I am only seeing an Apple logo on the screen even after restarting.
So, my son usually is watching netflix on his AppleTV and comes to tell me from time to time that Netflix isn't playing the videos since the beginning. We unplug or reset and everything is fine. Also if my TV goes to standby from inactivity after the AppleTV turns off, turing the AppleTV on wake up the TV. Well lately when the TV wakes up, it doesn't see anything from the AppleTV. Tonight my son comes out to tell me all he sees is the apple logo on the screen. I think it is updateing, nope. I do everything from unplugging and reset. Nothing helps. I unplugged for a while to cool it off, no help. I am kind of mad that I hadn't looked up the warranty earlier cause it expired 8 days ago. The reason I didn't really think there was too much of a problem when it wasn't showing picture a few times, is because I have had kind of problems with it before due to software issures. So, is this the "apple of death" sign?
Are you near an Apple store? If so make a Genus appointment and take it in.
If you have a micro USB to USB cable you could connect it to your computer to see if iTunes sees it.
Message was edited by: bobbyco57 to correct USB cable type.
Similar Messages
-
HT201274 why is it i can only see an apple logo on my phone.?please help
why is it i can only see an apple logo on my phone.?please help
Try this Hold down home button and power button at the same time while connected to itunes
-
My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?
Hey rulosrojos,
The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
iPod nano (6th generation): Hardware troubleshooting
https://support.apple.com/en-us/TS3474
Sincerely,
Allen -
I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help . I have tried to reset even by pressing sleep and home button but it could not help. Please suggest. Still i have connected for charging .
Sounds like you have corrupt backup data, if this occurs from one phone to another. Try restoring the phone as a new device, without a backup. Try using for a day before installing any other apps, etc. See if that improves the battery life. Then try syncing back applications a couple at a time. Something seems to be locking in the processor which is draining the battery.
Do you live in an area where there are Apple Stores? If so, try making an appointment with the Genius Bar to have the device checked out. -
I have reset my iphone 5c and now it has the apple logo on the screen. Nothing is happening, apart from the screen going off for a few seconds, only to go back to black screen and white apple log. I have tried holding home and lock buttons for 10 seconds, but to no avail. I did a reset on settings as the IOS 8 was just slowing down my phone horrendously. How do i sort this please ?
Hi MartinH78,
If your iPhone isn't responding or won't start up past the Apple logo, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Not responding or does not turn on
Regards,
- Brenden -
My ipod touch is blocked with the apple logo on the screen
How can i unblock my ipod touch? I rebooted it and has got blocked with the apple logo on the screen.
The computer does not "see" it although it is connected.Try here:
iPhone and iPod touch: Frozen and unresponsive -
my ipod toch 2g 3.1.3 is stuck on apple logo withe the shutdown ring after that i restore to the original settings and its not tern on plese if somone can halp my plzzzzzz
Did you already try to connect in recovery mode iPhone and iPod touch: Unable to restore or DFU mode Apple - Support - Discussions - DFU/Recovery mode
-
My ipad 1 isnt working it is just showing the apple logo on the screen can anyone help me?
my ipad 1 isnt working it is just showing the apple logo on the screen can anyone help me?
If you can help me facetime me at [email protected] or msg me.It would help to know whether it ever did work, or is this a new iPad for you? If new, you need to connect it to a Mac/PC that's running iTunes in order to register and initialize it. If it used to work, try doing a reset.
-
Iphone jammed with the apple logo on the screen
hi i need help my iphone 3gs is jammed with the apple logo on the screen.
i was in the middle on sync wit my laptop to update v4.2 wen my usb cable was accidentally disconnect frm the port and nw my iphone is jammed wit the apple loga appeared on the screen.. i tried pressing all the button that is available like the home button the on,off button but to no respond frm my iphone.. plz in need of help real badly....Hey
I had the same thing that my iphone 3gs jammed with the loge on the screen. None of the buttons responded. I just waited till the battery was empty. But the battery wasn't laoding. I waited 48h while my iphone was plugged in. After the 48 hours he just started. The battery was still empty but it started loading.
Hope yours will work again also
bye -
hi, I reset my iphone 3gs, and it brought an apple logo on the screen so I restored it to version 6.0 but it can not accept a sim or connect to itunes for activation.what do I do, please help me
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work. -
I have downloaded ios 6 on my ipad 2 but it wouldn't install and now my ipad won't work (just has the apple logo on the screen periodically) and it won't reset. Any ideas folks? Thanks in advance.
Try restoring the device using iTunes. Connect the iPad to your computer and when iTunes opens, select your device on the left side, then click on the summary tab, then click on Restore.
After the device is restored you will have an opportunity to restore from your backup. Restore from the backup when you are done and then sync with iTunes.
if that doesn't work, try recovery mode.
http://support.apple.com/kb/ht4097 -
imac intel 10.4 wont start up. i don't get apple logo as the screen just goes white. i can hear click-click-click then a question mark instead of apple logo. if i insert install cd 1 i get apple logo and install instructions with no hardrive logo to install on
Yikes, sounds like the Hard Drive is dying.
Which exact iMac is it?
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
http://www.chipmunk.nl/klantenservice/applemodel.html
http://www.appleserialnumberinfo.com/Desktop/index.php
How to find the serial number of your Apple hardware product...
http://support.apple.com/kb/HT1349 -
My Ipod is frozen. I've tried holding the power and the sleep button for 10 sec until the apple came on the screen. After this i've tried again to turn it off and to slide the unlock button, but it didn't work! Any Ideas????
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hi
I've just reset my iPhone 4s as I was planning to sell it on. After the normal stuff you see on a reset I've been left with a phone that just has the apple logo on the black screen and it appears to be frozen and wont do anything?? any ideas?
I've tried holding down top button and round button which makes it go off but as soon as you push top button again it comes back and again its frozen.
Thanks for any ideas in advance?You need to put your iPhone into recovery mode to restore it: If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
-
I have a mac book pro with retina,I haven't turned it on in a couple of months.no problems then, now when I try to turn it on i only get apple logo and progress bar. After a few mins the laptop just turns off and nothing eles.any help would be appreciated thanks
I linked to it above, but here is another link.
http://support.apple.com/en-us/HT201262
Maybe you are looking for
-
Lost password for Apple ID and the email on record is no longer valid
Hi, I have to apple accounts, one for Mexico, where I live, and one for the US Store, where I made some purchases. I just bought a new computer and would like to transfer all of my iTunes related files to the new computer. However, I do not remember
-
Hi, Has anyone being successful in accessing a compact flash (CF) card using any OTG cable? If yes, can you tell me how you did it? Which cable you used? Thanks in advance, Partha
-
Passing field-symbols to a function module
Hey experts. In this scenario I am in the need to pass two buffer fieldsymbols (one contains a string, the other one a table) from my main programm to a function module. The main programm handles the user input and double-loops the function call with
-
Email Notification need anyone changes the PCD content..
Hello, Can someone give me a solution for this issue. An email should be sent to a person if someone has changed the PCD content. Can be an iveiw property, role property, workset property etc,. Or if any thing is created or modified in PCD i should g
-
Adding keyframes to the opacity layer?
I want to add keyframes to the opacity layer. I double click on the image in the Viewer, go to the frame I want, and use Control + K to add a keyframe, though it is not being added to the opacity layer, just the other layers. How do I add it there? T