUCT\11.1.0\DB_1\DATABASE\SNCFORCL.ORA tag=TAG20090817T150925 RECID=19 STAMP=695142585
channel c1: datafile copy complete, elapsed time: 00:00:15
Finished backup at 17-AUG-09
Starting restore at 17-AUG-09
channel clone_default: skipped, AUTOBACKUP already found
channel c1: copied control file copy
Finished restore at 17-AUG-09
Starting restore at 17-AUG-09
channel clone_default: skipped, AUTOBACKUP already found
channel c1: copied control file copy
Finished restore at 17-AUG-09
sql statement: alter database mount standby database
contents of Memory Script:
   set newname for tempfile 1 to
"C:\APP\ORACLE\ORADATA\STBY\TEMP01.DBF";
   set newname for tempfile 2 to
"C:\APP\ORACLE\ORADATA\STBY\CHECKUP_TEMP_1";
   set newname for tempfile 3 to
"C:\APP\ORACLE\ORADATA\STBY\CHECKUP_TEMP_2";
   switch clone tempfile all;
   set newname for datafile 1 to
"C:\APP\ORACLE\ORADATA\STBY\SYSTEM01.DBF";
   set newname for datafile 2 to
"C:\APP\ORACLE\ORADATA\STBY\SYSAUX01.DBF";
   set newname for datafile 3 to
"C:\APP\ORACLE\ORADATA\STBY\UNDOTBS01.DBF";
   set newname for datafile 4 to
"C:\APP\ORACLE\ORADATA\STBY\USERS01.DBF";
   set newname for datafile 5 to
"C:\APP\ORACLE\ORADATA\STBY\EXAMPLE01.DBF";
   set newname for datafile 6 to
"C:\APP\ORACLE\ORADATA\STBY\CHECKUP_DFLT.DAT";
   backup as copy reuse
   datafile 1 auxiliary format
"C:\APP\ORACLE\ORADATA\STBY\SYSTEM01.DBF"   datafile
2 auxiliary format
"C:\APP\ORACLE\ORADATA\STBY\SYSAUX01.DBF"   datafile
3 auxiliary format
"C:\APP\ORACLE\ORADATA\STBY\UNDOTBS01.DBF"   datafile
4 auxiliary format
"C:\APP\ORACLE\ORADATA\STBY\USERS01.DBF"   datafile
5 auxiliary format
"C:\APP\ORACLE\ORADATA\STBY\EXAMPLE01.DBF"   datafile
6 auxiliary format
"C:\APP\ORACLE\ORADATA\STBY\CHECKUP_DFLT.DAT"   ;
   sql 'alter system archive log current';
executing Memory Script
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
renamed tempfile 1 to C:\APP\ORACLE\ORADATA\STBY\TEMP01.DBF in control file
renamed tempfile 2 to C:\APP\ORACLE\ORADATA\STBY\CHECKUP_TEMP_1 in control file
renamed tempfile 3 to C:\APP\ORACLE\ORADATA\STBY\CHECKUP_TEMP_2 in control file
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting backup at 17-AUG-09
channel c1: starting datafile copy
input datafile file number=00006 name=C:\APP\ORACLE\ORADATA\ORCL\CHECKUP_DFLT.DAT
output file name=C:\APP\ORACLE\ORADATA\STBY\CHECKUP_DFLT.DAT tag=TAG20090817T151028 RECID=0 STAMP=0
channel c1: datafile copy complete, elapsed time: 00:02:55
channel c1: starting datafile copy
input datafile file number=00001 name=C:\APP\ORACLE\ORADATA\ORCL\SYSTEM01.DBF
output file name=C:\APP\ORACLE\ORADATA\STBY\SYSTEM01.DBF tag=TAG20090817T151028 RECID=0 STAMP=0
channel c1: datafile copy complete, elapsed time: 00:00:35
channel c1: starting datafile copy
input datafile file number=00002 name=C:\APP\ORACLE\ORADATA\ORCL\SYSAUX01.DBF
output file name=C:\APP\ORACLE\ORADATA\STBY\SYSAUX01.DBF tag=TAG20090817T151028 RECID=0 STAMP=0
channel c1: datafile copy complete, elapsed time: 00:00:35
channel c1: starting datafile copy
input datafile file number=00005 name=C:\APP\ORACLE\ORADATA\ORCL\EXAMPLE01.DBF
output file name=C:\APP\ORACLE\ORADATA\STBY\EXAMPLE01.DBF tag=TAG20090817T151028 RECID=0 STAMP=0
channel c1: datafile copy complete, elapsed time: 00:00:07
channel c1: starting datafile copy
input datafile file number=00003 name=C:\APP\ORACLE\ORADATA\ORCL\UNDOTBS01.DBF
output file name=C:\APP\ORACLE\ORADATA\STBY\UNDOTBS01.DBF tag=TAG20090817T151028 RECID=0 STAMP=0
channel c1: datafile copy complete, elapsed time: 00:00:03
channel c1: starting datafile copy
input datafile file number=00004 name=C:\APP\ORACLE\ORADATA\ORCL\USERS01.DBF
output file name=C:\APP\ORACLE\ORADATA\STBY\USERS01.DBF tag=TAG20090817T151028 RECID=0 STAMP=0
channel c1: datafile copy complete, elapsed time: 00:00:03
Finished backup at 17-AUG-09
sql statement: alter system archive log current
contents of Memory Script:
   backup as copy reuse
   archivelog like "C:\APP\ORACLE\PRODUCT\11.1.0\DB_1\RDBMS\ARC00067_0694541910.001" auxiliary format
"C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_%U_.ARC"   archivelog like
"C:\APP\ORACLE\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2009_08_17\O1_MF_1_67_58LLGDYR_.ARC" auxiliary format
"C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_%U_.ARC"   ;
   catalog clone recovery area;
   switch clone datafile all;
executing Memory Script
Starting backup at 17-AUG-09
channel c1: starting archived log copy
input archived log thread=1 sequence=67 RECID=119 STAMP=695142910
output file name=C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_ARCH_D-ORCL_ID-1222322644_S-67_T-1_A-694541910_2IKMU2G0_.ARC RECID=0 STAMP=0
channel c1: archived log copy complete, elapsed time: 00:00:01
channel c1: starting archived log copy
input archived log thread=1 sequence=67 RECID=120 STAMP=695142910
output file name=C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_ARCH_D-ORCL_ID-1222322644_S-67_T-1_A-694541910_2JKMU2G4_.ARC RECID=0 STAMP=0
channel c1: archived log copy complete, elapsed time: 00:00:01
Finished backup at 17-AUG-09
searching for all files in the recovery area
List of Files Unknown to the Database
=====================================
File Name: C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_ARCH_D-ORCL_ID-1222322644_S-67_T-1_A-694541910_2IKMU2G0_.ARC
File Name: C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_ARCH_D-ORCL_ID-1222322644_S-67_T-1_A-694541910_2JKMU2G4_.ARC
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_ARCH_D-ORCL_ID-1222322644_S-67_T-1_A-694541910_2IKMU2G0_.ARC
File Name: C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_ARCH_D-ORCL_ID-1222322644_S-67_T-1_A-694541910_2JKMU2G4_.ARC
datafile 1 switched to datafile copy
input datafile copy RECID=19 STAMP=695142923 file name=C:\APP\ORACLE\ORADATA\STBY\SYSTEM01.DBF
datafile 2 switched to datafile copy
input datafile copy RECID=20 STAMP=695142923 file name=C:\APP\ORACLE\ORADATA\STBY\SYSAUX01.DBF
datafile 3 switched to datafile copy
input datafile copy RECID=21 STAMP=695142923 file name=C:\APP\ORACLE\ORADATA\STBY\UNDOTBS01.DBF
datafile 4 switched to datafile copy
input datafile copy RECID=22 STAMP=695142924 file name=C:\APP\ORACLE\ORADATA\STBY\USERS01.DBF
datafile 5 switched to datafile copy
input datafile copy RECID=23 STAMP=695142924 file name=C:\APP\ORACLE\ORADATA\STBY\EXAMPLE01.DBF
datafile 6 switched to datafile copy
input datafile copy RECID=24 STAMP=695142924 file name=C:\APP\ORACLE\ORADATA\STBY\CHECKUP_DFLT.DAT
contents of Memory Script:
   set until scn 2080890;
   recover
   standby
   clone database
    delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 17-AUG-09
starting media recovery
archived log for thread 1 with sequence 67 is already on disk as file C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_ARCH_D-ORCL_ID-1222322644_S-67_T-1_A-694541910_2IKMU2G0_.ARC
archived log file name=C:\APP\ORACLE\FLASH_RECOVERY_AREA\STBY\ARCHIVELOG\2009_08_17\O1_MF_1_67_ARCH_D-ORCL_ID-1222322644_S-67_T-1_A-694541910_2IKMU2G0_.ARC thread=1 sequence=67
media recovery complete, elapsed time: 00:00:03
Finished recover at 17-AUG-09
Finished Duplicate Db at 17-AUG-09
sql statement: alter system archive log current
released channel: c1

Not able to connect in Oracle 11g

I have done the installation of oracle 11g...when i am using sql command line to connect i am getting an error "oracle initialization or shutdown in progress" what to do??
I have provided the username as 'system' and password as the one providede during installation.Plzz help.

Kumar_Jaga wrote:
It may be the case, the database did not stop correctly.
Or it could be that the shutdown is still in progress. Perhaps rolling back uncommited transactions. There simply isn't enough information to make an informed suggestion.
Try out following.
sql:> sqlplus /nolog
sql> connect sys/manager as sysdba
The 'as sysdba' makes the 'sys/manager' pointless. You could just as well 'connect fubar/thisisnotmypassword as sysdba'.
sql>shutdown immediate
And if the previous shutdown did not work or is waiting on something, this one surely will not succeed.
sql> startup
sql> exit
While startup it may show error message like some of the parameter is missing. Note down that parameter and update in initSID.ora file.
Unless of course he's not using initSID. Most databases don't, anymore.

Authentication did not succeed in Visual Admin On solution manager?

Hello friends,
   We are unable to log in in visual admin with j2ee_admin default connection. while log in we receiving authentication did not succeed error.
Please help me to solve this issue.
Regards,
Farkath C

Hello Friends,
   Still we are unable to login to visual admin using J2ee_admin user,
Please find the Security log,
If you find any idea to resolve this issue, Please help me.
#1.5 #001EC94523270053000001170000199000050333FB9C3FF5#1410896683295#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#SLDDSUSER#895##E7B8C5FD3DD911E4AF340000002B7B0E#e7b8c5fd3dd911e4af340000002b7b0e-0#e7b8c5fd3dd911e4af340000002b7b0e#SAPEngine_Application_Thread[impl:3]_23##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.OK
User: SLDDSUSER
Authentication Stack: sap.com/com.sap.lcr*sld
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT ok          false      false
2. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          true       true
3. com.sap.security.core.server.jaas.CreateTicketLoginModule               OPTIONAL    ok          true       true
Central Checks                                                                                                true                  #
#1.5 #001EC9452327004C0000011F0000199000050333FB9E05C9#1410896683405#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#SLDDSUSER#896##E7C9690F3DD911E481880000002B7B0E#e7c9690f3dd911e481880000002b7b0e-0#e7c9690f3dd911e481880000002b7b0e#SAPEngine_Application_Thread[impl:3]_29##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.OK
User: SLDDSUSER
Authentication Stack: sap.com/com.sap.lcr*sld
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT ok          false      false
2. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          true       true
3. com.sap.security.core.server.jaas.CreateTicketLoginModule               OPTIONAL    ok          true       true
Central Checks                                                                                                true                  #
#1.5 #001EC9452327004B000000EE000019900005033406875E27#1410896866503#/System/Security/Usermanagement##com.sap.security.core.persistence#J2EE_GUEST#0##54E022B53DDA11E48F670000002B7B0E#54e022b53dda11e48f670000002b7b0e-0#54e022b53dda11e48f670000002b7b0e#SAPEngine_Application_Thread[impl:3]_21##0#0#Info#1#com.sap.security.core.persistence#Java#User "{0}" is the communication user for the connection between User Management Engine and the ABAP backend system {1}. This user cannot log-on to the User Management Engine.##User "{0}" is the communication user for the connection between User Management Engine and the ABAP backend system {1}. This user cannot log-on to the User Management Engine.#2#J2EE_ADMIN#SLMCLNT100#
#1.5 #001EC9452327004B000000EF00001990000503340687960E#1410896866518#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#J2EE_GUEST#0##54E022B53DDA11E48F670000002B7B0E#54e022b53dda11e48f670000002b7b0e-0#54e022b53dda11e48f670000002b7b0e#SAPEngine_Application_Thread[impl:3]_21##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.FAILED
User: N/A
Authentication Stack: SAP-J2EE-Engine
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   SUFFICIENT ok          exception             true       Authentication did not succeed.#
#1.5 #001EC9452327004B000000F4000019900005033412BB19D3#1410897071292#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#SOLMAN_ADMIN#910##CEF7CEF83DDA11E498040000002B7B0E#cef7cef83dda11e498040000002b7b0e-0#cef7cef83dda11e498040000002b7b0e#SAPEngine_Application_Thread[impl:3]_21##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.OK
User: SOLMAN_ADMIN
Authentication Stack: sap.com/com.sap.lcr*sld
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT ok          false      false
2. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          true       true
3. com.sap.security.core.server.jaas.CreateTicketLoginModule               OPTIONAL    ok          true       true
Central Checks                                                                                                true                  #
#1.5 #001EC9452327005700000144000019900005033412BBC3C3#1410897071339#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#SOLMAN_ADMIN#911##CF03B6AC3DDA11E4A9C90000002B7B0E#cf03b6ac3dda11e4a9c90000002b7b0e-0#cf03b6ac3dda11e4a9c90000002b7b0e#SAPEngine_Application_Thread[impl:3]_34##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.OK
User: SOLMAN_ADMIN
Authentication Stack: sap.com/com.sap.lcr*sld
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT ok          false      false
2. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          true       true
3. com.sap.security.core.server.jaas.CreateTicketLoginModule               OPTIONAL    ok          true       true
Central Checks                                                                                                true                  #
#1.5 #001EC9452327008900000005000019900005033417E870E1#1410897158131#/System/Security##com.sap.engine.services.keystore####4EF963E63DAE11E4A2050000002B7B0E#4ef963e63dae11e4a2050000002b7b0e-0#4ef963e63dae11e4a2050000002b7b0e#Thread[ExRun:SMD_MGR_26,10,SMD_MGR:ExecTG]##0#0#Error#1#com.sap.engine.services.keystore#Java###Source: com.sap.engine.frame.core.configuration.NameNotFoundException: A file entry with the name "SMDAgent-cert" cannot be found in the configuration "keystore/TrustedCAs/entries".; Description: EntriesStorage - readEntry(SMDAgent-cert) in configuration [keystore/TrustedCAs/entries] failed with unexpected exception; Consequences: ; Countermeasures:check log for details##
#1.5 #001EC945232700500000012800001990000503341E810CD6#1410897268826#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#SM_INTERN_WS#918##001EC94523271EE48CE20FF9FB774D30#AC14008B0CDC54189574001F00000000-0#43DB3DE44884F13EB530001EC9452327#SAPEngine_Application_Thread[impl:3]_28##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.OK
User: SM_INTERN_WS
Authentication Stack: sap.com/tc~smd~ws~agent~monitoring*SMDAgentMonitoring_DataProvider
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT ok          false      false
2. com.sap.security.core.server.jaas.EvaluateAssertionTicketLoginModule    SUFFICIENT ok          exception false                 Received no SAP Authentication Assertion Ticket.
3. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   OPTIONAL    ok          true       true
4. com.sap.security.core.server.jaas.CreateTicketLoginModule               SUFFICIENT ok          true       true
Central Checks                                                                                                true                  #
#1.5 #001EC9452327007E0000011100001990000503341E81D7E9#1410897268873#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#SM_INTERN_WS#919##001EC94523271EE48CE20FF9FB774D30#AC14008B0CDC54189574002000000000-0#43DB3DE44884F13EB530001EC9452327#SAPEngine_Application_Thread[impl:3]_33##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.OK
User: SM_INTERN_WS
Authentication Stack: sap.com/tc~smd~ws~agent~monitoring*SMDAgentMonitoring_DataProvider
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT ok          false      false
2. com.sap.security.core.server.jaas.EvaluateAssertionTicketLoginModule    SUFFICIENT ok          exception false                 Received no SAP Authentication Assertion Ticket.
3. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   OPTIONAL    ok          true       true
4. com.sap.security.core.server.jaas.CreateTicketLoginModule               SUFFICIENT ok          true       true
Central Checks                                                                                                true                  #
#1.5 #001EC94523270053000001280000199000050334253E502B#1410897381878#/System/Security/Usermanagement##com.sap.security.core.persistence#J2EE_GUEST#0##DC2A72A83DDA11E4CB770000002B7B0E#dc2a72a83dda11e4cb770000002b7b0e-0#dc2a72a83dda11e4cb770000002b7b0e#SAPEngine_Application_Thread[impl:3]_23##0#0#Info#1#com.sap.security.core.persistence#Java#User "{0}" is the communication user for the connection between User Management Engine and the ABAP backend system {1}. This user cannot log-on to the User Management Engine.##User "{0}" is the communication user for the connection between User Management Engine and the ABAP backend system {1}. This user cannot log-on to the User Management Engine.#2#J2EE_ADMIN#SLMCLNT100#
#1.5 #001EC94523270053000001290000199000050334253E5151#1410897381878#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#J2EE_GUEST#0##DC2A72A83DDA11E4CB770000002B7B0E#dc2a72a83dda11e4cb770000002b7b0e-0#dc2a72a83dda11e4cb770000002b7b0e#SAPEngine_Application_Thread[impl:3]_23##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.FAILED
User: N/A
Authentication Stack: SAP-J2EE-Engine
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   SUFFICIENT ok          exception             true       Authentication did not succeed.#
#1.5 #001EC9452327008A00000102000019900005033431310D8E#1410897582354#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#SLDDSUSER#931##FF9A34B63DDB11E4BB010000002B7B0E#ff9a34b63ddb11e4bb010000002b7b0e-0#ff9a34b63ddb11e4bb010000002b7b0e#SAPEngine_Application_Thread[impl:3]_3##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.OK
User: SLDDSUSER
Authentication Stack: sap.com/com.sap.lcr*sld
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT ok          false      false
2. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          true       true
3. com.sap.security.core.server.jaas.CreateTicketLoginModule               OPTIONAL    ok          true       true
Central Checks                                                                                                true                  #
#1.5 #001EC94523270084000000FF000019900005033431329358#1410897582463#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#SLDDSUSER#932##FFAADBF23DDB11E4B6910000002B7B0E#ffaadbf23ddb11e4b6910000002b7b0e-0#ffaadbf23ddb11e4b6910000002b7b0e#SAPEngine_Application_Thread[impl:3]_6##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.OK
User: SLDDSUSER
Authentication Stack: sap.com/com.sap.lcr*sld
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT ok          false      false
2. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          true       true
3. com.sap.security.core.server.jaas.CreateTicketLoginModule               OPTIONAL    ok          true       true
Central Checks                                                                                                true                  #
Regards,
Farkath C

[java.sql.SQLException: Io exception: The Network Adapter could not establish the connection]

Hello,
I have recently installed Weblogic6.1Sp1 server with Weblogic Intergration 2.1
on solaris 7 and im getting this error when connecting to the database (oracle816.3);
I have changed Oracle drivers and tried many different configurations, with no
luck, Could someone give me some guidance or has anyone encounted this error before.
Thanks
Bobby
java.sql.SQLException: Io exception: The Network Adapter could not establish the
connection]
java.sql.SQLException: Io exception: The Network Adapter could not establish the
connection
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:210)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:323)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:260)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:365)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:260)
at com.bea.wlpi.rdbmsrealm.RDBMSDelegate.<init>(RDBMSDelegate.java:187)
at com.bea.wlpi.rdbmsrealm.RDBMSDelegate$DFactory.newInstance(RDBMSDelegate.java:1177)
at weblogic.security.utils.Pool.getInstance(Pool.java:57)
at com.bea.wlpi.rdbmsrealm.RDBMSRealm.getDelegate(RDBMSRealm.java:104)
at com.bea.wlpi.rdbmsrealm.RDBMSRealm.getUser(RDBMSRealm.java:145)
at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:806)
at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:670)
at weblogic.security.acl.internal.FileRealm.getPrincipalFromAnyRealm(FileRealm.java:1008)
at weblogic.security.acl.internal.FileRealm.ensureRequiredObjectsExist(FileRealm.java:957)
at weblogic.security.acl.internal.FileRealm.loadMembers(FileRealm.java:1202)
at weblogic.security.SecurityService.initializeRealm(SecurityService.java:274)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:390)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)

Hi. This is definitely an oracle-only problem, so you should simplify the problem
down to a small standalone program using the oracle thin driver to make a connection.
Once you get this to work, weblogic will also be able to do it. Make sure that
when you try to have weblogic succeed after you can do it with oracle code only,
that the driver you used to succeed with, is ahead of any weblogic jars in
the server classpath. Note that we ship a classes12.zip in our packaging, but
Oracle has since released a newer one (with the same name!) that has some bugs
fixed. Make sure the later one is the one the JVM will pick up.
Joe
Bobby wrote:
>
Hello,
I have recently installed Weblogic6.1Sp1 server with Weblogic Intergration 2.1
on solaris 7 and im getting this error when connecting to the database (oracle816.3);
I have changed Oracle drivers and tried many different configurations, with no
luck, Could someone give me some guidance or has anyone encounted this error before.
Thanks
Bobby
java.sql.SQLException: Io exception: The Network Adapter could not establish the
connection]
java.sql.SQLException: Io exception: The Network Adapter could not establish the
connection
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:210)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:323)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:260)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:365)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:260)
at com.bea.wlpi.rdbmsrealm.RDBMSDelegate.<init>(RDBMSDelegate.java:187)
at com.bea.wlpi.rdbmsrealm.RDBMSDelegate$DFactory.newInstance(RDBMSDelegate.java:1177)
at weblogic.security.utils.Pool.getInstance(Pool.java:57)
at com.bea.wlpi.rdbmsrealm.RDBMSRealm.getDelegate(RDBMSRealm.java:104)
at com.bea.wlpi.rdbmsrealm.RDBMSRealm.getUser(RDBMSRealm.java:145)
at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:806)
at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:670)
at weblogic.security.acl.internal.FileRealm.getPrincipalFromAnyRealm(FileRealm.java:1008)
at weblogic.security.acl.internal.FileRealm.ensureRequiredObjectsExist(FileRealm.java:957)
at weblogic.security.acl.internal.FileRealm.loadMembers(FileRealm.java:1202)
at weblogic.security.SecurityService.initializeRealm(SecurityService.java:274)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:390)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)

IPSec timeout: "ERROR Hybrid auth negotiated but peer did not succeed Xauth

I'm using the Cisco IPSec VPN client on the iPad to connect a Linux server running racoon.
Initially the connection works fine but after a while it stalls completely due to a timeout.
Linux box logs:
13:18:00 Linux racoon: ERROR: Hybrid auth negotiated but peer did not succeed Xauth exchange
13:18:00 Linux racoon: ERROR: Attempt to start phase 2 whereas Xauth failed
13:18:03 Linux racoon: ERROR: Hybrid auth negotiated but peer did not succeed Xauth exchange
13:18:03 Linux racoon: ERROR: Attempt to start phase 2 whereas Xauth failed
iPad logs:
13:17:55 Pad racoon 719 <Info>: 719 INFO: initiate new phase 2 negotiation: 192.168.1.100[0]<=>x.x.x.x[0]
13:17:55 Pad racoon 719 <Info>: 719 INFO: NAT detected -> UDP encapsulation (ENC_MODE 1->3).
13:18:25 Pad racoon 719 <Info>: 719 ERROR: x.x.x.x give up to get IPsec-SA due to time up to wait.
Server-side racoon config:
remote anonymous
passive on;
exchange_mode aggressive,main;
my_identifier fqdn "xxxxxxxxx.xxx";
generate_policy on;
nat_traversal on;
mode_cfg on;
xauth_login "ipsecvpn";
script "p1updown" phase1_up;
script "p1updown" phase1_down;
#dpd_delay 20;
#dpd_retry 5;
#dpd_maxfail 5;
#dpd_algorithm dpdblackholedetect;
initial_contact on;
lifetime time 24 hour;
proposal_check strict;
proposal {
encryption_algorithm aes 256;
hash_algorithm sha1;
dh_group 2;
authentication_method xauthpskserver;
# authentication_method presharedkey;
mode_cfg
# auth_source pam;
auth_source system;
auth_throttle 3;
auth_source system;
save_passwd on;
conf_source local;
accounting system;
network4 10.8.1.2;
netmask4 255.255.255.0;
pool_size 255;
dns4 10.8.1.1;
# default_domain "xxxxxxxxx.xxx";
# split_network include 10.8.0.0/16;
# split_dns "xxxxxxxxx.xxx";
pfs_group 2;
sainfo anonymous
lifetime time 12 hour;
# lifetime byte 50 MB;
encryption_algorithm aes, blowfish;
authentication_algorithm hmac_sha1 ;
compression_algorithm deflate ;
pfs_group 2;
# EOF
iPad fw: 3.2.1 (same problem also with 3.2.2)
Any ideas?

Re-keying issue? I dunno. The manual mentions Phase 1, and your log points to Phase 2, but maybe it's worth a shot.
"Re-keying of Phase 1: Not currently supported. Recommend that re-keying times on
the server be set to approximately one hour."
Incidentally, how do you get logs off of the iPad?

Connection Pooling : Network Adapter could not establish the connection

Hi,
We have a client-server application wherein the server has a pooled connection to an Oracle 10i database. The application is developed in Java and we are using Oracle OracleConnectionCacheImpl API to manage the connection pooling( DYNAMIC pooling with a pool size of 5 and we are using ojdbc14.jar)
On certain occasions when activity is extremely high, the server attemtps to retrieve around 2 million datasets/records. The connection pool runs out of connections and we get the following error :
com.indigo.utils.DBEngineException: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at com.indigo.zclasses.DBTradingSource.getConnection(DBTradingSource.java:136)
at com.indigo.zclasses.DBTradingSource.getTicketMessages(DBTradingSource.java:8033)
at sun.reflect.GeneratedMethodAccessor749.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.indigo.basketserver.ServerSideUtil.ConfigUtil(ServerSideUtil.java:88)
at com.indigo.basketserver.RemoteServerImpl.ConfigUtil(RemoteServerImpl.java:543)
at sun.reflect.GeneratedMethodAccessor17.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
at sun.rmi.transport.Transport$1.run(Transport.java:153)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:334)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:418)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:521)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:325)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:140)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:171)
at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPhysicalConnection(OracleConnectionPoolDataSource.java:149)
at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:95)
at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:63)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getNewPoolOrXAConnection(OracleConnectionCacheImpl.java:547)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getPooledConnection(OracleConnectionCacheImpl.java:404)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:298)
at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:268)
at com.indigo.zclasses.DBTradingSource.getConnection(DBTradingSource.java:127)
This is happens in Production and despite our exhaustive efforts,we have been unable to reproduce it in our Testing environment so far.
A large number of login attempts are seen in the Oracle login monitoring table, around 50,000 but we dont think that should be an issue. At the time, when this problem occurs, there are other processes making connection to the DB without any issues. Also, after sometime, the connection is restored and no exceptions are thrown.
Any insight into how we could simulate,resolve or monitor this issue would be greatly appreciated.
Thanks,
Zuber

Hi. This a long-known issue, and is caused by the DBMS listener's incoming
request buffer becoming overloaded by many simultaneous connection
requests. It will fail some of them. I have seen this with a simple java
program that calls Driver.connect() identically 20 times in a tight loop.
Some of the calls will fail in this way, while others will succeed. The
solution BEA's pool has, is to have a delay option to have the thread
sleep a bit (half-second to a secod or so) between successive connection
requests. After that, don't close connections until they're broken. Keep
them and re-use them.
HTH,
Joe Weinstein at BEA Systems

Reporting Services not able to connect with sharepoint

HI
We have a Sql server instance where we are not able to install reporting services, so what we have done is we have created one more sql server instance on the same server with reporting services.
When we configured reporting services in sharepoint integrated mode and try to connect that web service url in sharepoint we are getting an error in sharepoint central administartion that not able to connect to the reporting services.
Request you to throw some light on the same.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Hi Geeth,
Based on the limited information, I am not very clearly about you issue. In order to solve the problem more efficiently, I need to clarify some information. Could you post more detail information about “try to connect that web service url in sharepoint we
are getting an error in sharepoint central administartion”? For example, the detail steps about the action, the screenshot of the action, and what error message you received. I’m not sure which step are you trying to do. And could you tell me the edition of
your SQL Server and SharePoint? It is benefit for us to do further analysis.
References:
2008 R2:
http://technet.microsoft.com/en-us/library/bb283190(v=sql.105).aspx
http://sharepointtaskmaster.blogspot.in/2010/11/intergration-reporting-service-with.html
http://technet.microsoft.com/en-us/library/bb326213(v=sql.105).aspx
2012:
http://technet.microsoft.com/en-us/library/47efa72e-1735-4387-8485-f8994fb08c8c
http://denglishbi.wordpress.com/2011/07/22/configuring-sql-server-denali-reporting-services-sharepoint-2010-integration/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I am not succeeding in connecting my I pad to my printer

Similar Messages

Maybe you are looking for