I am on PC, Windows 7, Graduated filter in LR5 has lost its pin, and Grid lines. Also no done button. Any ideas?

Any help much appreciated

To get 'Done' back, hit the T key.
To get your pin back, hit the H key.
Hal

Similar Messages

  • I'm running Windows 7 on a laptop & Firefox has lost its Menu Bar for Firefox. It says it's turned on, but I can't see it. I have googled various options to try & get it back, but nothing works.

    I am running Windows 7 on a laptop and I have lost my Menu Bar for Firefox. It says it's turned on, but I can't see it. I have googled various options to try & get it back, but nothing works. Any suggestions would be appreciated...

    Downloaded Mozbackup & backed up all bookmarks, extensions, passwords (not settings)
    Uninstalled Firefox completely (Using REVO Uninstaller)
    Reboot
    Re-install Firefox
    ...Ran MozBackup & restored profile
    Woo HOO !!
    The problem was an add on: Hide Caption Titlebar Plus
    Once I uninstalled that - the menu returned
    Thanks for your support anyway

  • I have a new Dell computer running windows 7 and am unable to download itunes. The message I recieve after trying to run the download is: This installation package could not be opened. Verify that the package exists and that you can access it.   Any ideas

    I have a new Dell computer running windows 7 and am unable to download itunes. The message I recieve after trying to run the download is: This installation package could not be opened. Verify that the package exists and that you can access it.   Any ideas?

    Hello tcampbell1549,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Have a nice day,
    Mario

  • Lost my Pin Marker & Parellel lines in Graduated Filter-HELP!

    I'm a bit new to Lightroom and have suddenly lost the Pin marker icon and Parellel lines in the Graduated Filter tool.
    What I have in it's place is a "cross" icon and no parellel lines...however it does perform the function but with little contro.
    What do I do?

    That was it!
    Thankyou so much, I thought I was going crazy and would have to reinstal it.
    Nice when life works out so simply

  • EA3500 - Windows was unable to connect... (Win 7 and Win 8.1 have done this off and on)...

    I recently purchased a Linksys EA3500 router and am using it as the sole router in my home network.  I have primarily had three devices connected to the network computers/tablets -  two running Win7 and one running Win8.1.
    The first few days were OK but then the Win 8.1 system would not connect to the network (see the error message below).  "Windows was unable to connect..."  I tried the problem troubleshooter, power cyclilng the comptuer, power cycling the router.  Updating the router firmware to the latest (it added a .1 at the end).  Uninstalling and reinstalling wireless drivers on the computer.  I've reset the router to factory defaults.  I've run the router with and without wifi passwords. 
    This morning I was able to connect the Win 8.1 system to the network.  Not sure what changed overnight.  However, today I have had two instances of a different computer, one of the Win 7 systems, suffering the same problem.  Different hardware.  The Win 8.1 system is an Asus T100 tablet/netbook using a Broadcom 802.11abgn Wireless SDIO Adapter.  The Win 7 system is a Dell E6540 laptop using a Dell Wireless  1506 802.11b/g/n 2.4 GHz adapter manufactured by Atheros Communications, Inc.
    Last night, when I was having problems with the Win 8.1 system, I should note that it worked fine with the 5 GHz network.  The laptop, however, does not support 5 GHz and now that it's suffering the same problem my only work-around is a cellular hotspot.  
    I'm suspecting the router at this point.  Has anyone else seen this?  Any ideas what could be causing it, what I could do to fix it or what I might do to help diagnose the problem(s) ?  I'm more than willing to run third-party software to analyze and better understand what is happening on a network level (I would actually like to understand as much as anyone is willing to get me started on).  
    If I am unable to determine why certain systems almost seem to become "banned" from my network while others are working just fine then I'm going to have to return this device and try something else.  
    Thanks, 
    Dave
    I recen

    Hi @daved31,
    You are on the right track. Checking the Wireless MAC Filter is one of the troubleshooting steps. For 2.4 GHz frequency, the suggested channels are 1, 3, 6, 9 and 11. For the 5 GHz, I suggest to use the highest channel. Those channels will give you a better signal, just make sure that no other wireless device is using it to avoid wireless interference.
    If only one wireless device is not connecting wirelessly, we should focus on the wireless device itself because we know that the router/access point is working since the other wireless devices are working wirelessly.
    I suggest to delete preferred networks on the laptop. Here's the link that may help: http://kb.linksys.com/Linksys/GetArticle.aspx?docid=85537a14b0214be48217c733bba9ac65_Removing_Wirele...

  • My ipad is recognised as a camera when connected to my computer running on Windows XP. When my ipad has photos on it and I connect it to my computer it is initially recognised as a camera before my computer crashes.

    When my ipad has photos on it and I connect it to my computer it is initially recognised as a camera before my computer crashes. Resulting in me having to reboot the system again and going through the disc checks to resolve errors. This has happened on several occasions. On previous occasions when I have not had any photos on my ipad it has connected to my computer without any problem.Is there a way of solving this problem without having to remove all of my photos from my ipad.

    Being recognized as a camera is normal. Your computer sees the DCIM folder and doesn't know the difference between a 'real' camera and an iPad.
    One way to stop it could be to tell windows explorer what to do. When you plug your iPad in do you see a little pop up window listing things to do with the device? If so, there should be an option to 'do nothing', which means you tell your computer 'hey, ignore this device'. Your iTUnes will still work when you connect them, the windows protocols that search for images, etc. should just let it be and hopefully stop the crashing.

  • I tried to install Icloud on my windows 8 touch PC and it stops at the end and say there is an error.. any Ideas?

    I tried to install icloud on  my windows 8 touch PC and it stops at the end and says Error? Any Ideas what is wrong?

    This is all I could find: http://support.microsoft.com/kb/2643995

  • Getting error and cannot download itunes.  says there is a problem with the windows installer package. a program required for the install to be complete could not be run.  any ideas?

    getting an error downloading itunes 64bit for windows 7.  says there is a problem with the windows installer package.  a program required for the install to be complete could not be run.  any ideas?  i uninstalled it last night when it would not open.

    Just in case, let's try a standalone AppleSoftwareUpdate.msi install.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
    Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.)

  • TS1538 In Windows Vista my iPod Touch is recognised as a stills camera and the driver will not install.  Any ideas?

    Any advice on how to overcome this prob;lem would be appreciated.  I have followed the steps suggested by the online Apple Support without success.

    Have you tried everything here:
    iOS: Device not recognized in iTunes for Windows
    including:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Tried another cable
    Tried another computerto help determine if yo have an iPod or computer problem.

  • Just bought 4th Gen.iPod shuffle from Amazon.  My computer (Windows 7) wont recognise device, neither does iTunes.  Have reinstalled iTunes, and nothing seems to work,  Anyone have any ideas.

    Just bough 4th Generation iPod Shuffle from Amazon - comp;uter doesnt recognmise device, neither does iTunes.  I have re-installed iTunes, re-started Computer but nothing seems to work.       I have a 2nd generation iPod shuffle and that is recognised by computer.  Anyone have any suggestions - I am at my wits end.

    There is a USB printer connected to the back port of the PC. The mouse and keyboard are both PS/2.
    I did attempt to reinstall the USB root drivers. After uninstalling iTunes and all the other apple software packages included, I uninstalled everything USB in Device Manager, then rebooted the PC to let Windows reinstall it all.
    Reinstalling the OS -might- fix the issue, but if that were the case, it's most likely just a software conflict that can easily be fixed if I can manage to narrow the specific conflicts down. I've already essentially disabled everything with MSCONFIG except for Apple stuff, so I'm at a loss as to where to go. I've attempted the 5 Rs and all that as well, none of it seems to do the trick. I also cleared the temp folder multiple times (once per each iTunes uninstall / reinstall following the support site directions of uninstalling all the extra apple software) as well as attempted restarts of the Apple services.
    One oddity I would like to point out is that if I attempt to restart the iPod service through services.msc, it will not restart. It throws the error message of "the service failed to respond in a timely fashion" or whatever. I instead have to use the windows Task Manager to manually kill the iPod process in the processes list.
    I just now removed the USB printer and plugged the shuffle into the same port, but I receive the same error message in iTunes about the iPod being corrupted and it needing a restore. If I push restore, the software gets stuck in an endless loop. There are no other USB devices attached to this computer, the motherboard drivers are fully up to date from nVidia's website, and other USB devices clearly function just fine (USB memory sticks, USB printer, etc). If I use the Diagnostics option under Help in iTunes, it will claim there is no iPod connected, and, again, the iPod still does not show up in Windows Explorer under My Computer as an attached device, nor does it show up in Disk Management as a mounted partition.

  • I am transcribing interviews of WWII veterans sent to me via Dropbox into Windows running on my MacBook Air.  All words are distorted so this is very timeconsuming. Any ideas that are free?

    I am a volunteer transcriber for WWII veterans giving their histories. The interviews are recorded somehow using Windows and they are very distorted when I use the Windows program loaded on my MacBook Air. Is there anything I can adjust on my Mac that would make the interviews I receive clearer. We use Express Scribe to listen to the interviews sent to us from a central location.

    What file format are the recordings saved in?

  • Starting Firefox I get the "Send Error Report" popup window. It states "firefox.exe has encountered a problem and needs to close."

    This just started today. Everything seems fine. I just push the popup off to the side and continue to use the browser. If I were to click on the, "Send Error Report" or the "Don't Send" buttons then Firefox just closes!
    Strangest thing yet, trying to figure it out!
    Oh, I tried the reboot without add-ons! Even did the reinstall, still the same???

    Just got back online, still working on things, BUT ???
    I went back and dumped Norton's which I get for free from Comcast. I downloaded the AVG scanner. Went through all the bells & whistles and things seem ok ???? But I haven't done the reboot yet, so will do that soon. But I wanted to drop a line here and let you all know what is happening.
    And Thanks Fred, the funny thing was it did seem to have something to do with their update??? I do like Norton's but my son uses this AVG and he said it was better, lol!!! But again, everyone has their favorite!
    Mine is Norton's so once I confirm that everything is good, I'm going to try redoing Norton's and I'll try your suggestions, if they don't fix it!!
    Thanks again, and will let you know if this is the fixed!!!

  • Windows media plugin doesn't work at all in FF4 and both realmedia and quicktime plugins only function partially. Any idea what causes this or is there a fix in the tube?

    When trying to play embedded WMA absolutely NOTHING happens. An error message saying there's a problem with the quicktime plugin appears, when encountering embedded quicktime, but it dissapears before I can press "more".
    As for realmedia I have to reload page 2-3 times before it works.
    And all plugins are up todate

    Cycle count is on the high side, but condition is normal.
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • Look..i really want to add rotating wallpaper like window 7 can do on desktop i my iphone but..my iphone is first generation..any idea how i want to do that?

    do you have answers for my question?/

    I don't believe that can be done I'm afraid.

  • Has the width and colour of the graduated filter changed in Lightroom 5.4?

    Hi,
    Has the width and colour of the graduated filter changed in Lightroom 5.4? The 3 lines seem to be too narrow, almost a hairline, and not white enough. I can barely see them on a calibrated monitor and did not have that problem before upgrading to Lightroom 5.4.
    Thanks for your help.
    Kind regards,

    Ok, je vois où pourrait se situer le problème....
    Il faut baisser la luminosité de cet écran, le mieux est de mettre la luminosité à 50% et de calibrer cet écran avec une sonde, par exemple une Syder4pro ou une autre !
    OK, I see where could be the problem...Lower the brightness of the screen, the better is the brightness to 50% and to calibrate this monitor with a probe, for example a Syder4pro or another!
    Best regards
    Yves/CH

Maybe you are looking for