I am not sure if this is the place to complain about new update iOS7, since update I can't read or see well text or numbers , thin text blurry backgrounds and difficult to use touch with fine control buttons

While this new update looks futuristic, I am very confused with layout, navigation and texting

However, after several hours of readjusting settings
and finding ways to hold device so natural light does not bounce on it the problem got easier to manage.
Here are my suggestions:
In settings
Wallpaper and Brightness
Change Home Screen to Black Color
In General go to Accessibility
Vision
Change text size and turn on Bold
Increase Contrast n turn on
Reduce Motion in my opinion, letters are less skittish/ cartoon type
Under Physical n Motor Adjust Switch Control Options
Pointer size and color choices help
I also find holding the device further way from face
helps glare
Truly the layout for day time reading is extremely poor
Night time reading in the dark much improved
My last suggestion is to send Apple feedback apple.com/feedback
hopefully after they read the complaints they will make changes
I hope this helps a little
Personally prior to iOS 7 I was glued to my phone and iPad
It was getting addicting
The iOS update has been a quick cure LoL
10 min and I'm blind and sick to my stomach looking at
The screen
I sent my feedback I hope you do the same

Similar Messages

Newbie on crystal reports, not sure if this is the place to post

Post Author: bluejay
CA Forum: Data Connectivity and SQL
Hi, I'm new with crystal and was wondering if anyone know how to connect crystal to salesforce. I tried to connect salesforce by creating a new connection. When I put in the salesforce userID and password, i got an error message saying that the logon failed and to check my login and password. I've verified my login and password repeatedly via salesforce. I'm not sure what the connection issue is, can anyone help?? Thanks!

I agree, 110%, I would much rather purchase either Apple or Mac native software but the offerings are limited. I have been using Macs since the late 80's and I always have tried to buy Apple softwrare first. I still haven't pulled the trigger yet on anything but sadly it doesn't seem anyone in the Mac world has anything that can compete with the Sony software.
One of my reasons for doing this is to be able to get HD content to burn to Blu-Ray which is another problem. Finding a burner to work with my Mac(s) is hit or miss. I know I can't be the only person who wants to do this. Clogging up my hard drives with all this video is not what I want. Burn to dsc and store it until I want to watch it is my thinking. And plus I can then take the disc(s) to someone elses house and they can watch it without any problems.
Anyone with any fisrt hand experience with what external Blu-Ray burners might work with my Mac Mini, running Snow Leopard 10.6.8, would also be appreciated!
Thanks, again for everyone's input!

NEWBIE NEEDS HELP - NOT SURE IF THIS IS THE PLACE FOR THIS BUT

Does anyone know where I can get an application that creates downloadable files like zip files - preferably that can be used for Mac or PC? I know WinZip or something does it but is there one for Mac?
Contact me at [email protected] if you can help. Thanks

Here is a link that will take you to Allume Systems. Check out "Stuffit Deluxe", a highly flexible application that will let you compress and expand many formats for both Mac and PC platforms.
One note of caution: I and others have had problems with using the "background" apps that come with the package. Both compressing and expanding have always been flawless for me. I consider Stuffit a must have on my machines and have had had it since the late 1980's.
http://www.allume.com/mac/index.html
Hope this helps.
-Joe

Not sure if this is the place to ask this

but the board is what i have. i have 3 slots for memory. all have 256 mb ddr in them. is this dual channel. every thing i have done says it is. 12 and using 3 and 2 using 3. now i have ran tests and it s it is in dual channel mode. but ihave some that say it cant be. so is there anyone that can give me the word on this?

For dual channel you need it in slots 1&3 or 2&3 but 1&2 is not dual channel. Now i heard from a mod that if you had all 3 slots populated with 256meg each then 512megs of ram would be in dual channel but 256megs would not be.

Hi everyone, not sure if this is the right forum to ask this question, however any redirect is appreciated. Where can I get the download for the latest old mozilla browser. The one with the dinosaur icon before the browser turned firefox. Thanks, Jen

Hi everyone
Not sure if this is the right forum to ask this question, however any redirect is appreciated. Where can I get the download for the latest old mozilla browser. The one with the dinosaur icon before the browser turned firefox. Thanks, Jen

Phoenix and Firebird were what Firefox was called before Firefox was settled on in 2004, and both used "birds" as the logo. IIRC, the dinosaur was used in the Mozilla Suite.
Here are the earliest versions of the Mozilla Suite. <br />
http://ftp.mozilla.org/pub/mozilla.org/mozilla/releases/
I hope this request for a historical purposes of where Mozilla came from, because those old versions aren't safe to use on the internet any longer.

Not sure if this is the right place...Recovery or Finding missing files

Hi,
Again, not sure if this is the right place to ask, but its worth a shot.
so i've been transcribing video all day using microsoft office for mac, and was saving the project (i thought) to an external hard drive. at one point the HD came unplugged, and i plugged it back in. no big deal. i continued to save, to type, save, type, etc until finished. so when i finished and saved the project, seemed okay. when i closed word, it kept asking me if i wanted to save changes...i said yes, and it would just ask me again, did this a few times. i assumed it was asking me to save it to a new location, which i didn't think i needed so finally said no.
i then find out that somehow when the HD was unplugged it erased Words ability to save to said location. so my last save was really before the HD was removed, which is odd, because i kept saving and never was prompted the path was interrupted or anything.
so my question is two part...
1. where would i find in the depths of the computer the saved files? if i was saving, they had to have gone somewhere, but i dont know how to find them.
2. also, assuming it wasnt saving, my word prefs say it autosaves every 5 minutes, so those files must exist somewhere also, yet can't find them...
does this make sense, can anyone help me?
thanks
austin

Hi there,
In Finder, select Go menu>Go to Folder, and go to "/volumes".
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists.
See if it may be in one of those with a 1 or 2 added to it.

Crackling audio (not sure if this is the "same" problem)

I have been experiencing crackling audio under certain circumstances with my Soundblaster X-Fi XtremeMusic. I am no audio expert, but it seems to me that the problem occurs when multiple?"types" of audio are played at the same time. For example, in a game, when voices are played over pre-existing background music, the audio on the voices will get crackly and staticky. This is recreatable in GTA4; that game uses a third-party interface (Microsoft Li've) to track game progress and post updates inside of the game. The game's internal audio is fine, but any sounds "inserted" into the game by Microsoft Li've will be all crackly because they seem to be "competing" with the existing sound effects from the game. It gets really annoying at times.
The "trigger" for this issue?was when I upgraded to a newer NVidia driver for my 7950GX2 graphics card. My sound was fine for years until I updated the driver to 72.xx and newer. However, I am not just talking about the newest driver. This has been happening since June and continues to happen with every NVidia release since then. This happens with every driver beyond 72.xx and now I am using 80.xx. Reverting drivers back to pre June 2008 is most definitely not an option, because I play current games and I update NVidia drivers on a weekly basis as new ones are released.
When the new X-Fi driver came out, I thought finally this problem would be resolved. However, the new driver did nothing to resolve the problem at all. I have tried all versions of the X-Fi driver from 2004 to the present. Nothing fixes the problem.
Suggestions are welcome... :smileyindifferent:

FRe: Crackling audio (not sure if this is the "same" problem)? Hi, I used to post in these forums a couple of years ago, after an Audigy 4 literally corrupted my hard disk and nearly killed my motherboard's SATA controller.
Anyway, after a lot of debate etc. it turned out that post-Audigy Sound Blasters, including X-Fis, are extremely sensiti've to PCI timing issues and have horrible bus mastering themselves, something which was NEVER quite fixed and keeps popping up time and again. In the best of cases you will get static, in the worse cases you will get BSODs, corrupted data, or even actual damage to the hardware. Not much you can do, really, than putting up with it, like many other users before you did.
P.S.: I'm sure that shortly after this post, a certain user will chime in and start raving about how most chipsets and RAM modules are garbage, and how he uses a super-duper "golden pick" reliable system with a chipset that does everything "nice and slow" and super-reliably and ofc works wonders with ANY "problematic" CL card to date,? and how it's not really CL's fault but that of the garbage mobos, chipsets, ram etc.

Not sure if this is the cam...

Well I got my new Webcam NX and I've found out on programs where i'm able to see other peoples webcams, it decides not to load theirs, usually says cannot connect. MSN is the only one i've tried that works but Eyeball and Camfrog do not, it used to work and i'm not sure what i've done to make it not work. Like I said i'm not sure if this is the fault of the cam or not, just thought I would ask. I use Windows 2000 by the way if that helps.

Does your cam load okay on their screen? If it's just the case that their camera doesn't appear on your screen, then it probably isn't related to the webcam, but rather the software or something related to the graphics card's drivers/codecs.
Cat

Changing date information (not sure if this is the right version)

Hi guys,
I'm not sure which version of iPhoto I'm using. It came by default with my MacBook Pro a year and a half ago, so perhaps someone whose switched on to those things will know which version that is.
The problem is that I recently added a group of pictures to iPhoto that have the wrong date on them. Apparently the camera was set to January 2007. This now means that these photos are in the wrong order in the library. How do I re organise the files so that they appear in the right order (i.e. at the bottom)? I've already tried highlighting all of the pictures, cliking 'batch change', and changing the date, but that only changes that date that they were added, which doesn't seem to change the order. Is there some sort of re organise button I need or something similar? Is there a way to change the date that the pictures were created? This is really only a small thing, but it is annoying all the same. All help is greatly appreciated.

iPhoto Menu -> About iPhoto
will tell you which version you have. It's important because the solutions vary according to the version.
Regards
TD

AME - not sure if this is the right way to proceed

I'm not sure where to post this or if AME is even the right place to start. However, if you point me in the right direction, I'll take your advice and move right along.
I am one step shy of a novice. Please understand and respond accordingly.
I have been given a task to complete a video for a conference. I am receiving video footage from all over the place and in all kinds of formats. I am using Adobe Premier Master Suite CS4 Windows 7 64 bit. My pc is more than suitable - exceeding all Adobe standards and built by an Adobe recommended vendor. I have no problems with the pc when working with DV tape. I use it all the time creating all types of projects.
The project is SD 720 x 486. The output will be to DVD. NTSC, not PAL.
I have recieved so far....
.mod 1280 x 720
.mod 720 x 480
.mpg 640 x 480
.avi 720 x 576
.avi 1920 x 1080
.avi 720 x 480
I've even received Hi-8 tape!
Most everything else is DV tape and I'm having absolutely no problem capturing, editing, etc etc Everything here works just fine. Audio - great. Video - great. Yes I'm importing the files via firewire. Wish everything else were so simple!
So, is there a reference that I can use to find out how to "convert?" all these things to a standard SD 720 x 486 .avi file that Adobe will love and cherish?
Thanks for reading all of this. Hope someone can help me.

Thanks
I didn't think so but I didn't want to mess up the Touch.

Videos from websites wont show up....not sure if this is the right forum.

Videos wont show up from any websites.
The place where a video would be just isnt there.
Music from myspace will not play as well.
Any suggestions?

I experienced the same thing with my Safari after the 10.4.11 upgrade. However, the following procedure worked for me:
Go to - System Preferences > QuickTime
then click on the 'Streaming' tab. Make sure the Enable Instant-On is checked. Set it to Play immediately. Re-start Safari. Videos should now work.
Somehow after the upgrade, the streaming setting on my safari was set to a long delay. Thats probably why the video wasn't showing.
Hope this helps.

New Imac - not sure if this is the right thread, sorry!

Hi there, my mother has just purchased a new Imac, (not sure which one sorry) and it is missing IMovie, although it seems to have all of the other i life applications...I have searched applications and hard drive, but it does not seem to be there - any ideas??? Thanks in advance.

It should be installed. If it got deleted accidentally, find Disc 1 of the discs that came with the Mac.
On the disc, there should be a link for +Install Bundled Software Only+. Double-click that icon to launch Installer. Go through the initial screens, and click the Customize button when it comes up. De-select (uncheck) everything except for iMovie HD.
Then click the Install button.

Not sure if this is the right place but......."noisy iMac, whats the deal?"

Hey,
I had recentely been having problems with my first gen iMac G5 (distorted video, noisy fans e.t.c), but after sending it in for repair ,courtesy of Apple Extention Repair Program, I am still having problems. I don't get the distorted video anymore but I am still getting the noise coming from my computer. Should this all have been taken care of when I put it in for repair or is the noise a seperate issue? Also, is there anyway I can fix this because it is driving me crazy?!?!?!
Thanks
Ian

Since it was in for repair, I certainly would have mentioned it to the techs when I brought it in.
There is no way for you to fix it, as the parts are no longer considered user serviceable.
Since you just sent it in, I would call them and tell Apple that you are still having noise issues and see what they will do.

I'm not sure if this is the right place to post this question...

The hard drive icon has mysteriously disappeared off of my desktop and I have NO CLUE how to get it back! I also added another hard drive and that icon as well, does not show up on the desktop. If I load a cd in the drive, it will show up - but my hard drive(s) won't.
HELP!!!!
G4 Mac OS X (10.4.8)

Try this:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Not sure if this is the correct forum but...

i'm wondering if i am able to sync a blackberry to my macbook without to much fuss?

In August I bought Macbook. I tried using Pocketmac with my BlackBerry Curve 8330 but I had all kinds of trouble. After many many hours working with their tech support, I could never get it working.
So I bought Missing Sync for BlackBerry. It works great! It doesn't due wireless syncing with Bluetooth though (neither does Pocketmac).
I can use my BlackBerry as a Bluetooth modem for connecting to the Internet.

I am not sure if this is the place to complain about new update iOS7, since update I can't read or see well text or numbers , thin text blurry backgrounds and difficult to use touch with fine control buttons

Similar Messages

Maybe you are looking for